Directory Search Results

Print List

#2011318

Range of wall mounted non concussive shower valves with either a concealed or exposed brass body and chrome plated trim. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1820 Taps
Section Subtitle:
Self closing tap(s).
WRAS Approval Number:
2011318
Size:
15mm compression
Marking:
Deva on operating member. Flow arrow on body. DTC62 on body and Dev on operating member (model NCT00340)
Installation Requirements:
R001 R040
Expiry date:
30/11/2025
Model:
NCT002 (exposed) NCT003 (concealed) Model added January 2021: NCT00340 (concealed)
Product Images

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2011056

Range of self-closing basin taps (chromium plated brass) with spring loaded headwork and dome type operating members. The spout outlets incorporate a plastic aerator and the products are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60⁰C.

Section:
1820 Taps
Section Subtitle:
Self closing tap(s).
WRAS Approval Number:
2011056
Size:
9080GAMBO & 9091A - ½” BSP (M). 9080FLEX: Stainless steel braided EPDM lined hose with ½” BSP captive nut end connections.
Marking:
MCM and model on body.
Installation Requirements:
R001 R006
Expiry date:
30/11/2025
Model:
9080FLEX, 9080GAMBO & 9091A
Product Images

Approval Holder:
Rubinetterie MCM Intl. Srl.
Company Name
Rubinetterie MCM Intl. Srl.
Address
Via Dell'Acacia 54 I-28021 Borgomanero Italy

View All Listings by this Company
Manufacturer:
Rubinetterie MCM Intl. Srl.
Company Name
Rubinetterie MCM Intl. Srl.
Address
Via Dell'Acacia 54 I-28021 Borgomanero Italy

View All Listings by this Company

Print This Approval


#2012802

‘TAQ PEX’ range of PEX lined flexible hose assemblies with either stainless steel braiding or grey polymeric (PET - Polyethylene terephthalate) braiding (ACB suffix models). Models have either EPDM ‘O’-rings and/or EPDM or silicone washers (depending on end connection). Models are also available with an optional washer incorporating a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2012802
Size:
See model.
Marking:
Tucai, WRAS, year of manufacture (YY), manufacturing company (NT or TB) on ferrule.
Installation Requirements:
R001 R008
Expiry date:
31/12/2025
Model:
TAQ PEX DN6 Hose bore = DN6, Braiding = SS. End connections = M8x1, M10x1, M15x1, M15x1 captive nut, 3/8" captive nut, ½" captive nut, pipe end 10mm (LISO 10), clip 10, clip 11, M11x1, H 3/8" valv, M12x1, compression fitting 10mm, compression fitting 15mm, 3/8" BSP, 7/16UNS, clip 9, 9/16-24UNEF captive nut, 1/2-14 NPSM captive nut. TAQ PEX DN6 ACB Hose bore = DN6, Braiding = ACB. End connections = M8x1, M10x1, M15x1, M15x1 captive nut, 3/8" captive nut, ½" captive nut, pipe end 10mm (LISO 10), clip 10, clip 11, M11x1, H 3/8" valv, M12x1, 3/8" BSP, 7/16UNS, clip 9, 9/16-24 UNEF captive nut,1/2-14 NPSM captive nut. TAQ PEX Hose bore = DN8, Braiding = SS. End connections = M10X1, M12x1, M15x1, 3/8" captive nut, ½" captive nut, M15X1 captive nut, 3/8" BSP, ½" BSP, compression fitting 10mm, compression fitting 12mm, compression fitting 15mm, pipe end 10mm (LISO10), pipe end 15mm, 3/8'' Elbow, ½'' elbow, clip 10, clip 11, M8X1, 1/8-27 NPSM, M11x1, F ¾'' , 7/16-24 UNS. TAQ PEX ACB Hose bore=DN8, Braiding = ACB. End connections = M10X1, M12x1, M15x1, 3/8" captive nut, ½" captive nut, M15X1 captive nut, 3/8" BSP, ½" BSP, compression fitting 10mm, compression fitting 12mm, compression fitting 15mm, pipe end 10mm (LISO10), pipe end 15mm, 3/8'' elbow, ½'' elbow, clip 10, clip 11, M8X1, 1/8-27 NPSM, M11x1, F ¾'', 7/16-24 UNS. Models added March 2022: TAQ PEX DN6 Hose bore = DN6, Braiding = SS. End connections = ½” BSP (M), M8x1.25, CLIP 8, pipe end 9.6mm (LISO 9.6), pipe end 8mm (LISO 8). TAQ PEX DN6 ACB Hose bore = DN6, Braiding = ACB. End connections = ½” BSP (M), M8x1.25, CLIP 8, pipe end 9.6mm (LISO 9.6), pipe end 8mm (LISO 8). TAQ PEX Hose bore = DN8, Braiding = SS. End connections = Elbow nut ¾” captive nut, M16x1, pipe end 8mm (LISO 8). TAQ PEX ACB hose bore = DN8, Braiding = ACB. End connections = Elbow nut ¾” captive nut, M16x1, pipe end 8mm (LISO 8). Models added May 2025: TAQ PEX DN6 ACB Elbow 3/8” captive nut

