‘Art. 040 Full Face Flange’. Black coloured, hot injection moulded HDPE flange fitting. For use with water up to 23°C.
'PPE HY3140GYellow' & 'PPE HY3140GBlack'. Yellow or black coloured, injection moulded PPE materials. For use with water up to 85°C.
'PSX 34 Epoxy adhesive'. Site applied, two-part Epoxy adhesive/sealant comprising of a black coloured paste and grey coloured paste, supplied as a pre-weighed kit. Mix, apply and cure as per manufacturer’s TDS ‘ADH4710ENG_PotableWater Feb 2026’. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'PSX 60 Epoxy adhesive'. Site applied, two-part Epoxy adhesive/sealant comprising of a black coloured paste and grey-white coloured paste, supplied as a pre-weighed kit. Mix, apply and cure (refer to Minimum Joint Cure Time) as per manufacturer’s TDS ‘ADH4720ENG_PotableWater Feb 2026’. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Weld-On 747 PVC Cement'. Blue coloured solvent cement. Apply as per manufacturer's PDS '747-05-2025'. Cure for 4 hours@5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Weld-On 795 Clear PVC Cement'. Clear solvent cement. Apply as per manufacturer's PDS '795-05-2025'. Cure for 4 hours@5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Weld-On® 795™ Blue PVC Cement'. Blue coloured solvent cement. Apply as per manufacturer's Product Data Sheet '795-05-2025'. Cure for 4 hours@5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Weld-On ® 319 PVC Cement'. Clear solvent cement. Apply as per manufacturer's Product Data Sheet '319-05-2025'. Cure for 4 hours@5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Weld-On® 779™ ABS Solvent Cement'. Grey coloured solvent cement. Apply as per manufacturer's Product Data Sheet '779-05-2025'. Cure for 4 hours@5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
Range of BS1212-4 (2016) compact type float operated valves for WC flushing cisterns, with bottom entry. The inlet incorporates a plastic strainer. Maximum working pressure 10.0 Bar Cold Water Use Only
Range of side entry BS1212-4 (2016), delayed action or non-delayed action type float operated valves for WC flushing cisterns. The inlet incorporates an optional flow restrictor. Maximum working pressure 10.0 Bar Maximum operating temperature Cold water use only.
Side entry BS1212-4 (2016) compact type float operated valve with delayed action for WC flushing cisterns. The inlet incorporates a flow restrictor. Maximum working pressure 10.0 Bar Cold water use only.
Range of bottom entry BS1212-4 (2016) compact type float operated inlet valve for WC flushing cisterns, delayed fill with a plastic body and a plastic flow regulator at the inlet. Maximum working pressure 10.0 Bar Cold water use only
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| F9009K-** | Various | BSP 3/4" (M) | 10 bar | 85 °C | LAN BIAO | Spout | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | Interconnecting Hoses, |
** denotes finish: No Suffix = Chrome, H = Black, DYB = Matte white, BZ = Perl white painted, HGTS = Red bronze, HTL = Yellow bronze brushed, Q = Bronze, QTSL = Bronze brushed bright, QTS = Bronze brushed matte, STS = Acid copper brushed, SDMGJ = Water plated rose gold, N = Nickel brushed bright light, NP = Nickel brushed, TJ = Titanium gold, TJLS = Titanium gold brushed, G = Gold, GJS = Gold brushed, GJSY = Zirconium gold wire drawing matte, PGJFY = Zirconium gold wire drawing matte bright light, PLSJ = Brushed gold, LSJY = Brushed gold matte, MGJ = Rose gold, MGJL = Rose gold brushed, DMGJ = Light rose gold brushed, HTS = Red bronze brushed, QHP = Grey, LSQH = Grey brushed, LHMGJ = Brushed yellow rose gold.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| H23B1 | Chrome plated | ½” BSP (F) conical nut x ½” BSP(F) nut | Open outlet use only bar | 65 °C | JETOM, WRAS | Ferrule | No | ||||
| H23GF | Chrome plated | ½” BSP (F) conical nut x ½” BSP(F) conical nut | Open outlet use only bar | 65 °C | JETOM, WRAS | Ferrule | No |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| JD-744* ** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Handle | No | Not applicable | Not Applicable | Open Outlet | Flow Regulator Fitted, Shower Hose, Handset, |
| SJS-200* ** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Handle | No | Not applicable | Not Applicable | Open Outlet | Flow Regulator Fitted, Shower Hose, Handset, |
| JD-795* ** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Handle | No | Not applicable | Not Applicable | Open Outlet | Flow Regulator Fitted, Shower Hose, Handset, |
| JD-300* ** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Handle | No | Not applicable | Not Applicable | Open Outlet | Flow Regulator Fitted, Shower Hose, Handset, |
| JD-798* ** | Various | BSP 1/2" (M) | Open outlet use only bar | 60 °C | Kind | Handle | No | Not applicable | Not Applicable | Open Outlet | Flow Regulator Fitted, Shower Hose, Handset, |
The first * stands for the different handle A, B,C and D, if there is no handle, no first * ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 26.658.000 | Chrome | G 1/2" (M) | Open Outlet bar | 65 °C | Grohe | Body | No |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| GR-AZ-52 | chrome | 1/2 BSP | 10 bar | 75 °C | GUOREN | on body | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | |
| GR-AZ-53 | chrome | 1/2 BSP | 10 bar | 75 °C | GUOREN | on body | No | 1/4 Turn ceramic disk | Not Applicable | Not Applicable | |
| GR-AZ-51 | chrome | 1/2 BSP | 10 bar | 75 °C | GUOREN | on body | No | Ceramic cartridge | Not Applicable | Not Applicable | |
| GR-LY-10C | chrome | 3/4 BSP | 10 bar | 75 °C | GUOREN | on body | No | Ceramic cartridge | Not Applicable | Not Applicable |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S009* | Various | 1/2" BSP (M) | 10 bar | 65 °C | WINSDRUM | On body | No | Rotary Cartridge headwork | Not Applicable | Not Applicable | Shower Hose, Handset, Fixed Head, Riser Rail, |
| S011* | Various | 3/4" BSP (F) | 10 bar | 65 °C | WINSDRUM | On cover plate | No | Ceramic cartridge | Not Applicable | Not Applicable | Shower Hose, Handset, Fixed Head, |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| KL-35DS | natural | 35mm | 10 bar | 85 °C | Manufacturer’s logo, WRAS and YYYY/DD/MM | on body | No | Ceramic cartridge | |||
| KL-40DS | natural | 40mm | 10 bar | 85 °C | Manufacturer’s logo, WRAS and YYYY/DD/MM | on body | No | Ceramic cartridge |
Page 316 of 326
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
