‘Subcote FLP II’. Site applied, two-component, green coloured (once mixed and applied) Polyurethane coating. Mix parts A & B in a 100:72 weight ratio and apply & then flush as per manufacturer's IFU 'IFU_Subcote FLP II_In-Situ Pipes_Issue 7_210921 RS EN'. Cure for 1 hour@3°C. For use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

240355010

Expiry date:

31/03/2029

Approval Holder:

Radius Systems Limited

Company Name

Radius Systems Limited

Address

Radius House, Berristow Lane, South Normanton, Alfreton, Derbyshire

Postcode

DE55 2JJ

Country

United Kingdom

Phone

01773582303

General Email

richard.marks@radius-systems.com

View All Listings by this Company

‘Sikagard®-1814 - RAL 7035’. Site applied, grey coloured (once mixed), two-component epoxy polysulfide resin coating. Mix Part A (light grey, opaque liquid) and Part B (light yellow, translucent liquid) in a 78:22 weight ratio and apply 2 coats as per manufacturer’s TDS ‘MBS_CC-UAE/Pr_1814_06_23/v1/01_24’. Cure coat 1 for 9 hours@25°C. Cure coat 2 for 14 days@25°C. For use with water up to 50°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5046 Coatings, Paints & Linings

Section Subtitle:

Site applied cistern coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2307541

Expiry date:

31/07/2028

Approval Holder:

SIKA UAE LLC/Sika MB Construction Chemicals L.L.C

Company Name

SIKA UAE LLC/Sika MB Construction Chemicals L.L.C

Address

Head Office: P.O. Box 37127, Dubai Investment Park, Phase 1 Expo Road, Dubai

Country

United Arab Emirates

View All Listings by this Company

'Klinger K49'. Black coloured, braided compression packing. For use with water up to 85°C. For use only as a gland packing material having been tested at a reduced surface area to volume ratio.

Section:

5100 Gland Packings

Expiry date:

28/02/2029

Approval Holder:

Klinger Ltd.

Company Name

Klinger Ltd.

Address

Wharfedale Road, Euroway Trading Estate, Bradford, Bradford

Phone

Tel: 01274 688222

View All Listings by this Company

'Graphalloy Bushing Grade GM 690'. Grey coloured, resin impregnated, carbon/graphite material. For use with water up to 23°C.

Section:

5135 Graphite

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240355005

Expiry date:

31/03/2029

Approval Holder:

Graphite Metallizing Corp.

Company Name

Graphite Metallizing Corp.

Address

1050 Nepperhan Avenue, Yonkers, NY 10703

Country

USA

View All Listings by this Company

'REGZ09 - Premier Giant Silicone Spray'. Clear liquid lubricant. Apply as per manufacturer`s instructions which appear on the spray packaging. For use with water up to 85°C

Section:

5160 Lubricants

Expiry date:

28/02/2029

Approval Holder:

Regin Products Limited

Company Name

Regin Products Limited

Address

8-13 Tower Square, Huntingdon, Cambridgeshire

Postcode

PE29 7DT

Phone

+44 (0) 1480 412415

General Email

sales@regin.co.uk

View All Listings by this Company