Directory Search Results

Fittings Materials
Print List

#2312333

Range of two-hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerators. The product incorporates a manual diverter and is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
WRAS Approval Number:
2312333
Note:
This product is supplied with a hose and handset.
Size:
¾” BSP (M).
Marking:
Methven and DTC53 on body.
Installation Requirements:
R001 R006 R020
Expiry date:
31/12/2028
Model:
AMBSMCPUK - Amio Bath Shower Mixer, AMBSMBK - Amio Bath Shower Mixer Matte Black, ALBSMBK - Amio Bath Shower Mixer Matte Black, ALBSMCP - Albany Bath Shower Mixer.
Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval

#2010114

Range of wall mounted two-hole, single outlet (fixed) bath shower mixers with brass bodies (various finishes), incorporating a manual diverter controlling and diverting the flow between the spout outlet and an overhead shower. Temperature is controlled independently via a thermostatic cartridge with dome type operating member with manual override button. The spout outlets incorporate a plastic aerator. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
WRAS Approval Number:
2010114
Size:
3/4" BSP (M) x ½” BSP (M) Offset Unions.
Marking:
DELONG on body.
Installation Requirements:
R001 R020
Expiry date:
31/10/2025
Model:
136814299 135214299
Approval Holder:
Main Plan Limited
Company Name
Main Plan Limited
Address
9/F., Yau Lee Centre 45 Hoi Yuen Road Kwun Tong Kowloon
Country
Hong Kong

View All Listings by this Company

Print This Approval

#240104019

A range of wall mounted two-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes see models), incorporating ceramic cartridge headworks, single lever type operating members and self-cancelling diverter to shower outlets. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
240104019
Size:
3/4” BSP (M) x ½” BSP (M) offset union.
Marking:
Dornbrach etched on body.
Installation Requirements:
R001 R030
Expiry date:
31/01/2029
Model:
33200831-00 YAMOU bath mixer – Chrome, 33200831-69 YAMOU bath mixer – Black, 33200832-00 YARRE bath mixer – Chrome, 33200832-69 YARRE bath mixer – Black.
Product Images
Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval

#240102071

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes) incorporating ceramic cartridge headworks, with single lever operating members and a manually operated diverter to shower outlet. Model YH2520 incorporates a quarter turn ceramic disc headwork with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge incorporating a dome type operating member and a manual override button. The spout outlets incorporate a plastic aerator. The inlets incorporate a stainless-steel strainer and approved check valve cartridges; however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
240102071
Size:
½” BSP (M) x ¾” BSP (M) Offset unions.
Marking:
GAOAO logo on body
Installation Requirements:
R001 R010 R030
Expiry date:
31/01/2029
Model:
YA3264LT YA3264 YA3264YB(YA3260PC) YA3281 YH2520 Difference： Models of YA3264LT；YA3264；YA3264YB(YA3260PC) are different in surface. LT:Brushed Brass PVD YB/PC:Matte Black None:Chrome
Product Images
Approval Holder:
ZHEJIANG GAOAO SANITARY WARE CO.,LTD.
Company Name
ZHEJIANG GAOAO SANITARY WARE CO.,LTD.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province
Postcode
318020
Country
China
General Email
2900324142@qq.com

View All Listings by this Company

Print This Approval

#240102013

Two-hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headwork, controlling flow and temperature, with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with a stainless steel braided PEX lined flexible hose assembly for connection between the control valve and the spout. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
240102013
Size:
Stainless Steel braided PEX lined flexible hose assemblies with 3/8" BSP captive nut end connections.
Marking:
Dornbracht on rear of spout.
Installation Requirements:
R001 R006 R007 R009 R010
Expiry date:
31/01/2029
Model:
32815682 – MEM.
Product Images
Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval

#240102014

Range of two-hole, single outlet (swivel) combination tap assembly (brass body - various finishes), incorporating quarter turn ceramic disc headwork, with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with a stainless steel braided PEX lined flexible hose assembly for connection between the control valve and the spout. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
240102014
Size:
Stainless Steel braided PEX lined hose flexible hose assemblies with 3/8" BSP captive nut end connections.
Marking:
Dornbracht logo on spout.
Installation Requirements:
R001 R006 R007 R009 R010
Expiry date:
31/01/2029
Model:
32815861 – Meta Square, 32815875 – Tara Ultra, 32815888 – Tara.
Product Images
Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval

#240102004

Deck mounted, three-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating 1/4 turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator. The product is supplied with stainless steel braided PEX lined flexible hose assemblies for connection between the side valves and the spout. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240102004
Size:
1/2" BSP (M).
Marking:
Dornbracht on spout and operating member.
Installation Requirements:
R001 R006 R007 R010
Expiry date:
31/01/2029
Model:
20705782 - MEM.
Product Images
Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval

#240102020

Range of three-hole, single outlet (swivel) combination tap assemblies with (brass bodies -various finishes), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlets incorporate a plastic aerator. The product is supplied with a stainless steel braided PEX lined flexible hose assemblies for connection between the side valves and the spout. Maximum working pressure 10.0 Bar. Maximum operating temperature 70.0°C.

Section:
0660 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
240102020
Note:
The product is supplied with a lever type waste not verified by test.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
AXOR on body.
Installation Requirements:
R001 R006 R007 R009 R010
Expiry date:
31/01/2029
Model:
38 054 xx0 45 133 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval

#240102035

Floor mounted, spout outlet, (brass body- various finishes) incorporating a plastic flow straightener. Maximum working pressure 65.0 Bar

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlet(s).
WRAS Approval Number:
240102035
Note:
Open outlet use only
Size:
1/2" BSP (F) inlets on installation kit
Marking:
Samuel Heath logo, flow rate and ASME A112.18.1/CSA standard on faceplate. Samuel Heath logo on body of rough kit.
Installation Requirements:
R001 R010 R040
Expiry date:
31/01/2029
Model:
V141-SP-XX For_me Freestanding Bath Spout V141-IS-XX For_me Installation Kit V141-SP-XX:- Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, or URM = Urban Brass Matt Lacquered. V141-IS-XX:- Where the product code suffix ‘xx’ denotes the product is unfinished.
Product Images
Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval

#240402002

Range of spout outlets, (brass bodies - various finishes). Models PSH088 YY & PSH021 YY incorporate plastic flow straighteners, other models incorporate a plastic aerator. The products are supplied with metal back nuts. Maximum operating temperature 65.0°C