Approval Holder:
Tucai, S.A.
Company Name
Tucai, S.A.
Address
Llobateras, 10-12. Polígono Industrial Santiga, 08210 Barberà del Vallès (Barcelona)
Country
Spain
Phone
+34 93 718 95 62
General Email
info@tucai.com

View All Listings by this Company
Manufacturer:
Ningbo Tucai Flexible Pipe Co., Ltd. & TUCAI BULGARIA, Spdl. Ltd.
Company Name
Ningbo Tucai Flexible Pipe Co., Ltd. & TUCAI BULGARIA, Spdl. Ltd.
Address
Ningbo Tucai Flexible Pipe Co., Ltd. : No. 1 Beixing Road, Mazhu Town Yuyao, Zheijiang, 31450 (China) TUCAI BULGARIA, Spdl. Ltd.: 7538 Aydemir Village, 39 Chernozem Street, Silistra Region (Bulgarie)
General Email

View All Listings by this Company

Print This Approval


#2012020

Range of stainless steel braided PE-X lined flexible hose assemblies incorporating NBR washers and various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2012020
Size:
See model.
Marking:
Finial Plumbing logo (I>J), date of manufacture (YYYY), WRAS and DN size on ferrule.
Installation Requirements:
R001 R008
Expiry date:
31/12/2025
Model:
DN8 bore: Finial-DN8-01 - Stainless steel braided PEX hose F3/8*M3/8 (DN8) 10~200cm: ⅜” BSP (F) x ⅜” BSP (M). Finial-DN8-02 - Stainless steel braided PEX hose F3/8*M10x1 (DN8) 10~200cm: ⅜” BSP (F) x M10. Finial-DN8-03 - Stainless steel braided PEX hose F1/2*M1/2 (DN8) 10~200cm: ½” BSP (F) x ½” BSP (M). Finial-DN8-04 - Stainless steel braided PEX hose F1/2*M10x1 (DN8) 10~200cm: ½” BSP (F) x M10. Finial-DN8-05 - Stainless steel braided PEX hose F1/2*F1/2 (DN8) 10~200cm: ½” BSP (F) x ½” BSP (F). Finial-DN8-06 - Stainless steel braided PEX hose F1/2*M12x1 (DN8) 10~200cm: ½” BSP (F) x M12. Finial-DN8-07 - Stainless steel braided PEX hose F1/2*M15x1 (DN8) 10~200cm: ½” BSP (F) x M15. Finial-DN8-08 - Stainless steel braided PEX hose F3/8*F1/2 (DN8) 10~200cm: ⅜” BSP (F) x ½” BSP (F). Finial-DN8-09 - Stainless steel braided PEX hose 15mm compression*M10x1 (DN8) 10~200cm: 15mm compression x M10. Finial-DN8-10 - Stainless steel braided PEX hose 15mm compression*M12x1 (DN8) 10~200cm: 15mm compression x M12. DN10 bore: Finial-DN10-01 - Stainless steel braided PEX hose F1/2*F1/2 (DN10) 10~200cm: ½” BSP (F) x ½” BSP (F). Finial-DN10-02 - Stainless steel braided PEX hose F1/2*M12x1 (DN10) 10~200cm: ½” BSP (F) x M12. Finial-DN10-03 - Stainless steel braided PEX hose F1/2*M1/2 (DN10) 10~200cm: ½” BSP (F) x ½” BSP (M). Finial-DN10-04 - Stainless steel braided PEX hose F3/4*F3/4 (DN10) 10~200cm: ¾” BSP (F) x ¾” BSP (F). All hoses are available in lengths of 10 to 200cm.

