Section:

0470 Combination Tap Assemblies

Description:

A Single hole tap(s) with a single outlet and a swivel spout.

Deck Mounted Capable of achieving AUK3 Tap Gap. Stainless Steel EPDM lined flexible inlet hoses. The product is supplied with 15x15mm compression isolation valves that incorporate single check valve cartridges, however, the complete assembly has not been fully tested to demonstrate it provides backflow protection.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

31/12/2030

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

0490 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a double outlet and a swivel spout.

Deck Mounted. Stainless steel braided, EPDM lined, inlet hoses. Capable of achieving AUK3 Tap Gap.

Installation Requirements:

R001 R006

Expiry date:

31/12/2030

Approval Holder:

MVI Hazel Ltd.

Company Name

MVI Hazel Ltd.

Address

1 Mygan Business Park, Jamestown Road, Finglas, Dublin 11

View All Listings by this Company

Fastwarm range of M type press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404080

Size:

see models

Marking:

FASTWARM, size & underfloor heating on fitting.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

STRAIGHT COUPLING CxC: FW-KM101-S1515 15mm FW-KM101-S2222 22mm FW-KM101-S2828 28mm FW-KM101-S3535 35mm FW-KM101-S4242 42mm FW-KM101-S5454 54mm FW-KM101-S6767 66.7mm FW-KM101-S7676 76.1mm FW-KM101-S8989 88.9mm FW-KM101-S108108 108mm SLIP COUPLING C x C: FW-KML102-S1515 15mm FW-KML102-S2222 22mm FW-KML102-S2828 28mm FW-KML102-S3535 35mm FW-KML102-S4242 42mm FW-KML102-S5454 54mm FW-KML102-S6767 66.7mm FW-KML102-S7676 76.1mm FW-KML102-S8989 88.9mm FW-KML102-S108108 108mm REDUCING COUPLING C x C: FW-KM107-S2215 22mm x 15mm FW-KM107-S2815 28mm x 15mm FW-KM107-S2822 28mm x 22mm FW-KM107-S3515 35mm x 15mm FW-KM107-S3522 35mm x 22mm FW-KM107-S3528 35mm x 28mm FW-KM107-S4215 42mm x 15mm FW-KM107-S4222 42mm x 22mm FW-KM107-S4228 42mm x 28mm FW-KM107-S4235 42mm x 35mm FW-KM107-S5422 54mm x 22mm FW-KM107-S5428 54mm x 28mm FW-KM107-S5435 54mm x 35mm FW-KM107-S5442 54mm x 42mm FW-KM107-S6728 66.7mm x 28mm FW-KM107-S6735 66.7mm x 35mm FW-KM107-S6742 66.7mm x 42mm FW-KM107-S6754 66.7mm x 54mm FW-KM107-S7635 76.1mm x 35mm FW-KM107-S7642 76.1mm x 42mm FW-KM107-S7654 76.1mm x 54mm