Range of copper press fittings with EPDM ‘O’-rings for use with EN1057 copper tube. The joints are achieved by means of a press tool. For above and below ground use (sizes 12mm-54mm only. 66.7mm, 76.1mm, 88.9mm & 108mm for above ground use only) Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2107342

Size:

12mm - 108mm.

Marking:

<A> logo, WRAS & size on body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

Press fitting-elbow 90° 15mm, 22mm, 28mm, 35mm, 42mm, 54mm APW5002 0150000 APW5002 0220000 APW5002 0280000 APW5002 0350000 APW5002 0420000 APW5002 0540000: Press fitting-elbow 90°FTGXC MP5092:15mm, 22mm, 28mm, 35mm, 42mm, 54mm APW5092 0150000 APW5092 0220000 APW5092 0280000 APW5092 0350000 APW5092 0420000 APW5092 0540000 Press fitting-elbow 45° CXC APW5041: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm APW5041 0150000 APW5041 0220000 APW5041 0280000 APW5041 0350000 APW5041 0420000 APW5041 0540000 Press fitting-elbow 45°FtgxC APW5040 : 15mm, 22mm, 28mm, 35mm, 42mm, 54mm APW5040 0150000 APW5040 0220000 APW5040 0280000 APW5040 0350000 APW5040 0420000 APW5040 0540000 Press fitting-crossover CXC MP5085: 15mm, 22mm, 28mm APW5085 0150000 APW5085 0220000 APW5085 0280000 Press fitting-crossover FTGXC APW5086: 15mm, 22mm, 28mm APW5086 0150000 APW5086 0180000 APW5086 0220000 Press fitting-Straight Coupling APW5270: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm APW5270 0150000 APW5270 0220000 APW5270 0280000 APW5270 0350000 APW5270 0420000 APW5270 0540000 Press fitting-equal tee APW5130: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm APW5130 0151515 APW5130 0222222 APW5130 0282828 APW5130 0353535 APW5130 0424242 APW5130 0545454 Press fitting-reducing Tee APW5130R 15x15x22mm APW5130 0151522 22x15x15mm APW5130 0221515 22x15x22mm APW5130 0221522 22x22x15mm APW5130 0222215 22x22x28mm APW5130 0222228 28x15x15mm APW5130 0281515 28x15x22mm APW5130 0281522 28x22x15mm APW5130 0282215 28x22x22mm APW5130 0282222 28x22x28mm APW5130 0282228 28x28x15mm APW5130 0282815 28x28x22mm APW5130 0282822 28x28x35mm APW5130 0282835 35x22x22mm APW5130 0352222 35x22x35mm APW5130 0352235 35x28x22mm APW5130 0352822 35x28x28mm APW5130 0352828 35x28x35mm APW5130 0352835 35x35x15mm APW5130 0353515 35x35x22mm APW5130 0353522 35x35x28mm APW5130 0353528 42x28x28mm APW5130 0422828 42x35x35mm APW5130 0423535 42x28x42mm APW5130 0422842 42x35x42mm APW5130 0423542 42x42x15mm APW5130 0424215 42x42x22mm APW5130 0424222 42X42X28mm APW5130 0424228 42X42X35mm APW5130 0424235 54X54X15mm APW5130 0545415 54X54X28mm APW5130 0545428 54X54X35mm APW5130 0545435 54X42X42mm APW5130 0544242 54X54X42mm APW5130 0545442 Press fitting-fitting reducer FTGXC APW5243 22x15mm APW5243 0221500 28x15mm APW5243 0281500 28x22mm APW5243 0282200 35x15mm APW5243 0351500 35x22mm APW5243 0352200 35x28mm APW5243 0352800 42x15mm APW5243 0421500 42x22mm APW5243 0422200 42x28mm APW5243 0422800 42x35mm APW5243 0423500 54x15mm APW5243 0541500 54x22mm APW5243 0542200 54x28mm APW5243 0542800 54x35mm APW5243 0543500 54x42mm APW5243 0544200 Press fitting- reduced Coupler CXC APW5240 22x15mm APW5240 0221500 28x15mm APW5240 0281500 28x22mm APW5240 0282200 35x15mm APW5240 0351500 35x22mm APW5240 0352200 35x28mm APW5240 0352800 42x15mm APW5240 0421500 42x22mm APW5240 0422200 42x28mm APW5240 0422800 42x35mm APW5240 0423500 54x15mm APW5240 0541500 54x22mm APW5240 0542200 54x28mm APW5240 0542800 54x35mm APW5240 0543500 54x42mm APW5240 0544200 Press fitting-end stop MP5301: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm APW5301 0150000 APW5301 0220000 APW5301 0350000 APW5301 0420000 APW5301 0540000

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of WC dual flush drop valve comprising of a plastic body, silicone seating washer and an internal overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2107159

Note:

Open outlet use only.

Size:

See models.

Marking:

Plumbright on the body. WRAS & Model code on body

Installation Requirements:

R001 R571

Expiry date:

31/07/2026

Model:

137004 PLUMBRIGHT: 1½” BSP (M),

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Country

United Kingdom

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Range of overhead showers with plastic body (various finishes). Overhead shower inlets incorporate a stainless steel strainer Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2110398

Note:

Open outlet use only.

Size:

Overhead showers – ½” BSP (F) Shower Handsets – ½” BSP (M)

Marking:

Bristan on handle on shower handsets

Installation Requirements:

R001 R040

Expiry date:

31/10/2026

Model:

HAND201 C HAND201 BLK HAND201 BB

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of Y type strainers with blue epoxy coated ductile iron bodies and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

Section:

1715 Strainers

Size:

DN50 up DN400 flanged inlet and outlet

Marking:

TROUVAY & CAUVIN, WRAS size and pressure on data plate on body. Size, pressure and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

TCDIYST16 TCDIYST25

Approval Holder:

TROUVAY & CAUVIN

Company Name

TROUVAY & CAUVIN

Address

P.O. Box 16954, Jebel Ali Free Zone

Country

United Arab Emirates

View All Listings by this Company

Basin pillar tap (chrome plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar Maximum operating temperature 60°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

2109921

Size:

½” BSP (M)

Marking:

Bristan Renaissance on indice

Installation Requirements:

R001 R006

Expiry date:

30/09/2026

Model:

RP3 RS HNK C

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company