Combination Tap Assemblies

Section Code 0510 : Two hole tap(s) with a single outlet and a fixed spout.

Back To Directory Sections

#2112041

Wall mounted, two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. To be used with rough set 13622180. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2112041
Size:
Spout - 1/2" BSP male, Cartridge - internal metric thread for connecting to rough set 13622180 which has a ½” BSP (F) inlet
Marking:
Hansgrohe on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2026
Model:
71256xxx Single lever basin mixer for concealed installation Fine wall-mounted with spout 20.5 cm. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2112332

Wall mounted, two-hole, single outlet (fixed) combination tap assembly with brass body (chrome plated), incorporating single sequential headwork with single lever operating member. The inlets incorporate a screwdriver operated servicing valve and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2112332
Size:
15mm compression
Marking:
Rada Safetherm on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2026
Model:
1.1704.001 Rada Safetherm Panel Mount
Product Images

Approval Holder:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

Print This Approval


#2112333

Deck mounted, two-hole, single outlet (fixed) concealed combination tap assembly with brass body (chrome plated), incorporating a single sequential headwork with single lever operating member. The inlets incorporate a screwdriver operated servicing valve and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2112333
Size:
15mm compression
Marking:
Rada Safetherm on operating member
Installation Requirements:
R001 R006 R010
Expiry date:
31/12/2026
Model:
1.1704.002 Rada Safetherm Basin Mount
Product Images

Approval Holder:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

Print This Approval


#2112348

Range of concealed two hole, single outlet (fixed) wall mounted tap assemblies, with a brass bodies and chrome plated trim set. Consisting of a rough in set 63397 and external trim 65088 and 65089. Incorproating a ceramic cartridge headworks and single lever operating members.The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2112348
Size:
½” BSP (F)
Marking:
Gessi on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2026
Model:
65088+63397 65089+63397
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#2107120

Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (chromium plated brass or stainless steel), comprising of a concealed rough in set with a brass body and a variety of separate trim sets incorporating a ceramic cartridge headwork with a dome type or single lever operating member and a spout outlet. The spout outlet incorporates a plastic aerator. The products are supplied with click type (click clack) waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2107120
Size:
½” BSP (F)
Marking:
C P HART on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2026
Model:
CPHF3600 (Rough in set) concealed body for wall mounted wash basin mixer, which must be installed with the following trim sets: Dome type operating member & 45° spout: ZCPHSP3051NX8G G pattern ZCPHSP3051NX8V V pattern ZCPHSP3051NX8X X pattern ZCPHSP3051X5G G pattern ZCPHSP3051X5V V pattern ZCPHSP3051X5X X pattern ZCPHSP3051NLX8G G pattern ZCPHSP3051NLX8V V pattern ZCPHSP3051NLX8X X pattern ZCPHSP3051LX5G G pattern ZCPHSP3051LX5V V pattern ZCPHSP3051LX5X X pattern Dome type operating member & 90° spout: CPHSP3051NX9 & ZCPHSP3051NX9 CPHSP3051NLX9 & ZCPHSP3051NLX9 CPHSP3051NSX9 & ZCPHSP3051NSX9 CPHSP3051NZX9 & ZCPHSP3051NZX9 CPHSP3081X5SS & ZCPHSP3081X5SS CPHSP3081LX5SS & ZCPHSP3081LX5SS CPHSP3081NLX9SS & ZCPHSP3081NLX9SS Single lever operating member & 45° spout: CPHSP3051X5 & ZCPHSP3051X5 CPHSP3051LX5 & ZCPHSP3051LX5 CPHSP3081LX5SS & ZCPHSP3081LX5SS CPHSP3051NX8 & ZCPHSP3051NX8 CPHSP3051NLX8 & ZCPHSP3051NLX8 CPHSP3081NX8SS & ZCPHSP3081NX8SS CPHSP3081NLX8SS & ZCPHSP3081NLX8SS Single lever operating member & 90° spout: CPHSP3051NX9 & ZCPHSP3051NX9 CPHSP3051NLX9 & ZCPHSP3051NLX9 CPHSP3051NSX9 & ZCPHSP3051NSX9 CPHSP3051NZX9 & ZCPHSP3051NZX9 CPHSP3081X5SS & ZCPHSP3081X5SS CPHSP3081LX5SS & ZCPHSP3081LX5SS CPHSP3081NLX9SS & ZCPHSP3081NLX9SS Single lever operating member & spout: CPHMA3141LX5 & ZCPHMA3141LX5 CPHMA3141X5 & ZCPHMA3141X5 CPHMA3141NLX8 & ZCPHMA3141NLX8 CPHMA3141NX8 & ZCPHMA3141NX8

