Range of solder ring copper fittings for use with copper tube to EN 1057. The HLSRDPMFWT and HLSRDPMFZT models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208803

Size:

Solder ring: 8mm-54mm and ½” - 1” (see model). Threaded connections: 1” captive nut (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

HLSR11ECC-a Elbow 90 degree C X C: 8mm-54mm. HLSR11ECC-b Street Elbow 90 degree Ftg X C: 8mm-54mm. HLSR11ECC-c Street Elbow 45 degree Ftg X C: 8mm-54mm. HLSR11ECC-d Street Elbow 45 degree Long Turn Ftg X C: 8mm-54mm. HLSR11ECC-e Elbow 45 degree C X C: 8mm-54mm. HLSR11ECC-f Elbow 45 degree Long Turn C X C: 8mm-54mm. HLSR11ECC-g Street Elbow 90 degree Long Turn Ftg X C: 8mm-54mm. HLSR11ECC-h Elbow 90 degree Long Turn C X C: 8mm-54mm. HLSR20CC-a Slip Straight Coupling C X C: 8mm-54mm. HLSR20CC-b Straight Coupling with dot C X C: 8mm-54mm. HLSR20CC-c Straight Coupling with groove C X C: 8mm-54mm. HLSR21RCC-a Fitting Reducer Ftg X C: 8mm-54mm. HLSR21RCC-b Reducing Coupler C X C: 8mm-54mm and ½”-1”. HLSR30TCC Equal TEE CxCxC: 8mm-54mm. HLSR31TRC Reducing Tee CxCxC: 8mm-54mm. HLSR40CAP Cap: 8mm-54mm. HLSRBGQW Partial Crossover Ftg x C: 12mm-28mm. HLSRGQW Full Crossover C x C: 12mm-28mm. HLSRYJWT Reducing Elbow 90 degree C X C: 15mm-54mm. HLSRZDWT BENT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. HLSRZDZT STRAIGHT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. HLSRDPMFWT Bent Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut. HLSRDPMFZT Straight Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut.

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Range of solder ring brass fittings for use with copper tube (manufactured to EN 1057). The HLSR20CB-d tank connector incorporates an EPDM washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211801

Size:

Solder ring: 15mm-54mm (see model). Threaded connections: ¼”-2” BSP (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

HLSR11EB-a Female 90 Degree Elbow: 15mm-54mm x ¼”-2” BSP (F). HLSR11EB-b Male 90 Degree Elbow: 15mm-54mm x ¼”-2” BSP (M). HLSR11EB-c Wallplate: 15mm-22mm x ½”-¾” BSP (F). HLSR20CB-a Male Coupler: 15mm-54mm x ⅜”-2” BSP (M). HLSR20CB-b Female Coupler: 15mm-54mm x ⅜”-2” BSP (F). HLSR20CB-c S/R W/Plate Straight: 15mm-22mm x ¼”-¾” BSP (F). HLSR20CB-d Tank connector: 15mm-28mm x ½”-1” BSP (M). HLSR30TB-a Female Tee: 15mm-28mm x 15mm-28mm x ¼”-1¼” BSP (F). 15mm-28mm x ¼”-1” BSP (F) x 15mm-28mm. Models added July 2025: HLSR30TB-a Female Tee: 35mm-42mm x 35mm-42mm x ½” BSP (F).

Product Images

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Ebco Poly B range of compression fittings with gunmetal bodies, for use with PE80 pipe (manufactured to BS EN 12201). For above and below ground use. Maximum working pressure 12.5 bar. Cold water use only.

Section:

1120 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2205306

Size:

20mm - 63mm.

Marking:

Ebco (a brand name of Talis UK Ltd), body cast date (MM/YY) and foundry ID on body

Installation Requirements:

R001

Expiry date:

31/05/2027

Model:

Ebco Poly B range of fittings comprising of: Couplings: GCB20,GCB2025, GCB2032, GCB25, GCB2532,GCB2550, GCB32, GCB3263, GCB5020, GCB5032, GCB63, GCB6320, GCB6325, GCB6350, GCB50, GCB3220& GCB3225. Tees: GTB20, GTB25, GTB2520R, GTB32, GTB3220R, GTB3225R GTB50, GTB5020R, GTB5025R, GTB5032R, GTB6332, GTB6350R & GTB63. Elbows: GEB20, GEB25, GEB32, GEB3225R, GEB50 & GEB63. Adaptors: GAB2F20, GAB2M20, GAB3F25, GAB3M25, GAB4M32, GAB6F50, GAB6M50, GAB6M63, GAB8M63, GAB4F32 & GAB8F63. Joint Reducers: GJR2520B, GJR3225B.

