Range of three-hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes). Incorporating a ceramic cartridge headwork with a single lever operating member and self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts Maximum working pressure 10.0 Bar. Maximum operating temperature 60 °C

Section:

0655 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

241002045

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The products are supplied with a shower hose and handset Product 71 730 xx0 to be installed in combination with 13437180 Basic set for 3-hole rim mounted single lever bath mixer (WRAS 2303055). Product 71 731 xx0 to be installed in combination with 13439180 Basic set for 3-hole rim mounted single lever bath mixer (WRAS 2311033).

Size:

½” BSP (M)

Marking:

Hansgrohe on spout and operating member

Installation Requirements:

R001 R006 R007 R030

Expiry date:

31/10/2029

Model:

71 730 xxx Hansgrohe Talis E 3-hole rim mounted bath mixer 71 731 xxx Hansgrohe Talis E 3-hole rim mounted bath mixer Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of single hole, double outlet (swivel) combination tap assemblies (various finishes) with electronically controlled functions to allow the tap to dispense boiling water, chilled water or sparkling water from under counter units (not supplied or part of this approval) and a ceramic cartridge headwork with single lever operating member controlling the flow of normal mixed water. The spout outlet incorporates a plastic aerator. Maximum working pressure: 5.0 Bar. Maximum operating temperature: 98.0°C.

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

241002033

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined hose assemblies with 1/2" BSP captive nut end connections (Normal Hot/Cold Water) and a Silicone flexible tube (Boiling, Chilled or Sparkling).

Marking:

Zip on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/10/2029

Model:

96363UK HydroTap Celsius Arc (Bright Chrome), 96394UK HydroTap Celsius Arc (Brushed Chrome), 96406UK HydroTap Celsius Arc (Matt Black).

Product Images

Approval Holder:

Zip Heaters UK Ltd T/A Zip Water UK

Company Name

Zip Heaters UK Ltd T/A Zip Water UK

Address

Trafalgar House, Trafalgar Business Park, Dereham

Postcode

NR19 1JG

Country

United Kingdom

Phone

0345 600 5005

General Email

sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Range of combined bath filler and/or waste and overflow assemblies (see models) in various finishes. Maximum operating temperature: 60ºC

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

241002055

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

Stainless steel braided, EPDM lined, flexible hose assembly with a ½” BSP (F) captive nut (Filling Hose) and 1½” BSP (M) (Pop Up Waste)

Marking:

WRAS approved, CGS logo and product code on face plate

Installation Requirements:

R001 R576

Expiry date:

31/10/2029

Model:

SK134YY.XX (filler, waste and overflow), SK132YY.XX (filler, waste and overflow), SK122YY.XX (filler, waste and overflow), SK14YY.XX (waste and overflow). Model added February 2025: SK157YY.XX (filler, waste and overflow). Where YY denotes the overflow hose length and can be replaced with the following. Blank = max. 80cm, -1 = max. 125cm. Where XX denotes the finish, and can be replaced with any of the following: 01 = Standard Chrome, 05 = PVD Chrome, 06 = Black Chrome, 12 = Gold, 15 = Rose Gold, 17 = PVD Gold, 25 = Brushed Bronze, 26 = Brushed Copper, 33 = White Matt, 35 = White, 43 = Black Matt, 45 = Black, 40 = Brushed Nickel.

Product Images

Approval Holder:

C.G.S. S.R.L.

Company Name

C.G.S. S.R.L.

Address

Via Torino 9/A Cureggio (NO)

Postcode

28060

Country

Italy

General Email

f.cerutti@cgsmixer.com

View All Listings by this Company

Range of wall mounted spout outlets (brass bodies - various finishes) incorporating a plastic aerator at the outlet. Open outlet use only. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

240904017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Villeroy & Boch logo on body

Installation Requirements:

R001 R040

Expiry date:

30/09/2029

Model:

TVT107002000XX Liberty TVT122002000XX Empora XX= Finishing 61= Chrome 64=Brushed Nickel 76=Brushed gold K5= Matt black

Product Images

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Range of wall mounted bath spout outlets with brass bodies (various finishes) with a plastic aerator incorporated into the outlet. Maximum working pressure: 5 bar. Maximum operating temperature 60°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

241002068

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model below

Marking:

