'Reno 100'. Black coloured (with blue external stripes), extruded polyethylene pipe. For use with water up to 23°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

251155034

Expiry date:

30/11/2030

Approval Holder:

Idrotherm 2000 SpA

Company Name

Idrotherm 2000 SpA

Address

Via Pio La Torre, 21 55032 Castelnuovo di Garfagnana (LU)

Country

Italy

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlets incorporate plastic aerators. Maximum working pressure:8.0 Bar Maximum operating temperature:65 °C

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

250902031

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided, PEX lined hose incorporating 3/8" BSP (F) captive nut end connection

Marking:

Stern on top of tap body

Installation Requirements:

R001 R006 R009

Expiry date:

30/09/2030

Model:

212000 – Boreal B 212005 – Boreal E 212010 – Boreal Plus B 212015 – Boreal Plus E

Approval Holder:

Y. Stern Engineering (1989) Ltd

Company Name

Y. Stern Engineering (1989) Ltd

Address

15 Gan Rave Blvd. Yavne

Postcode

8122217

Country

Israel

Phone

+972 8 9326007

General Email

leah@sternfaucets.com

View All Listings by this Company

Section:

0531 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)

Wall Mounted Undefinable Air Gap - See IRN's

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2030

Notes & Further Information

Where xx denotes the surface finish (which is a non-water contact part) 61 = Chrome, 74 = Brushed Chrome, 64 = Brushed Nickel Matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, K5 = Matt black, 70 = Dune, 63 = Graphite

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Section:

0695 Combination Tap Assemblies

Description:

A Range of Spout outlet(s).

Wall mounted. Kit also includes operating lever and finishing fittings. Products must be used in conjunction with concealed core valve unit ‘A1313NU Kit 1’ (not included as part of this approval).

Installation Requirements:

R001 R010 R040

Expiry date:

30/11/2030

Notes & Further Information

XX at the end indicates the Finish of surfaces that are not in contact with water (61 - Chrome, K5 - Matt black, 76 - Brushed gold, 64 - Brushed nickel).

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Range of shower kits with a shower hose, handset and shower rail. Open outlet use only Maximum operating temperature 60.0°C

Section:

1670 Shower Outlets

Section Subtitle:

Shower kit(s)

WRAS Approval Number:

251102030

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP Captive nut.

Marking:

Villeroy & Boch on handset & shelf.

Installation Requirements:

R001 R040

Expiry date:

30/11/2030

Model:

TVS110002000XX TVS110003000XX Where XX denotes the finish and can be replaced with either: 61 = Chrome K5 = Black

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Section:

2004 Shower Valves

Description:

A Range of Shower valve(s) with manual temperature control, incorporating a self-cancelling diverter with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3).

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R030 R010

Expiry date:

30/11/2030

Notes & Further Information

TVS00035100000 – Vi-Box is used in conjunction with all of the models. Where xx denotes the surface finish (which is a non-water contact part) 61 = Chrome, 74 = Brushed Chrome, 64 = Brushed Nickel Matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, K5 = Matt black, 70 = Dune, 63 = Graphite

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body (chromium plated), incorporating an isolation valve. Compression connections to be used with copper pipe EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

0034 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.

WRAS Approval Number:

250604710

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

JustLink, WRAS, Year of production(YYYY) etched on body; Size, Flow arrow, CR casted on body

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

ZHF-15-1 Number: M7600120012001 15mm compression x ½”BSP(M) ZHF-15-3 Number: M7600120012018 15mm compression x ½”BSP(M) ZHF-10-1 Number: M7600380012002 M3/8*15mm 15mm compression x 3/8” BSP (M) Model added December 2025: ZHF-15-2 M7600120012003 M1/2*M1/2 BSP (M).

Approval Holder:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

Section:

0442 Thermostatic cartridges

Description:

A Range of Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/12/2030

Notes & Further Information

The cartridges 99078-H and 99014-H are re-approvals of certificate 2007006 (Expiry date: 31/07/2025) The cartridges G22151-N, 99150-H, 99095-H, 99090-H are on the same family and we would like to add to the same certificate.

Approval Holder:

Aerre Plast Srl

Company Name

Aerre Plast Srl

Address

Via Novara, 8 Casale Corte Cerro (VB)

Postcode

28881

Country

Italy

Phone

+39 0323 865360

General Email

info@aerreplast.it

View All Listings by this Company

Manufacturers:

Aerre Plast Srl

Section:

0445 Combination Tap Assemblies

Description:

A Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

Deck Mounted Stainless steel braided PEX lined inlet hoses Undefinable Air Gap - See IRN's

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R009 R010 R090

Expiry date:

31/12/2030

Approval Holder:

MVI Hazel Ltd.

Company Name

MVI Hazel Ltd.

Address

1 Mygan Business Park, Jamestown Road, Finglas, Dublin 11

View All Listings by this Company

Section:

0445 Combination Tap Assemblies

Description:

A Range of Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

Deck Mounted Undefinable Air Gap - See IRN's Stainless-steel braided PEX lined inlet hoses Stainless-steel braided PEX lined connection hoses Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R007 R009 R090

Expiry date:

31/01/2031

Notes & Further Information

1. The first * denotes different handles and can be replaced with A, B, C and D. 2. The second ** represents different types of finishes as follows. C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: white CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:

Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name

Guangzhou KIND Architecture Material Technology Co., Ltd.