FW-KM107-S7667 76.1mm x 66.7mm FW-KM107-S8942 88.9mm x 42mm FW-KM107-S8954 88.9mm x 54mm FW-KM107-S8967 88.9mm x 66.7mm FW-KM107-S8976 88.9mm x 76.1mm FW-KM107-S10842 108mm x 42mm FW-KM107-S10854 108mm x 54mm FW-KM107-S10867 108mm x 66.7mm FW-KM107-S10876 108mm x 76.1mm FW-KM107-S10889 108mm x 88.9mm FITTING REDUCER F x C: FW-KM108-S2215 22mm x 15mm FW-KM108-S2815 28mm x 15mm FW-KM108-S2822 28mm x 22mm FW-KM108-S3515 35mm x 15mm FW-KM108-S3522 35mm x 22mm FW-KM108-S3528 35mm x 28mm FW-KM108-S4215 42mm x 15mm FW-KM108-S4222 42mm x 22mm FW-KM108-S4228 42mm x 28mm FW-KM108-S4235 42mm x 35mm FW-KM108-S5415 54mm x 15mm FW-KM108-S5422 54mm x 22mm FW-KM108-S5428 54mm x 28mm FW-KM108-S5435 54mm x 35mm FW-KM107-S5415 54mm x 15mm FW-KM108-S5442 54mm x 42mm FW-KM108-S6728 66.7mm x 28mm FW-KM108-S6735 66.7mm x 35mm FW-KM108-S6742 66.7mm x 42mm FW-KM108-S6754 66.7mm x 54mm FW-KM108-S7635 76.1mm x 35mm FW-KM108-S7642 76.1mm x 42mm FW-KM108-S7654 76.1mm x 54mm FW-KM108-S7667 76.1mm x 66.7mm FW-KM108-S8942 88.9mm x 42mm FW-KM108-S8954 88.9mm x 54mm FW-KM108-S8967 88.9mm x 66.7mm FW-KM108-S8976 88.9mm x 76.1mm FW-KM108-S10842 108mm x 42mm FW-KM108-S10854 108mm x 54mm FW-KM108-S10867 108mm x 66.7mm FW-KM108-S10876 108mm x 76.1mm FW-KM108-S10889 108mm x 88.9mm 90DEG ELBOW C x C: FW-KM103-L1515 15mm FW-KM103-L2222 22mm FW-KM103-L2828 28mm FW-KM103-L3535 35mm FW-KM103-L4242 42mm FW-KM103-L5454 54mm FW-KM103-L6767 66.7mm FW-KM103-L7676 76.1mm FW-KM103-L8989 88.9mm FW-KM103-L108108 108mm 90DEG STREET ELBOW F x C: FW-KM104-L1515 15mm FW-KM104-L2222 22mm FW-KM104-L2828 28mm FW-KM104-L3535 35mm FW-KM104-L4242 42mm FW-KM104-L5454 54mm FW-KM104-L6767 66.7mm FW-KM104-L7676 76.1mm FW-KM104-L8989 88.9mm FW-KM104-L108108 108mm 45DEG ELBOW C x C: FW-KM105-L1515 15mm FW-KM105-L2222 22mm FW-KM105-L2828 28mm FW-KM105-L3535 35mm FW-KM105-L4242 42mm FW-KM105-L5454 54mm FW-KM105-L6767 66.7mm FW-KM105-L7676 76.1mm FW-KM105-L8989 88.9mm FW-KM105-L108108 108mm 45DEG STREET ELBOW F x C: FW-KM106-L1515 15mm FW-KM106-L2222 22mm FW-KM106-L2828 28mm FW-KM106-L3535 35mm FW-KM106-L4242 42mm FW-KM106-L5454 54mm FW-KM106-L6767 66.7mm FW-KM106-L7676 76.1mm FW-KM106-L8989 88.9mm FW-KM106-L108108 108mm CAP C x C: FW-KM111-D1515 15mm FW-KM111-D2222 22mm FW-KM111-D2828 28mm FW-KM111-D3535 35mm FW-KM111-D4242 42mm