Directory Search Results

Print List

#251055064

'CORZAN® 3236 GRY 211'. Grey coloured, injection moulded CPVC material. For use with water up to 23°C.

Section:
5306 Polyvinylchloride (PVC, PVC-U and CPVC)
Section Subtitle:
Material only.
WRAS Approval Number:
251055064
Expiry date:
31/10/2030

Approval Holder:
Acuriant Technologies, Inc.
Company Name
Acuriant Technologies, Inc.
Address
One Marina Park Drive, Suite 1410, Boston, MA 02210
Country
United States

View All Listings by this Company

Print This Approval


#251101701

BS EN 14055: 2018 concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve providing a Type AG air gap with a pneumatic or cable operated drop valve capable of full flush volumes of up to 6 litres and reduced flush of up to 4 litres. The cistern can be operated by manual push button / push plate, (not supplied). Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
251101701
Size:
½” BSP Inlet connection.
Marking:
Top of cistern lid marked ‘DUDLEY OSMO T1’. Top of Pneumatic drop valve is marked ‘Dudley’ Top of Cable Operated Drop Valve marked ‘Dudley’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
Installation Requirements:
R001 R280 R556 R581 R582
Expiry date:
30/11/2030
Model:
OSMO T1 Concealed Cistern (Category 3).

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2212367

Concealed WC dual flushing cistern with a side entry BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure – 10.0 bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212367
Size:
½” BSP (M).
Marking:
ABI logo inside on plate, 6L waterline within cistern.
Installation Requirements:
R001 R556 R571 R581
Expiry date:
31/12/2027
Model:
ABI In‐Wall Toilet Cistern

Approval Holder:
ABI Interiors International LTD
Company Name
ABI Interiors International LTD
Address
10 John Street London
Postcode
WC1N 2EB
Country
United Kingdom
Phone
02045 389222
General Email
robert.b@abiinteriors.com

View All Listings by this Company

Print This Approval


#251101702

BS EN 14055: 2018 concealed WC cistern incorporating a side entry compact type float operated inlet valve providing a Type AB air gap with a pneumatic or cable operated drop valve capable of full flush volumes of up to 6 litres and reduced flush of up to 4 litres. The cistern can be operated by manual push button / push plate, (not supplied). Maximum working pressure 10.0 bar. Cold water use only.

Section:
2034 Cistern - Flushing
Section Subtitle:
Incorporating Type AB air gap, providing fluid category 5 backflow protection. Suitable for use in a WC suite.
WRAS Approval Number:
251101702
Size:
½” BSP Inlet connection.
Marking:
Top of cistern lid marked ‘DUDLEY OSMO T1’. Top of Pneumatic drop valve is marked ‘Dudley’ Top of Cable Operated Drop Valve marked ‘Dudley’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
Installation Requirements:
R001 R280 R574
Expiry date:
30/11/2030
Model:
OSMO T1 Concealed Cistern (Category 5).

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#251004301

Section:
0690 Combination Tap Assemblies
Description:
A Range of Combined bath filler and overflow(s).
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R576
Expiry date:
31/10/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout OutletWastes Includes
58 130 xx0VariousG 1/2"open outlet bar65 °Chansgroheon faceplateYesNot applicableNot ApplicableOpen OutletClick Type
42 540 xx0VariousG 1/2"open outlet bar65 °CAXORon faceplateYesNot applicableNot ApplicableOpen OutletClick Type
58 119 xx0Variousbasic set 58152180open outlet bar65 °Chansgroheon faceplateYesNot applicableNot ApplicableOpen OutletClick Type
58 131 xx0VAriousbasic set 58152180open outlet bar65 °Chansgroheon faceplateYesNot applicableNot ApplicableOpen OutletClick Type
58 152 180NAG 1/2"open outlet bar65 °Chansgrohesticker only, marking will be on the finish setYesNot applicableNot ApplicableOpen Outlet

Notes & Further Information

model 58131xx0 and 58119xx0 are identical in the water pathway, only difference is the cover plate design. model 58130xx0 and 42540xx0 are both composed of the finish set 58131xx0/58119xx0 and basic set 58152180, only difference is the marking on the faceplate 58130xx0= hansgrohe, 42540xx0= AXOR


Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#251102305

Section:
0695 Combination Tap Assemblies
Description:
A Range of Spout outlet(s).
Wall mounted. Kit also includes operating lever and finishing fittings. Products must be used in conjunction with concealed core valve unit ‘A1313NU Kit 1’ (not included as part of this approval).
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
TVW105112111XXVarious½” BSP (F) inlets (A1313NU- core valve unit)10 bar60 °CVilleroy & BochOn the leverYesCeramic cartridgeAerator
TVW103112111XXVarious½” BSP (F) inlets (A1313NU- core valve unit)10 bar60 °CVilleroy & BochOn the leverYesCeramic cartridgeAerator
TVW125003001XXVarious½” BSP (F) inlets (A1313NU- core valve unit)10 bar60 °CVilleroy & BochOn the leverYesCeramic cartridgeAerator
TVW107008002XXVarious½” BSP (F) inlets (A1313NU- core valve unit)10 bar60 °CVilleroy & BochOn the leverYesCeramic cartridgeAerator
TVW107008003XXVarious½” BSP (F) inlets (A1313NU- core valve unit)10 bar60 °CVilleroy & BochOn the leverYesCeramic cartridgeAerator
TVZ106003001XXVarious½” BSP (F) inlets (A1313NU- core valve unit)10 bar60 °CVilleroy & BochOn the leverYesCeramic cartridgeAerator
TVW111002001XXVarious½” BSP (F) inlets (A1313NU- core valve unit)10 bar60 °CVilleroy & BochOn the leverYesCeramic cartridgeAerator
TVZ106010001XXVarious½” BSP (F) inlets (A1313NU- core valve unit)10 bar60 °CVilleroy & BochOn the leverYesCeramic cartridgeAerator
TVW112007001XXVarious½” BSP (F) inlets (A1313NU- core valve unit)10 bar60 °CVilleroy & BochOn the leverYesCeramic cartridgeAerator
TVW116001000XXVarious½” BSP (F) inlets (A1313NU- core valve unit)10 bar60 °CVilleroy & BochOn the leverYesCeramic cartridgeAerator

