Directory Search Results

Print List

#2108814

A7255AA range of PEX lined shower hoses incorporating corrugated interlocking metal hoses with various finishes. All hoses incorporate EPDM washers. Maximum operating temperature 65°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2108814
Note:
Open outlet use only.
Size:
½” captive nut end connections
Marking:
UWILL, WRAS, Year of manufacture (YYYY)
Installation Requirements:
R001
Expiry date:
31/08/2026
Model:
A7255AA – Ideal Standard Shower Hose End connector size for all models is G1/2 XX means the different outer finish ,XX=01,02,03,04,05,06: 01=CP chrom plating 02=EA electropolishing 03=Brushed nickel plating 04=ORB 05=matte black 06= Natural Brass

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
Country
United Kingdom
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company
Manufacturer:
Xiamen Uwill Sanitary Ware Co., Ltd.
Company Name
Xiamen Uwill Sanitary Ware Co., Ltd.
Address
3rd Floor, #82 Building Middle of Guankou Road Jimei District Xiamen Fujian
Country
China
General Email

View All Listings by this Company
Manufacturer:
Xiamen Uwill Sanitary Ware Co., Ltd.
Company Name
Xiamen Uwill Sanitary Ware Co., Ltd.
Address
3rd Floor, #82 Building Middle of Guankou Road Jimei District Xiamen Fujian
Country
China
General Email

View All Listings by this Company

Print This Approval


#2110161

Range of electrolytic water conditioners, with a brass body and zinc alloy anodes. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Size:
See model.
Marking:
Advanced Hydro Ltd, WRAS, model number and flow arrow on adhesive label on body.
Installation Requirements:
R001 R120 R170
Expiry date:
31/10/2026
Model:
ACP 15: ½” BSP (F) thread. ACP 20: ¾” BSP (F) thread. ACP 25: 1” BSP (F) thread. ACP 32: 1¼” BSP (F) thread. ACP 40: 1½” BSP (F) thread. ACP 50: 2” BSP (F) thread. ACP 65: PN16 2½” (65mm) Flat Face Flange. ACP 80: PN16 3” (80mm) Flat Face Flange. ACP 100: PN16 4” (100mm) Flat Face Flange. Models added July 2022: Advanced Crystallisation Process ACP125: 125mm Flat face Flange. Advanced Crystallisation Process ACP150: 150mm Flat face Flange.

Approval Holder:
Advanced Hydro Ltd
Company Name
Advanced Hydro Ltd
Address
Cherry Tree House Blind Lane Challock Kent
Postcode
TN25 4AU
Phone
01233 427057 or 07812 994586
General Email
alan.lester@advancedhyd.com

View All Listings by this Company

Print This Approval


#2111543

'P193'. Extruded, multi-layered pipe comprising of an off-white (translucent), PEX-Xc inner layer, aluminium middle layer and white coloured (opaque), PE-Xb outer layer. For use with water up to 85°C.

Section:
5240 Polyethylene
Section Subtitle:
Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:
2111543
Expiry date:
30/11/2026

Approval Holder:
ICMA S.p.A
Company Name
ICMA S.p.A
Address
Via Garavaglia, 4, 20012 Cuggiono, Milan
Country
Italy

View All Listings by this Company

Print This Approval


#2107596

'ABS011 ABS Pipe Cement'. Clear, transparent (un-pigmented) solvent cement, (intended to join PVC pipe and fittings). Apply as per manufacturer's instructions 'Rev00 26112025'. Cure for 20 days at 7°C. For use with water up to 65°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5560 Solvent Cements
Expiry date:
31/07/2026

Approval Holder:
Bisson Ltd.
Company Name
Bisson Ltd.
Address
Unit A, Rockhaven, Packgate Road, Avonmouth, Bristol
Postcode
BS11 0FD

View All Listings by this Company

Print This Approval


#2104088

WC dual flush drop valve comprising of a plastic body and silicone seating washer. The valves are operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2104088
Size:
2” BSP (M)
Marking:
Model and UNITOP logo (‘Unitop’, where the ‘o’ is a water droplet) on valve body.
Installation Requirements:
R001 R571
Expiry date:
30/04/2026
Model:
A31-04

Approval Holder:
Ellsi Limited
Company Name
Ellsi Limited
Postcode
DN15 8SL
Country
United Kingdom
General Email
martin@ellsi.co.uk

View All Listings by this Company
Manufacturer:
Xiamen Unitop Plumbing Technology Co Ltd
Company Name
Xiamen Unitop Plumbing Technology Co Ltd
Address
No. 1 Building No. 469 Jinyuan West Road Xinglin
Country
Jimei District
Phone
+86 592 6379968
General Email

View All Listings by this Company
Manufacturer:
Xiamen Unitop Plumbing Technology Co Ltd
Company Name
Xiamen Unitop Plumbing Technology Co Ltd
Address
No. 1 Building No. 469 Jinyuan West Road Xinglin
Country
Jimei District
Phone
+86 592 6379968
General Email

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 358 of 640

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.