Range of plastic shower handsets available in various finishes. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2312387

Note:

Open Outlet use only.

Size:

½” BSP (M).

Marking:

Banomi on handset

Installation Requirements:

R001 R040

Expiry date:

31/12/2028

Model:

112500/79A

Approval Holder:

Idrosanitaria Bonomi SpA

Company Name

Idrosanitaria Bonomi SpA

Address

Via Monsuello, 36 Lumezzane S.S Brescia

Postcode

25065

Country

Italy

Phone

+39 030 8922111

General Email

massimoplati@idrobonomi.com

View All Listings by this Company

Concealed, wall mounted elbow fitting with a brass body incorporating EDPM `O`-rings. Maximum working pressure: 10.0 Bar. Maximum operating temperature: 70.0°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240502014

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

Dornbracht and DR on body.

Installation Requirements:

R001 R040

Expiry date:

31/05/2029

Model:

3508597090

Product Images

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Drain valve with a DZR brass body and rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

2406900

Size:

15mm spigot

Marking:

Intatec logo & CR on body

Installation Requirements:

R001 R511

Expiry date:

1/07/2029

Model:

WMDOC

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Range of drain valves with bronze bodies, EPDM seat and ‘O’-rings. The products incorporate a rising spindle operating mechanism and a hose union outlet connection. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

240502001

Size:

½” BSP (M) or ¾” BSP (M).

Marking:

Boss, BS, Size, H and GM on body

Installation Requirements:

R001 R511

Expiry date:

31/05/2029

Model:

BOSS Fig No. 370 Screwed BSPT Drain Cock, BOSS Fig No. 371 Screwed BSPT Lock Shield Drain Cock

Approval Holder:

BSS Industrial

Company Name

BSS Industrial

Address

Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Manufacturer:

Y.S. Valve Manufacturing Co. Ltd.

Company Name

Y.S. Valve Manufacturing Co. Ltd.

Address

General Email

View All Listings by this Company

Range of drain taps with brass or DZR brass body (some models chrome plated) and rising spindle headwork. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

240204036

Size:

see model

Marking:

V&G, size, date of manufacture (MM/YY) and WRAS on body. Models DZR brass models are also marked with CR.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

Models with DZR brass body: 26.10312.015.CP5R-8511 (natural): 15mm tail. 26.10312.015.CP03-8511 (chrome plated): 15mm tail. 26.10512.015.CP5R-8511 (natural): 15mm tail. 26.10512.015.CP03-8511 (chrome plated): 15mm tail. 26.10132.G15.CP5R-8511 (natural): ½” BSP (M). 26.10132.G15.CP03-8511 (chrome plated): ½” BSP (M). 26.10132.G20.CP5R-8511 (natural): ¾” BSP (M). 26.10132.G20.CP03-8511 (chrome plated): ¾” BSP (M). Models with HPb59-3 brass body: 26.10312.015.CP5R-8510 (natural): 15mm tail. 26.10312.015.CP03-8510 (chrome plated): 15mm tail. 26.10512.015.CP5R-8510 (natural): 15mm tail. 26.10512.015.CP03-8510 (chrome plated): 15mm tail. 26.10132.G15.CP5R-8510 (natural): ½” BSP (M). 26.10132.G15.CP03-8510 (chrome plated): ½” BSP (M). 26.10132.G20.CP5R-8510 (natural): ¾” BSP (M). 26.10132.G20.CP03-8510 (chrome plated): ¾” BSP (M).

Approval Holder:

Zhejiang Valogin Technology Co. Ltd.

Company Name

Zhejiang Valogin Technology Co. Ltd.

Address

Qinggang Technological Ind. Zone, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Valogin Technology Co. Ltd.

Company Name

Zhejiang Valogin Technology Co. Ltd.

Address

Qinggang Technological Ind. Zone, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

A Range of drain valves with bronze bodies incorporating brass bonnets, stems and baffles with EPDM seats and O’-rings. The products incorporate a rising spindle operating mechanism. Maximum working pressure 16.0bar. Maximum operating temperature 85°C.

