Range of clamp fittings incorporating DZR brass bodies, EPDM ‘O’-rings. For use with Uponor PE 100 RC pipe to EN12201 only. Maximum working pressure 16.0 bar. Maximum operating temperature 20°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2007349

Size:

See models

Marking:

Uponor logo (U), CR, production code, pipe dimensions, W (wipex code on connections) and size on body.

Installation Requirements:

R001

Expiry date:

31/07/2025

Model:

Wipex double union: 1018322 (size G1) 1009035 (size G3) 1009037 (size G2xG1) 1009040 (size G3xG1) 1018323 (size G1x¼) 1022281 (size G2xG1 ¼) 1009041 (size G3xG1 ¼) 1018324 (size G2) 1009042 (size G3xG2) 1018325 (size G3) Wipex coupling: 1018328 (size 25x2,3-G1) 1018329 (size 32x2,9-G1) 1018330 (size 40x3,7-G1 ¼) 1018331 (size 50x4,6-G1 ¼) 1018332 (size 63x5,8-G2) 1018333 (size 75x6,8-G2) 1018334 (size 90x8,2G3) 1018335 (size 110x10,0-G3) Wipex tee: 1018345 (size G1-G1-G1) 1018346 (size G1 ¼-G1 ¼-G1 ¼) 1018347 (size G2-G2-G2) 1018348 (size G3-G3-G3) Wipex elbow: 1018350 (size G1-G1) 1018351 (size G1 ¼-G1 ¼) 1018352 (size G2-G2) 1018353 (size G3-G3) Wipex sleeve: 1018355 (size G1-G1) 1018356 (size G1 ¼-G1 ¼) 1018357 (size G2-G2) 1018358 (size G3-G3) Wipex flange: 1018359 (size F25/4-85/G1) 1018360 (size F32/4-100/G1 ¼) 1018362 (size F50/4-125/G2) 1018364 (size F80/8-160/G3) Wipex reducer male x female: 1018368 (size G1 ¼-G1) 1018369 (size G1 ½-G1 ¼) 1018371 (size G2-G1) 1018372 (size G2-G1 ¼) 1018374 (size G3-G1) 1018375 (size G3-G1 ¼) 1018376 (size G3-G2) Wipex jointing equal: 1042972 (size 25x2,3-25x2,3) 1042973 (size 32x2,9-32x2,9) 1042980 (size 40x3,7-40x3,7) 1042984 (size 50x4,6-50x4,6) 1042981 (size 63x5,8-63x5,8) 1042985 (size 75x6,8-75x6,8) 1042986 (size 90x8,2-90x8,2) 1042987 (size 110x10-110x10) Wipex swivel union: 1045455 (size G1) 1045456 (size G1 ¼-G1) 1045457 (size G1 ¼) 1045458 (size G2-G1 ¼) 1045459 (size G2) 1045460 (size G3-G2) 1045461 (size G3)

Product Images

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Range of stainless-steel press fittings with EPDM ‘O’-rings and EPDM washer (Live joint with BSP female thread models only) for use with stainless-steel pipe. Joints are achieved using a press fitting tool. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2007068

Size:

15-108mm. ½” - 3” BSP (M). ½” - 2” BSP (F).

Marking:

Gosung, size and material grade on fitting body. WRAS, GOSUNG, size, material grade, standard marking and date of manufacture (YYYY/MM) on pipe.

Installation Requirements:

R001

Expiry date:

31/07/2025

Model:

Fittings (SUS304 or 316L): Adapter 90 with BSP female thread: OLD15×Rp½. OLD18×Rp½. OLD22×Rp¾. Adapter with BSP male thread: OS15×Rp½. OS18×Rp½. OS22×Rp¾. OS28×Rp1. OS35×Rp1¼. OS42×Rp1½. OS54×Rp2. Adapter with plain ending: QW18. QW22. QW28. Cap: OSD15. OSD18. OSD22. OSD28. OSD35. OSD42. OSD54. OSD76.1. OSD88.9. OSD108. Elbow 45 with press ending: SK15. SK18. SK22. SK28. SK35. SK42. SK54. SK76.1. SK88.9. SK108. Elbow 45 with plain ending: 450L15. 450L18. 450L22. 450L28. 450L35. 450L42. 450L54. 450L76.1. 450L88.9. 450L108. Elbow 90 with press ending: OL15. OL18. OL22. OL28. OL35. OL42. OL54. OL76.1. OL88.9. OL108. Elbow 90 with BSP female thread: OL15N×Rp½. OL18N×Rp½. OL22N×Rp¾. OL28N×Rp1. OL35N×Rp1¼. OL42N×Rp1½. OL54N×Rp2. Elbow 90 with BSP male thread: OLW15×R½. OLW18×R½. OLW22×R¾ Elbow 90 with plain ending: OLA15. OLA18. OLA22. OLA28. OLA35. OLA42. OLA54. OLA76.1. OLA88.9. OLA108. Reducer coupler with plain ending: YOS18×15. YOS22×18. YOS28×18. YOS35×22. YOS35×28. YOS42×22. YOS42×28. YOS42×35. YOS54×28. YOS54×35. YOS54×42. Reducer Tee with press ending: OT18×15×18. OT22×15×22. OT22×18×22. OT28×15×28. OT28×18×28. OT28×22×28. OT35×22×35. OT35×28×35. OT42×22×42. OT42×28×42. OT42×35×42. OT54×22×54. OT54×28×54. OT54×35×54. OT54×42×54. OT76.1×42×76.1. OT76.1×54×76.1. OT88.9×54×88.9 OT108×54×108. OT108×76.1×108. OT108×88.9×108 Different radius straight-way with press ending: OSA15. OSA18. OSA22. OSA28. OSA35. OSA42. OSA54. OSA76.1. OSA88.9. OSA108. Straight coupler with BSP male thread: OSW15×R½. OSW18×R½. OSW18×R¾. OSW22×R½, OSW22×R¾. OSW28×R1. OSW35×R1¼. OSW42×R1½. OSW54×R2. OSW76.1×R2½. OSW88.9×R3. Straight coupler with press ending: OSB15. OSB18. OSB22. OSB28. OSB35. OSB42. OSB54. Tee with press ending: OLB15. OLB18. OLB22. OLB28. OLB35. OLB42. OLB54, OLB76.1. OLB88.9. OLB108. Tee with BSP male thread: OTY15×R½. OTY18×R½. OTY22×R½. OTY22×R¾. OTY28×R½. OTY28×R¾. OTY28×R1. OTY35×R½. OTY35×R1¼. OTY42×R1¼. OTY54×R1½. OTY54×R2. Tee with BSP female thread: OTN15×Rp½. OTN18×Rp½. OTN22×Rp½. OTN22×Rp¾. OTN28×R½. OTN28×Rp¾. OTN28×Rp1. OTN35×Rp½. OTN35×Rp1¼. OTN42×Rp1¼. OTN54×1½. OTN54×Rp2. Live joint with BSP female thread: OHZ15×Rp½. OHZ18×Rp½. OHZ18×Rp¾. OHZ22×Rp½. OHZ22×Rp¾. OHZ22×Rp1. OHZ28×Rp1. OHZ35×Rp1¼. OHZ42×Rp1¾. OHZ54×Rp2. Stainless steel pipe (SUS304 or 316L): *-00 (SUS304). *-a0 (316L). Where * = size in mm between 15 and 108, e.g. 15-00 for 15mm SUS304 pipe.

Product Images

Approval Holder:

Fujian GOSUNG Stainless Steel Pipe Co.,Ltd

Company Name

Fujian GOSUNG Stainless Steel Pipe Co.,Ltd

View All Listings by this Company

Manufacturer:

Fujian GOSUNG Stainless Steel Pipe Co.,Ltd

Company Name

Fujian GOSUNG Stainless Steel Pipe Co.,Ltd

View All Listings by this Company

‘Copper press fittings - M Profile’ range of press fittings with a brass body and EPDM ‘O’-rings for use with copper pipe manufactured to EN1057:2006 +A1:2010 seamless round copper tube R250. Joints are achieved using a specialist press fitting tool. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2007363

Note:

For above ground use only

Size:

See model.

Marking:

Flowflex logo and size on body.