Address

Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province

Postcode

510700

Country

China

Phone

+86-20-23371404

General Email

sale@watersino.com

View All Listings by this Company

Section:

0490 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a double outlet and a swivel spout.

Deck Mounted. Stainless steel braided, EPDM lined, inlet hoses. Capable of achieving AUK3 Tap Gap.

Installation Requirements:

R001 R006

Expiry date:

31/12/2030

Approval Holder:

MVI Hazel Ltd.

Company Name

MVI Hazel Ltd.

Address

1 Mygan Business Park, Jamestown Road, Finglas, Dublin 11

View All Listings by this Company

Range of wall mounted two-hole, single outlet fixed combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with single lever type operating members. The spout outlets incorporate plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60⁰C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

260308006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

VADO on faceplate.

Installation Requirements:

R001 R010 R040

Expiry date:

31/03/2031

Model:

EDI-109S/A-C/P, IND-EDI109S/A-XXX, LIF-109S/A-200-C/P, LIF-109S/A, -C/P NOT-109FS/A-C/P, IND-NOT109FS/A-XXX, PHA-109FS/A-C/P, PHO-109FSA-C/P ORI-209S/A-C/P, ORI-209S/A-CPK, IND-ORI209SA-XXX, SAF-109S-XXX SAF-109S-SQ-XXX. IND – colour variant, 200 – 200mm spout length, F – Flow regulated, CPK – Knurled Handle, Suffixes that replace XXX to denote colour finish – SAF Only – MB-Matt black, PEW – pewter, SBR – satin brass, CP or C/P – Chrome. IND only – BLK-Brushed black, BRG-Brushed gold, BRN-Brushed Nickel, BRZ-Brushed bronze, BG-Bright gold, BRC-Brushed chrome. BGM-Brushed gun metal.

Approval Holder:

VADO

Company Name

VADO

Address

Cheddar Business Park Wedmore Road Cheddar Somerset

Postcode

BS27 3EB

Country

United Kingdom

Phone

01934 745895

General Email

tom.ross@vado.com

View All Listings by this Company

Two-hole, single outlet (swivel) combination tap assembly (chromium plated brass body), incorporating rising spindle headworks with single lever operating members. The spout outlet incorporates a built in anti-splash device and the product is supplied with metal backnuts. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

260302012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2" BSP (M)

Marking:

Armitage Shanks on indice.

Installation Requirements:

R001 R006 R010

Expiry date:

31/03/2031

Model:

S8200AA

Approval Holder:

Armitage Shanks

Company Name

Armitage Shanks

Address

Old Road (Lodge 1), Armitage, Rugeley

Postcode

WS15 4BT

Country

Staffordshire,

Phone

+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Expansion vessels incorporating a stainless-steel body and SEFA membrane. Maximum working pressure: 10 bar, except A2C2R27 WR000 (DP 24/16X) 1” BSPP (M) which is 16 bar. Maximum operating temperature 85˚C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

ELBI, Model name, Serial, Production number, Nominal capacity, Max pressure and other technical information on lable on body.

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

A2C2L11 WR000 (DP-5X) ¾” BSPP (M), A2C2L16 WR000 (DP-8X) ¾” BSPP (M), A2C2L19 WR000 (DP11X) ¾” BSPP (M), A2C2L24 WR000 (DP-18X) ¾” BSPP (M), A2C2L27 WR000 (DP-24X) 1” BSPP (M), A2C2L31 WR000 (DP-35X) 1” BSPP (M). A2C2L34 WR000 (DP-50X) 1” BSPP (M), A2C2L35 WR000 (DPV-60X) 1” BSPP (M), A2C2L37 WR000 (DPV-80X) 1” BSPP (M), A2C2L38 WR000 (DPV-100X) 1 ¼”” BSPP (M), A2C2L43 WR000 (DPV-150X) 1 ¼”” BSPP (M), A2C2L47 WR000 (DPV-200X) 1 ¼”” BSPP (M), A2C2L51 WR000 (DPV-300X) 1 ¼”” BSPP (M), A2C2L55 WR000 (DPV-500X) 1” BSPP (M). A2E2L25 WR000 (DPH-20X) 1” BSPP (M), A2E2L27 WR000 (DPH 24X) 1” BSPP (M), A2E2L35 WR000 (DPH 60X) 1” BSPP (M), A2F2L25 WR000 (DPH-20X G3/4”) 3/4” BSPP (M), A2F2L27 WR000 (DPH-24X G3/4”) 3/4” BSPP (M). A2C2R27 WR000 (DP 24/16X) 1” BSPP (M).

Approval Holder:

Elbi SPA

Company Name

Elbi SPA

Address

Via Buccia 9 35010 Limena PD Italy

View All Listings by this Company

Range of expansion vessels with epoxy coated bodies. Maximum working pressure of 8.6 bar. Cold water use only.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP – 1¼” BSP.

Marking:

Stuart Turner & logo, model and technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

STUART TURNER STORMBOOST 200 STUART TURNER STORMBOOST 300

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

'Instantor’ range of stainless-steel crimp fittings incorporating EPDM and ‘O’-rings for use with 'Instantor’ stainless steel pipe. Connection is achieved via M profile press jaws. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251202007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15, 18, 22, 28, 35, 42, 54, 76, 88, 108, 114, 139 and 168mm crimp. ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2” BSP (M or F – stated via model name). DN50 to DN150 Flanged.