Approval Holder:
Finial Plumbing Co., Ltd.
Company Name
Finial Plumbing Co., Ltd.
Address
No 36-38, Siqian Development Zone, Shuikou Town, Kaiping City
Country
Guangdong Province,
Phone
86-750-2729525
General Email
info@dingjian.tw.cn

View All Listings by this Company
Manufacturer:
Finial Plumbing Co., Ltd.
Company Name
Finial Plumbing Co., Ltd.
Address
No 36-38, Siqian Development Zone, Shuikou Town, Kaiping City
Country
Guangdong Province,
Phone
86-750-2729525
General Email
info@dingjian.tw.cn

View All Listings by this Company

Print This Approval


#2011049

Range of automatic air venting valves with a brass body and a plastic float. Maximum working pressure 10.0 bar. Maximum operating temperature 115°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2011049
Size:
Please refer to model.
Marking:
RBM, maximum temperature and pressure on top of body.
Installation Requirements:
R001 R200
Expiry date:
30/11/2025
Model:
AAV079103800B & AAV079203800B: ⅜” BSP (M). AAV079105000B: ½” BSP (M). AAV07911500B: 15mm compression.
Product Images

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company
Manufacturer:
RBM S.p.a.
Company Name
RBM S.p.a.
Address
Componenti Per Impianti Idrotermici Via S. Giuseppe, 1 25075 Nave (Brescia)
Country
Italy
General Email

View All Listings by this Company

Print This Approval


#2012701

Range of concealed flow controls (brass body with various different finishes) incorporating two, quarter turn ceramic disc headworks with single lever operating members controlling the flow to an external outlet (not supplied). Model BK2 is a flow control with adjustable bracket and collection box. Model BK2A is a flow control with bracket. Model BK2B is a flow control. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2012701
Note:
Outlet hose must be installed where light is excluded. Water collection box discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:
Stainless steel braided PE-X lined flexible hose assemblies with ½” captive nut
Marking:
Vola on operating member
Installation Requirements:
R001 R007 R009 R010 R040
Expiry date:
31/12/2025
Model:
VOLA BK2, BK2A & BK2B (brass or stainless steel operating members): The surface finish is indicated by a suffix to the product name and denotes: 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold, 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold.

Approval Holder:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company
Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

Print This Approval


#2011027

Range of manually operated, wall mounted, concealed blending valves (chromium plated brass), incorporating a ceramic cartridge headwork, controlling both flow and temperature, with a single lever operating member. All models incorporate integrated shower connections and hoses. Model 36111970 is supplied with a mounting bracket. The inlets of all models incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2011027
Size:
½” BSP (F)
Marking:
Dornbracht on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2025
Model:
3505097090 concealed wall mounting part, for use with mixers: 36050970, 36002970, 36110970, 36013660 & 36013970. 3505097090 concealed wall mounting part, for use with mixer 36111970.
Product Images

Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2011011

Wall mounted, exposed manual blending valve with brass body (various finishes) incorporating a ceramic cartridge headwork, which controls both temperature and flow and has a single lever operating member. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2011011
Size:
¾” to ½” Offset Unions.
Marking:
Hansgrohe on body.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2025
Model:
15 672 xxx Hansgrohe PuraVida Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2104700

Range of wall mounted manually operated, concealed blending valves (brass body) incorporating ceramic cartridge headworks with single lever operating members and a manual diverter to shower outlets with single lever operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2104700
Size:
½” BSP (F)
Marking:
VOLA on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2025
Model:
VOLA 2400V VOLA 2400FV VOLA 2400NV VOLA 2400RV VOLA 2400TV

Approval Holder:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company
Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

Print This Approval


#2107801

Wall mounted (vertical) thermostatic blending valve (chromium plated brass) incorporating a non-rising spindle headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. The inlets incorporate stainless steel strainers and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2107801
Note:
This approval does not include a shower hose and handset.
Size:
½” BSP (M) x ½” BSP (M)
Marking:
Deva on Body. DTC32 (brand of Methven) on rear of body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2026
Model:
VVERT01