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

241108001

Size:

See models.

Marking:

Albion Logo, BS2879/2 Cast onto the body.

Installation Requirements:

R001 R511

Expiry date:

30/11/2029

Model:

Albion ART 310 Bronze Drain Cock MBSP – BS 2879/2 - ½” or ¾” iso 7/1 male taper thread rising spindle. Albion ART 311 Bronze Drain Cock MBSP Lockshield – BS 2879/2 - ½” or ¾” iso 7/1 male taper thread rising spindle.

Approval Holder:

Albion Valves (UK) Limited

Company Name

Albion Valves (UK) Limited

Address

9a Fallbank Industrial Estate Dodworth Barnsley

Postcode

S75 3LS

Country

United Kingdom

Phone

01226 729900

General Email

samjed@albionvalvesuk.com

View All Listings by this Company

Manufacturer:

Albion Valves (UK) Limited

Company Name

Albion Valves (UK) Limited

Address

9a Fallbank Industrial Estate Dodworth Barnsley

Postcode

S75 3LS

Country

United Kingdom

Phone

01226 729900

General Email

samjed@albionvalvesuk.com

View All Listings by this Company

Range of draining taps with DZR brass bodies. Incorporating a rising spindle headwork, EPDM or NBR seals and washers. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

2304099

Size:

See Models

Marking:

Conex, CR and size on body.

Installation Requirements:

R001 R511

Expiry date:

30/04/2028

Model:

DZR Brass Models: S746 (15mm Spigot) S742 (1/2” BSP (M))

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of drain taps with brass body and rising spindle headwork. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

240204066

Size:

see model

Marking:

TS, size, date of manufacture (MM/YY) and WRAS on body.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

HPb59-3 brass body: 96526 (natural): 15mm tail. 83905 (natural): ½” BSP (M).

Approval Holder:

Toolstation Ltd.

Company Name

Toolstation Ltd.

Address

Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Self-closing combination tap assembly (chromium plated brass) with a spring-loaded headwork controlling both temperature and flow with a dome type operating member. The spout outlet incorporates a plastic flow straightener. The flexible hose inlets incorporate a combined EPDM washer and stainless-steel strainer, as well as an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

240604001

Size:

Stainless steel or polyamide braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Inta on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/06/2029

Model:

NC230CP

Product Images

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Manufacturer:

Idral S.p.A.

Company Name

Idral S.p.A.

Address

Via Isei, 8/10 - I-28010 Gargallo (NO)

Country

Italy

Phone

+39 0322 912017

General Email

View All Listings by this Company

Range of nylon braided (DG50X model series) or stainless steel braided (DG10X model series), PEX lined flexible hose assemblies with a variety of end connections (see models for full breakdown), including EPDM washers and ‘O’-rings where applicable. Some models are supplied with screwdriver operated isolation valves (see model list). All compression and push-fit fittings are to be used with copper pipe (manufactured to EN 1057). Maximum working pressure: 16 bar. Maximum operating temperature: 85°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240402029

Size:

See models below. Note: Comp = compression, PF = push-fit

Marking:

Fanski, WRAS and year of manufacture (YYYY) on ferrule

Installation Requirements:

R001 R008

Expiry date:

30/04/2029

Model:

DG50X-WRAS-200-L - 15mm comp x M10 short, DN8 DG10X-WRAS-400-L - 15mm comp x M10 short, DN8 DG50X-WRAS-201-L - 15mm comp x M12 short, DN8 DG10X-WRAS-401-L - 15mm comp x M12 short, DN8 DG50X-WRAS-202-L - ⅜” BSP (F) x 10mm comp, DN10 DG10X-WRAS-402-L - ⅜” BSP (F) x 10mm comp, DN10 DG50X-WRAS-203-L - ½” BSP (F) elbow x 15mm comp, DN10 DG10X-WRAS-403-L - ½” BSP (F) elbow x 15mm comp, DN10 DG50X-WRAS-204-L - ½” BSP (F) x ½” BSP (F), DN10 DG10X-WRAS-404-L - ½” BSP (F) x ½” BSP (F), DN10 DG50X-WRAS-205-L - ½” BSP (F) x 15mm comp iso valve, DN10 DG10X-WRAS-405-L - ½” BSP (F) x 15mm comp iso valve, DN10 DG50X-WRAS-206-L - 15mm PF x 15mm PF iso valve, DN10 DG10X-WRAS-406-L - 15mm PF x 15mm PF iso valve, DN10 DG50X-WRAS-207-L - ¾” BSP (F) x 22mm comp iso valve, DN13 DG10X-WRAS-407-L - ¾” BSP (F) x 22mm comp iso valve, DN13 DG50X-WRAS-208-L - ¾” BSP (F) x 22mm comp, DN13 DG10X-WRAS-408-L - ¾” BSP (F) x 22mm comp, DN13 DG50X-WRAS-209-L - 22mm PF x 22mm PF iso valve, DN13 DG10X-WRAS-409-L - 22mm PF x 22mm PF iso valve, DN13 DG50X-WRAS-210-L - ⅜” BSP (F) x 15mm comp, DN10 DG10X-WRAS-410-L - ⅜” BSP (F) x 15mm comp, DN10 DG50X-WRAS-211-L - ½” BSP (F) x 15mm comp, DN10 DG10X-WRAS-411-L - ½” BSP (F) x 15mm comp, DN10 DG50X-WRAS-212-L - 10mm comp x 15mm comp, DN10 DG10X-WRAS-412-L - 10mm comp x 15mm comp, DN10 DG50X-WRAS-213-L - 15mm comp x 15mm comp, DN10 DG10X-WRAS-413-L - 15mm comp x 15mm comp, DN10 DG50X-WRAS-214-L - ¾” BSP (F) x 15mm comp, DN10 DG10X-WRAS-414-L - ¾” BSP (F) x 15mm comp, DN10 DG50X-WRAS-215-L - 15mm comp x 22mm comp, DN10 DG10X-WRAS-415-L - 15mm comp x 22mm comp, DN10 DG50X-WRAS-216-L - ½” BSP (F) x 22mm comp, DN10 DG10X-WRAS-416-L - ½” BSP (F) x 22mm comp, DN10 DG50X-WRAS-217-L - ¾” BSP (F) x 15mm comp iso valve, DN10 DG10X-WRAS-417-L - ¾” BSP (F) x 15mm comp iso valve, DN10 DG50X-WRAS-218-L - 15mm PF x M10x1 short, DN10 DG10X-WRAS-418-L - 15mm PF x M10x1 short, DN10 DG50X-WRAS-219-L - 15mm PF x M12x1 short, DN10 DG10X-WRAS-419-L - 15mm PF x M12x1 short, DN10 DG50X-WRAS-220-L - ¾” BSP (F) x 15mm PF, DN10 DG10X-WRAS-420-L - ¾” BSP (F) x 15mm PF, DN10 DG50X-WRAS-221-L - 15mm PF x ½” BSP (F) elbow, DN10 DG10X-WRAS-421-L - 15mm PF x ½” BSP (F) elbow, DN10 DG50X-WRAS-222-L - 15mm comp x 15mm PF, DN10 DG10X-WRAS-422-L - 15mm comp x 15mm PF, DN10 DG50X-WRAS-223-L - 15mm PF x 15mm PF, DN10 DG10X-WRAS-423-L - 15mm PF x 15mm PF, DN10 DG50X-WRAS-224-L - ¾” BSP (F) x ¾” BSP (F), DN13 