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlet(s).
WRAS Approval Number:
240402002
Note:
Open outlet use only.
Size:
3/4" BSP (M)
Marking:
Lefroy Brooks logo on body (PSH021) Lefroy Books logo on underside of spout (PSH088, PSH080 & PSH081)
Installation Requirements:
R001 R006
Expiry date:
30/04/2029
Model:
PSH088 YY PSH021 YY PSH080 YY PSH081 YY YY denotes the finish, which can be replaced by any of the following: CP = Polished Chrome, NK = Polished Nickel BC = Brushed Chrome BN = Brushed Nickel PB = Polished Brass BPB = Brushed Brass AB = Aged Brass TA = Taunton AG = Antique Gold HRG = Hard Rubbed Gold CM = Champagne Gold BCM = Brushed Champagne Gold CO = Copper MBC = Matt Black Chrome
Approval Holder:
Lefroy Brooks
Company Name
Lefroy Brooks
Address
Unit 3 Marston Industrial Estate Marston Road Wolverhampton
Postcode
WV2 4LX
Country
United Kingdom
Phone
01902 390 891
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval

#240102055

Wall mounted basin and bath spout outlets (brass bodies – various finishes). The spout outlet incorporates a plastic flow straightener or aerator. Maximum operating temperature 65.0°C

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlet(s).
WRAS Approval Number:
240102055
Note:
Open outlet use only
Size:
3/4” BSP (M) or ½” BSP (M) (see models)
Marking:
Lefroy brooks logo on body
Installation Requirements:
R001 R040
Expiry date:
31/01/2029
Model:
FR 2200 YY La Chapelle LB 2200 YY Classic MK 2200 YY Mackintosh JM 2200 YY Janey Mac FR 2210 YY La Chapelle FR E 2210 YY La Chapelle LB 2210 YY Classic LB E 2210 YY Classic MK 2210 YY Mackintosh JM 2210 YY Janey Mac JM E 2210 YY Janey Mac LB 1765 YY Projection arm LB E 1765 YY Projection arm TT 4125 YY Ten Ten TT 4135 YY Ten Ten Understanding the product codes: First letters – These represent the name of the trim set/style that the product is being placed with. Examples are: LB which represents 'Classic'. FR which represents ‘La Chapelle’ MK which represents ‘Mackintosh’ JM which represents ‘Janey Mac’ RT which represents ‘Belle Aire’ TT which represents ‘Ten Ten’ The ‘E’ as in the LB E 1765 YY model represents the word ‘European’. European models have G1/2 threads. The ‘E’ is used when a G3/4 thread model already exists, and the overseas market requires a G1/2 threaded version of the same model (Hence the LB 1765 YY has G3/4 thread & LB E 1765 YY models have G1/2 thread). Numbers – This is a numeric code that remains constant: 2200 & 4125 represent ‘bath’ spout 2210 & 4135 represent ‘basin’ spout 1765 represents ‘projection arm’ Last letters (e.g. YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the finish. Available surface finishes are, but not limited to: - CP - Polished Chrome - NK - Polished Nickel - BC - Brushed Chrome - BN - Brushed Nickel - PB - Polished Brass - BPB - Brushed Brass - AB - Aged Brass - TA - Taunton - AG - Antique Gold - HRG - Hard Rubbed Gold - CM - Champagne Gold - BCM - Brushed Champagne Gold - CO - Copper - MBC - Matt Black Chrome
Product Images
Approval Holder:
Lefroy Brooks
Company Name
Lefroy Brooks
Address
Unit 3 Marston Industrial Estate Marston Road Wolverhampton
Postcode
WV2 4LX
Country
United Kingdom
Phone
01902 390 891
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval

#240102707

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes - see model). Electronic controls on the left-hand side of the body allow the tap to dispense one or more of the following (model specification dependent): ambient, near boiling, chilled or sparkling water. The spout incorporates a plastic aerator on the Sparkling/Ambient/Chilled outlet, and a separate outlet for the near boiling water. All models incorporate a vent outlet within the tap spout for the near-boiling water circuit. Near-boiling circuit has a maximum operating temperature of 98°C. All other circuits have a maximum operating temperature of 65°C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlet(s).
WRAS Approval Number:
240102707
Note:
Open outlet use only. These taps are designed to only work with the Zip HydroTap Command Centres, (sold separately). R008 applies to the pushfit fittings and blue LLDPE tubing.
Size:
Sparkling/Ambient/Chilled inlet (model dependent): LLDPE pipe ¼”. Near boiling inlet: Silicone flexible pipe ID 7.7mm.
Marking:
Zip on operating member
Installation Requirements:
R001 R006 R008 R009 R160
Expiry date:
31/01/2029
Model:
95453xxx Arc Plus. 95454xxx Cube Plus. Where xxx denotes finish and can be replaced with: Z00 = CH Chrome, Z01 = BR Brushed Chrome, Z03 = FB Matt Black, Z05 = BRG Brushed Rose Gold, Z07 = BDG Brushed Gold, Z09 = BPT Gunmetal, Z11 = BNI Brushed Nickel. Each tap can be specified to dispense the following options: Near boiling and ambient. Near boiling, chilled and sparkling, Near boiling and chilled, Near boiling, Chilled and sparkling, Sparkling.
Product Images
Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Country
United Kingdom
Phone
0345 600 5005
General Email
sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Print This Approval

#2310919

Range of expansion vessels with stainless steel bodies and EPDM membranes. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:
1000 Expansion Vessels
Size:
See models.
Marking:
Varem, model, maximum temperature & maximum pressure on adhesive label on body.
Installation Requirements:
R001
Expiry date:
31/10/2028
Model:
US050 - Maxivarem LS Pressure tanks for water pump systems 50L vert. 1” BSP (M). US060 - Maxivarem LS Pressure tanks for water pump systems 60L vert. 1” BSP (M). US080 - Maxivarem LS Pressure tanks for water pump systems 80L vert. 1” BSP (M). US100 - Maxivarem LS Pressure tanks for water pump systems 100L vert. 1” BSP (M). US150 - Maxivarem LS Pressure tanks for water pump systems 150L vert. 1”1/2 BSP (M). US200 - Maxivarem LS Pressure tanks for water pump systems 200L vert. 1”1/2 BSP (M). US300 - Maxivarem LS Pressure tanks for water pump systems 300L vert. 1”1/2 BSP (M). US500 - Maxivarem LS Pressure tanks for water pump systems 500L vert. 1”1/2 BSP (M). US051 - Maxivarem LS Pressure tanks for water pump systems 50L hor. 1” BSP (M). US061 - Maxivarem LS Pressure tanks for water pump systems 60L hor. 1” BSP (M). US081 - Maxivarem LS Pressure tanks for water pump systems 80L hor. 1” BSP (M). US101 - Maxivarem LS Pressure tanks for water pump systems 100L hor. 1” BSP (M). US151 - Maxivarem LS Pressure tanks for water pump systems 150L hor. 1”1/2 BSP (M). US201 - Maxivarem LS Pressure tanks for water pump systems 200L hor. 1”1/2 BSP (M). US301 - Maxivarem LS Pressure tanks for water pump systems 300L hor. 1”1/2 BSP (M).
Product Images
Approval Holder:
Varem S.p.a
Company Name
Varem S.p.a
Address
Via Sabbioni, 2, 35024 Bovolenta (PD)
Country
Italy