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2011009

Thermostatic blending valve with brass body (various finishes), incorporating two push cartridges to control the water to the 2 outlets independently. The temperature is controlled also controlled independently via a thermostatic cartridge with a dome operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2011009
Size:
¾” BSP (F)
Marking:
Hansgrohe on face plate.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2025
Model:
15 765 xxx Hansgrohe ShowerSelect Thermostat Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2011026

Range of concealed thermostatic shower blending valves (brass) incorporating quarter turn ceramic disc headworks controlling the flow with single lever/cross/dome operating members. Model 3551197090 has one headwork controlling the flow to a single outlet. Models 355249790 & 3552197090 have two headworks independently controlling the flow to two outlets. Model 3553497090 has three headworks independently controlling the flow to three outlets. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2011026
Size:
½” BSP (F) Inlets
Marking:
Dornbracht on operating member or faceplate.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2025
Model:
Valves: 3553497090, 3553197090, 3552197090, 3552497090 & 3551197090. 3550397090 Concealed thermostat module without volume control Trim sets: 36501710, 36501780, 36501977, 36501979, 36501985, 36503710 36503780, 36503977, 36503979 & 36503985. Wall valves: 36607361, 36607371, 36607705, 36607710, 36607715, 36607740 36607782, 36607809, 36607892, 36617705, 36627705, 36607819 36607882, 36607980 & 36607985. Trim sets added August 2022 36501892, 36503892. Trim sets added May 2023: 36501809, 36503809. Wall valve - exposed parts added May 2023: 36604782, 36605782.
Product Images

Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2011039

T-type thermostatic mixing valve with brass body, EPDM ‘O’-rings and stainless-steel strainers. The inlets incorporate stainless-steel strainers and an approved check valve cartridge verified by test (as suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2011039
Size:
22mm compression
Marking:
Inta, model and other technical info on operating member.
Installation Requirements:
R001 R040
Expiry date:
30/11/2025
Model:
60007CP
Product Images

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#2011900

Range of thermostatic mixing valves incorporating brass bodies (chrome plated). The flow is controlled by quarter turn ceramic disc headwork, with dome or cube type operating members, which also diverts the flow between multiple shower outlets. The temperature is controlled by a thermostatic cartridge with dome or cube type operating members. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. The products are supplied with a shower hose, shower handset and overhead shower outlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2011900
Size:
15mm compression
Marking:
TP (Travis Perkins logo) on rear of body.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2025
Model:
555971 Yewdale & 555972 Langden
Product Images

Approval Holder:
Travis Perkins PLC
Company Name
Travis Perkins PLC
Address
Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#2011300

Range of two way and three way concealed thermostatic shower valves, incorporating brass bodies and ceramic disc headwork with dome type operating members which controls the flow and diverts to various shower outlets. Temperature is controlled by a thermostatic cartridge incorporating a manual over ride button. Inlets incorporate stainless steel filters and an approved single check valve cartridge (however the complete assembly has not been tested to demonstrate it provides adequate backflow protection). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2011300
Note:
54169 – built in part is not approved in its own right. Shower hose and handset are not supplied as part of the approval.
Size:
½” BSP (F).
Marking:
Gessi on operating member.
Installation Requirements:
R001 R020
Expiry date:
30/11/2025
Model:
54169 + 54234 2 way shower mixer and 2 way diverter. 54169 + 54236 3 way shower mixer and 3 way diverter.

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#2011325

Range of concealed thermostatic mixing valves, incorporating quarter turn ceramic disc headworks, with dome type operating members, controlling the flow to multiple shower outlets. The temperature is controlled independently via a thermostatic cartridge with dome type operating member. The inlets incorporates stainless steel strainers an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2011325
Size:
½” BSP (M)
Marking:
Gessi on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2025
Model:
The model comprises of a built-in part and external part: 09269+58132 09269+58134 09269+58136 09269+58232 09269+58234 09269+58236 43103+58204 43103+58214 43103+58224 43103+58344 43105+58206 43105+58216 43105+58226 43105+58346 43107+58208 43107+58218 43107+58228 43107+58348 43109+58210 43109+58220 43109+58230 43109+58350 43281+58254 43283+58263 43283+58363
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#2011342