FW-KM111-D5454 54mm FW-KM111-D6767 66.7mm FW-KM111-D7676 76.1mm FW-KM111-D8989 88.9mm FW-KM111-D108108 108mm EQUAL TEE C x C: FW-KM109-T151515 15mm FW-KM109-T222222 22mm FW-KM109-T282828 28mm FW-KM109-T353535 35mm FW-KM109-T424242 42mm FW-KM109-T545454 54mm FW-KM109-T676767 66.7mm FW-KM109-T767676 76.1mm FW-KM109-T898989 88.9mm FW-KM109-T108108108 108mm PART CROSSOVER F x C: FW-KM113-L1515 15mm FW-KM113-L2222 22mm CROSSOVER C x C: FW-KM112-S1515 15mm FW-KM112-S2222 22mm REDUCER ELBOW FW-KM103-L2215 22mm x 15mm FW-KM103-L2815 28mm x 15mm FW-KM103-L2822 28mm x 22mm REDUCING TEE: FW-KM110-T221515 22mm x 15mm x 15mm FW-KM110-T222215 22mm x 22mm x 15mm FW-KM110-T282222 28mm x 22mm x 22mm FW-KM110-T282822 28mm x 28mm x 22mm FW-KM110-T281522 28mm x 15mm x 22mm FW-KM110-T282815 28mm x 28mm x 15mm FW-KM110-T352222 35mm x 22mm x 22mm FW-KM110-T353522 35mm x 35mm x 22mm FW-KM110-T353528 35mm x 35mm x 28mm FW-KM110-T423535 42mm x 35mm x 35mm FW-KM110-T152215 15mm x 22mm x 15mm FW-KM110-T222822 22mm x 28mm x 22mm FW-KM110-T221522 22mm x 15mm x 22mm FW-KM110-T281528 28mm x 15mm x 28mm FW-KM110-T282228 28mm x 22mm x 28mm FW-KM110-T351535 35mm x 15mm x 35mm FW-KM110-T352235 35mm x 22mm x 35mm FW-KM110-T352835 35mm x 28mm x 35mm FW-KM110-T421542 42mm x 15mm x 42mm FW-KM110-T422242 42mm x 22mm x 42mm FW-KM110-T422842 42mm x 28mm x 42mm FW-KM110-T423542 42mm x 35mm x 42mm FW-KM110-T541554 54mm x 15mm x 54mm FW-KM110-T542254 54mm x 22mm x 54mm FW-KM110-T542854 54mm x 28mm x 54mm FW-KM110-T543554 54mm x 35mm x 54mm FW-KM110-T544254 54mm x 42mm x 54mm FW-KM110-T672867 66.7mm x 28mm x 66.7mm FW-KM110-T673567 66.7mm x 35mm x 66.7mm FW-KM110-T674267 66.7mm x 42mm x 66.7mm FW-KM110-T675467 66.7mm x 54mm x 66.7mm FW-KM110-T762276 76.1mm x 22mm x 76.1mm FW-KM110-T762876 76.1mm x 28mm x 76.1mm FW-KM110-T763576 76.1mm x 35mm x 76.1mm FW-KM110-T764276 76.1mm x 42mm x 76.1mm FW-KM110-T765476 76.1mm x 54mm x 76.1mm FW-KM110-T766776 76.1mm x 66.7mm x 76.1mm FW-KM110-T894289 88.9mm x 42mm x 88.9mm FW-KM110-T895489 88.9mm x 54mm x 88.9mm FW-KM110-T896789 88.9mm x 66.7mm x 88.9mm FW-KM110-T897689 88.9mm x 76.1mm x 88.9mm FW-KM110-T10854108 108mm x 54mm x 108mm FW-KM110-T10867108 108mm x 66.7mm x 108mm FW-KM110-T10876108 108mm x 76.1mm x 108mm FW-KM110-T10889108 108mm x 88.9mm x 108mm