Volevatch on Escutcheon

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

B/D6-B9-00 Wall-mounted small straight tub spout from Bistrot collection ¾" BSP (M). B/D7-B9-00 Wall-mounted long straight tub spout from Bistrot collection ¾" BSP (M). P/Fl-B7-00 Short wall tub filler from Piet collection ¾" BSP (M). P/Fl-B8-00 Long wall tub filler from Piet collection ¾" BSP (M). B/D2-L2-00 Wall-mounted straight spout from Bistrot collection ½" BSP (M). P/D8-L4-00 Wall-mounted straight spout from Piet collection ½" BSP (M). B identifies model as Bistrot collection & P as Piet collection.

Manufacturer:

VOLEVATCH

Company Name

VOLEVATCH

Address

1 BIS PLACE JEAN JAURES 80130 TULLY

Country

FRANCE

View All Listings by this Company

Range of free standing sanitary macerating disposal units. The flow is controlled by solenoid valve and discharges via type a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 10.0 bar. Cold water use only.

Section:

0950 Disposal Units

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) Model or ¾” BSP (F) to ½” BSP (M) Reducer.

Marking:

Model, 'The Haigh Engineering Company Ltd', Serial number, manufacturer's address and product info on label.

Installation Requirements:

R001 R574

Expiry date:

30/09/2029

Model:

Quattro Health Care Bedpan Macerator (111565-03). Quattro XL Health Care Bedpan Macerator (111565-03). Panaway DS Health Care Bedpan Macerator (111565-04). Panaway F Health Care Bedpan Macerator (111565-04). Incomaster Incontinence & Sanitary Pad Macerator (116110-01). Incomaster XL Incontinence & Sanitary Pad Macerator (116110-01).

Product Images

Approval Holder:

The Haigh Engineering Company Limited

Company Name

The Haigh Engineering Company Limited

Address

Alton Road Ross-on-Wye Herefordshire

Country

HR9 5NG

General Email

STHURLOW@HAIGH.CO.UK

View All Listings by this Company

Manufacturer:

The Haigh Engineering Company Limited

Company Name

The Haigh Engineering Company Limited

Address

Alton Road Ross-on-Wye Herefordshire

Country

HR9 5NG

General Email

STHURLOW@HAIGH.CO.UK

View All Listings by this Company

Range of chemical dosing equipment which incorporate self-closing valves within a plastic body. The outlet of the injector incorporates a connection for injection of chemicals via venturi action. Maximum working pressure 6.0 bar. Maximum operating temperature 60ºC.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

240904725

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Only suitable for use with chemicals that are no greater than a Fluid Category 3 risk.

Size:

¾” BSP (M) ¾” BSP (F)

Marking:

SEKO, model and technical information on adhesive label on case.

Installation Requirements:

R001 R040 R160 R415

Expiry date:

30/09/2029

Model:

QX1B100F PROFLEX 1LF BUT QX1S100F PROFLEX 1LF SLID QX1B300F PROFLEX 1HF BUT QX1S300F PROFLEX 1HF SLID QX2B1B3F PROFLEX 2LF+2HF BUT QX2S1S3F PROFLEX 2LF+2HF SLID QX3B1B3F PROFLEX 3LF+1HF BUT QX3S1S3F PROFLEX 3LF+1HF SLID QX3B3B1F PROFLEX 3HF+1LF BUT QX3S3S1F PROFLEX 3HF+1LF SLID QX4B100F PROFLEX 4LF BUT QX4S100F PROFLEX 4LF SLID QX4B300F PROFLEX 4HF BUT QX4S300F PROFLEX 4HF SLID LX1B100F LDS 1LF BUT LX1S100F LDS 1LF SLID LX1B1S0F LDS 1LF BUT/SLID LX1B300F LDS 1HF BUT LX1S300F LDS 1HF SLID LX1B3S0F LDS 1HF BUT/SLID LX2B1B3F LDS 2LF + 2HF BUT LX2S1S3F LDS 2LF + 2HF SLID LX2S1B3F LDS 2LF + 2HF SLID/BUT LX3B1B3F LDS 3LF + 1HF BUT LX3S1S3F LDS 3LF + 1HF SLID LX3S1B3F LDS 3LF + 1HF SLID/BUT LX3B3B1F LDS 3HF + 1LF BUT LX3S3S1F LDS 3HF + 1LF SLID LX3B3S1F LDS 3HF + 1LF BUT/SLID LX4B100F LDS 4LF BUT LX4S100F LDS 4LF SLID LX4B1S0F LDS 4LF BUT/SLID LX4B300F LDS 4HF BUT LX4S300F LDS 4HF SLID LX4B3S0F LDS 4HF BUT/SLID GX1B100F LS 1LF BUT GX1S100F LS 1LF SLID GX1B1S0F LS 1LF BUT/SLID GX1B300F LS 1HF BUT GX1S300F LS 1HF SLID GX1B3S0F LS 1HF BUT/SLID GX2B1B3F LS 2LF + 2HF BUT GX2S1S3F LS 2LF + 2HF SLID GX2S1B3F LS 2LF + 2HF SLID/BUT GX3B1B3F LS 3LF + 1HF BUT GX3S1S3F LS 3LF + 1HF SLID GX3S1B3F LS 3LF + 1HF SLID/BUT GX3B3B1F LS 3HF + 1LF BUT GX3S3S1F LS 3HF + 1LF SLID GX3B3S1F LS 3HF + 1LF BUT/SLID GX4B100F LS 4LF BUT GX4S100F LS 4LF SLID GX4B1S0F LS 4LF BUT/SLID GX4B300F LS 4HF BUT GX4S300F LS 4HF SLID GX4B3S0F LS 4HF BUT/SLID

