'EVER-SRC-1'. Factory applied, grey coloured Sulphate Resistant cement. Mix cement and sand in a 2:1 mass ratio. Apply as per manufacturer's instruction sheet '2024-09-10', revision 'A0'. Steam cure for 8 hours@50°C. For use with water up to 65°C.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2207550

Expiry date:

31/07/2027

Approval Holder:

Yingkou Economic and Technologic Development Zone Ever Foundry Co., Ltd.

Company Name

Yingkou Economic and Technologic Development Zone Ever Foundry Co., Ltd.

Address

Hongqi Industrial Park of Hongqi Town, Bayuquan Zone, Yingkou City, Liaoning Province

Country

China

View All Listings by this Company

'Enviroline 2405'. Site applied, off-white coloured (once mixed and applied), two-component epoxy. Mix parts A (light grey, opaque liquid) and B (white, opaque liquid) in a volume ratio of 2:1 and apply as per manufacturer's TDS 'Ref:10139', 'Issue Date:8/21/2017'. Cure for 7 days@25°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

240855046

Expiry date:

31/08/2029

Approval Holder:

Akzo Nobel Saudi Arabia Ltd.

Company Name

Akzo Nobel Saudi Arabia Ltd.

Country

Saudi Arabia

View All Listings by this Company

'UW TPE HEA-ISO (manufactured from NAKAN HEA 407 EX)'. White coloured (translucent), extruded TPE hose. Shore hardness 66. Tested in-radius size 0.39mm. For use with water up to 65°C.

Section:

5140 Hoses & Tubing

Expiry date:

30/11/2029

Approval Holder:

Uniwell Rohrsysteme GmbH & Co. KG

Company Name

Uniwell Rohrsysteme GmbH & Co. KG

Address

Siegelfelderstrasse 1 Ebern

Postcode

96106

Country

Germany

Phone

+49 9531 9229 0

General Email

simone.mueller@uniwell.de

View All Listings by this Company

'HW Lubrex/009'. Amber coloured (translucent) lubricant. Apply as per manufacturer's instructions. For use with water up to 65°C.

Section:

5160 Lubricants

Expiry date:

30/09/2029

Approval Holder:

Holdwell Components Private Ltd.

Company Name

Holdwell Components Private Ltd.

Address

Plot No. 64-A, Sector-C, Urla Industrial Area, Raipur, Chhattisgarh

Postcode

492003

Country

India

View All Listings by this Company

'ForTii Ace WX51-FC NA99001'. Natural (appears beige in colour), injection moulded Polyamide material. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250355006

Expiry date:

31/03/2030

Approval Holder:

Envalior

Company Name

Envalior

Address

Flughafenstrasse 101, 40474 Dusseldorf

Country

Germany

View All Listings by this Company

'Durethan BKV 15 F 901510 DUS018'. Black coloured, injection moulded PA6 GF 15 material. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250255008

Expiry date:

28/02/2030

Approval Holder:

Envalior

Company Name

Envalior

Address

Flughafenstrasse 101, 40474 Dusseldorf

Country

Germany

View All Listings by this Company

'Draka Comteq Cable Sheath: R607581 and R698927. Black coloured, extruded polyethylene cable sheath. For use with water up to 85°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

2302573

Expiry date:

29/02/2028

Approval Holder:

Draka Comteq Germany GmbH & Co. KG

Company Name

Draka Comteq Germany GmbH & Co. KG

Address

Wohlauer Str. 15, 90475 Nürnberg

Country

Germany

Phone

+49 (0)911 83370

View All Listings by this Company

'DQ25G295H05 Water (Drain) Cap'. Cream coloured, injection moulded PPE drain cap component. For use with water up to 75°C.

Section:

5253 Polyphenylene Ether (PPE)

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240955063

Expiry date:

30/09/2029

'3950, 3952 & 3955'. White coloured PTFE tapes manufactured by press strip roller. For use with water up to 60°C.

Section:

5294 Polytetrafluoroethylene (PTFE)

Section Subtitle:

Components.

WRAS Approval Number:

2110562

Expiry date:

31/10/2026

Approval Holder:

Genebre, S.A

Company Name

Genebre, S.A

Address

Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat

Postcode

08908

Country

Spain

Phone

(+34) 93 298 80 00

General Email

cazorla@genebre.es

View All Listings by this Company

'N-PU.95R'. Red coloured, injection moulded PUR material. For use with water up to 23°C.

Section:

5297 Polyurethane

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250155011

Expiry date:

31/01/2030

Approval Holder:

T.I.S. Nuoval Srl.

Company Name

T.I.S. Nuoval Srl.

Address

Via Broletti 20, Castlenuovo 38050

Country

Italy

View All Listings by this Company