Directory Search Results

Fittings Materials
Print List

#2007376

Cold water inlet control group with a DZR brass body consisting of a pressure reducing valve, (adjustable between 2.7 and 3.3 bar, but factory set at 3.0 bar), a stainless steel strainer and a plastic bodied pressure relief valve (pre-set at 8.0 bar). The product incorporates a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The pressure relief valve is fitted with a rotary type easing gear. Maximum supply pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2007376
Size:
22mm compression
Marking:
Caleffi, CR and flow arrow on body.
Installation Requirements:
R001 R120
Expiry date:
31/07/2025
Model:
533121H CST
Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval

#2007055

Range of bedpan macerators. The flow is controlled by solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2360 Washing Machines
Section Subtitle:
Bedpan and disinfecting. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2007055
Size:
PVC lined flexible hose assembly with ¾” BSP captive nut end connections
Marking:
DDC Dolphin logo and model on control panel. Model on front panel.
Installation Requirements:
R001 R009 R520 R574
Expiry date:
31/07/2025
Model:
Pulpmatic Ultima, Eco & Uno. Incomatic. Panamatic Mini & Midi. Panamatic Optima 2.
Product Images
Approval Holder:
DDC Dolphin Ltd.
Company Name
DDC Dolphin Ltd.
Address
The Fulcrum, Vantage Way, Poole
Postcode
BH12 4NU
Country
Dorset,
Phone
+44 (0)1202 724858

View All Listings by this Company
Manufacturer:
DDC Dolphin Ltd.
Company Name
DDC Dolphin Ltd.
Address
The Fulcrum, Vantage Way, Poole
Postcode
BH12 4NU
Country
Dorset,
Phone
+44 (0)1202 724858

View All Listings by this Company

Print This Approval

#2007353

Commercial clothes washing machine having a flexible inlet hose and solenoid valve with filter at the inlet supplying a Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2370 Washing Machines
Section Subtitle:
Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2007353
Size:
3/8” BSP (F) captive nut
Marking:
Haier, (WE1100P) printed on dial. Haier, model no, production no and other information on data label.
Installation Requirements:
R001 R150 R574
Expiry date:
31/07/2025
Model:
WE1100P(CN)
Product Images
Approval Holder:
Qingdao Haier Drum Washing Machine Co., Ltd.
Company Name
Qingdao Haier Drum Washing Machine Co., Ltd.

View All Listings by this Company

Print This Approval

#2007381

Commercial clothes washing machine having a flexible inlet hose and solenoid valve with filter at the inlet supplying a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2370 Washing Machines
Section Subtitle:
Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2007381
Size:
3/8” BSP (F) captive nut
Marking:
Electrolux on front of machine Electrolux, model no, production no and other information on data label.
Installation Requirements:
R001 R150 R574
Expiry date:
31/07/2025
Model:
WE1100P
Approval Holder:
Electrolux Professional SpA
Company Name
Electrolux Professional SpA
Address
Via Segaluzza 30 33170 Pordenone Italy

View All Listings by this Company

Print This Approval

#2007074

Range of commercial dish washing machines. Flow is controlled by a solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The product is supplied with stainless steel or nylon braided EPDM inlet hose. Maximum working pressure 4.0 bar. Cold water use only.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2007074
Size:
Stainless steel braided EPDM lined flexible hose assembly with ¾” BSP captive nut end connection
Marking:
Colged, Eurotec, model and other product info on adhesive label on body.
Installation Requirements:
R001 R574
Expiry date:
31/07/2025
Model:
ISYTECH 31-11.1 ISYTECH 31-11.2 PROTECH 31-21.1 PROTECH 31-21.2 PROTECH31-21.3 TOPTECH 31-22.1 TOPTECH 31-22.2 TOPTECH 31-22.3
Product Images
Approval Holder:
Eurotec Srl div Colged
Company Name
Eurotec Srl div Colged
Address
Via Provinciale Romana 6-55010 Badia Pozzeveri Italy

View All Listings by this Company
Manufacturer:
Eurotec Srl div Colged
Company Name
Eurotec Srl div Colged
Address
Via Provinciale Romana 6-55010 Badia Pozzeveri Italy

View All Listings by this Company

Print This Approval

#2009044

Range of ultraviolet disinfection units incorporating isolation valves and draw off tapes. Maximum working pressure 16.0 bar. Maximum operating temperature 50ºC.