View All Listings by this Company
Manufacturer:
Varem S.p.a
Company Name
Varem S.p.a
Address
Via Sabbioni, 2, 35024 Bovolenta (PD)
Country
Italy

View All Listings by this Company

Print This Approval

#2312914

Range of vertical and horizontal expansion vessels with EPDM membrane and stainless steel or galvanised steel connections. Maximum working pressures 10.0. Maximum operating temperature 85 °C.

Section:
1000 Expansion Vessels
Size:
¾” BSP (M) or 1” BSP (M).
Marking:
VAREM, year of production, model and further product information on adhesive label.
Installation Requirements:
R001 R535
Expiry date:
31/12/2028
Model:
Vertical models: S2005; S2008; S2012; S2019; S2020; E1024; S2025; S2040. Horizontal models: S2H19; S2H20.
Approval Holder:
Varem S.p.a
Company Name
Varem S.p.a
Address
Via Sabbioni, 2, 35024 Bovolenta (PD)
Country
Italy

View All Listings by this Company
Manufacturer:
Varem S.p.a
Company Name
Varem S.p.a
Address
Via Sabbioni, 2, 35024 Bovolenta (PD)
Country
Italy

View All Listings by this Company

Print This Approval

#240204702

Range of filling loop assemblies, incorporating a stainless steel braided EPDM lined flexible hose, brass bodied isolation valve and a DZR brass non-verifiable double check valve assembly that incorporates an isolation valve. Model FL12041510 has a lanyard and end caps. Maximum working pressure 10 bar. Maximum operating temperature 85°C

Section:
1015 Filling Loop
WRAS Approval Number:
240204702
Note:
To be used with copper pipe only to BS EN 1057
Size:
15mm Compression
Marking:
Intatec logo, flow arrow & CR on double check valve. Intatec logo, WRAS & year of manufacture (yyyy) on crimp connector
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
FL12041510 FL12041500 111341 111342 135202 120416.1 00107125
Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval

#240102705

Filter cartridge with plastic body. Maximum working pressure 8.0 bar. Cold water use only.

Section:
1055 Filter Cartridges
Size:
74mm OD 3.5 ISO Grohe thread.
Marking:
BWT, Grohe and flow arrow on body
Installation Requirements:
R001 R008 R120 R150 R170 R290
Expiry date:
31/01/2029
Model:
40691002 Grohe Blue Magnesium+Zinc
Product Images
Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval

#2312363

Geberit range of ‘FlowFit’ press Fittings for use with ‘Geberit FlowFit Pipe ML’ and ‘Geberit FlowFit Pipe coils ML’ (insulated and uninsulated) PERT/Al/PERT pipes. The fittings are made from PPSU or lead free silicon bronze. Operating parameters: 16.0 bar@cold water and 10.0 bar@70°C.