DG10X-WRAS-424-L - ¾” BSP (F) x ¾” BSP (F), DN13 DG50X-WRAS-225-L - 22mm comp x 22mm comp, DN13 DG10X-WRAS-425-L - 22mm comp x 22mm comp, DN13 DG50X-WRAS-226-L - 22mm PF x 22mm comp, DN13 DG10X-WRAS-426-L - 22mm PF x 22mm comp, DN13 DG50X-WRAS-227-L - 22mm PF x 22mm PF, DN13 DG10X-WRAS-427-L - 22mm PF x 22mm PF, DN13 DG50X-WRAS-228-L - ½” BSP (F) x M10 short, DN8 DG10X-WRAS-428-L - ½” BSP (F) x M10 short, DN8 DG50X-WRAS-229-L - ⅜” BSP (F) x M10 short, DN8 DG10X-WRAS-429-L - ⅜” BSP (F) x M10 short, DN8 DG50X-WRAS-230-L - 15mm comp x 15mm comp iso valve, DN10 DG10X-WRAS-430-L - 15mm comp x 15mm comp iso valve, DN10 DG50X-WRAS-231-L - ¾” BSP (F) x ¾” BSP (F) elbow, DN10 DG10X-WRAS-431-L - ¾” BSP (F) x ¾” BSP (F) elbow, DN10 DG50X-WRAS-232-L - ⅜” BSP (F) X ⅜” BSP (F), DN8 DG10X-WRAS-432-L - ⅜” BSP (F) X ⅜” BSP (F), DN8 DG50X-WRAS-233-L - ⅜” BSP (F) X ⅜” BSP (F) elbow, DN8 DG10X-WRAS-433-L - ⅜” BSP (F) X ⅜” BSP (F) elbow, DN8 DG50X-WRAS-234-L - ⅜” BSP (F) x ¼" BSP (F), DN8 DG10X-WRAS-434-L - ⅜” BSP (F) x ¼" BSP (F), DN8 DG50X-WRAS-235-L - ½” BSP (F) x ½" BSP (M), DN13 DG10X-WRAS-435-L - ½” BSP (F) x ½" BSP (M), DN13 DG50X-WRAS-236-L - 15mm comp x ½” BSP (M), DN13 DG10X-WRAS-436-L - 15mm comp x ½” BSP (M), DN13 DG50X-WRAS-237-L - ¾” BSP (F) x ¾" BSP (M), DN13 DG10X-WRAS-437-L - ¾” BSP (F) x ¾" BSP (M), DN13 DG50X-WRAS-238-L - ½” BSP (F) x ½” BSP (F) elbow, DN10 DG10X-WRAS-438-L - ½” BSP (F) x ½” BSP (F) elbow, DN10 DG50X-WRAS-239-L - ½” BSP (F) x ½” BSP (M), DN8 DG10X-WRAS-439-L - ½” BSP (F) x ½” BSP (M), DN8 DG50X-WRAS-240-L - ½” BSP (F) x ½” BSP (F), DN8 DG10X-WRAS-440-L - ½” BSP (F) x ½” BSP (F), DN8 DG50X-WRAS-241-L - ½” BSP (F) x 15mm comp iso valve, DN13 DG10X-WRAS-441-L - ½” BSP (F) x 15mm comp iso valve, DN13 DG50X-WRAS-242-L - ½” BSP (F) x ½” BSP (F), DN13 DG10X-WRAS-442-L - ½” BSP (F) x ½” BSP (F), DN13 DG50X-WRAS-243-L - ½” BSP (F) x 15mm comp, DN13 DG10X-WRAS-443-L - ½” BSP (F) x 15mm comp, DN13 DG50X-WRAS-244-L - 22mm comp x 22mm comp iso valve, DN13 DG10X-WRAS-444-L - 22mm comp x 22mm comp iso valve, DN13 DG50X-WRAS-245-L - 15mm comp x 15mm comp, DN13 DG10X-WRAS-445-L - 15mm comp x 15mm comp, DN13 DG50X-WRAS-246-L - 15mm comp x M12x1 short, DN10 DG10X-WRAS-446-L - 15mm comp x M12x1 short, DN10 DG50X-WRAS-247-L - ½” BSP (F) x 14.7mm comp iso valve, DN10 DG10X-WRAS-447-L - ½” BSP (F) x 14.7mm comp iso valve, DN10 DG50X-WRAS-248-L - ¾” BSP (F) x 21mm comp iso valve, DN13 DG10X-WRAS-448-L - ¾” BSP (F) x 21mm comp iso valve, DN13 DG50X-WRAS-249-L - 15mm comp x M12x1 long, DN10 DG10X-WRAS-449-L - 15mm comp x M12x1 long, DN10 DG50X-WRAS-250-L - ½” BSP (F) x M12x1 short, DN8 DG10X-WRAS-450-L - ½” BSP (F) x M12x1 short, DN8 DG50X-WRAS-251-L - ½” BSP (F) x 15mm PF, DN10 DG10X-WRAS-451-L - ½” BSP (F) x 15mm PF, DN10 DG50X-WRAS-252-L - ½” BSP (F) x 15mm PF iso valve, DN10 DG10X-WRAS-452-L - ½” BSP (F) x 15mm PF iso valve, DN10 DG50X-WRAS-253-L - ¾” BSP (F) x 22mm PF, DN13 DG10X-WRAS-453-L - ¾” BSP (F) x 22mm PF, DN13 DG50X-WRAS-254-L - ¾” BSP (F) x 22mm PF iso valve, DN13 DG10X-WRAS-454-L - ¾” BSP (F) x 22mm PF iso valve, DN13 DG50X-WRAS-255-L - ½” BSP (F) x 15mm PF, DN13 DG10X-WRAS-455-L - ½” BSP (F) x 15mm PF, DN13 DG50X-WRAS-256-L - ¾” BSP (F) x 15mm PF, DN13 DG10X-WRAS-456-L - ¾” BSP (F) x 15mm PF, DN13 DG50X-WRAS-257-L - ⅜” BSP (F) x M10x1 short, DN6 DG10X-WRAS-457-L - ⅜” BSP (F) x M10x1 short, DN6 DG50X-WRAS-258-L - ½” BSP (F) x M10x1 short, DN6 DG10X-WRAS-458-L - ½” BSP (F) x M10x1 short, DN6 DG50X-WRAS-259-L - ⅜” BSP (F) x M8x1 short, DN6 DG10X-WRAS-459-L - ⅜” BSP (F) x M8x1 short, DN6 DG50X-WRAS-260-L - ½” BSP (F) x M10x1 short, DN6 DG10X-WRAS-460-L - ½” BSP (F) x M10x1 short, DN6 DG50X-WRAS-261-L - ⅜” BSP (F) x M8x1 short, DN6 DG10X-WRAS-461-L - ⅜” BSP (F) x M8x1 short, DN6 DG50X-WRAS-262-L - ½” BSP (F) x 15mm PF, DN13 DG10X-WRAS-462-L - ½” BSP (F) x 15mm PF, DN13 DG50X-WRAS-263-L - ¾” BSP (F) x 15mm PF, DN13 DG10X-WRAS-463-L - ¾” BSP (F) x 15mm PF, DN13 DG50X-WRAS-264-L - M12x1 short x M8x1 short DG10X-WRAS-464-L - M12x1 short x M8x1 short DG50X-WRAS-265-L - M12x1 short x M8x1 short DG50X-WRAS-465-L - M12x1 short x M8x1 short DG50X-WRAS-266-L - F ½” BSP x 15mm push-fit iso valve DG50X-WRAS-466-L - F ½” BSP x 15mm push-fit iso valve Models added April 2025 DG10X-376-006-L, ½” BSP (F) x M8x1 short, DN6 DG10X-376-008-L, ½” BSP (F) x M8x1 short, DN8 DG50X-376-010-L, ½” BSP (F) x M8x1 short, DN6 DG50X-376-012-L, ½” BSP (F) x M8x1 short, DN8

Product Images

Approval Holder:

Fanski Group Inc

Company Name

Fanski Group Inc

Address

NO.7,SHENGYUAN ROAD,YUCHENG STREET, YUHUAN CITY,ZHEJIANG PROVINCE,CHINA 317600

Country

China

View All Listings by this Company

Manufacturer:

Fanski Group Inc

Company Name

Fanski Group Inc

Address

NO.7,SHENGYUAN ROAD,YUCHENG STREET, YUHUAN CITY,ZHEJIANG PROVINCE,CHINA 317600

Country

China

View All Listings by this Company