Section:
2411 Disinfection Equipment
Size:
See model
Marking:
HYDROTEC, model, serial number, date of manufacture (YYYY), DN, max pressure and other product info on label on body.
Installation Requirements:
R001 R120 R150 R170 R290
Expiry date:
30/09/2025
Model:
HydroWELL Select 20: DN 100 HydroWELL Select 30: DN 100 HydroWELL Select 50: DN 150
Product Images
Approval Holder:
Hydrotec International Water Treatment Limited
Company Name
Hydrotec International Water Treatment Limited
Address
38 Main Street Swords Country Dublin
Country
Ireland

View All Listings by this Company

Print This Approval

#2009047

Range of ultraviolet disinfection units with stainless steel bodies, quartz sleeves and silicone seals. Maximum working pressure 6.8 bar. Maximum operating temperature 40°C.

Section:
2411 Disinfection Equipment
Size:
¼” BSP (M) inlet/outlet – 2” BSP (M) inlet/outlet
Marking:
Spectrum, Sabre, model, product information on label on body.
Installation Requirements:
R001 R120 R150 R170 R290
Expiry date:
30/09/2025
Model:
SABRE SUV-S-4-1/4 SABRE SUV-S-8-1/2 SABRE SUV-30-3/4 SABRE SUV-57-1 SABRE SUV-132-2 SABRE SUV-250-2
Product Images
Approval Holder:
Spectrum
Company Name
Spectrum
Address
20/20 Business Park, Maidstone, Kent
Postcode
ME16 0LS
Country
United Kingdom
Phone
01622621940
General Email
jasmine@fileder.co.uk

View All Listings by this Company

Print This Approval

#2007061

Pressure vessel with spun fibre glass casing and polyethylene liner. Maximum working pressure 10.0 bar. Maximum operating temperature 70ºC.

Section:
2470 Water Softeners
Section Subtitle:
Components, pressure vessels.
WRAS Approval Number:
2007061
Size:
DN150 flange
Marking:
Pentair and logo, model, maximum pressure, maximum temperature and other product info on adhesive label on body.
Installation Requirements:
R001 R008
Expiry date:
31/07/2025
Model:
C-1468-F*HW
Product Images
Approval Holder:
Pentair International
Company Name
Pentair International
Address
Avenue de Sevelin 18 1004 Lausanne Switzerland
General Email
info@pentair.com

View All Listings by this Company
Manufacturer:
Pentair International
Company Name
Pentair International
Address
Avenue de Sevelin 18 1004 Lausanne Switzerland
General Email
info@pentair.com

View All Listings by this Company

Print This Approval

#2007073

Range of polyethylene pressure vessels with spun fibre glass casing. Maximum working pressure 10.0 Bar. Maximum operating temperature 50°C.

