'Enviroline 2405'. Site applied, off-white coloured (once mixed and applied), two-component epoxy. Mix parts A (light grey, opaque liquid) and B (white, opaque liquid) in a volume ratio of 2:1 and apply as per manufacturer's TDS 'Ref:10139', 'Issue Date:8/21/2017'. Cure for 7 days@25°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

240855046

Expiry date:

31/08/2029

Approval Holder:

Akzo Nobel Saudi Arabia Ltd.

Company Name

Akzo Nobel Saudi Arabia Ltd.

Country

Saudi Arabia

View All Listings by this Company

'HW Lubrex/009'. Amber coloured (translucent) lubricant. Apply as per manufacturer's instructions. For use with water up to 65°C.

Section:

5160 Lubricants

Expiry date:

30/09/2029

Approval Holder:

Holdwell Components Private Ltd.

Company Name

Holdwell Components Private Ltd.

Address

Plot No. 64-A, Sector-C, Urla Industrial Area, Raipur, Chhattisgarh

Postcode

492003

Country

India

View All Listings by this Company

'ForTii Ace WX51-FC NA99001'. Natural (appears beige in colour), injection moulded Polyamide material. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250355006

Expiry date:

31/03/2030

Approval Holder:

Envalior

Company Name

Envalior

Address

Flughafenstrasse 101, 40474 Dusseldorf

Country

Germany

View All Listings by this Company

'Durethan BKV 15 F 901510 DUS018'. Black coloured, injection moulded PA6 GF 15 material. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250255008

Expiry date:

28/02/2030

Approval Holder:

Envalior

Company Name

Envalior

Address

Flughafenstrasse 101, 40474 Dusseldorf

Country

Germany

View All Listings by this Company

'DQ25G295H05 Water (Drain) Cap'. Cream coloured, injection moulded PPE drain cap component. For use with water up to 75°C.

Section:

5253 Polyphenylene Ether (PPE)

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240955063

Expiry date:

30/09/2029

'3950, 3952 & 3955'. White coloured PTFE tapes manufactured by press strip roller. For use with water up to 60°C.

Section:

5294 Polytetrafluoroethylene (PTFE)

Section Subtitle:

Components.

WRAS Approval Number:

2110562

Expiry date:

31/10/2026

Approval Holder:

Genebre, S.A

Company Name

Genebre, S.A

Address

Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat

Postcode

08908

Country

Spain

Phone

(+34) 93 298 80 00

General Email

cazorla@genebre.es

View All Listings by this Company

'ME0940/40 - 90'. Black coloured, injection moulded EPDM rubber material. Shore hardness between 40 & 90. Tested in-radii sizes between 1.0mm & 3.0mm. For use with water up to 85°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250155008

Expiry date:

31/01/2030

Approval Holder:

Elastotech s.r.l.

Company Name

Elastotech s.r.l.

Address

Via Provinciale, 92/94, 24060 Castelli Calepio (BG)

Country

Italy

Phone

0039 - 035 - 4496000

View All Listings by this Company

'OLD ETP890 70N'. Black coloured, injection moulded EPDM rubber. Shore hardness 70. Tested in-radius size 1.11mm. For use with water up to 85°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250455005

Expiry date:

30/04/2030

Approval Holder:

Oldrati Guarnizioni Industriali Spa

Company Name

Oldrati Guarnizioni Industriali Spa

Address

Via Quarenghi 2, 24060 Villongo (Bergamo)

Country

Italy

Phone

+39 035 939213 Fax: +39 035 939613

View All Listings by this Company

'SU26F415H01 'O' ring'. Black coloured, compression moulded FKM rubber 'O' ring. Shore hardness 80. Tested in-radius size 0.9mm. For use with water up to 75°C.

Section:

5370 Rubbers

Section Subtitle:

Fluoroelastomers - components.

WRAS Approval Number:

241055061

Expiry date:

31/10/2029

Approval Holder:

Mitsubishi Electric Air Conditioning Systems Europe Ltd.

Company Name

Mitsubishi Electric Air Conditioning Systems Europe Ltd.

Address

Nettlehill Road, Houston Industrial Estate, Livingston, Scotland

Postcode

EH54 5EQ

Phone

01506 - 44 55 00

General Email

mark.fletcher@m-ace.mee.com

View All Listings by this Company

'Tangit Rapid'. Straw coloured adhesive intended to join pipe and fittings. Apply as per manufacturer’s instructions ‘TFU_TM_GB_0915’. Cure for 24 hours@23°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5440 Sealants - Flat Faced Joints

Section Subtitle:

General.

WRAS Approval Number:

241255005

Expiry date:

31/12/2029

Approval Holder:

Henkel AG & Co. KGaA

Company Name

Henkel AG & Co. KGaA

Address

40191 Dusseldorf

Country

Germany

View All Listings by this Company