Section:
1100 Fittings and Pipe - Compatible Systems
Section Subtitle:
Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2312363
Size:
16mm – 75mm.
Marking:
Geberit & size on fittings. Geberit, size, model & material on pipes.
Installation Requirements:
R001
Expiry date:
31/12/2028
Model:
Geberit FlowFit Fittings for use with Geberit FlowFit Pipe ML and Geberit FlowFit Pipe coils ML (insulated and uninsulated) Fittings included on the approval: FlowFit coupling 620.010.00.1 PPSU, d=16mm 620.011.00.1 PPSU, d=20mm 620.012.00.1 PPSU, d=25mm 620.013.00.1 PPSU, d=32mm 620.014.00.1 PPSU, d=40mm 620.015.00.1 PPSU, d=50mm 620.016.00.1 PPSU, d=63mm 620.017.00.1 PPSU, d=75mm FlowFit long coupling 620.020.00.1 CuZn21Si3P, d=16mm 620.021.00.1 CuZn21Si3P, d=20mm 620.022.00.1 CuZn21Si3P, d=25mm 620.023.00.1 CuZn21Si3P, d=32mm 620.024.00.1 CuZn21Si3P, d=40mm 620.025.00.1 CuZn21Si3P, d=50mm FlowFit reducer 620.031.00.1 PPSU, d=20mm, d1=16mm 620.032.00.1 PPSU, d=25mm, d1=16mm 620.042.00.1 PPSU, d=25mm, d1=20mm 620.033.00.1 PPSU, d=32mm, d1=20mm 620.043.00.1 PPSU, d=32mm, d1=25mm 620.034.00.1 PPSU, d=40mm, d1=20mm 620.044.00.1 PPSU, d=40mm, d1=25mm 620.054.00.1 PPSU, d=40mm, d1=32mm 620.035.00.1 PPSU, d=50mm, d1=32mm 620.045.00.1 PPSU, d=50mm, d1=40mm 620.036.00.1 PPSU, d=63mm, d1=40mm 620.046.00.1 PPSU, d=63mm, d1=50mm 620.037.00.1 PPSU, d=75mm, d1=40mm 620.047.00.1 PPSU, d=75mm, d1=50mm 620.057.00.1 PPSU, d=75mm, d1=63mm FlowFit bend 620.062.00.1 45°, PPSU, d=25mm 620.063.00.1 45°, PPSU, d=32mm 620.064.00.1 45°, PPSU, d=40mm 620.065.00.1 45°, PPSU, d=50mm 620.066.00.1 45°, PPSU, d=63mm 620.067.00.1 45°, PPSU, d=75mm 620.070.00.1 90°, PPSU, d=16mm 620.071.00.1 90°, PPSU, d=20mm 620.072.00.1 90°, PPSU, d=25mm 620.073.00.1 90°, PPSU, d=32mm 620.074.00.1 90°, PPSU, d=40mm 620.075.00.1 90°, PPSU, d=50mm 620.076.00.1 90°, PPSU, d=63mm 620.077.00.1 90°, PPSU, d=75mm FlowFit T-piece, equal 620.080.00.1 PPSU, d=16mm 620.081.00.1 PPSU, d=20mm 620.082.00.1 PPSU, d=25mm 620.083.00.1 PPSU, d=32mm 620.084.00.1 PPSU, d=40mm 620.085.00.1 PPSU, d=50mm 620.086.00.1 PPSU, d=63mm 620.087.00.1 PPSU, d=75mm FlowFit T-piece, reduced 620.111.00.1 PPSU, d=20mm, d1=16mm, d2=20mm 620.101.00.1 PPSU, d=20mm, d1=16mm, d2=16mm 620.121.00.1 PPSU, d=16mm, d1=20mm, d2=16mm 620.102.00.1 PPSU, d=25mm, d1=20mm, d2=20mm 620.131.00.1 PPSU, d=20mm, d1=20mm, d2=16mm 620.103.00.1 PPSU, d=32mm, d1=25mm, d2=25mm 620.104.00.1 PPSU, d=40mm, d1=20mm, d2=40mm 620.105.00.1 PPSU, d=50mm, d1=40mm, d2=40mm 620.106.00.1 PPSU, d=63mm, d1=25mm, d2=63mm 620.107.00.1 PPSU, d=75mm, d1=25mm, d2=75mm 620.112.00.1 PPSU, d=25mm, d1=16mm, d2=25mm 620.113.00.1 PPSU, d=32mm, d1=16mm, d2=32mm 620.114.00.1 PPSU, d=40mm, d1=25mm, d2=40mm 620.115.00.1 PPSU, d=50mm, d1=25mm, d2=50mm 620.116.00.1 PPSU, d=63mm, d1=32mm, d2=63mm 620.117.00.1 PPSU, d=75mm, d1=32mm, d2=75mm 620.122.00.1 PPSU, d=25mm, d1=20mm, d2=25mm 620.123.00.1 PPSU, d=32mm, d1=20mm, d2=25mm 620.124.00.1 PPSU, d=40mm, d1=32mm, d2=40mm 620.125.00.1 PPSU, d=50mm, d1=32mm, d2=50mm 620.126.00.1 PPSU, d=63mm, d1=40mm, d2=63mm 620.127.00.1 PPSU, d=75mm, d1=40mm, d2=75mm 620.132.00.1 PPSU, d=20mm, d1=25mm, d2=20mm 620.133.00.1 PPSU, d=32mm, d1=20mm, d2=32mm 620.135.00.1 PPSU, d=50mm, d1=40mm, d2=50mm 620.136.00.1 PPSU, d=63mm, d1=50mm, d2=63mm 620.137.00.1 PPSU, d=75mm, d1=50mm, d2=75mm 620.142.00.1 PPSU, d=25mm, d1=25mm, d2=20mm 620.143.00.1 PPSU, d=32mm, d1=25mm, d2=32mm 620.147.00.1 PPSU, d=75mm, d1=63mm, d2=75mm FlowFit T-piece with female thread 620.150.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=16mm 620.151.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm 620.157.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=20mm 620.152.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=25mm 620.162.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4", d1=25mm 620.153.00.1 CuSn4Zn2PS, d=32mm, Rp=1/2", d1=32mm 620.163.00.1 CuSn4Zn2PS, d=32mm, Rp=3/4", d1=32mm 620.173.00.1 CuSn4Zn2PS, d=32mm, Rp=1", d1=32mm 620.154.00.1 CuSn4Zn2PS, d=40mm, Rp=1/2", d1=40mm 620.164.00.1 CuSn4Zn2PS, d=40mm, Rp=3/4", d1=40mm 620.174.00.1 CuSn4Zn2PS, d=40mm, Rp=1", d1=40mm 620.184.00.1 CuSn4Zn2PS, d=40mm, Rp=1 1/4", d1=40mm 620.155.00.1 CuSn4Zn2PS, d=50mm, Rp=1/2", d1=50mm 620.165.00.1 CuSn4Zn2PS, d=50mm, Rp=3/4", d1=50mm 620.175.00.1 CuSn4Zn2PS, d=50mm, Rp=1", d1=50mm 620.185.00.1 CuSn4Zn2PS, d=50mm, Rp=1 1/2", d1=50mm 620.156.00.1 CuSn4Zn2PS, d=63mm, Rp=1/2", d1=63mm 620.166.00.1 CuSn4Zn2PS, d=63mm, Rp=1", d1=63mm 620.176.00.1 CuSn4Zn2PS, d=63mm, Rp=2", d1=63mm 620.177.00.1 CuSn4Zn2PS, d=75mm, Rp=1", d1=75mm FlowFit adapter to Geberit Mepla: 620.090.00.1 CuZn21Si3P, d=16mm, d1=16mm 620.091.00.1 CuZn21Si3P, d=20mm, d1=20mm 620.092.00.1 CuZn21Si3P, d=25mm, d1=26mm 620.093.00.1 CuZn21Si3P, d=32mm, d1=32mm 620.094.00.1 CuZn21Si3P, d=40mm, d1=40mm 620.095.00.1 CuZn21Si3P, d=50mm, d1=50mm 620.096.00.1 CuZn21Si3P, d=63mm, d1=63mm 620.097.00.1 CuZn21Si3P, d=75mm, d1=75mm FlowFit adapter to Geberit Mapress, with plain end 620.230.00.1 CuSn4Zn2PS, d=16mm, d1=12mm 620.240.00.1 CuSn4Zn2PS, d=16mm, d1=15mm 620.231.00.1 CuSn4Zn2PS, d=20mm, d1=15mm 620.241.00.1 CuSn4Zn2PS, d=20mm, d1=18mm 620.242.00.1 CuSn4Zn2PS, d=20mm, d1=22mm 620.232.00.1 CuSn4Zn2PS, d=25mm, d1=22mm 620.233.00.1 CuSn4Zn2PS, d=32mm, d1=28mm 620.234.00.1 