Section:
2470 Water Softeners
Section Subtitle:
Components, pressure vessels.
WRAS Approval Number:
2007073
Size:
2½” NPSM (F) & 4” NPSM (F)
Marking:
PENTAIR, maximum temperature, maximum pressure and other technical info on adhesive label on body.
Installation Requirements:
R001 R008
Expiry date:
31/07/2025
Model:
C-1443-A*-NI (Opening 4" Threaded), C-1452-A*-NI (Opening 4" Threaded), C-1465-A*-NI (Opening 4" Threaded), C-1649-A*-NI (Opening 4" Threaded), C-1665-A*-NI (Opening 4" Threaded), C-1865-A*-NI (Opening 4" Threaded), DPEX1018* (Opening 2.5" Threaded), DPEX1030* (Opening 2.5" Threaded), DPEX1035* (Opening 2.5" Threaded), DPEX1044* (Opening 2.5" Threaded), DPEX613* (Opening 2.5" Threaded), DPEX618* (Opening 2.5" Threaded), DPEX730* (Opening 2.5" Threaded), DPEX735* (Opening 2.5" Threaded), DPEX817* (Opening 2.5" Threaded), DPEX818* (Opening 2.5" Threaded), DPEX819* (Opening 2.5" Threaded), DPEX830* (Opening 2.5" Threaded), DPEX835* (Opening 2.5" Threaded), Q-0513-A* (Opening 2.5" Threaded), Q-0516-A* (Opening 2.5" Threaded), Q-0517-A* (Opening 2.5" Threaded), Q-0521-A* (Opening 2.5" Threaded), Q-0613-A* (Opening 2.5" Threaded), Q-0618-A* (Opening 2.5" Threaded), Q-0621-A* (Opening 2.5" Threaded), Q-0635-P* (Opening 2.5" Threaded), Q-0713-A* (Opening 2.5" Threaded), Q-0716-A* (Opening 2.5" Threaded), Q-0717-A* (Opening 2.5" Threaded), Q-0730-A* (Opening 2.5" Threaded), Q-0735-A* (Opening 2.5" Threaded), Q-0817-A* (Opening 2.5" Threaded), Q-0818-A* (Opening 2.5" Threaded), Q-0822-A* (Opening 2.5" Threaded), Q-0830-A* (Opening 2.5" Threaded), Q-0835-A* (Opening 2.5" Threaded), Q-0840-P* (Opening 2.5" Threaded), Q-0844-P* (Opening 2.5" Threaded), Q-0919-A* (Opening 2.5" Threaded), Q-0935-A* (Opening 2.5" Threaded), Q-1012-A* (Opening 2.5" Threaded), Q-1016-A* (Opening 2.5" Threaded), Q-1019-A* (Opening 2.5" Threaded), Q-1019-P* (Opening 2.5" Threaded), Q-1023-A* (Opening 2.5" Threaded), Q-1035-A* (Opening 2.5" Threaded), Q-1044-P* (Opening 2.5" Threaded), Q-1054-P* (Opening 2.5" Threaded), Q-1248-P* (Opening 2.5" Threaded), Q-1252-P* (Opening 2.5" Threaded), Q-1354-A* (Opening 2.5" Threaded), RT-0635-P* (Opening 2.5" Threaded), RT-0724-A* (Opening 2.5" Threaded), RT-0813-A* (Opening 2.5" Threaded), RT-0824-A* (Opening 2.5" Threaded), RT-0917-A* (Opening 2.5" Threaded), RT-0924-A* (Opening 2.5" Threaded), RT-0930-A* (Opening 2.5" Threaded), RT-0930-P* (Opening 2.5" Threaded), RT-0942-A* (Opening 2.5" Threaded), RT-0948-A* (Opening 2.5" Threaded), RT-1017-A* (Opening 2.5" Threaded), RT-1022-A* (Opening 2.5" Threaded), RT-1024-A* (Opening 2.5" Threaded), RT-1030-A* (Opening 2.5" Threaded), RT-1035-P* (Opening 2.5" Threaded), RT-1047-P* (Opening 2.5" Threaded), RT-1055-P*-NI (Opening 4" Threaded), RT-1344-A* (Opening 2.5" Threaded), RT-1355-A*-NI (Opening 4" Threaded), RT-1452-A*-NI (Opening 4" Threaded), RT-1465-A*-NI (Opening 4" Threaded), RT-1649-A*-NI (Opening 4" Threaded), RT-1665-A*-NI (Opening 4" Threaded), RT-1865-A*-NI (Opening 4" Threaded). A = open at top. P = different bottom shape. Ni = different inlet shape (to differentiate internal production from the previous inlet shape).
Product Images
Approval Holder:
Pentair International
Company Name
Pentair International
Address
Avenue de Sevelin 18 1004 Lausanne Switzerland
General Email
info@pentair.com

View All Listings by this Company
Manufacturer:
Pentair Water Belgium
Company Name
Pentair Water Belgium
General Email

View All Listings by this Company

Print This Approval

#2008515

'Delrin® FG500P NC010'. White coloured (opaque), injection moulded acetal material. For use with water up to 23°C.

Section:
5015 Acetal
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2008515
Expiry date:
31/08/2025
Approval Holder:
Delrin Switzerland Sàrl
Company Name
Delrin Switzerland Sàrl
Address
154-156 route du Nant d’Avril, CH-1217 Meyrin
Country
Switzerland

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 51 of 1108

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.