Approval Holder:
C.P.Hart
Company Name
C.P.Hart
Address
Unit 40 Charles Park Claire Causeways Crossways Business Park Dartford
Postcode
DA2 6QA
Country
United Kingdom
General Email
roy.davis@cphart.co.uk

View All Listings by this Company

Print This Approval


#2109380

Range of two hole, single outlet (fixed) combination tap assemblies (chrome plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlets incorporate either a plastic flow straightener or aerator depending on model. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2109380
Size:
¾” BSP (M)
Marking:
Lecico on rear of tap body.
Installation Requirements:
R001 R005 R010
Expiry date:
30/09/2026
Model:
TPASHBAFILL2 - ASHBY DECK BATH FILLER COMBINATION TAP ASSEMBLIES (optional flow straightener or aerator)

Approval Holder:
LECICO
Company Name
LECICO
Address
2 D VIKING INDUSTRIAL ESTATE HUDSON ROAD BEDFORD
Postcode
MK410QB

View All Listings by this Company

Print This Approval


#2201005

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies with (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2201005
Size:
½” BSP (F) inlets (A1313NU- core valve unit)
Marking:
BD244AA CERAPLAN model: Ideal standard on operating member. All other models: Ideal standard on trim set.
Installation Requirements:
R001 R010 R040
Expiry date:
31/01/2027
Model:
Concealed core valve unit ‘A1313NU Kit 1’ for use with following exposed parts: SL Basin Mixers BIN – Kit 2 A7372XX CONCA SL, A7378XX JOY SL, A7380XX JOY SL. XX denotes the finish and can be replaced with: AA: Chrome, A2: Brushed Gold, GN: Silver Storm, A5: Magnetic Grey. BD244AA CERAPLAN (Chrome).
Product Images

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
Country
United Kingdom
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2201012

Range of two-hole, single outlet, fixed combination tap assemblies (chrome plated brass), incorporating a single sequential cartridge headwork with a dome type operating member. The spout outlet is connected to the flow control valve via a stainless steel braided PEX lined flexible hose assembly. The spout inlet incorporates a plastic flow regulator, and the spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2201012
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating ⅜” captive nut end connections.
Marking:
Dornbracht on spout
Installation Requirements:
R001 R006 R007 R009 R010
Expiry date:
31/01/2027
Model:
29217811, 29218811.
Product Images

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0

View All Listings by this Company
Manufacturer:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0

View All Listings by this Company

Print This Approval


#2201901

Range of two-hole, single outlet fixed combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2201901
Size:
¾” BSP (M)
Marking:
Bristan on mixer body
Installation Requirements:
R001 R006 R010
Expiry date:
31/01/2027
Model:
CLI BF C & NR BF C
Product Images

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#2108809

Range of two hole, single outlet, (fixed) combination tap assemblies (chromium plated brass), incorporates a quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. . Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2108809
Size:
¾” BSP (M)
Marking:
TP ON REAR OF TAP BODY
Installation Requirements:
R001 R009 R010
Expiry date:
31/08/2026
Model:
604588 LOWTHER BATH FILLER COMBINATION TAP ASSEMBLIES

Approval Holder:
Travis Perkins PLC
Company Name
Travis Perkins PLC
Address
Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#2207902

Wall mounted, concealed, two-hole, single outlet fixed combination tap assembly (chrome plated brass) body incorporating a ceramic cartridge head work with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2207902
Size:
15mm Compression
Marking:
Bristan on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2027
Model:
CLR WMBAS C

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#2207901

Wall mounted, concealed two-hole, single outlet fixed combination tap assembly (chrome plated brass) body incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2207901
Size:
15mm Compression
Marking:
Bristan on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2027
Model:
CLR WMBF C

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#2109801

Range of two hole, single outlet, (fixed) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2109801
Size:
¾” BSP (M)
Marking:
IFLO on body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2026
Model:
724740 Iflo Garda bath filler & 724769 Iflo Reno bath filler COMBINATION TAP ASSEMBLIES

Approval Holder:
The Highbourne Group, City Plumbing Supplies
Company Name
The Highbourne Group, City Plumbing Supplies
Address
Branch Support Centre Highbourne House Highbourne House Crick Northampton
Postcode
NN6 7SL
Country
United Kingdom
Phone
07342 078865
General Email
Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Print This Approval