Marking:

Instantor, model and size on fitting body. Instantor, size and product info on pipe.

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

Coupling from 15 to 168.3mm Material 1.4401/1.4404 & 1.4301/1.4307 SP410001 SP410002 SP410003 SP410004 SP410005 SP410006 SP410007 SP410008 SP410009 SP410010 SP410011 Slip Coupling from 15 to 108mm Material 1.4401/1.4404 & 1.4301/1.4307 SP4100S1 SP4100S2 SP4100S3 SP4100S4 SP4100S5 SP4100S6 SP4100S7 SP4100S8 SP4100S9 90Q Female-Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 SP415001 SP415002 SP415003 SP415004 SP415005 SP415006 SP415007 SP415008 SP415009 SP415010 SP415011 90Q Male - Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 SP435001 SP435002 SP435003 SP435004 SP435005 SP435006 SP435007 SP435008 SP435009 SP435010 SP435011 45Q Female-Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 SP445001 SP445002 SP445003 SP445004 SP445005 SP445006 SP445007 SP445008 SP445009 SP445010 SP445011 45Q Female - Male Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 SP425001 SP425002 SP425003 SP425004 SP425005 SP425006 SP425007 SP425008 SP425009 SP425010 SP425011 Female Angle Adapter from 15 1/2" to 1 1/4" Material 1.4401/1.4404 & 1.4301/1.4307 SP417001 SP417002 SP417003 SP417004 Male Angle Adapter from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP416001 SP416002 SP416003 SP416004 SP416005 SP416006 Female Elbow with Wall nut from 15 1/2" to 22 3/4" Material 1.4401/1.4404 & 1.4301/1.4307 SP421001 SP421002 90Q Elbow with Plane Ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 SPP15001 SPP15002 SPP15003 SPP15004 SPP15005 SPP15006 Valve connector with swivel in stainless Steel from 15 1/2" to 76.121/2" Material 1.4401/1.4404 & 1.4301/1.4307 SPS12001 SPS12002 SPS12003 SPS12004 SPS12005 SPS12006 SPS12007 SPS12008 Female tee threaded adaptor from 15 1/2" to 108 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP430001 SP430221 SP430002 SP430331 SP430332 SP430003 SP430441 SP430442 SP430443 SP430004 SP430551 SP430552 SP430553 SP430005 SP430661 SP430662 SP430663 SP430006 SP430772 SP430776 SP430882 SP430883 SP430886 SP430992 SP430993 SP420996 Reducer from 22-15 to 168.3-139.7 Material 1.4401/1.4404 & 1.4301/1.4307 SP419021 SP419031 SP419032 SP419041 SP419042 SP419043 SP419051 SP419052 SP419053 SP419054 SP419061 SP419062 SP419063 SP419064 SP419065 SP419072 SP419073 SP419074 SP419075 SP419076 SP419082 SP419083 SP419084 SP419085 SP419086 SP419087 SP419092 SP419093 SP419094 SP419095 SP419096 SP419097 SP419098 SP419099 SP419100 SP419101 SP419102 SP419103 SP419104 SP419105 Reducing tee from 22-15 to 168.3-139.7 Material 1.4401/1.4404 & 1.4301/1.4307 SP418221 SP418331 SP418332 SP418441 SP418442 SP418443 SP418551 SP418552 SP418553 SP418554 SP418661 SP418662 SP418663 SP418664 SP418665 SP418772 SP418773 SP418774 SP418775 SP418776 SP418882 SP418883 SP418884 SP418885 SP418886 SP418887 SP418992 SP418993 SP418994 SP418995 SP418996 SP418997 SP418998 SP418999 SP418101 SP418102 SP418103 SP418104 SP418105 SP418106 Equal Tee from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 SP418001 SP418002 SP418003 SP418004 SP418005 SP418006 SP418007 SP418008 SP418009 SP418010 SP418011 Female adaptor from 15 1/ 2" to 88.9 3" Material 1.4401/1.4404 & 1.4301/1.4307 SP412001 SP412012 SP412021 SP412002 SP412023 SP412032 SP412003 SP412034 SP412043 SP412004 SP412045 SP412054 SP412005 SP412065 SP412006 SP412070 SP412087 Male adaptor from 15 1/2" to 108 4" Material 1.4401/1.4404 & 1.4301/1.4307 SP411001 SP411012 SP411021 SP411002 SP411023 SP411032 SP411003 SP411034 SP411043 SP411004 SP411045 SP411054 SP411005 SP411065 SP411006 SP411070 SP411087 SP411099 Flanges adaptor PN16 from 15 DN16 to 108 DN16 Material 1.4401/1.4404 & 1.4301/1.4307 SP440001 SP440002 SP440003 SP440004 SP440005 SP440006 SP440007 SP440008 SP440009 Pre-formed pipe bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 SP400011 SP400012 SP400013 Stop End/Plug from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP451001 SP451002 SP451003 SP451004 SP451005 SP451006 SP451007 SP451007 SP451008 Air tube Pipe Bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 SP422001 SP422002 SP422003 Pipe Bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 SP400014 SP400015 SP400016 3 Pieces adaptor from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 SP424001 SP424002 SP424003 SP424004 SP424005 SP424006 Female -Female pipe bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 SP400017 SP400018 SP400019 Female connector from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP426001 SP426021 SP426002 SP426032 SP426003 SP426004 SP426005 SP426006 Male connector from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP427001 SP427021 SP427002 SP427032 SP427003 SP427004 SP427005 SP427006 Press flanged adaptor from 54 DN50 to 168.3 DN150 Material 1.4401/1.4404 & 1.4301/1.4307 SP428006 SP428007 SP428008 SP428009 SP428010 SP428011 45Q Male angle adaptor from 15 1/ 2" to 28 1" Material 1.4401/1.4404 & 1.4301/1.4307 SP433001 SP433002 SP433003 90Q Female angle adaptor 15 3/ 8" to 35 1 1/ 4" Material 1.4401/1.4404 & 1.4301/1.4307 SP434001 SP434002 SP434003 SP434004 90Q Female angle adaptor with swivel nut from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP480001 SP480002 SP480003 SP480004 SP480005 SP480006 Male Tee threaded adaptor from 15 1/2" to 35 11/4" Material 1.4401/1.4404 & 1.4301/1.4307 SP436001 SP436002 SP436003 SP436004 90Q Male angle adaptor from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP439001 SP439002 SP439003 SP439004 SP439005 SP439006 F41 Male union connector gas from 15 1/ 2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP U11001 SP U11012 SP U11023 SP U11002 SP U11003 SP U11034 SP U11004 SP U11005 SP U11006 Female Union connector gas from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP U12001 SP U12012 SP U12023 SP U12002 SP U12003 SP U12034 SP U12004 SP U12005 SP U12006 Union Gas Female threaded from 15 3/4" to 54 2"Material 1.4401/1.4404 & 1.4301/1.4307 SP481012 SP481002 SP481023 SP481003 SP481034 SP481004 SP481045 SP481005 SP481056 SP481006 Straight union with press fitting on both ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 SP460001 SP460002 SP460003 SP460004 SP460005 SP460006 Half coupling from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP470001 SP470002 SP470003 SP470004 SP470005 SP470006 SP470007 SP470008 SP470009 30Q Female-Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP483001 SP483002 SP483003 SP483004 SP483005 SP483006 SP483007 SP483008 SP483009 30Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 SP490001 SP490002 SP490003 SP490004 SP490005 SP490006 15Q Female-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP450001 SP450002 SP450003 SP450004 SP450005 SP450006 SP450007 SP450008 SP450009 60Q Female-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP482001 SP482002 SP482003 SP482004 SP482005 SP482006 SP482007 SP482008 SP482009 Flanges adaptor PN6 from 15 DN15 to 108 DN100 Material 1.4401/1.4404 & 1.4301/1.4307 SP452001 SP452002 SP452003 SP452004 SP452005 SP452006 SP452007 SP452008 SP452009 Pipe penetration from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP453001 SP453002 SP453003 SP453004 SP453005 SP453006 SP453007 SP453008 SP453009 Male plug from 16 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP454001 SP454002 SP454003 SP454004 SP454005 SP454006 SP454007 SP454008 SP454009 Weld Adaptor from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 SP455001 SP455002 SP455003 SP455004 SP455005 SP455006 60Q Elbow with plain ends from 15 to 54 Material (316L)1.4404 SP458001 SP458002 SP458003 SP458004 SP458005 SP458006 PIPE: ISSP 111 = 15 x 0.6 mm Material (316L) 1.4404 ISSP 112 = 22 x 0.7 mm Material (316L) 1.4404 ISSP 113 = 28 x 0.8 mm Material (316L) 1.4404 ISSP 114 = 35 x 1 mm Material (316L) 1.4404 ISSP 115 = 42 x 1.1mm Material (316L) 1.4404 ISSP 116 = 54 x 1.2 mm Material (316L) 1.4404 ISSP 117 = 76.1 x 1.5 mm Material (316L) 1.4404 ISSP118 = 88.9 x 2 mm Material (316L) 1.4404 ISSP120 139.7 x 2 mm Material (316L) 1.4404 ISSP121 168.3 x 2 mm Material (316L) 1.4404

