Range of hot pressed moulded GRP sectional cold water storage cisterns. Larger cisterns are fitted with PVC roof supports and are supplied with stainless steel ladders, tie rods, braces and hatches. Cold water use only.

Section:

0135 Cisterns

Section Subtitle:

Cold-water storage with cover or roof - plastic, sectional. Cisterns in this section are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.

WRAS Approval Number:

260102703

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

NON-POTABLE USE ONLY.

Size:

1000 litres 430,000 litres.

Marking:

Mitsubishi chemical infratec, Hishitank, capacity, model, size, serial number on label on body.

Installation Requirements:

R001 R270 R280

Expiry date:

31/01/2031

Model:

GE & GSE Hishitank.

Approval Holder:

Mitsubishi Chemical Infratec Co., Ltd.

Company Name

Mitsubishi Chemical Infratec Co., Ltd.

Address

1-1, Marunouchi 1-Chome, Chiyoda-ku, Tokyo 100-8251

Country

Japan

Phone

+81-80-2683-2994

General Email

yusuke.nakao.ma@mcgc.com

View All Listings by this Company

Dudley Turbo Edge dual flush syphonic flushing apparatus with Polypropylene body and stainless steel link for use with WC flushing cisterns and WC suites.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

251001702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” Outlet, Adjustable syphon height 7½” to 9½”.

Marking:

Dudley Turbo Edge on cap.

Installation Requirements:

R001 R556

Expiry date:

31/10/2030

Model:

Dudley Turbo Edge Adjustable Syphon.

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Bidet seat assembly which discharges via a sensor actuated solenoid valve and utilises a ‘Type AD’ air gap arrangement (verified by test -suitable for backflow prevention against Fluid Category 5). The inlet incorporates a strainer and flow regulator and is pumped from an internal water storage cistern via a heating unit to various outlet nozzle arrangements. Maximum working pressure 10 bar. Cold water supply only.

Section:

0278 Bidets and associated fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

TOTO printed on seat body. TOTO & product info on label on rear of seat.

Installation Requirements:

R001 R574

Expiry date:

31/01/2031

Model:

Neorest EW 2.0 – TCF994RWGE

Approval Holder:

TOTO Europe GmbH

Company Name

TOTO Europe GmbH

Address

Zollhof 2 40211 Düsseldorf Germany

Phone

+49 211 273080

View All Listings by this Company

Range of bottom entry BS1212-4 (2016) delayed or non delayed action type float operated valves for WC flushing cisterns. Maximum working pressure 10.0 Bar, cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

251202705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

FLUME on float. BS1212-4 only body.

Installation Requirements:

R001 R550 R560

Expiry date:

31/12/2030

Model:

AB769 Bottom entry inlet valve with G1/2” plastic thread AB769 Bottom entry inlet valve with G1/2” brass thread

Approval Holder:

Toolstation Ltd.

Company Name

Toolstation Ltd.

Address

Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of side entry BS1212-4 (2016), delayed action or non-delayed action type float operated valves for WC flushing cisterns. The inlet incorporates an optional flow restrictor. Maximum working pressure 10.0 Bar Maximum operating temperature Cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

251102003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Model can be supplied with either a brass or plastic ½” connection, a plastic 3/8” connection and either delayed or non-delayed action type float valve.

Size:

3/8” BSP (M) 1/2” BSP (M) (brass or plastic inlet connection)

Marking:

FLUME on float. BS1212-4 on body

Installation Requirements:

R001 R550

Expiry date:

30/11/2030

Model:

AB772

Approval Holder:

Toolstation Ltd.

Company Name

Toolstation Ltd.

Address

Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company