Approval Holder:

Fastwarm Limited

Company Name

Fastwarm Limited

Address

Unit 13 Carnival Park Basildon Essex

Postcode

SS14 3WN

Phone

01228 744 479

General Email

support@fastwarm.com

View All Listings by this Company

Range RP of M type press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404081

Size:

see models

Marking:

RP, size & WRAS on body. (Note: For 66.7mm models it will be marked as 67mm, for 76.1mm models it will be marked as 76mm, for 88.9mm it will be marked as 89mm)

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

STRAIGHT COUPLING CxC: CCP015 - 15mm CCP022 - 22mm CCP028 - 28mm CCP035 - 35mm CCP042 - 42mm CCP054 - 54mm CCP067 - 66.7mm CCP076 - 76.1mm CCP089 - 88.9mm CCP108 - 108mm SLIP COUPLING C x C: SCCP015 - 15mm SCCP022 - 22mm SCCP028 - 28mm SCCP035 - 35mm SCCP042 - 42mm SCCP054 - 54mm SCCP067 - 66.7mm SCCP076 - 76.1mm SCCP089 - 88.9mm SCCP108 - 108mm FITTING REDUCER F x C: FRCP022015 - 22mm x 15mm FRCP028015 - 28mm x 15mm FRCP028022 - 28mm x 22mm FRCP035015 - 35mm x 15mm FRCP035022 - 35mm x 22mm FRCP035028 - 35mm x 28mm FRCP042015 - 42mm x 15mm FRCP042022 - 42mm x 22mm FRCP042028 - 42mm x 28mm FRCP042035 - 42mm x 35mm FRCP054015 - 54mm x 15mm FRCP054022 - 54mm x 22mm FRCP054028 - 54mm x 28mm FRCP054035 - 54mm x 35mm FRCP054042 - 54mm x 42mm FRCP067028 - 66.7mm x 28mm FRCP067035 - 66.7mm x 35mm FRCP067042 - 66.7mm x 42mm FRCP067054 - 66.7mm x 54mm FRCP076035 - 76.1mm x 35mm FRCP076042 - 76.1mm x 42mm FRCP076054 - 76.1mm x 54mm FRCP076067 - 76.1mm x 66.7mm FRCP089042 - 88.9mm x 42mm FRCP089054 - 88.9mm x 54mm FRCP089067 - 88.9mm x 66.7mm FRCP089076 - 88.9mm x 76.1mm FRCP0108042 - 108mm x 42mm FRCP0108054 - 108mm x 54mm FRCP0108067 - 108mm x 66.7mm FRCP0108076 - 108mm x 76.1mm FRCP0108089 - 108mm x 88.9mm 90DEG ELBOW C x C: ECP015 - 15mm ECP022 - 22mm ECP028 - 28mm ECP035 - 35mm ECP042 - 42mm ECP054 - 54mm ECP067 - 66.7mm ECP076 - 76.1mm ECP089 - 88.9mm ECP108 - 108mm 90DEG STREET ELBOW F x C: SECP015 15mm SECP022 22mm SECP028 28mm SECP035 35mm SECP042 42mm SECP054 54mm SECP067 66.7mm SECP076 76.1mm SECP089 88.9mm SECP108 108mm 45DEG ELBOW C x C: OECP015 - 15mm OECP022 - 22mm OECP028 - 28mm OECP035 - 35mm OECP042 - 42mm OECP054 - 54mm OECP067 - 66.7mm OECP076 - 76.1mm OECP089 - 88.9mm OECP108 - 108mm 