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Instantor Works Santry Avenue Dublin

Postcode

D09 K160

Country

Ireland

Phone

+353(0)1 842 6255

General Email

Ryan.Charleson@Instantor.ie

View All Listings by this Company

‘EPS’, ‘EPT & ‘EPL’ ranges of PPSU press fittings (TH press profile) with EPDM ‘O’-rings for use with ‘EFIELD EA’ PE-Xb/AL/PE-Xb multilayer pipes. Maximum working pressure: 10 bar. Maximum operating temperature: 95°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251206001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Press connections - 16mm, 20mm, 25mm, 26mm & 32mm. Threaded Connections - ½”, ¾” & 1” BSP.

Marking:

EFIELD, pipe outer diameter X wall thickness, on crimp sleeve. EFIELD; size (outer diameter x wall thickness); date of manufacture and time (YYYYMMDDHHMMSS) & line no on pipe

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

Model: “EA” PE-Xb/AL/PE-Xb multilayer pipes: EA16, EA20, EA25, EA26, EA32. Male straight unions: EPS2002, EPS2003, EPS2007, EPS2008, EPS2009, EPS2013. Female straight unions: EPS3003B, EPS3004B, EPS3005B, EPS3006B, EPS3010B, EPS3001, EPS3002, EPS3004, EPS3005, EPS3006 Female elbow with plate: EPL4001. Female elbow EPL3001, EPL3002, EPL3004. Male elbow EPL2001. Equal elbow EPL0001, EPL0002, EPL0003, EPL0004, EPL0005. Equal straight union EPS0001, EPS0002, EPS0003, EPS0004, EPS0005. Reduced straight union EPS1001, EPS1003, EPS1005 Equal tee EPT0001, EPT0002, EPT0003, EPT0004, EPT0005. Reduced tee EPT1002, EPT1003, EPT1004, EPT1009, EPT1016, EPT1011, EPT1020, EPT1012, EPT1021.