Product Images

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Manufacturer:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

The 3G Metric Imperial range of plastic compression fittings with polypropylene bodies, compression nut and silicone seal for use with PE80 pipe (manufactured to BS EN 12201). Maximum working pressure: Fittings when used with PE100 pipe = 16.0 bar. Fittings when used with PE80 pipe = 12.0 bar. For above and below ground and cold water use only.

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206349

Size:

see model

Marking:

Philmac and size on nut

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

3G Metric Imperial Range: Wall Plate Elbow models: 98902200 20mm(½”) x ½” 98903100 25mm(¾”) x ½” 98903200 25mm(¾”) x ¾” End Cap models: 98902900 20(½") 98903900 25(¾") 98904900 32(1") 98905900 40(1¼") 98906900 50(1½") 98907900 63(2") Elbow models: 98902800 45˚ 20(½") 98903800 45˚ 25(¾") 98904800 45˚ 32(1") 98905800 45˚ 40(1¼") 98906800 45˚ 50(1½") 98907800 45˚ 63(2") 98952200 20(½") x 20(½") 98953300 25(¾") x 25(¾") 98954400 32(1") x 32(1") 98955500 40(1¼") x 40(1¼") 98956600 50(1½") x 50(1½") 98957700 63(2") x 63(2") 98962100 20(½") x ½" FI BSP 98962200 20(½") x ¾" FI BSP 98963100 25(¾") x ½" FI BSP 98963200 25(¾") x ¾" FI BSP 98963300 25(¾") x 1" FI BSP 98964300 32(1") x 1" FI BSP 98964400 32(1") x 1¼" FI BSP 98965400 40(1¼") x 1¼" FI BSP 98965500 40(1¼") x 1½" FI BSP 98966500 50(1½") x 1½" FI BSP 98966600 50(1½") x 2" FI BSP 98967600 63(2") x 2" FI BSP 98973200 25(¾") x ¾" MI BSP 98974300 32(1") x 1" MI BSP Joiner/Coupler models: 98912200 20(½") x 20(½") 98913300 25(¾") x 25(¾") 98914400 32(1") x 32(1") 98915500 40(1¼") x 40(1¼") 98916600 50(1½") x 50(1½") 98917700 63(2") x 63(2") Reducing Joiner/Coupler models: 98913200 25(¾") x 20(½") 98914200 32(1") x 20(½") 98914300 32(1") x 25(¾") 98915300 40(1¼") x 25(¾") 98915400 40(1¼") x 32(1") 98916300 50(1½") x 25(¾") 98916400 50(1½") x 32(1") 98916500 50(1½") x 40(1¼") 98917400 63(2") x 32(1") 98917500 63(2") x 40(1¼") 98917600 63(2") x 50(1½") End Connector models: 98922100 20(½") x ½" MI BSP 98922200 20(½") x ¾" MI BSP 98922300 20(½") x 1" MI BSP 98923100 25(¾") x ½" MI BSP 98923200 25(¾") x ¾" MI BSP 98923300 25(¾") x 1" MI BSP 98924200 32(1") x ¾" MI BSP 98924300 32(1") x 1" MI BSP 98924400 32(1") x 1¼" MI BSP 98924500 32(1") x 1½" MI BSP 98925300 40(1¼") x 1" MI BSP 98925400 40(1¼") x 1¼" MI BSP 98925500 40(1¼") x 1½" MI BSP 98925600 40(1¼") x 2" MI BSP 98926500 50(1½") x 1½" MI BSP 98926600 50(1½") x 2" MI BSP 98927500 63(2") x 1½" MI BSP 98927600 63(2") x 2" MI BSP 98982100 20(½") x ½" FI BSP 98982200 20(½") x ¾" FI BSP 98982300 20(½") x 1" FI BSP 98983100 25(¾") x ½" FI BSP 98983200 25(¾") x ¾" FI BSP 98983300 25(¾") x 1" FI BSP 98984200 32(1") x ¾" FI BSP 98984300 32(1") x 1" FI BSP 98984400 32(1") x 1¼" FI BSP 98985400 40(1¼") x 1¼" FI BSP 98985500 40(1¼") x 1½" FI BSP 98986500 50(1½") x 1½" FI BSP 98986600 50(1½") x 2" FI BSP 98987500 63(2") x 1½" FI BSP 98987600 63(2") x 2" FI BSP Tee models: 98932200 20(½") x 20(½") x 20(½") 98933300 25(¾") x 25(¾") x 25(¾") 98934400 32(1") x 32(1") x 32(1") 98935500 40(1¼") x 40(1¼") x 40(1¼") 98936600 50(1½") x 50(1½") x 50(1½") 98937700 63(2") x 63(2") x 63(2") 98942100 20(½") x 20(½") x ½" FI BSP 98942200 20(½") x 20(½") x ¾" FI BSP 98943100 25(¾") x 25(¾") x ½" FI BSP 98943200 25(¾") x 25(¾") x ¾" FI BSP 98943300 25(¾") x 25(¾") x 1" FI BSP 98944100 32(1") x 32(1") x ½" FI BSP 98944200 32(1") x 32(1") x ¾" FI BSP 98944300 32(1") x 32(1") x 1" FI BSP 98944400 32(1") x 32(1") x 1½" FI BSP 98945100 40(1¼") x 40(1¼") x ½" FI BSP 98945200 40(1¼") x 40(1¼") x ¾" FI BSP 98945400 40(1¼") x 40(1¼") x 1¼" FI BSP 98945500 40(1¼") x 40(1¼") x 1½" FI BSP 98946100 50(1½") x 50(1½") x ½" FI BSP 98946200 50(1½") x 50(1½") x ¾" FI BSP 98946500 50(1½") x 50(1½") x 1½" FI BSP 98946600 50(1½") x 50(1½") x 2" FI BSP 98947600 63(2") x 63(2") x 2" FI BSP 98993100 25(¾") x 25(¾") x ½" MI BSP 98993200 25(¾") x 25(¾") x ¾" MI BSP Reducing Tee models: 98933200 25(¾") x 25(¾") x 20(½") 98933400 25(¾") x 25(¾") x 32(1") 98934300 32(1") x 32(1") x 25(¾") 98935300 40(1¼") x 40(1¼") x 25(¾") 98935400 40(1¼") x 40(1¼") x 32(1") 98936300 50(1½") x 50(1½") x 25(¾") 98936400 50(1½") x 50(1½") x 32(1") 98936500 50(1½") x 50(1½") x 40(1¼") 98937300 63(2") x 63(2") x 25(¾") 98937400 63(2") x 63(2") x 32(1") 98937600 63(2") x 63(2") x 50(1½") Reducing Elbow models: 98952300 25(¾") x20(½")