#2108806

Range of two hole, single outlet, (fixed) combination tap assemblies (chromium plated brass), With a quarter turn ceramic disc headwork with single lever operating members. Models M4306, M4306E & M4306F incorporate a non rising spindle headwork with dome type operating members. Model M4306G incorporate a non rising spindle headwork with cross top operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. . Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2108806
Size:
¾” BSP (M)
Marking:
IFLO on body.
Installation Requirements:
R001 R009 R010
Expiry date:
31/08/2026
Model:
604588 Iflo CP Barcelona bath filler COMBINATION TAP ASSEMBLIES

Approval Holder:
The Highbourne Group, City Plumbing Supplies
Company Name
The Highbourne Group, City Plumbing Supplies
Address
Branch Support Centre Highbourne House Highbourne House Crick Northampton
Postcode
NN6 7SL
Country
United Kingdom
Phone
07342 078865
General Email
Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Print This Approval


#2204028

Range of two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with cubed or dome operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2204028
Size:
¾” BSP (M)
Marking:
RAK ceramics on base of body
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2027
Model:
RAKPES3004C RAKPER3004C
Product Images

Approval Holder:
RAK Ceramics UK Ltd
Company Name
RAK Ceramics UK Ltd
Address
Bradford House Frenchmans Road Petersfield Hampshire
Postcode
GU32 3AW
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2204041

Wall mounted two-hole, metal, single outlet, fixed combination tap assembly (chromium plated brass), with a quarter turn ceramic disc headwork controlling the flow with a dome operating member. The temperature is controlled independently via a thermostatic cartridge with a dome operating member incorporating a manual override button. The spout incorporates a plastic flow straightener. Both inlets incorporate stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure 5.0 bar. Maximum operating temperature 60° C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2204041
Size:
½” BSP (M) x ¾” BSP (M) offset union
Marking:
MARINER made in Italy on body
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2027
Model:
1363
Product Images

Approval Holder:
Mariner Rubinetterie Srl
Company Name
Mariner Rubinetterie Srl
Address
Strada Statale, 33 del Sempione, 28883 Gravellona Toce (VB)
Country
Italy
Phone
+39 0323-865049
General Email
info@mariner.it

View All Listings by this Company
Manufacturer:
Mariner Rubinetterie Srl
Company Name
Mariner Rubinetterie Srl
Address
Strada Statale, 33 del Sempione, 28883 Gravellona Toce (VB)
Country
Italy
Phone
+39 0323-865049
General Email
info@mariner.it

View All Listings by this Company

Print This Approval


#2204072

Range of two-hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener (TR1027 and TR1005 models) or a plastic aerator (all other models). The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2204072
Size:
¾” BSP (M)
Marking:
R2 (Brand of Rhoper Rhodes) on rear of tap body
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2027
Model:
TR1019/ERGO MOUNTED BATH FILLER (Chrome plated). TR1023/FUSE DECK MOUNTED BATH FILLER (Chrome plated). TR1027/CREW DECK MOUNTED BATH FILLER (Chrome plated). TR1005/JOY DECK MOUNTED BATH FILLER (Chrome plated). Models added Sept 2022: TR1092/ERGO MOUNTED BATH FILLER (Black finish). TR1104/ERGO DECK MOUNTED BATH FILLER (Brass effect finish). TR1098/FUSE MOUNTED BATH FILLER (Black finish). TR1110/FUSE DECK MOUNTED BATH FILLER (Brass effect finish). Models added January 2025: TR1138/CREW BATH FILLER (Brass effect finish). TR1131/CREW BATH FILLER (Gunmetal effect finish).
Product Images

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Country
United Kingdom
General Email
paulw@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2204079

Deck mounted two-hole, single outlet, fixed combination tap assembly (brass body, various finishes - see model), incorporating ¼ turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal back nuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2204079
Size:
¾” BSP (M)
Marking:
Hansgrohe on front base of tap.
Installation Requirements:
R001 R005 R010
Expiry date:
30/04/2027
Model:
71442 XXX. Model added July 2024: 74 423 XX0. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2208900

Two hole, single outlet fixed combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporate a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2208900
Size:
3/4" BSP (M)
Marking:
Bristan on plinth
Installation Requirements:
R001 R006 R010
Expiry date:
30/08/2027
Model:
DUL BF C

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#2204909

Range of two-hole, single outlet fixed combination tap assemblies (chromium plated or matte black finish brass bodies) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporates a plastic flow straighteners. The products are supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2204909
Size:
3/4" BSP (M)
Marking:
Bristan on tap body
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2027
Model:
MI BF C & MI BF BLK

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 5 of 18

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.