Approval Holder:

Shandong EFIELD Piping System Co., Ltd.

Company Name

Shandong EFIELD Piping System Co., Ltd.

Address

No.2369 Yikang Road South Section, Economic Development Zone, Tengzhou City, Zaozhuang City, Shandong

Country

China

Phone

+86-632-5990659

General Email

William.wang@efieldgroup.com

View All Listings by this Company

Range of press fittings (brass bodies) with stainless steel press (‘TH’ profile) collars and EPDM o-rings for use with ‘EA’ PE-Xb/AL/PE-Xb’ multilayer pipe (for press fitting connections) or copper pipe manufactured to EN1057 (compression connections). Maximum working pressure: 10 bar. Maximum operating temperature: 95 °C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251206002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

16mm, 20mm, 25mm, 26mm & 32mm.

Marking:

Fittings: EFIELD, pipe outer diameter X wall thickness, on crimp sleeve. Pipe: EFIELD; size (outer diameter x wall thickness); date of manufacture and time (YYYYMMDDHHMMSS) & line no.

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

“EA” PE-Xb/AL/PE-Xb multilayer pipes: EA16, EA20, EA25, EA26, EA32 Equal straight union EBS0001 EBS0002 EBS0003 EBS0004 EBS0005 Unequal straight union EBS1001 EBS1002 EBS1003 EBS1004 EBS1005 EBS1006 EBS1007 EBS1008 EBS1009 Male straight union EBS2001 EBS2002 EBS2003 EBS2004 EBS2005 EBS2006 EBS2007 EBS2008 EBS2009 EBS2010 EBS2011 EBS2012 EBS2013 Female straight union EBS3001 EBS3002 EBS3003 EBS3004 EBS3005 EBS3006 EBS3007 EBS3008 EBS3009 EBS3010 Female swivel straight union EBS4001 EBS4002 EBS4003 EBS4004 EBS4005 EBS4006 EBS4007 EBS4008 EBS4009 EBS4010 Equal elbow EBL0001 EBL0002 EBL0003 EBL0004 EBL0005 45° elbow EBL1001 EBL1002 EBL1003 EBL1004 EBL1005 Male elbow EBL2001 EBL2002 EBL2003 EBL2004 EBL2005 EBL2006 EBL2007 EBL2008 EBL2009 EBL2010 EBL2011 Female elbow EBL3001 EBL3002 EBL3003 EBL3004 EBL3005 EBL3006 EBL3007 EBL3008 Female plated elbow EBL4001 EBL4002 EBL4003 EBL4004 EBL4005 Female swivel elbow EBL5001 EBL5002 EBL5003 EBL5004 EBL5005 EBL5006 EBL5007 EBL5008 EBL5009 Equal tee EBT0001 EBT0002 EBT0003 EBT0004 EBT0005 Unequal tee EBT1001 EBT1002 EBT1003 EBT1004 EBT1005 EBT1006 EBT1007 EBT1008 EBT1009 EBT1010 EBT1011 EBT1012 EBT1013 EBT1014 EBT1015 EBT1016 EBT1017 EBT1018 EBT1019 EBT1020 EBT1021 EBT1022 EBT1023 EBT1024 EBT1025 EBT1026 EBT1027 EBT1028 EBT1029 EBT1030 EBT1031 EBT1032 EBT1033 EBT1034 EBT1035 EBT1036 EBT1037 EBT1038 EBT1039 EBT1040 Female tee EBT2001 EBT2002 EBT2003 EBT2004 EBT2005 EBT2006 EBT2007 EBT2008 EBT2009 EBT2010 EBT2011 EBT2012 End cap EBD0001 EBD0002 EBD0003 EBD0004 EBD0005 Radiator elbow - long 300 mm EBL6001 Compression x press straight union EBS5001 EBS5002 EBS5003 EBS5004 EBS5005 EBS5006 EBS5007 EBS5008 EBS5009 EBS6001 EBS6002 EBS6003 EBS6004 EBS6005 EBS6006 EBS6007 EBS6008 EBS6009 EBS6010 EBS6011 EBS6012 EBS6013 EBS6014 EBS6015 EBS6016 EBS6017 EBS6018 EBS6019 EBS6020 EBS6021 EBS6022 EBS6023 Compression x press elbow EBL8001 EBL8002 EBL9001 EBL9002 Welded x press straight union EBS7001 EBS7002 EBS7003 EBS7004 EBS7005 EBS7006 EBS7007 EBS7008 EBS8001 EBS8002 EBS8003 EBS8004 EBS8005 EBS8006 EBS8007 EBS8008 Shower bracket - 150 mm EBL7001 Female swivel straight union adaptor EBS9001 EBS9002

Approval Holder:

Shandong EFIELD Piping System Co., Ltd.

Company Name

Shandong EFIELD Piping System Co., Ltd.