CuSn4Zn2PS, d=40mm, d1=35mm 620.235.00.1 CuSn4Zn2PS, d=50mm, d1=42mm 620.236.00.1 CuSn4Zn2PS, d=63mm, d1=54mm 620.250.00.1 X5CrNiMo17-12-2, d=16mm, d1=15mm 620.251.00.1 X5CrNiMo17-12-2, d=20mm, d1=18mm 620.252.00.1 X5CrNiMo17-12-2, d=20mm, d1=22mm 620.253.00.1 X5CrNiMo17-12-2, d=25mm, d1=22mm 620.254.00.1 X5CrNiMo17-12-2, d=32mm, d1=28mm 620.255.00.1 X5CrNiMo17-12-2, d=40mm, d1=35mm 620.256.00.1 X5CrNiMo17-12-2, d=50mm, d1=42mm 620.257.00.1 X5CrNiMo17-12-2, d=63mm, d1=54mm FlowFit adapter to Geberit Mapress, with pressing socket 620.329.00.1 X5CrNiMo17-12-2, d=16mm, d1=12mm 620.332.00.1 X5CrNiMo17-12-2, d=16mm, d1=15mm 620.347.00.1 X5CrNiMo17-12-2, d=20mm, d1=15mm 620.333.00.1 X5CrNiMo17-12-2, d=20mm, d1=18mm 620.334.00.1 X5CrNiMo17-12-2, d=20mm, d1=22mm 620.335.00.1 X5CrNiMo17-12-2, d=25mm, d1=22mm 620.336.00.1 X5CrNiMo17-12-2, d=32mm, d1=28mm 620.337.00.1 X5CrNiMo17-12-2, d=40mm, d1=35mm 620.338.00.1 X5CrNiMo17-12-2, d=50mm, d1=42mm 620.339.00.1 X5CrNiMo17-12-2, d=63mm, d1=54mm FlowFit adapter with male thread 620.300.00.1 CuZn21Si3P, d=16mm, R=3/8" 620.301.00.1 CuZn21Si3P, d=20mm, R=3/8" 620.302.00.1 CuZn21Si3P, d=25mm, R=1/2" 620.303.00.1 CuZn21Si3P, d=32mm, R=1" 620.304.00.1 CuZn21Si3P, d=40mm, R=1" 620.305.00.1 CuZn21Si3P, d=50mm, R=1 1/2" 620.306.00.1 CuZn21Si3P, d=63mm, R=2" 620.307.00.1 CuZn21Si3P, d=75mm, R=2 1/2" 620.310.00.1 CuZn21Si3P, d=16mm, R=1/2" 620.311.00.1 CuZn21Si3P, d=20mm, R=1/2" 620.312.00.1 CuZn21Si3P, d=25mm, R=3/4" 620.313.00.1 CuZn21Si3P, d=32mm, R=1 1/4" 620.314.00.1 CuZn21Si3P, d=40mm, R=1 1/4" 620.315.00.1 CuZn21Si3P, d=50mm, R=2" 620.316.00.1 CuZn21Si3P, d=63mm, R=2 1/2" 620.320.00.1 CuZn21Si3P, d=16mm, R=3/4" 620.321.00.1 CuZn21Si3P, d=20mm, R=3/4" 620.322.00.1 CuZn21Si3P, d=25mm, R=1" 620.324.00.1 CuZn21Si3P, d=40mm, R=1 1/2" 619.700.00.1 X5CrNiMo17-12-2, d=20mm, R=1/2" 619.701.00.1 X5CrNiMo17-12-2, d=25mm, R=3/4" 619.702.00.1 X5CrNiMo17-12-2, d=32mm, R=1" 619.703.00.1 X5CrNiMo17-12-2, d=40mm, R=1 1/4" 619.704.00.1 X5CrNiMo17-12-2, d=50mm, R=1 1/2" 619.705.00.1 X5CrNiMo17-12-2, d=63mm, R=2" 619.706.00.1 X5CrNiMo17-12-4, d=75mm, R=2 1/2" FlowFit adapter with female thread: 620.400.00.1 CuZn21Si3P, d=16mm, Rp=3/8" 620.410.00.1 CuZn21Si3P, d=16mm, Rp=1/2" 620.420.00.1 CuZn21Si3P, d=16mm, Rp=3/4" 620.401.00.1 CuZn21Si3P, d=20mm, Rp=3/8" 620.411.00.1 CuZn21Si3P, d=20mm, Rp=1/2" 620.421.00.1 CuZn21Si3P, d=20mm, Rp=3/4" 620.402.00.1 CuZn21Si3P, d=25mm, Rp=3/4" 620.412.00.1 CuZn21Si3P, d=25mm, Rp=1" 620.403.00.1 CuZn21Si3P, d=32mm, Rp=1" 620.413.00.1 CuZn21Si3P, d=32mm, Rp=1 1/4" 620.404.00.1 CuZn21Si3P, d=40mm, Rp=1" 620.414.00.1 CuZn21Si3P, d=40mm, Rp=1 1/4" 620.424.00.1 CuZn21Si3P, d=40mm, Rp=1 1/2" 620.405.00.1 CuZn21Si3P, d=50mm, Rp=1 1/2" 620.415.00.1 CuZn21Si3P, d=50mm, Rp=2" 620.406.00.1 CuZn21Si3P, d=63mm, Rp=2" 620.416.00.1 CuZn21Si3P, d=63mm, Rp=2 1/2" 620.407.00.1 CuZn21Si3P, d=75mm, Rp=2 1/2" FlowFit bend adapter 90° with male thread 620.510.00.1 CuSn4Zn2PS, d=16mm, R=1/2" 620.520.00.1 CuSn4Zn2PS, d=16mm, R=3/4" 620.511.00.1 CuSn4Zn2PS, d=20mm, R=1/2" 620.521.00.1 CuSn4Zn2PS, d=20mm, R=3/4" 620.502.00.1 CuSn4Zn2PS, d=25mm, R=3/4" 620.512.00.1 CuSn4Zn2PS, d=25mm, R=1" 620.503.00.1 CuSn4Zn2PS, d=32mm, R=1" 620.504.00.1 CuSn4Zn2PS, d=40mm, R=1 1/4" 620.505.00.1 CuSn4Zn2PS, d=50mm, R=1 1/2" 620.506.00.1 CuSn4Zn2PS, d=63mm, R=2" FlowFit 90° bend adapter with male thread, long: 620.522.00.1 CuSn4Zn2PS, d=16mm, R=1/2" 620.523.00.1 CuSn4Zn2PS, d=16mm, R=3/4" 620.524.00.1 CuSn4Zn2PS, d=20mm, R=1/2" 620.525.00.1 CuSn4Zn2PS, d=20mm, R=3/4" 620.526.00.1 CuSn4Zn2PS, d=25mm, R=3/4" 620.527.00.1 CuSn4Zn2PS, d=25mm, R=1" 620.528.00.1 CuSn4Zn2PS, d=32mm, R=1" FlowFit bend adapter 90° with female thread 620.532.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4" 620.533.00.1 CuSn4Zn2PS, d=32mm, Rp=1" 620.534.00.1 CuSn4Zn2PS, d=40mm, Rp=1 1/4" 620.535.00.1 CuSn4Zn2PS, d=50mm, Rp=1 1/2" 620.536.00.1 CuSn4Zn2PS, d=63mm, Rp=2" 620.540.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.541.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" 620.542.00.1 CuSn4Zn2PS, d=25mm, Rp=1" 620.550.00.1 CuSn4Zn2PS, d=16mm, Rp=3/4" 620.551.00.1 CuSn4Zn2PS, d=20mm, Rp=3/4" FlowFit adapter with MasterFix 620.290.00.1 PPSU, d=16mm, RpMF=1/2" 620.291.00.1 PPSU, d=20mm, RpMF=1/2" FlowFit elbow adapter 90° with MasterFix: 620.490.00.1 PPSU, d=16mm, RpMF=1/2" 620.491.00.1 PPSU, d=20mm, RpMF=1/2" FlowFit T-piece adapter with MasterFix, through-flow 620.380.00.1 PPSU, d=16mm, RpMF=1/2", d1=16mm 620.381.00.1 PPSU, d=20mm, RpMF=1/2", d1=16mm 620.391.00.1 PPSU, d=20mm, RpMF=1/2", d1=20mm 620.382.00.1 PPSU, d=25mm, RpMF=1/2", d1=20mm 620.392.00.1 PPSU, d=25mm, RpMF=1/2", d1=25mm 620.780.00.1 PPSU, d=16mm, d1=16mm, RpMF1=1/2" 620.781.00.1 PPSU, d=20mm, d1=20mm, RpMF1=1/2" FlowFit adapter to Compact 620.560.00.1 CuZn21Si3P, d=16mm, di=21mm 620.561.00.1 CuZn21Si3P, d=20mm, di=21mm 620.562.00.1 CuZn21Si3P, d=25mm, di=21mm FlowFit screw connection 620.570.00.1 CuZn21Si3P, d=16mm 620.571.00.1 CuZn21Si3P, d=20mm 620.572.00.1 CuZn21Si3P, d=25mm 620.573.00.1 CuZn21Si3P, d=32mm 620.574.00.1 CuZn21Si3P, d=40mm 620.575.00.1 CuZn21Si3P, d=50mm 620.576.00.1 CuZn21Si3P, d=63mm FlowFit adapter union with clamping ring 620.680.00.1 CuZn21Si3P, d=16mm, d1=12mm 620.690.00.1 CuZn21Si3P, d=16mm, d1=15mm 