'Rashmi Blast Furnace Slag Cement Mortar'. Factory applied, grey coloured, blast furnace slag cement mortar. Mix cement, sand & water in a mass ratio of 1:1.5:0.6 and apply as per manufacturer's work instructions 'RML/DI/WI/CMLC-10', 'Rev: 02', dated '12.10.2023'. Cure for 120 minutes@50°C, 98% RH. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.
'Aqua-GRP Water Tank Panel'. Off-white coloured, hot press moulded GRP tank panel. For use with water up to 65°C.
'Sangwon Korea 2026 Premium One Tank Panel'. Light grey coloured, hot press moulded GRP panel. For use with water up to 55°C.
'BADAMID A70 GF50 HE WL BLACK'. Black coloured, injection moulded, glass fibre reinforced PA66 material. For use with water up to 85°C.
'BADAMID A70 GF30 HE WL BLACK'. Black coloured, injection moulded, glass fibre ranforced PA66 material. For use with water up to 85°C.
Grivory GV-2H natural & GV-2H black 9915. GV-2 FWA natural & GV-2 FWA black 9225. GV-4H natural & GV-4H black 9915. GV-4 FWA natural & GV-4 FWA black 9225. GV-5H natural & GV-5H black 9915. GV-5 FWA natural, GV-5 FWA black 9225 & Grivory XE 4275 black 9225. GV-6H natural & GV-6H black 9915. GV-6 FWA natural & GV-6 FWA black 9225. Injection moulded, natural (appears white) or black coloured, glass reinforced nylon materials. For use with water up to 23°C.
'Grivory GV XE 10726 Black 9225'. Black coloured, injection moulded, glass reinforced polyamide material. For use with water up 23°C.
'Avaspire AV-651 BK95'. Black coloured, injection moulded PEEK (part of the PAEK family) material. For use with water up to 85°C.
'Takweenplast Series HDPE Fittings'. Black coloured, injection moulded HDPE fittings. For use with water up to 60°C.
'OL01 HDPE Fitting'. Black coloured, injection moulded HDPE fitting. For use with water up to 60°C.
'PVDF Solef® 6008/0001'. White/off-white coloured (translucent), injection moulded PVDF material. For use with water up to 85°C.
'5594903 'O' rings'. Black coloured, compression moulded EPDM 'O' rings. Shore hardness 90. Tested in-radii sizes between 0.4mm and 3.65mm. For use with water up to 85°C.
'5594610'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.
Range of smart Bidet assemblies with sensor actuated solenoid valves and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 8.0 Bar Maximum operating temperature Cold water use only
'C-DE'. Black coloured, compression moulded Butyl rubber membrane. Shore hardness 65. Tested in-radius size 1.0mm. For use with water up to 23°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| GT6002R-D-** | Various | hot/cold water inlet：M8x1, 1/2 BSP(F) Boiling water inlet:M8x1 | hot/cold water path: 10bar Boiling water path:5bar bar | hot/cold water path: 65℃ Boiling water path: 99℃ °C | GETTAI | On handle | No | Ceramic cartridge | Metal Backnuts | Aerator | |
| GT6002R-** | Various | hot/cold water inlet：M8x1, 1/2 BSP(F) Boiling water inlet:M8x1 | hot/cold water path: 10bar Boiling water path:5bar bar | hot/cold water path: 65℃ Boiling water path: 99℃ °C | GETTAI | On handle | No | Ceramic cartridge | Metal Backnuts | Aerator | |
| GT6024-** | Various | hot/cold water inlet：M8x1, 1/2 BSP(F) Boiling water inlet:M8x1 | hot/cold water path: 10bar Boiling water path:5bar bar | hot/cold water path: 65℃ Boiling water path: 99℃ °C | GETTAI | On handle | No | Ceramic cartridge | Metal Backnuts | Aerator | |
| GT6616-** | Various | hot/cold water inlet：M10x1, 1/2 BSP(F) Boiling water inlet:M10x1 | hot/cold water path: 10bar Boiling water path:5bar bar | hot/cold water path: 65℃ Boiling water path: 99℃ °C | GETTAI | On Body | No | Ceramic cartridge | Metal Backnuts | Aerator |
GT6002R-D-** & GT6002R-** only differ in spout Model code: “**” means different finishes -LC Brushed -LE Polished -MOB Matt Black -BK Steel Black -BS PVD Black -GM Gun Metal -CO Copper -GD Gold -TGD Titanium Gold
WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 Bar
Two-hole, single outlet, (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with a single lever operating member and a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3). The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts, shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S001* | Various | 1/2" BSP (F) | 5 bar | 65 °C | WINSDRUM | On cover plate | No | Ceramic cartridge | Not Applicable | Aerator | Shower Hose, Handset, |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| KITM03 | Chrome | ½” Captive nut. | 0 bar | 65 °C | Deva | on handset | No | Shower Hose, Handset, Riser Rail, | |||
| SIGKITM02 | Chrome | ½” Captive nut. | 0 bar | 65 °C | Deva | on handset | No | Shower Hose, Handset, Riser Rail, | |||
| SIGKITS01 | Chrome | ½” Captive nut. | 0 bar | 65 °C | Deva | on handset | No | Shower Hose, Handset, Riser Rail, |
Page 442 of 443
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