Range of wall mounted, bar type thermostatic shower valves (chromium plated brass), incorporating a ceramic disc headwork which controls and diverts the flow between two outlets (shower to shower) and off position with a cube type operating member (model C76086-05 ) or dome type operating member (model C26037-03). The temperature is controlled independently via a thermostatic cartridge with a cube type operating member incorporating a manual override button (model C76086-05 ) or dome type operating member incorporating a manual override button (model C26037-03). Both inlets incorporate stainless steel filters and a single check valve cartridge however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. The valves are supplied with a shower hose, shower handset and fixed overhead shower rose. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2011342
Size:
¾” BSP (M) x ½” BSP (M) offset reducer.
Marking:
Rainparty on body.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2025
Model:
C76086-05 C26037-03
Product Images

Approval Holder:
Kaiping Rainparty Sanitary Ware Technology Co., Ltd.
Company Name
Kaiping Rainparty Sanitary Ware Technology Co., Ltd.

View All Listings by this Company
Manufacturer:
Kaiping Rainparty Sanitary Ware Technology Co., Ltd.
Company Name
Kaiping Rainparty Sanitary Ware Technology Co., Ltd.

View All Listings by this Company

Print This Approval


#2108800

Wall mounted, bar type thermostatic shower mixers (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with single lever operating members. The temperature is controlled independently via a thermostatic cartridge with single lever operating members. Both inlets incorporate a stainless steel strainer and a single check valve cartridge, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2108800
Size:
¾” BSP (M) reducer x 15mm compression.
Marking:
Methven on body. DTC14 (brand of methven) on rear of body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/08/2026
Model:
SOLBEF – SOL bar shower

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2011332

Range of thermostatic mixing valves with between 1 and 6 outlets. Flow is controlled by a solenoid valve and temperature is thermostatically controlled. Models Mira Activate 1.1903.091, 1.1903.092 & 1.1903.093 incoporate a built-in pump which is set 12 litres per minute. The valves can be supplied with a shower rail, hose, handshower and/or ceiling mounted shower outlet. The inlets of the valves incorporate an isolation valve, stainless steel strainer and a single check valve cartridge however, the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Valves with ‘HP’ in model have a maximum working pressure of 5.0 bar. All other valves have a maximum working pressure of 1.0 bar. Maximum operating temperature 50°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2011332
Size:
15mm push fit connection
Marking:
Mira Showers & other technical information on body.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2025
Model:
Valve only: Kohler UK 2 outlet HP valve (28209W-NA) Kohler UK 3 outlet HP valve (28210W-NA) Kohler UK 4 outlet HP valve (28211W-NA) Kohler UK 6 outlet HP valve (28212W-NA) Valve supplied with shower outlets: Mira Activate single outlet HP ceiling fed (1.1903.086) Mira Activate single outlet HP rear fed (1.1903.087) Mira Activate dual outlet HP ceiling fed (1.1903.088) Mira Activate dual outlet HP rear fed (1.1903.089) Mira Activate dual outlet HP rear fed (1.1903.090) Mira Activate single outlet pumped rear fed (1.1903.091) Mira Activate dual outlet pumped ceiling fed (1.1903.092) Mira Activate dual outlet pumped rear fed (1.1903.093)
Product Images

Approval Holder:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

Print This Approval


#2011337

Range of lugged butterfly valves with blue, black or red epoxy coated ductile iron bodies and nickel plated ductile iron discs and an EPDM sealing ring. D71XLK models are lever operated, the D371XLK are handwheel operated. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
2011337
Size:
DN40-300
Marking:
Jinan Meide Casting Co., Ltd logo, PN, DN and serial number on data plate on body.
Installation Requirements:
R001
Expiry date:
30/11/2025
Model:
D71XLK and D371XLK
Product Images

Approval Holder:
Jinan Meide Casting Co., Ltd
Company Name
Jinan Meide Casting Co., Ltd
Address
Meide Science and Technology Park, Pingyin Industrial Park, Jinan Shandong Province
Country
China
Phone
86-531-87856308

View All Listings by this Company
Manufacturer:
Jinan Meide Casting Co., Ltd
Company Name
Jinan Meide Casting Co., Ltd
Address
Meide Science and Technology Park, Pingyin Industrial Park, Jinan Shandong Province
Country
China
Phone
86-531-87856308

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 6 of 577

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.