Range of brass stopcocks. Compression connections, to be used with copper pipe EN1057 only. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

2304375

Size:

16.20142.812.CP5R-8510 - 15MM X 25MM BRASS, 16.20142.851.CP5R-8510 - 20MM X 25MM BRASS, 16.20142.831.CP5R-8510 - 22MM X 25MM BRASS, 16.20102.840.CP5R-8510 - 25MM X 25MM BRASS, 16.20142.812.CP5R-8511 - 15MM X 25MM DZR, 16.20142.851.CP5R-8511 - 20MM X 25MM DZR, 16.20142.831.CP5R-8511 - 22MM X 25MM DZR, 16.20102.840.CP5R-8511 - 25MM X 25MM DZR.

Marking:

PFP, size, EN1213, flow arrow, date of manufacture: MM-YY, EN1254-2, size stamped on body and nut.

Installation Requirements:

R001 R120

Expiry date:

30/04/2028

Model:

10145508 - 15MM X 25MM BRASS, 10145495 - 22MM X 25MM BRASS, 10145534 - 25MM X 25MM BRASS,

Approval Holder:

Primaflow F & P

Company Name

Primaflow F & P

Address

Votec House, Hambridge Lane, Newbury

Postcode

RG14 5TN

Country

United Kingdom

View All Listings by this Company

‘BOSS VENTURI’ range of regulating valves with DZR brass bodies, PTFE seats, EPDM ‘O’-rings and washer. The product incorporates two test ports. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

241002003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Claims made by the manufacturer for flow rate have not been tested and are not considered part of the approval listing.

Marking:

BOSS Venturi, size and pressure on handle. Size, DR, pressure and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

900S ProFlow Venturi FODRV range: 15008 (1/2" UL Commissioning valve): ½" BSPP (F)x(F), 15006 (1/2" SL Commissioning valve): ½" BSPP (F)x(F), 15000 (1/2" SS Commissioning valve): ½" BSPP (F)x(F), 16404 (1/2” SH Commissioning valve): ½" BSPP (F)x(F), 15007 (3/4" SL Commissioning valve): ¾ BSPP (F)x(F), 15001 (3/4" SS Commissioning valve): ¾ BSPP (F)x(F), 16405 (3/4" SH Commissioning valve): ¾ BSPP (F)x(F), 15002 (1" SS Commissioning valve): 1" BSPP (F)x(F), 15181 (1" SH Commissioning valve): 1" BSPP (F)x(F), 15003 (1.1/4" SH Commissioning valve): 1¼" BSPP (F)x(F), 15004 (1.1/2" SH Commissioning valve): 1½" BSPP (F)x(F), 15005 (2" SH Commissioning valve): 2" BSPP (F)x(F). Where: UL = ultra low flow, SL = low flow, SS = standard flow, SH = high flow.

Approval Holder:

BSS Industrial

Company Name

BSS Industrial

Address

Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of balancing valves with DZR brass bodies with two test ports, incorporating a non-rising spindle headwork. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

241004003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Caleffi, DN, PN, CR, flow arrow on body. Caleffi, +/-, and size on cap.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

130400: ½” x ½” BSP (F). 130500: ¾” x ¾” BSP (F). 130600: 1” x 1” BSP (F). 130700: 1¼” x 1¼” BSP (F). 130800: 1½” x 1½” BSP (F). 130900: 2” x 2” BSP (F).

Approval Holder:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Manufacturer:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

'61300 EPOXY TB BT BLEU 5005'. Factory applied, blue coloured epoxy powder coating. Spray apply as per manufacturers TDS dated '15/2/2019'. Cure for 20 minutes@160°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

240755033

Expiry date:

31/07/2029

Approval Holder:

Inver Spa

Company Name

Inver Spa

Address

Vai Di Corticella 205, 40128 Bologna

Country

Italy

Phone

+39 051.6380.411 Fax: +39 051 6606888

View All Listings by this Company

'Sikagard® 1816 (formerly known MasterProtect® 1816)'. Site applied, grey coloured (once applied), two-component Epoxy polysulfide coating. Mix parts A & B in a 78:22 weight ratio and apply coat 1 as per manufacturer’s general method statement ‘MS - AD - Sikagard®-1816-01/2024’ and PDS '020303000000002044 Version 01.01', dated April 2024. Cure coat 1 for 9 hours@25°C. Mix parts A & B in a 78:22 weight ratio and apply coat 2 as per manufacturer’s general method statement ‘MS - AD - Sikagard®-1816-01/2024’ and PDS '020303000000002044 Version 01.01', dated April 2024. Cure coat 2 for 14 days@25°C. For use with water up to 23°C. This material is only approved for the mixing & curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2307543

Expiry date:

31/07/2028

Approval Holder:

SIKA UAE LLC/Sika MB Construction Chemicals L.L.C

Company Name

SIKA UAE LLC/Sika MB Construction Chemicals L.L.C

Address

Head Office: P.O. Box 37127, Dubai Investment Park, Phase 1 Expo Road, Dubai

Country

United Arab Emirates

View All Listings by this Company