45DEG STREET ELBOW F x C: OSECP015 - 15mm OSECP022 - 22mm OSECP028 - 28mm OSECP035 - 35mm OSECP042 - 42mm OSECP054 - 54mm OSECP067 - 66.7mm OSECP076 - 76.1mm OSECP089 - 88.9mm OSECP108 - 108mm CAP C x C: SECCP015 - 15mm SECCP022 - 22mm SECCP028 - 28mm SECCP035 - 35mm SECCP042 - 42mm SECCP054 - 54mm SECCP067 - 66.7mm SECCP076 - 76.1mm SECCP089 - 88.9mm SECCP0108 - 108mm EQUAL TEE C x C: ETCP015 - 15mm ETCP022 - 22mm ETCP028 - 28mm ETCP035 - 35mm ETCP042 - 42mm ETCP054 - 54mm ETCP067 - 66.7mm ETCP076 - 76.1mm ETCP089 - 88.9mm ETCP108 - 108mm PART CROSSOVER F x C: PCCP015 - 15mm PCCP022 - 22mm CROSSOVER C x C: FCCP015 - 15mm FCCP022 - 22mm REDUCING TEE: RTCP022015015 - 22mm x 15mm x 15mm RTCP022022015 - 22mm x 22mm x 15mm RTCP028022022 - 28mm x 22mm x 22mm RTCP028015022 - 28mm x 15mm x 22mm RTCP028028015 - 28mm x 28mm x 15mm RTCP035022022 - 35mm x 22mm x 22mm RTCP035035022 - 35mm x 35mm x 22mm RTCP035035028 - 35mm x 35mm x 28mm RTCP042035035 - 42mm x 35mm x 35mm RTCP015022015 - 15mm x 22mm x 15mm RTCP022028022 - 22mm x 28mm x 22mm RTCP022015022 - 22mm x 15mm x 22mm RTCP028015028 - 28mm x 15mm x 28mm RTCP028022028 - 28mm x 22mm x 28mm RTCP035015035 - 35mm x 15mm x 35mm RTCP035022035 - 35mm x 22mm x 35mm RTCP035028035 - 35mm x 28mm x 35mm RTCP042015042 - 42mm x 15mm x 42mm RTCP042022042 - 42mm x 22mm x 42mm RTCP042028042 - 42mm x 28mm x 42mm RTCP042035042 - 42mm x 35mm x 42mm RTCP054015054 - 54mm x 15mm x 54mm RTCP054022054 - 54mm x 22mm x 54mm RTCP054028054 - 54mm x 28mm x 54mm RTCP054035054 - 54mm x 35mm x 54mm RTCP054042054 - 54mm x 42mm x 54mm RTCP067028067 - 66.7mm x 28mm x 66.7mm RTCP067035067 - 66.7mm x 35mm x 66.7mm RTCP067042067 - 66.7mm x 42mm x 66.7mm RTCP067054067 - 66.7mm x 54mm x 66.7mm RTCP076022076 - 76.1mm x 22mm x 76.1mm RTCP076028076 - 76.1mm x 28mm x 76.1mm RTCP076035076 - 76.1mm x 35mm x 76.1mm RTCP076042076 - 76.1mm x 42mm x 76.1mm RTCP076054076 - 76.1mm x 54mm x 76.1mm RTCP076067076 - 76.1mm x 66.7mm x 76.1mm RTCP089042089 - 88.9mm x 42mm x 88.9mm RTCP089054089 - 88.9mm x 54mm x 88.9mm RTCP089067089 - 88.9mm x 66.7mm x 88.9mm RTCP089076089 - 88.9mm x 76.1mm x 88.9mm RTCP108108054 - 108mm x 54mm x 108mm RTCP108108067 - 108mm x 66.7mm x 108mm RTCP108108076 - 108mm x 76.1mm x 108mm RTCP108108089 - 108mm x 88.9mm x 108mm