Address

No.2369 Yikang Road South Section, Economic Development Zone, Tengzhou City, Zaozhuang City, Shandong

Country

China

Phone

+86-632-5990659

General Email

William.wang@efieldgroup.com

View All Listings by this Company

Range of brass press fittings for use with MLC PE-RT/AL/PE-RT pipe. Maximum operating pressure 10 bar. Maximum operating temperature 80°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

260104016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Multipipe and size on fitting. Multipipe, size and product info on pipe.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

120200 16x16mm Coupling brass press-fit 120300 20x20mm Coupling brass press-fit 120320 20x16mm Reduced Coupling brass press-fit 120400 25x25mm Coupling brass press-fit 120420 25x16mm Reduced Coupling brass press-fit 120430 25x20mm Reduced Coupling brass press-fit 120500 32x32mm Coupling brass press-fit 120530 32x20mm Reduced Coupling brass press-fit 120540 32x25mm Reduced Coupling brass press-fit 120600 40x40mm Coupling brass press-fit 120640 40x25mm Reduced Coupling brass press-fit 120650 40x32mm Reduced Coupling brass press-fit 120700 50x50mm Coupling brass press-fit 120750 50x32mm Reduced Coupling brass press-fit 120760 50x40mm Reduced Coupling brass press-fit 120800 63x63mm Coupling brass press-fit 120860 63x40mm Reduced Coupling brass press-fit 120870 63x50mm Reduced Coupling brass press-fit 121200 16x16mm Elbow 90° brass press-fit 121300 20x20mm Elbow 90° brass press-fit 121400 25x25mm Elbow 90° brass press-fit 121500 32x32mm Elbow 90° brass press-fit 121600 40x40mm Elbow 90° brass press-fit 121700 50x50mm Elbow 90° brass press-fit 121800 63x63mm Elbow 90° brass press-fit 122200 16x16x16mm Tee brass press-fit 122232 16x20x16mm Reducing Tee brass press-fit 122300 20x20x20mm Tee brass press-fit 122322 20x16x16mm Reducing Tee brass press-fit 122323 20x16x20mm Reducing Tee brass press-fit 122332 20x20x16mm Reducing Tee brass press-fit 122343 20x25x20mm Reducing Tee brass press-fit 122400 25x25x25mm Tee brass press-fit 122422 25x16x16mm Reducing Tee brass press-fit 122423 25x16x20mm Reducing Tee brass press-fit 122424 25x16x25mm Reducing Tee brass press-fit 122433 25x20x20mm Reducing Tee brass press-fit 122434 25x20x25mm Reducing Tee brass press-fit 122442 25x25x16mm Reducing Tee brass press-fit 122443 25x25x20mm Reducing Tee brass press-fit 122500 32x32x32mm Tee brass press-fit 122525 32x16x32mm Reducing Tee brass press-fit 122535 32x20x32mm Reducing Tee brass press-fit 122544 32x25x25mm Reducing Tee brass press-fit 122545 32x25x32mm Reducing Tee brass press-fit 122600 40x40x40mm Tee brass press-fit 122636 40x20x40mm Reducing Tee brass press-fit 122646 40x25x40mm Reducing Tee brass press-fit 122655 40x32x32mm Reducing Tee brass press-fit 122656 40x32x40mm Reducing Tee brass press-fit 122700 50x50x50mm Tee brass press-fit 122747 50x25x50mm Reducing Tee brass press-fit 122757 50x32x50mm Reducing Tee brass press-fit 122767 50x40x50mm Reducing Tee brass press-fit 122800 63x63x63mm Tee brass press-fit 122868 63x40x63mm Reducing Tee brass press-fit 122878 63x50x63mm Reducing Tee brass press-fit 123220 16x1/2" MT Connection brass press-fit 123230 16x3/4" MT Connection brass press-fit 123320 20x1/2" MT Connection brass press-fit 123330 20x3/4" MT Connection brass press-fit 123340 20x1" MT Connection brass press-fit 123430 25x3/4" MT Connection brass press-fit 123440 25x1" MT Connection brass press-fit 123540 32x1" MT Connection brass press-fit 123550 32x1.25 MT Connection brass press-fit 123650 40x1-1/4" MT Connection brass press-fit 123660 40x1-1/2" MT Connection brass press-fit 123760 50x1-1/2" MT Connection brass press-fit 123770 50x2" MT Connection brass press-fit 123870 63x2" MT Connection brass press-fit 124220 16x1/2" FT Connection brass press-fit 124230 16 x 3/4 " FT Connection Brass Press Fit 124320 20x1/2" FT Connection brass press-fit 124330 20x3/4" FT Connection brass press-fit 124430 25x3/4" FT Connection brass press-fit 124440 25x1" FT Connection brass press-fit 124540 32x1" FT Connection brass press-fit 124550 32x1-1/4" FT Connection brass press-fit 124650 40x1-1/4" FT Connection brass press-fit 124660 40x1-1/2" FT Connection brass press-fit 124760 50x1-1/2" FT Connection brass press-fit 124870 63x2" FT Connection brass press-fit 125220 16x1/2"FT Swivel Nut brass press fit 125230 16x3/4"FT Swivel Nut brass press fit 125320 20x1/2"FT Swivel Nut brass press fit 125330 20x3/4"FT Swivel Nut brass press fit 125430 25x3/4"FT Swivel Nut brass press fit 125440 25x1"FT