Notes & Further Information

XX at the end indicates the Finish of surfaces that are not in contact with water (61 - Chrome, K5 - Matt black, 76 - Brushed gold, 64 - Brushed nickel).


Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval


#260188301

Section:
2011 Shower Valves
Description:
A Shower valve(s) with thermostatic temperature control, incorporating a manual diverter between outlets.
Wall mounted. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge; however, the complete products have not been fully tested to demonstrate that they provide backflow protection.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2031

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
AQRNDCV2Chrome5 bar80 °CAQUALISAshower valveNoCeramic cartridgeNot ApplicableNot ApplicableShower Hose, Handset, Fixed Head,

Notes & Further Information

AQRNDCV2 Packed Products. Waterway contents are: SDCV.002 (Valve) 704418 (handset) ACY1008(hose) ACY1013(wall outlet) ACY1002(fixed arm) 704426(top shower)


Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#251215307

Section:
0440 Headworks
Description:
A Range of Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
Plastic body/bodies. Brass body/bodies.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001
Expiry date:
31/12/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
35A435mm25 bar65 °CHassem logoBodyNoCeramic cartridge
40A40mm25 bar65 °CHassem logoBodyNoCeramic cartridge
HSP-02418mm25 bar65 °CHS, Production date(YYYYMMDD)BodyNoPush button detent
QB-001LBSP 3/4" (M)25 bar65 °CHassem logoBodyNo1/4 Turn ceramic disc
QB-001RBSP 3/4" (M)25 bar65 °CHassem logoBodyNo1/4 Turn ceramic disc
HSD-A001LBSP 1/2" (M)25 bar65 °CHassem logoBodyNo1/4 Turn ceramic disc
HSD-A001RBSP 1/2" (M)25 bar65 °CHassem logoBodyNo1/4 Turn ceramic disc
HSE-N003LBSP 1/2" (M)25 bar65 °CHassem logoBodyNo1/4 Turn ceramic disc
HSE-N003RBSP 1/2" (M)25 bar65 °CHassem logoBodyNo1/4 Turn ceramic disc
QB-318BSP 3/4" (M)25 bar65 °CHassem logoBodyNo1/4 Turn ceramic disc
QD-445BSP 1/2" (M)25 bar65 °CHassem logoBodyNo1/4 Turn ceramic disc
QD-446BSP 1/2" (M)25 bar65 °CHassem logoBodyNo1/4 Turn ceramic disc

Approval Holder:
KAIPING HASSEM SANITARY WARE CO., LTD
Company Name
KAIPING HASSEM SANITARY WARE CO., LTD
Address
No. 68 West Longtang Road Shagang District Shuikou Town Kaiping Guangdong
Country
China

View All Listings by this Company
Manufacturers:
Kaiping Hassem Sanitary Ware Co., Ltd

Print This Approval


#251202301

Section:
0442 Thermostatic cartridges
Description:
A Range of Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001
Expiry date:
31/12/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
99078-H25mm Ø bar85 °C Aerre plast and date of manufacture (MM/YY)On bodyYesNot applicableNot ApplicableNot Applicable
99014-H32mm Ø bar85 °C Aerre plast and date of manufacture (MM/YY)On bodyYesNot applicableNot ApplicableNot Applicable
G22151-N34mm Ø bar85 °C Aerre plast and date of manufacture (MM/YY)On bodyYesNot applicableNot ApplicableNot Applicable
99150-H35mm Ø bar65 °C Aerre plast and date of manufacture (MM/YY)On bodyYesNot applicableNot ApplicableNot Applicable
99095-H28.5mm Ø bar85 °C Aerre plast and date of manufacture (MM/YY)On bodyYesNot applicableNot ApplicableNot Applicable
99090-H28.5mm Ø bar85 °C Aerre plast and date of manufacture (MM/YY)On bodyYesNot applicableNot ApplicableNot Applicable

Notes & Further Information

The cartridges 99078-H and 99014-H are re-approvals of certificate 2007006 (Expiry date: 31/07/2025) The cartridges G22151-N, 99150-H, 99095-H, 99090-H are on the same family and we would like to add to the same certificate.


Approval Holder:
Aerre Plast Srl
Company Name
Aerre Plast Srl
Address
Via Novara, 8 Casale Corte Cerro (VB)
Postcode
28881
Country
Italy
Phone
+39 0323 865360
General Email
info@aerreplast.it

View All Listings by this Company
Manufacturers:
Aerre Plast Srl

Print This Approval


#251102020

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes). Incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 Bar Maximum operating temperature 70°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
251102020
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Model 33500710 is supplied with a lever type waste set – not verified by test.
Size:
Stainless steel braided, PEX lined flexible hose assemblies incorporating 3/8" BSP (F) captive nut end connections.
Marking:
Dornbracht logo on front of body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/11/2030
Model:
33500710 33521710

Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 304 of 320

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.