Product Images

Approval Holder:

Rapid Press Fittings Ltd

Company Name

Rapid Press Fittings Ltd

Address

2 Penrod Way Heysham Lancashire

Postcode

LA3 2UZ

Phone

(01524) 965100

General Email

jacobrelph@phd.ltd

View All Listings by this Company

'Instantor’ range of stainless-steel crimp fittings incorporating EPDM and ‘O’-rings for use with 'Instantor’ stainless steel pipe. Connection is achieved via M profile press jaws. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251202007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15, 18, 22, 28, 35, 42, 54, 76, 88, 108, 114, 139 and 168mm crimp. ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2” BSP (M or F – stated via model name). DN50 to DN150 Flanged.

Marking:

Instantor, model and size on fitting body. Instantor, size and product info on pipe.

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

Coupling from 15 to 168.3mm Material 1.4401/1.4404 & 1.4301/1.4307 SP410001 SP410002 SP410003 SP410004 SP410005 SP410006 SP410007 SP410008 SP410009 SP410010 SP410011 Slip Coupling from 15 to 108mm Material 1.4401/1.4404 & 1.4301/1.4307 SP4100S1 SP4100S2 SP4100S3 SP4100S4 SP4100S5 SP4100S6 SP4100S7 SP4100S8 SP4100S9 90Q Female-Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 SP415001 SP415002 SP415003 SP415004 SP415005 SP415006 SP415007 SP415008 SP415009 SP415010 SP415011 90Q Male - Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 SP435001 SP435002 SP435003 SP435004 SP435005 SP435006 SP435007 SP435008 SP435009 SP435010 SP435011 45Q Female-Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 SP445001 SP445002 SP445003 SP445004 SP445005 SP445006 SP445007 SP445008 SP445009 SP445010 SP445011 45Q Female - Male Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 SP425001 SP425002 SP425003 SP425004 SP425005 SP425006 SP425007 SP425008 SP425009 SP425010 SP425011 Female Angle Adapter from 15 1/2" to 1 1/4" Material 1.4401/1.4404 & 1.4301/1.4307 SP417001 SP417002 SP417003 SP417004 Male Angle Adapter from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP416001 SP416002 SP416003 SP416004 SP416005 SP416006 Female Elbow with Wall nut from 15 1/2" to 22 3/4" Material 1.4401/1.4404 & 1.4301/1.4307 SP421001 SP421002 90Q Elbow with Plane Ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 SPP15001 SPP15002 SPP15003 SPP15004 SPP15005 SPP15006 Valve connector with swivel in stainless Steel from 15 1/2" to 76.121/2" Material 1.4401/1.4404 & 1.4301/1.4307 SPS12001 SPS12002 SPS12003 SPS12004 SPS12005 SPS12006 SPS12007 SPS12008 Female tee threaded adaptor from 15 1/2" to 108 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP430001 SP430221 SP430002 SP430331 SP430332 SP430003 SP430441 SP430442 SP430443 SP430004 SP430551 SP430552 SP430553 SP430005 SP430661 SP430662 SP430663 SP430006 SP430772 SP430776 SP430882 SP430883 SP430886 SP430992 SP430993 SP420996 Reducer from 22-15 to 168.3-139.7 Material 1.4401/1.4404 & 1.4301/1.4307 SP419021 SP419031 SP419032 SP419041 SP419042 SP419043 SP419051 SP419052 SP419053 SP419054 SP419061 SP419062 SP419063 SP419064 SP419065 SP419072 SP419073 SP419074 SP419075 SP419076 SP419082 SP419083 SP419084 SP419085 SP419086 SP419087 SP419092 SP419093 SP419094 SP419095 SP419096 SP419097 SP419098 SP419099 SP419100 SP419101 SP419102 SP419103 SP419104 SP419105 Reducing tee from 22-15 to 168.3-139.7 Material 1.4401/1.4404 & 1.4301/1.4307 SP418221 SP418331 SP418332 SP418441 SP418442 SP418443 SP418551 SP418552 SP418553 SP418554 SP418661 SP418662 SP418663 SP418664 SP418665 SP418772 SP418773 SP418774 SP418775 SP418776 SP418882 SP418883 SP418884 SP418885 SP418886 SP418887 SP418992 SP418993 SP418994 SP418995 SP418996 SP418997 SP418998 SP418999 SP418101 SP418102 SP418103 SP418104 SP418105 SP418106 Equal Tee from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 SP418001 SP418002 SP418003 SP418004 SP418005 SP418006 SP418007 SP418008 SP418009 SP418010 SP418011 Female adaptor from 15 1/ 2" to 88.9 3" Material 1.4401/1.4404 & 1.4301/1.4307 SP412001 SP412012 SP412021 SP412002 SP412023 SP412032 SP412003 SP412034 SP412043 SP412004 SP412045 SP412054 SP412005 SP412065 SP412006 SP412070 SP412087 Male adaptor from 15 1/2" to 108 4" Material 1.4401/1.4404 & 1.4301/1.4307 SP411001 SP411012 SP411021 SP411002 SP411023 SP411032 SP411003 SP411034 SP411043 SP411004 SP411045 SP411054 SP411005 SP411065 SP411006 SP411070 SP411087 SP411099 Flanges adaptor PN16 from 15 DN16 to 108 DN16 Material 1.4401/1.4404 & 1.4301/1.4307 SP440001 SP440002 SP440003 SP440004 SP440005 SP440006 SP440007 SP440008 