Swivel Nut brass press fit 125540 32x1"FT Unplated Swivel Nut brass press fit 125550 32x1-1/4"FT Swivel Nut brass press fit 126222 16x1/2"FTx16mm Tee brass press-fit 126323 20x1/2"FTx20mm Tee brass press-fit 126424 25x1/2"FTx25mm Tee brass press-fit 126434 25x3/4"FTx25mm Tee brass press-fit 126848 63x1"FTx63mm Tee brass press-fit 128500 32x32mm 45° Elbow brass press-fit 128600 40x40mm 45° Elbow brass press-fit 128700 50x50mm 45° Elbow brass press-fit 128800 63x63mm 45° Elbow brass press-fit 129220 16x1/2" MT Elbow 90° brass press-fit 129320 20x1/2" MT Elbow 90° brass press-fit 129330 20x3/4" MT Elbow 90° brass press-fit 129430 25x3/4" MT Elbow 90° brass press-fit 129540 32x1" MT Elbow 90° brass press-fit 130220 16x1/2" FT Elbow 90° brass press-fit 130320 20x1/2" FT Elbow 90° brass press-fit 130330 20x3/4" FT Elbow 90° brass press-fit 130430 25x3/4" FT Elbow 90° brass press-fit 130540 32x1" FT Elbow 90° brass press-fit 132220 16x1/2"FT Backplate Elbow brass press fit 132320 20x1/2"FT Backplate Elbow brass press fit 135200 16mm press lever ball valve 150200 16x2mm Stop End press fit 150300 20x2.25mm Stop End press fit 150400 25x2.5mm Stop End press fit 150500 32x3mm Stop End press fit 160130 Type 1 12x15mm Nut & Insert Adapter Nickel (3 pie 160230 Type 1 16x15mm Nut & Insert Adapter Nickel (3 pie 161230 Hydris Type 1 16x15mm Compression Adaptor 3-piece 161340 Hydris Type 1 20x22mm Compression Adaptor 3-piece 163230 Type 3 16x15mm Brass Spigot Adapter Press-Fit 163340 Type 3 20x22mm Brass Spigot Adapter Press-Fit 163230 Type 3 16x15mm Brass Spigot Adapter Press-Fit 163340 Type 3 20x22mm Brass Spigot Adapter Press-Fit 164230 Type 3 16x15mm Copper Spigot Adapter Press-Fit 164340 Type 3 20x22mm Copper Spigot Adapter Press-Fit 164440 Type 3 25x22mm Copper Spigot Adapter Press-Fit 164450 Type 3 25x28mm Copper Spigot Adapter Press-Fit 164550 Type 3 32x28mm Copper Spigot Adapter Press-Fit 165232 16xCu15 x 150mm Radiator elbow Copper 165233 16xCu15 x 330mm Radiator elbow Copper 166230 Type 4 16x15mm Brass Press-Fit to Copper Comp 166340 Type 4 20x22mm Brass Press-Fit to Copper Comp 166440 Type 4 25x22mm Brass Press-Fit to Copper Comp 167230 Type 4 16x15mm Press-Fit Elbow to Copper Comp 169232 16xCu15 x 150mm Radiator elbow chrome plate 169233 16xCu15 x 330mm Radiator elbow Chrome Plate 175230 Type 5 MLC to Press copper 16x15mm M Profile 175330 Type 5 MLC to Press copper 20x15mm M Profile 175340 Type 5 MLC to Press copper 20x22mm M Profile 175440 Type 5 MLC to Press copper 25x22mm M Profile 135300 20mm press lever ball valve 135400 25mm press lever ball valve 135500 32mm press lever ball valve 135600 40mm press lever ball valve 135700 50mm press lever ball valve 135800 63mm press lever ball valve 20-03124 Eurocone (3/4" FT) Pipe Connector 12x1.4mm (3-piece) 20-03141 Eurocone (3/4" FT) Pipe Connector 14x2mm (3-piece) 20-03201 Eurocone (3/4"FT) Pipe Connector 20x2.25mm (3 Piece) 20-03161 Eurocone (3/4" FT) Pipe Connector 16x2mm (3-piece) 20-03171 Eurocone (3/4" FT) Pipe Connector 17x2mm (3-piece) 20-03123 Eurocone (3/4" FT) Pipe Connector 12x1.6mm (3-piece) 101320 20x2.25mm MLC pipe 50m coil 101220 16x2mm MLC pipe 50m coil 101230 16x2mm MLC pipe 75m coil 101240 16x2mm MLC pipe 100m coil 101250 16x2mm MLC pipe 120m coil 101260 16x2mm MLC pipe 200m coil 101270 16x2mm MLC pipe 500m coil 101420 25x2.5mm MLC pipe 50m coil 109221 16x2mm MLC pipe 50m coil 9mm Insulated Blue 109222 16x2mm MLC pipe 50m coil 9mm Insulated Red 109421 25x2.5mm MLC pipe 50m coil 9mm Insulated Blue 109422 25x2.5mm MLC pipe 50m coil 9mm Insulated Red 109521 32x3mm MLC pipe 50m coil 9mm Insulated Blue 109522 32x3mm MLC pipe 50m coil 9mm Insulated Red 110321 20x2.25mm MLC pipe 50m coil 13mm pre-ins Grey 101510 32x3mm MLC pipe 25m coil 103216 16x2mm MLC straight length 3m 103425 25x2.5mm MLC straight length 3m 103532 32x3mm MLC straight length 3m 105016 16x2mm MLC straight length 5m 105020 20x2.25mm MLC straight length 5m 105025 25x2.5mm MLC straight length 5m 105032 32x3mm MLC straight length 5m 105040 40x4mm MLC straight length 5m 105050 50x4.5mm MLC straight length 5m 105063 63x6mm MLC straights 5m 105075 75x7.5mm MLC straight length 5m 105090 90x8.5mm MLC straight length 5m 105110 110x10mm MLC straight length 5m 109321 20x2.25mm MLC pipe 50m coil 9mm Insulated Blue 109322 20x2.25mm MLC pipe 50m coil 9mm Insulated Red 110221 16x2mm MLC pipe 50m coil 13mm pre-ins Grey 110421 25x2.5mm MLC pipe 50m coil 13mm pre-ins Grey 110521 32x3mm MLC pipe 50m coil 13mm pre-ins Grey 109323 20x2.25mm MLC pipe 50m coil 9mm Insulated Grey

