Directory Search Results

Print List

#250512006

Range of EPDM or PVC lined, interlocked stainless-steel shower hoses. Open outlet use only. Hoses with an EPDM liner have a maximum operating temperature of 85°C. Hoses with an PVC liner have a maximum operating temperature of 65°C.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
250512006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F) captive nut end connections
Marking:
NT (company logo), WRAS & date of manufacture (YYYY) on sleeve
Installation Requirements:
R001 R040
Expiry date:
31/05/2030
Model:
NT (stainless steel double lock)-X-ww-xx-yyy-zzz Where – X = inner hose: A – EPDM, B – PVC. ww = connector size: 01 = G½” Hexagon nut. xx = connector size: 01 = G½” Conical nut. yyy = hose bore: 140 = DN14, 160 = DN16. zzz = hose length: 50cm to 300cm.

Approval Holder:
Xiamen Nuote Sanitary Ware Co. Ltd.
Company Name
Xiamen Nuote Sanitary Ware Co. Ltd.
Address
no 563 TONLONG SECOND ROAD TORCH HI TECH ZONE
Postcode
CHINA
Country
XIAMEN

View All Listings by this Company

Print This Approval


#2301375

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2301375
Size:
DN8 with end connections: M10, M12, F3/8”, F1/2”, 14.7mm & 15mm. DN10 with end connections: M10, M12, F3/8”, F1/2”, F3/4”, 14.7mm, 15mm & 22mm. DN13 with end connections: F1/2”, F3/4”, 14.7mm, 15mm & 22mm.
Marking:
Aqua Pro, WRAS & year of manufacture YYYY on ferrule
Installation Requirements:
R001
Expiry date:
31/01/2028
Model:
APSS5360 SS FLEXIBLE PIPE 1/2" X 1/2" X 60CM APSS5345 SS FLEXIBLE PIPE 1/2" X 1/2" X 45CM APSS5330 SS FLEXIBLE PIPE 1/2" X 1/2" X 30CM APSS5390 SS FLEXIBLE PIPE 1/2" X 1/2" X 90CM APSS3860 SS FLEXIBLE PIPE 3/8" X 3/8" X 60CM APSS3845 SS FLEXIBLE PIPE 3/8" X 3/8" X 45CM APSS3830 SS FLEXIBLE PIPE 3/8" X 3/8" X 30CM APSS123860 SS FLEXIBLE PIPE 1/2" X 3/8" X 60CM APSS123845 SS FLEXIBLE PIPE 1/2" X 3/8" X 45CM

Approval Holder:
Ultimate Trading Co(L.L.C.)
Company Name
Ultimate Trading Co(L.L.C.)
Address
No 2 Street 13D Nakheei Road, Deira Dubai
Country
U.A.E

View All Listings by this Company

Print This Approval


#250602048

Range of stainless steel braided EPDM lined flexible hose assemblies with EPDM seals & EPDM washers, available with a variety of end connections. For use with copper pipe manufactured to EN1057 & HEP20 PB pipe. Maximum working pressure; 6 Bar Maximum operating temperature; 65°c

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
250602048
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See Models below. PF = Pushfit
Marking:
On cap: Wavin, Hep20. Collor: BS7291, Size, and KEYLESS. On ferule: DOM (YYYY) GCE and WRAS
Installation Requirements:
R001
Expiry date:
30/06/2030
Model:
3093476 KL425A-15 15mm PF X ½ BSP (F) 3093488 KL125A-15 15mm PF X ½ BSP (F) 3093567 KL125B-15 15mm PF X 3/4 BSP (F) 3093484 KL125C-22 22mm PF X ¾ BSP (F) 3093477 KL125B-22 22mm PF X ¾ BSP (F) 3093487 KL225A-15 15mm PF X ½ BSP (F) 3093478 KL225B-15 15mm PF X 3/4 BSP (F) 3093515 KL225C-22 22mm PF X ¾ BSP (F) 3093512 KL225B-22 22mm PF X ¾ BSP (F) 3093493 KL325A-15 15mm PF X ½ BSP (F) 3093583 KL325B-22 22mm PF X ¾ BSP (F) 3093586 KL125H-15 15mm PF 3093579 KL125H-22 22mm PF 3093601 KL225H-15 15mm PF 3093518 KL225H-22 22mm PF 3093593 KL125D-15 15mm PF X ½ BSP (F) 3093501 KL125F-15 15mm PF M10 threaded 3093496 KL125G-15 15mm PF M12 threaded

Manufacturer:
Wavin Ltd.
Company Name
Wavin Ltd.
Address
Edlington Lane, Edlington Doncaster
Postcode
DN12 1BY
Country
United Kingdom
Phone
01709 856300

View All Listings by this Company

Print This Approval


#2305361

Range of vertical cased and insulated direct and indirect unvented stainless steel hot water storage cylinders. Fitted with a Caleffi 309463 GLD temperature and pressure relief valve sat at 6 bar & 90°C, and supplied with an inlet control group consisting of in-line pressure reducing valve (Caleffi set at 3 bar) and pressure relief valve (Caleffi CWIC200055) set at 4.5 bar, and incorporates a stainless-steel mesh and an approved check valve cartridge (verified by test suitable for backflow protection against Fluid Category 2), expansion vessel and filling loop. Maximum working pressure 4.4 bar. Maximum operating temperature 99°C.

Section:
1890 Unvented Heating Apparatus
Size:
28mm compression.
Marking:
Ideal Heating, Manufacturers name, address, date of manufacturer, capacity, model no, serial no, pressure and technical information on adhesive label on body.
Installation Requirements:
R001 R140 R360 R511 R530
Expiry date:
31/05/2028
Model:
IDEPLUHP150DUOPPSZSL & IDEPLUHP180DUOPPSZSL. 475mm diameter 150, 180, litre; single coil cylinders on top of a buffer cylinder for coupling with a range of heat pumps 5kW to 14kW; Pre-plumbed and pre-wired; single zone

Approval Holder:
Ideal Boilers Ltd
Company Name
Ideal Boilers Ltd
Address
PO Box 103 National Avenue Hull East Yorkshire
Postcode
HU5 4JN
Country
United Kingdom
Phone
07775659359
General Email
ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company

Print This Approval


#250488006

Range of wall mounted thermostatic bar shower mixers incorporating a non-rising spindle headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge that incorporates a manual override button. Both using either dome, cubed or single lever type operating members. The inlets incorporate stainless steel strainer washers and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower hose, handset and riser rail assembly. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250488006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” x ½” Offset unions.
Marking:
Aqualisa on all components
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2030
Model:
300BAR 590HP TWBAR1.21 300LBAR

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 347 of 451

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.