Product Images

Approval Holder:

Philmac Pty Ltd

Company Name

Philmac Pty Ltd

Address

Diplocks Way, Hailsham, East Sussex

Postcode

BN27 3JF

Phone

+44 (0) 1323 847 323 Fax: 01323 844775

General Email

philmacorders@philmac.co.uk

View All Listings by this Company

Manufacturer:

Philmac Pty Ltd

Company Name

Philmac Pty Ltd

Address

Diplocks Way, Hailsham, East Sussex

Postcode

BN27 3JF

Phone

+44 (0) 1323 847 323 Fax: 01323 844775

General Email

philmacorders@philmac.co.uk

View All Listings by this Company

Range of ‘StrengThin™’ 100 System couplings and fittings for use with stainless steel pipe (manufactured to EN 10217-7). For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206013

Size:

Please refer to model.

Marking:

Victaulic logo, model, size and technical information on body.

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

StrengThin™ 100 System Couplings and Fittings comprising of models: No. E490, 90° Elbow: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E491, 45° Elbow: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E492, Tee: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E493, Reducing Tee: DN65 x DN65 x DN50; DN80 x DN80 x DN50, DN80 x DN80 x DN65, DN100 x DN100 x DN50 DN100 x DN100 x DN65, DN100 x DN100 x DN80, DN125 x DN125 x DN65, DN125 x DN125 x DN80, DN125 x DN125 x DN100, DN150 x DN150 x DN80, DN150 x DN150 x DN100, DN150 x DN150 x DN125, DN200 x DN200 x DN100, DN200 x DN200 x DN125, DN200 x DN200 x DN150; DN250 x DN250 x DN1250, DN250 x DN250 x DN150, DN250 x DN250 x DN200; DN300 x DN300 x DN150, DN250 x DN250 x DN200 & DN250 x DN250 x DN250. No. E494, & E494G Adaptor Nipple: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E495, Concentric Reducer: DN65xDN50, DN80xDN50, DN80xDN65, DN100xDN50, DN100xDN65, CN100xDN80, DN125xDN80, DN125xDN100, DN150xDN100, D150xDN125, DN200xDN125, DN200xDN150, DN250xDN150, DN250xDN200, DN300xDN200 & DN300xDN250. No. E496, End Cap: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. Style E497, Rigid Coupling: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E498, Flange Adaptor: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. Models added April 2024: Style E155 ‘StrengThin™’ 100 system Expansion Joint: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300

Product Images

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

Country

Belgium

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

Manufacturer:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

Country

Belgium

General Email

ed.mccarson@victaulic.com

View All Listings by this Company