Approval Holder:

Multipipe Ltd

Company Name

Multipipe Ltd

Address

Unit 12 Great Hayes Business Park Lower Burnham Road Chelmsford

Postcode

CM3 6SQ

Country

Chelmsford

View All Listings by this Company

Instantor range of PPSU TH profile press fittings for use with Instantor Pert-AL-Pert pipe. Maximum operating pressure 10 bar. Maximum operating temperature 95°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

260104017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See below.

Marking:

TH, Sanbra Fyffe S logo & size on sleeve. Dimension on body. ISO 21003, Instantor, and other technical information on pipe.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

PP10001 Instantor PPSU Straight Coupler 16mm PP10002 Instantor PPSU Straight Coupler 20mm PP10003 Instantor PPSU Straight Coupler 26mm PP10004 Instantor PPSU Straight Coupler 32mm PP10021 Instantor PPSU Straight Coupler 20mm x 16mm PP10032 Instantor PPSU Straight Coupler 26mm x 20mm PP10043 Instantor PPSU Straight Coupler 26mm x 32mm PP11001 Instantor PPSU straight Coupler 1/2"M x 16mm PP11002 Instantor PPSU straight Coupler 3/4"M x 20mm PP11003 Instantor PPSU straight Coupler 1"M x 26mm PP11012 Instantor PPSU straight Coupler 1/2"M x 20mm PP11021 Instantor PPSU straight Coupler 3/4"M x 16mm PP12001 Instantor PPSU Straight Coupler 1/2"F x 16mm PP12002 Instantor PPSU Straight Coupler 3/4"F x 20mm PP12003 Instantor PPSU Straight Coupler 1"F x 26mm PP15001 Instantor PPSU Elbow 16mm PP15002 Instantor PPSU Elbow 20mm PP15003 Instantor PPSU Elbow 26mm PP15004 Instantor PPSU Elbow 32mm PP16001 Instantor PPSU Elbow 1/2"M x 16mm PP16002 Instantor PPSU Elbow 3/4"M x 20mm PP16003 Instantor PPSU Elbow 1"M x 26mm PP16012 Instantor PPSU Elbow 1/2"M x 20mm PP17001 Instantor PPSU Elbow 1/2" F x 16mm PP17002 Instantor PPSU Elbow 3/4" F x 20mm PP17003 Instantor PPSU Elbow 1" F x 26mm PP17012 Instantor PPSU Elbow 1/2" F x 20mm PP18001 Instantor PPSU Tee 16mm PP18002 Instantor PPSU Tee 20mm PP18003 Instantor PPSU Tee 26mm PP18004 Instantor PPSU Tee 32mm PP18112 Instantor PPSU Reducing Tee 16X16X20 PP18211 Instantor PPSU Reducing Tee 20X16X16 PP18212 Instantor PPSU Reducing Tee 20X16X20 PP18221 Instantor PPSU Reducing Tee 20X20X16 PP18313 Instantor PPSU Reducing Tee 26X16X26 PP18322 Instantor PPSU Reducing Tee 26X20X20 PP18323 Instantor PPSU Reducing Tee 26X20X26 PP18331 Instantor PPSU Reducing Tee 26X26X16 PP18332 Instantor PPSU Reducing Tee 26X26X20 PP51001 Instantor PPSU Stop End 16mm PP51002 Instantor PPSU Stop End 20mm PP51003 Instantor PPSU Stop End 26mm IPAP801 Instantor Pert-Al-Pert Pipe 16mm x 100M IPAP802 Instantor Pert-Al-Pert Pipe 20mm x 100M IPAP803 Instantor Pert-Al-Pert Pipe 26mm x 50M IPAP804 Instantor Pert-Al-Pert Pipe 32mm x 25M IPAP901 Instantor Pert-Al-Pert Pipe 16mm x 100M Silver Insulation IPAP902 Instantor Pert-Al-Pert Pipe 20mm x 100M Silver Insulation IPAP903 Instantor Pert-Al-Pert Pipe 26mm x 25M Silver Insulation IPAP904 Instantor Pert-Al-Pert Pipe 32mm x 25M Silver Insulation

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Instantor Works Santry Avenue Dublin

Postcode

D09 K160

Country

Ireland

Phone

+353(0)1 842 6255

General Email

Ryan.Charleson@Instantor.ie

View All Listings by this Company