SP440009 Pre-formed pipe bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 SP400011 SP400012 SP400013 Stop End/Plug from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP451001 SP451002 SP451003 SP451004 SP451005 SP451006 SP451007 SP451007 SP451008 Air tube Pipe Bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 SP422001 SP422002 SP422003 Pipe Bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 SP400014 SP400015 SP400016 3 Pieces adaptor from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 SP424001 SP424002 SP424003 SP424004 SP424005 SP424006 Female -Female pipe bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 SP400017 SP400018 SP400019 Female connector from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP426001 SP426021 SP426002 SP426032 SP426003 SP426004 SP426005 SP426006 Male connector from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP427001 SP427021 SP427002 SP427032 SP427003 SP427004 SP427005 SP427006 Press flanged adaptor from 54 DN50 to 168.3 DN150 Material 1.4401/1.4404 & 1.4301/1.4307 SP428006 SP428007 SP428008 SP428009 SP428010 SP428011 45Q Male angle adaptor from 15 1/ 2" to 28 1" Material 1.4401/1.4404 & 1.4301/1.4307 SP433001 SP433002 SP433003 90Q Female angle adaptor 15 3/ 8" to 35 1 1/ 4" Material 1.4401/1.4404 & 1.4301/1.4307 SP434001 SP434002 SP434003 SP434004 90Q Female angle adaptor with swivel nut from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP480001 SP480002 SP480003 SP480004 SP480005 SP480006 Male Tee threaded adaptor from 15 1/2" to 35 11/4" Material 1.4401/1.4404 & 1.4301/1.4307 SP436001 SP436002 SP436003 SP436004 90Q Male angle adaptor from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP439001 SP439002 SP439003 SP439004 SP439005 SP439006 F41 Male union connector gas from 15 1/ 2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP U11001 SP U11012 SP U11023 SP U11002 SP U11003 SP U11034 SP U11004 SP U11005 SP U11006 Female Union connector gas from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP U12001 SP U12012 SP U12023 SP U12002 SP U12003 SP U12034 SP U12004 SP U12005 SP U12006 Union Gas Female threaded from 15 3/4" to 54 2"Material 1.4401/1.4404 & 1.4301/1.4307 SP481012 SP481002 SP481023 SP481003 SP481034 SP481004 SP481045 SP481005 SP481056 SP481006 Straight union with press fitting on both ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 SP460001 SP460002 SP460003 SP460004 SP460005 SP460006 Half coupling from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP470001 SP470002 SP470003 SP470004 SP470005 SP470006 SP470007 SP470008 SP470009 30Q Female-Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP483001 SP483002 SP483003 SP483004 SP483005 SP483006 SP483007 SP483008 SP483009 30Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 SP490001 SP490002 SP490003 SP490004 SP490005 SP490006 15Q Female-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP450001 SP450002 SP450003 SP450004 SP450005 SP450006 SP450007 SP450008 SP450009 60Q Female-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP482001 SP482002 SP482003 SP482004 SP482005 SP482006 SP482007 SP482008 SP482009 Flanges adaptor PN6 from 15 DN15 to 108 DN100 Material 1.4401/1.4404 & 1.4301/1.4307 SP452001 SP452002 SP452003 SP452004 SP452005 SP452006 SP452007 SP452008 SP452009 Pipe penetration from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP453001 SP453002 SP453003 SP453004 SP453005 SP453006 SP453007 SP453008 SP453009 Male plug from 16 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP454001 SP454002 SP454003 SP454004 SP454005 SP454006 SP454007 SP454008 SP454009 Weld Adaptor from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 SP455001 SP455002 SP455003 SP455004 SP455005 SP455006 60Q Elbow with plain ends from 15 to 54 Material (316L)1.4404 SP458001 SP458002 SP458003 SP458004 SP458005 SP458006 PIPE: ISSP 111 = 15 x 0.6 mm Material (316L) 1.4404 ISSP 112 = 22 x 0.7 mm Material (316L) 1.4404 ISSP 113 = 28 x 0.8 mm Material (316L) 1.4404 ISSP 114 = 35 x 1 mm Material (316L) 1.4404 ISSP 115 = 42 x 1.1mm Material (316L) 1.4404 ISSP 116 = 54 x 1.2 mm Material (316L) 1.4404 ISSP 117 = 76.1 x 1.5 mm Material (316L) 1.4404 ISSP118 = 88.9 x 2 mm Material (316L) 1.4404 ISSP120 139.7 x 2 mm Material (316L) 1.4404 ISSP121 168.3 x 2 mm Material (316L) 1.4404

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Instantor Works Santry Avenue Dublin

Postcode

D09 K160

Country

Ireland

Phone

+353(0)1 842 6255

General Email

Ryan.Charleson@Instantor.ie

View All Listings by this Company