620.681.00.1 CuZn21Si3P, d=20mm, d1=15mm FlowFit elbow adapter 90° with clamping ring union 620.700.00.1 CuSn4Zn2PS, d=16mm, d1=12mm 620.710.00.1 CuSn4Zn2PS, d=16mm, d1=15mm 620.701.00.1 CuSn4Zn2PS, d=20mm, d1=15mm 620.720.00.1 CuZn21Si3P / Cu, d=16mm, d1=15mm 620.721.00.1 CuZn21Si3P / Cu, d=20mm, d1=15mm 620.722.00.1 CuZn21Si3P / Cu, d=25mm, d1=22mm FlowFit adapter with screw connection to PEX pipes: 620.730.00.1 CuZn21Si3P, d=16mm, d1=16mm, PN=6bar 620.731.00.1 CuZn21Si3P, d=20mm, d1=20mm, PN=6bar 620.732.00.1 CuZn21Si3P, d=25mm, d1=25mm, PN=6bar FlowFit pipe end plug 620.740.00.1 CuZn21Si3P, d=16mm 620.741.00.1 CuZn21Si3P, d=20mm 620.742.00.1 CuZn21Si3P, d=25mm FlowFit tap connector box 90° with MasterFix 650.681.00.3 CC499K, d=16mm, Rp=1/2" 651.681.00.3 CC499K, d=20mm, Rp=1/2" 652.682.00.3 CC499K, d=20mm, Rp=3/4" Tap connector box 90° for MasterFix 650.687.00.3 CC499K, Rp=1/2" 650.688.00.3 CC499K, Rp=3/4" FlowFit double tap connector box 90° with MasterFix 650.683.00.3 CC499K, d=16mm, Rp=1/2", d1=16mm 652.685.00.3 CC499K, d=20mm, Rp=1/2", d1=16mm Double tap connector box 90° for MasterFix 650.689.00.3 CC499K, Rp=1/2" FlowFit tap connector box 90° with MasterFix, premounted 650.791.00.3 CC499K, d=16mm, Rp=1/2", AD=15.3cm 651.791.00.3 CC499K, d=20mm, Rp=1/2", AD=15.3cm 650.792.00.3 CC499K, Rp=1/2", RMF=1/2", AD=15.3cm FlowFit connection bend 90° 620.802.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4", L=5.2cm 620.750.00.1 CuSn4Zn2PS, d=16mm, Rp=3/8", L=3.6cm 620.751.00.1 CuSn4Zn2PS, d=20mm, Rp=3/8", L=3.6cm 620.760.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=3.6cm 620.761.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=3.6cm 620.810.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=5.2cm 620.811.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=5.2cm 620.821.00.1 CuSn4Zn2PS, d=20mm, Rp=3/4", L=5.2cm 620.770.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=7.8cm 620.771.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=7.8cm 620.800.00.1 CuSn4Zn2PS, d=16mm, Rp=3/8", L=5.2cm 620.801.00.1 CuSn4Zn2PS, d=20mm, Rp=3/8", L=5.2cm FlowFit T-elbow tap connector 90°, offset 620.951.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=3.6cm 620.981.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=5.2cm FlowFit double elbow tap connector 90°: 620.830.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=16mm, L=5.2cm 620.831.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=20mm, L=5.2cm 620.832.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=25mm, L=5.2cm 620.841.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=16mm, L=5.2cm 620.842.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=20mm, L=5.2cm 620.851.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=5.2cm 620.852.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=25mm, L=5.2cm FlowFit corner elbow connector 90° 620.881.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=3.6cm 620.921.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=5.2cm FlowFit set of connection bend 90°, double 619.620.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=4.7cm, AD=15cm 619.621.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15cm FlowFit connection bend 90°, premounted 619.630.00.1 single: CuSn4Zn2PS, d=16mm, Rp=1/2", L1=5.2cm 619.631.00.1 single: CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm FlowFit elbow tap connector 90°, premounted, double 619.640.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=5.2cm, AD=15.3cm 619.651.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm 619.641.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=10cm FlowFit PushFit tap connector box 90° pre-mounted, double 619.661.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm FlowFit elbow tap connector 90°, premounted, double 619.671.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=7.8cm, AD=15.3cm FlowFit connection bend 90°, premounted, double, with drain pipe bracket and connection bend 619.681.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm FlowFit elbow tap connector 90°, premounted, double 619.690.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=3.6cm, AD=15.3cm FlowFit elbow tap connector 90° for concealed cistern: 620.790.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.791.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" FlowFit Mepla elbow tap connector 90° for concealed cistern 620.890.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.891.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" FlowFit FloiwFit connector T-piece for concealed cistern 620.990.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.991.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" Manifold with threaded connection and connection nipple for manifold, for MasterFix 653.428.00.1 CC770S, Rp=3/4", RMF1=1/2", R1=3/4", 2 outlets 653.429.00.1 CC770S, Rp=3/4", RMF1=1/2", R1=3/4", 3 outlets Offset bend with male thread 653.478.00.1 CC499K, R=3/4" Cap with MasterFix 653.420.00.1 CW617N, RpMF=1/2" FlowFit connection nipple for manifold, for Euro cone 620.330.00.1 CuZn21Si3P, d=16mm, G=3/4" 620.331.00.1 CuZn21Si3P, d=20mm, G=3/4"
Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company
Manufacturer:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval

#2311919

‘Hetta system’ consisting of brass bodied nickel plated, compression or press fit (‘U’ crimping profile) fittings for use with multilayer pipe PERT/AL/PERT. Maximum working pressure 10.0 Bar. Maximum working temperature 95°C.

Section:
1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
Section Subtitle:
Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
WRAS Approval Number:
2311919
Size:
Compression: 16mm, 20mm. Press Fittings: 16mm, 20mm, 25mm, 32mm, 40mm, 63mm. Pipe: 16 - 63mm.
Marking:
Compression fittings: Tweetop ‘T’ logo, size, EN1254-3, production date and manufacturing source on compression nut. Press fittings: Tweetop ‘T’ logo, letter for Type (L for elbow; T for Tee) and size on Body. Tweetop name and ‘T’ logo, size, U (press profile), ISO standard, production date and manufacturing source on sleeve. Key to production date/manufacturing source = aAY, with a (month), A (Year), Y (production facility). Where: a = Month, starting with a = January, b= February etc. A = Year, starting with G = 2018, H = 2019, I = 2020, J = 2021, K = 2022, L = 2023. Y = Manufacturing facility denoted by the letter L, S or A. e.g. bGA = manufactured February 2018 by facility A Pipe: , Hetta Systems, size, pressure ratings and date of manufacture (YYYY/MM/DD).
Installation Requirements:
R001
Expiry date:
30/11/2028
Model:
PRESS COUPLING: 06011003 - 16x16, 06011005 - 18x18, 06011007 - 20x20, 06011009 - 25x25, 06011011 - 32x32, 06011013 - 40x40, 06011015 - 50x50, 06011017 - 63x63. PRESS COUPLING-REDUCER: 06011103 - 18x16, 06011105 - 20x16, 06011107 - 25x16, 06011109 - 32x16, 06011111 - 20x18, 06011113 - 25x18, 06011115 - 32x18, 06011117 - 25x20, 06011119 - 32x20, 06011121 - 32x25, 06011122 - 40x20, 06011123 - 40x25, 06011124 - 50x25, 06011125 - 40x32, 06011126 - 50x32, 06011127 - 50x40, 06011120 - 63x25, 06011128 - 63x32, 06011129 - 63x40, 06011131 - 63x50. MALE PRESS CONNECTION: 06011205 - 16x½", 06011207 - 16x¾", 06011209 - 16x1", 06011211 - 18x½”, 06011213 - 18x¾”, 06011215 - 20x½", 06011217 - 20x¾", 06011219 - 20x1", 06011221 - 25x½", 06011223 - 25x¾", 06011225 - 25x1", 06011227 - 32x¾", 06011229 - 32x1", 06011231 - 32x1½", 06011233 - 32x1¼", 06011235 - 40x1¼", 06011237 - 50x1½", 06011239 - 50x2", 06011241 - 63x2". FEMALE PRESS CONNECTION: 06011305 - 16x½", 06011307 - 16x¾", 06011309 - 16x1", 06011311 - 18x½”, 06011313 - 18x¾”, 06011315 - 20x½", 06011317 - 20x¾", 06011319 - 20x1", 06011321 - 25x½", 06011323 - 25x¾", 06011325 - 25x1", 06011327 - 32x¾", 06011329 - 32x1", 06011331 - 40x1¼", 06011333 - 50x1½". PRESS SCREW CONNECTION WITH FEMALE THREAD: 06011403 - 16x½", 06011405 - 20x¾", 06011407 - 20x1", 06011409 - 25x¾", 06011411 - 25x1", 06011413 - 32x1". PRESS ELBOW 90: 06012003 - 16x16, 06012005 - 18x18, 06012007 - 20x20, 06012009 - 25x25, 06012011 - 32x32, 06012013 - 40x40, 06012015 - 50x50, 06012017 - 63x63. PRESS ELBOW 90 WITH MALE thread: 06012103 - 16x½", 06012107 - 16x¾", 06012105 - 18x½”, 06012109 - 20x½", 06012111 - 20x¾", 06012113 - 25x½", 06012115 - 25x¾", 06012117 - 25x1", 06012119 - 32x1", 06012121 - 40x1". PRESS ELBOW 90 WITH FEMALE thread: 06012203 - 16x½", 06012205 - 16x¾", 06012207 - 18x½", 06012209 - 20x½", 06012211 - 20x¾", 06012213 - 25x½", 06012215 - 25x¾", 06012217 - 25x1", 06012219 - 32x1", 06012222 - 40x1½", 06012225 - 50x1½". PRESS ELBOW 90 REDUCER: 06012303 - 20x16, 06012305 - 25x16, 06012307 - 25x20, 06012309 - 32x20, 06012311 - 40x25, 06012313 - 40x32. PRESS ELBOW 90 - TAP CONNECTION: 06012403 - 16x½", 06012404 - 16x½"x16, 06012405 - 18x½", 06012407 - 20x½". PRESS TEE: 06013003 - 16x16x16, 06013005 - 18x18x18, 06013007 - 20x20x20, 06013009 - 25x25x25, 06013011 - 32x32x32, 06013013 - 40x40x40, 06013015 - 50x50x50, 06013017 - 63x63x63.