Product Images

Approval Holder:

SEKO SpA

Company Name

SEKO SpA

Address

Via Salaria KM 92, 200 02010 S.Sufina (RI) Italy

View All Listings by this Company

Mini shock arrestor with a stainless steel body. Maximum working pressure 15.0 bar . Maximum operating temperature 70°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Flomasta and technical information on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Maximum working pressure 15.0 bar, 0.16 litre capacity: VAH0368 - 5059340418568 – Flomasta ½”MBSP Mini Shock Arrestor

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Range of expansion vessels with white epoxy coated steel bodies and butyl diaphragm. Please refer to model for maximum working pressures. Maximum operating temperature 70°C. Maximum working pressure 10.0 bar (all except two models), 8.0 bar (24749 & 24809 only).

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

Airfix, Flamco, pressure/temperature, date and time of manufacture (time = hour/min/sec) (date = DD/MM/YY), CE Marking & technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

24259 - Airfix A 8 litre - Drinkwater exp. Vessel 8 litre with pre charge 4 bar, 24348 / 24349 - Airfix A 12 litre - Drinkwater exp. Vessel 12 litre with pre charge 3 / 4 bar, 24458 / 24460 / 24459Airfix A 18 litre - Drinkwater exp. Vessel 18 litre with pre charge 3 / 3.5 / 4 bar, 24558 / 24559Airfix A 25 litre - Drinkwater exp. Vessel 25 litre with pre charge 3 / 4 bar, 24659 - Airfix A 35 litre - Drinkwater exp. Vessel 35 litre with pre charge 4 bar, 24749 - Airfix A 50 litre - Drinkwater exp. Vessel 50 litre with pre charge 4 bar, 24809 - Airfix A 80 litre - Drinkwater exp. Vessel 80 litre with pre charge 4 bar.

Product Images

Approval Holder:

Flamco Limited

Company Name

Flamco Limited

Address

Washway Lane, St. Helens

Postcode

WA10 6PB

Phone

+44 (0) 1744 744 744

General Email

info@flamco.co.uk

View All Listings by this Company

Range of filter cartridges. Maximum working pressure 8.0 Bar. Cold water use only.

Section:

1055 Filter Cartridges

Size:

¾” BSP (M)

Marking:

Franke and product info on body

Installation Requirements:

R001 R008 R120 R170

Expiry date:

28/02/2029

Model:

Franke Coffeewater A30 Franke Coffeewater A40 Franke Coffeewater A50 Franke Coffeewater A60 Franke Coffeewater A80 Franke Coffeewater Protect B60 Franke Coffeewater Protect B80 Franke Coffeewater Premium C60

Approval Holder:

Franke Holding AG

Company Name

Franke Holding AG

Address

Franke-Strasse 2 PO Box 230 4663 Aarburg

Country

Switzerland

View All Listings by this Company