Directory Search Results

Print List

#241002067

Range of wall mounted thermostatic blending shower valves (brass bodies – various finishes) incorporating quarter turn ceramic disc two-way diverter headwork controlling the flow with dome or square type operating members. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button with dome or square type operating members. The inlets incorporate a stainless-steel strainer and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure; 5 Bar Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002067
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression
Marking:
Lanbiao on body
Installation Requirements:
R001 R040
Expiry date:
31/10/2029
Model:
F3091K F3092K Where xx denotes the finish and can be replaced with any of the following: No Suffix = Chrome H = Black DYB = Matte white BZ = Perl white painted HGTS = Red bronze HTL = Yellow bronze brushed Q = Bronze QTSL = Bronze brushed bright QTS = Bronze brushed matte STS = Acid copper brushed SDMGJ = Water plated rose gold N = Nickel brushed bright light NP = Nickel brushed TJ = Titanium gold TJLS = Titanium gold brushed G = Gold GJS = Gold brushed GJSY = Zirconium gold wire drawing matte PGJFY = Zirconium gold wire drawing matte bright light PLSJ = Brushed gold LSJY = Brushed gold matte MGJ = Rose gold MGJL = Rose gold brushed DMGJ = Light rose gold brushed HTS = Red bronze brushed QHP = Grey LSQH = Grey brushed LHMGJ = Brushed yellow rose gold
Product Images

Manufacturer:
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Company Name
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Address
Xudou Villiage Qinggang Yuhuan Zhejiang
Postcode
317606
Country
China
Phone
18957382651

View All Listings by this Company

Print This Approval


#241004024

Range of wall mounted concealed electronically controlled thermostatic shower mixers, incorporating plastic solenoid valves to control the flow to various outlets activated via a remote actuator. The temperature is controlled via two transducers housed within the concealed box. The products incorporate approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure: 6.0 bar. Maximum operating temperature: 65°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241004024
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The products are not supplied with shower hoses, handsets, riser rails or overhead shower outlets
Size:
½” BSP (M)
Marking:
Sedal
Installation Requirements:
R001 R009 R010 R040
Expiry date:
31/10/2029
Model:
CPU iSCU2 TH 20 CPU iSCU2 TH 30 CPU iSCU2 TH 40

Approval Holder:
Sedal S.A
Company Name
Sedal S.A
Address
AV Barcelona 264 08750 Molins De Rei Barcelona
Country
Spain

View All Listings by this Company

Print This Approval


#241002020

Range of two-way manual diverter valves with shut-off position. Products are for insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
2050 Diverter
Section Subtitle:
Diverter cartridge(s) with manual adjustment.
WRAS Approval Number:
241002020
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
26mm O.D.
Marking:
HG on body
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
30079500 & 30650210
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#241002007

Range of regulating and shut-off valves with brass bodies and EPDM ‘O’-Rings. Maximum working pressure 16.0 Bar for BSP (M) and 25.0 bar for BSP (F). Maximum operating temperature 85.0°C

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
241002007
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Male thread DN15 – DN 50 Female thread DN15 – DN50
Marking:
Oventrop logo, flow arrow, PN and DN on body. Oventrop, product name and DN on face plate.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
HydroControl V Double regulating valve, female thread 1062404 - DN15 1062406 - DN20 1062408 - DN25 1062410 - DN32 1062412 - DN40 1062416 - DN50 HydroControl V Double regulating valve, male thread 1062604 - DN15 1062606 - DN20 1062608 - DN25 1062610 - DN32 1062612 - DN40 1062616 - DN50 HydroControl A Shutoff valve, female thread, 1067524 - DN15 1067526 - DN20 1067528 - DN25 1067530 - DN32 1067532 - DN40 1067536 - DN50 HydroControl A Shutoff valve, male thread, 1067624 - DN15 1067626 - DN20 1067628 - DN25 1067630 - DN32 1067632 - DN40 1067636 - DN50 HydroControl M Double regulating valve with metering station, female thread 1065844 - DN15 ULF 1065834 - DN15 LF 1065824 - DN15 MF 1065804 - DN15 1065806 - DN20 1065808 - DN25 1065810 - DN32 1065812 - DN40 1065816 - DN50
Product Images

Manufacturer:
Oventrop GmbH & Co KG
Company Name
Oventrop GmbH & Co KG
Address
Paul-Oventrop-Strasse 1, 59939 Olsberg
Country
Germany

View All Listings by this Company

Print This Approval


#240902714

Range of swing gate, non-return valves with (blue or red epoxy powder coated) ductile iron bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2185 Valves
Section Subtitle:
Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should not be made to `Backflow Prevention Devices`.
WRAS Approval Number:
240902714
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN50 – 300 flanged
Marking:
Rapidrop, PN, DN, date of manufacture (YYYY), flow arrow and technical information data plate on body.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
FIG 302

Approval Holder:
Rapidrop Global Limited
Company Name
Rapidrop Global Limited
Address
Rutland Business Park Newark Road Peterborough
Postcode
PE1 5WA
Country
United Kingdom
Phone
01733 847543
General Email
craig.galloway@rapidrop.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 323 of 437

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.