PRESS TEE WITH REDUCER: 06013103 - 16x25x16, 06013105 - 16x20x16, 06013106 - 16x18x16, 06013107 - 20x16x16, 06013108 - 18x16x16, 06013109 - 20x16x20, 06013110 - 18x16x18, 06013111 - 20x18x20, 06013113 - 20x20x16, 06013115 - 20x25x20, 06013117 - 25x16x25, 06013119 - 25x18x25, 06013121 - 25x20x25, 06013123 - 25x20x20, 06013125 - 25x25x20, 06013127 - 25x32x25, 06013129 - 32x16x32, 06013131 - 32x20x32, 06013133 - 32x25x32, 06013134 - 40x20x40, 06013135 - 40x25x40, 06013137 - 40x32x40, 06013138 - 50x25x50, 06013139 - 50x32x50, 06013141 - 50x40x50, 06013142 - 63x32x63, 06013143 - 63x40x63, 06013145 - 63x50x63. PRESS TEE WITH FEMALE thread: 06013203 - 16x½"x16, 06013205 - 20x½"x20, 06013207 - 20x¾"x20, 06013209 - 25x½"x25, 06013211 - 25x¾"x25, 06013213 - 25x1"x25, 06013215 - 32x¾"x32, 06013217 - 32x1"x32, 06013219 - 40x¾"x40. PRESS TEE WITH MALE thread: 06013303 - 16x½"x16, 06013305 - 20x½"x20. BRASS STOP END PRESS FIT: 06011803 - 16. COMPRESSION COUPLING: 06021001 - 16x16, 06021003 - 20x20 . COMPRESSION COUPLING REDUCER: 06021101 - 20x16, 06021103 - 25x20. MALE COMPRESSION CONNECTION: 06021201 - 16x½", 06021203 - 16x¾", 06021205 - 16x1", 06021207 - 20x½", 06021209 - 20x¾", 06021211 - 20x1". FEMALE COMPRESSION CONNECTION: 06021301 - 16x½", 06021303 - 16x¾", 06021305 - 16x1" , 06021307 - 20x½", 06021309 - 20x¾", 06021311 - 20x1". COMPRESSION ELBOW 90: 06022001 - 16x16, 06022003 - 20x20. COMPRESSION ELBOW 90 WITH MALE thread: 06022101 - 16x½", 06022103 - 16x¾", 06022105 - 20x½", 06022107 - 20x¾". COMPRESS. ELBOW 90 WITH FEMALE thread: 06022201 - 16x½", 06022203 - 16x¾", 06022205 - 20x½", 06022207 - 20x¾". COMPRESSION TEE: 06030201 - 16x16x16, 06030203 - 20x20x20. COMPRESSION TEE WITH REDUCER: 06031201 - 16x25x16, 06031203 - 20x16x20, 06031205 - 20x25x20. COMPRESSION TEE WITH FEMALE thread: 06032201 - 16x½"x16, 06032203 - 20x½"x20, 06032205 - 20x¾"x20. COMPRESSION TEE WITH MALE thread: 06033201 - 16x½"x16, 06033203 - 20x½"x20. COMPRESSION ELBOW 90 - TAP CONN: 06022401 - 16x½"F, 06022403 - 20x½"F. COMPRESSION FOUR WAY FITTING: 06024001 - 16x16x16x16, 06024003 - 20x20x20x20. MULTILAYER PIPE PERT/AL/PERT: 06010103/100 - 16x2, 06010103/200 - 16x2, 06010103/600 - 16x2, 06010103/4 - straight bars 16x2,0, 06010105/200 - 18x2, 06010107/100 - 20x2, 06010107/200 - 20x2, 06010107/4 - straight bars 20x2,0, 06010109/50 - 25x2,5, 06010109/100 - 25x2,5, 06010109/4 - straight bars 25x2,5, 06010111/50 - 32x3, 06010111/4 - straight bars 32x3,0, 06010113 - straight bars 40x4,0, 06010115 - straight bars 50x4,5, 06010117 - straight bars 63x6,0, 06010103/100 - 16x2.
Approval Holder:
Hetta Systems (UK) Ltd.
Company Name
Hetta Systems (UK) Ltd.
Address
UNIT E5 TRIDENT BUSINESS PARK DATEN AVENUE
Postcode
WA3 6AX
Country
WARRINGTON

View All Listings by this Company
Manufacturer:
Tweetop Sp Z.o.o
Company Name
Tweetop Sp Z.o.o
Address
ul.Ludowa 24 C 71-700 Szczecin Poland

View All Listings by this Company

Print This Approval

#2312082

Range of blue epoxy coated ductile iron flanged dismantling fittings with EPDM sealing rings. Maximum working pressure 16.0 Bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
1220 Fittings for use with Tube and Pipe
Section Subtitle:
Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.
WRAS Approval Number:
2312082
Size:
DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1100, DN1200, DN1400, DN1500, DN1600 & DN1800 Flanged
Marking:
Davinci on dataplate on body. SIZE, DN & EN545 casted on the body.
Installation Requirements:
R001
Expiry date:
31/12/2028
Model:
330
Approval Holder:
DAVINCI VALVES
Company Name
DAVINCI VALVES
Address
Room 3109 Unit 1 Building 2 No. 68 Zhiquan Section Dongda Street Jinjiang District CHENGDU
Postcode
610065
Country
China
Phone
+34616553797
General Email
alex@davincivalves.com

View All Listings by this Company

Print This Approval

#2104081

WC dual flush drop valve with plastic body silicone and rubber seal. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold Water Use Only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2104081
Size:
2" BSP (M)
Marking:
UK Bathrooms on top of valve body.
Installation Requirements:
R001 R571
Expiry date:
30/04/2026
Model:
UKB210
Approval Holder:
UK Bathrooms Ltd
Company Name
UK Bathrooms Ltd
Address
Aston House Redburn Road Newcastle Upon Tyne
Postcode
NE5 1NB

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 303 of 509

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.