Installation Requirements:

R001

Expiry date:

31/07/2025

Model:

6090GM Female Elbow: 6090GM.15x½B. 6090GM.22x¾B. 6090GM.28x1B. 6092GM Male Elbow: 6092GM.15x½B. 6092GM.22x¾B. 6092GM.28x1B. 6130GM Female Tee: 6130GM.151215B. 6130GM.221222B. 6130GM.223422B. 6130GM.281228B. 6130GM.283428B. 6130GM.351235B. 6130GM.421242B. 6130GM.541254B 6240GM Swivel Connector: 6240GM.15x¾B. 6240GM.22x1B. 6240GM.28x l¼B. 6243GM Male Adaptor: 6243GM.15x½B. 6243GM.15x¾B. 6243GM.22x½B. 6243GM.22x1B. 6243GM.28x1B. 6243GM.28x¾B. 6243GM.22x¾B. 6243GM.35x 1¼B. 6243GM.35x1. 6243GM.42x 1½B. 6243GM.54x2B. 6243GM.67x 2½B. 6243GM.76x3B. 6270GM Female Adaptor: 6270GM.15x½B. 6270GM.15x¾B. 6270GM.22x½B. 6270GM.22x1B. 6270GM.22x¾B. 6270GM.28x1B. 6270GM.28x¾B. 6270GM.35x 1¼B. 6270GM.35x1B. 6270GM.42x 1½B. 6270GM.54x2B. 6341GM Male Union: 6341GM.15x½B. 6341GM.22x¾B. 6341GM.28x1B. 6472GM Wallplate Elbow: 6472GM.15x½B.

Approval Holder:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

‘Numepress’ range of stainless-steel crimp fittings incorporating EPDM and ‘O’-rings. For use with stainless steel tube. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011045

Size:

15, 18, 22, 28, 35, 42, 54, 76, 88, 108, 114, 139, 168mm. ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2” BSP (M or F). DN50 to DN150 Flanged.

Marking:

Numepress, logo & size on body

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

F1 Coupling from 15 to 168.3 F2 Slip Coupling from 15 to 168.3 F3 90Q Female-Female Elbow from 15 to 168.3 F4 90Q Male - Female Elbow from 15 to 168.3 F5 45Q Female-Female Elbow from 15 to 168.3 F6 45Q Female - Male Elbow from 15 to 168.3 F7 Female Angle Adapter from 15 1/2" to 54 2" F8 Male Angle Adapter from 15 1/2" to 54 2" F9 Female Elbow with Wallnut from 15 1/2" to 22 3/4" Fl0 90Q Elbow with Plane Ends from 15 to 54 F11 Valve connector with swivel in stainless Steel from 15 1/2" to 76.121/2" F12 Female tee threaded adaptor from 15 1/2" to 108 2" F14 Reducer from 18-15 to 168.3-139.7 F15 Reducing tee from 18-15 to 168.3-139.7 F16 Equal Tee from 15 to 168.3 F17 Female adaptor from 15 3/ 8" to 88.9 3" F18 M ale adaptor from 15 3/8" to 108 4" F19 Flanges adaptor from 15 DN15 to 108 DNlO0 F20 Pre-formed pipe bridge from 15 to 28 F21 Plug from 15 to 108 F22 Air tuve Pipe Bridge from 15 to 28 F23 Pipe Bridge from 15 to 28 F24 3 Pieces adaptor from 15 to 60.3 F25 Female -Female pipe bridge from 15 to 28 F26 Female connector from 15 1/2" to 54 2" F27 Male connector from 15 1/2" to 54 2" F28 Press flanged adaptor from 54 DN50 to 168.3 DN150 F30 Cross or reduced cross from 15-15-15-15 to 168.3-168.3-168.3-168 .3 F33 45Q Male angle adaptor from 15 1/ 2" to 28 1" F34 90Q Female angle adaptor 15 3/ 8" to 35 1 1/ 4" F35 90Q Female angle adaptor with swivel nut from 15 1/2" to 54 2" F36 Male Tee threaded adaptor from 15 3/8" to 35 11/4" F37 Male threaded cross from 15 1/2" to 108-4" F38 Female threaded cross from 15 1/ 2" to 108 4" F39 90Q Male angle adaptor from 15 3/8" to 54 2" F41 Male union connector gas from 15 1/ 2" to 54 2" F42 Female Union connector gas from 15 1/2" to 54 2" F43 Grooved Transition from 3/4" to 2" F44 Van Stone flange from 1/2" to 2" F45 Union Gas Female threaded from 15 3/4" to 54 2" F46 Straight union with press fitting on both ends from 15 to 54 F47 Half coupling from 15 to 168.3 F48 30Q Female-Female elbow from 15 to 108 F49 30Q Elbow with plain ends from 15 to 54 F50 15Q Female-female elbow from 15 to 108 F51 60Q Female-female elbow from 15 to 108 F52 Flanges adaptor PN6 from 15 DN15 to 108 DN100 F53 Pipe penetration from 15 to 108 F54 Male plug from 16 to 168.3 F55 Weld Adaptor from 15 to 60.3 F56 75Q Female -Female elbow from 15 to 108 F57 l0Q Female-Female elbow from 15 to 108 F58 60Q Elbow with plain ends from 15 to 54 F59 lSQ Elbow with plain ends from 15 to 54 F60 Slip coupling with female thread from DN15 1/ 2" to DN54 F61 Transition for grooved coupling from DN28x33.7 to DN108x 11 4.3 F63 7SQ Elbow with plain ends from 15 to 54 F64 15Q Male -female elbow from 15 to 108 F65 Male-Female pipe penetration from 15 to 108 F66 30Q Male-female elbow from 15 to 108 F72 45Q Elbow with plain ends from 15 to 54 Pipe 15 x 0.6 mm Material 1.4401/1.4404 Pipe 18 x 0.7 mm Material 1.4401/1.4404 Pipe 22 x 0.7 mm Material 1.4401/1.4404 Pipe 28 x 0.8 mm Material 1.4401/1.4404 Pipe 35 x 1 mm Material 1.4401/1.4404 Pipe 42 x 1.1 mm Material 1.4401/1.4404 Pipe 54 x 1.2 mm Material 1.4401/1.4404 Pipe 76.1 x 1.5 mm Material 1.4 401/ 1.4404 Pipe 15 x 1 mm Material 1.4401/1.4404 Pipe 18 x 1 mm Material 1.4401/1.4404 Pipe 22 x 1.2 mm Material 1.4401/1.4404 Pipe 28 x 1.2 mm Material 1.4401/1.4404 Pipe 35 x 1.5 mm Material 1.4401/1.4404 Pipe 42 x 1.5 mm Material 1.4401/1.4404 Pipe 54 x 1.5 mm Material 1.4401/1.4404 Pipe 76.1 x 2 mm Material 1.4401/1.4404 Pipe 88.9 x 2 mm Material 1.4401/1.4404 Pipe 114.3 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2.6 mm Material 1.4401/1.4404 Pipe 168.3 x 2 mm Material 1.4401/1.4404 Pipe 168.3 x 2.6 mm Material 1.4401/1.4404 Pipe 15 x 0.6 mm Material 1.4301/1.4307 Pipe 18 x 0.7 mm Material 1.4301/1.4307 Pipe 22 x 0.7 mm Material 1.4301/1.4307 Pipe 28 x 0.8 mm Material 1.4301/1.4307 Pipe 35 x 1 mm Material 1.4301/1.4307 Pipe 42 x 1.1 mm Material 1.4301/1.4307 Pipe 54 x 1 .2 mm rv,Material 1.4301/1.4307 Pipe 76.1 x 1.5 mm Material 1.4301/1.4307 Pipe 15 x 1 mm Material 1.4301/1.4307 Pipe 18 x 1 mm Material 1.4301/1.4307 Pipe 22 x 1. 2 mm Material 1.4301/1.4307 Pipe 28 x 1.2 mm Material 1.4301/1.4307 Pipe 35 x 1.5 mm Material 1.4301/1.4307 Pipe 42 x 1.5 mm Material 1.4301/1.4307 Pipe 54 x 1.5 mm Material 1.4301/1.4307 Pipe 76.1 x 2 mm Material 1.4301/1.4307 Pipe 88.9 x 2 mm Material 1.4301/1.4307 Pipe 108 x 2 mm Material 1.4301/1.4307 Pipe 114.3 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2.6 mm Material 1.4301/1 .4307 Pipe 168.3 x 2 mm Material 1.4301/1.4307 Pipe 168.3 x 2.6 mm Material 1.4301/1.4307

Product Images

Approval Holder:

ISOTUBI SL

Company Name

ISOTUBI SL

Address

Mecànica 6 Castellbisbal

Postcode

08750

Country

Spain

General Email

xavi.armengou@isotubi.com

View All Listings by this Company

‘Epsilon Series’ polypropylene bodied compression fittings with EPDM ‘O’-rings for use with Elysee PE80 blue pipes. The fittings are supplied with a pipe liner. Above and below ground use. Maximum working pressure 12.5 bar. Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010385

Note:

The liners supplied with each fitting must be used to maintain the validity of this approval. R008 applies to the connecting blue pipework when used above ground.

Size:

See model

Marking:

Fittings: Elysee, DVGW, EU, size and PN on the compression nut. Size and date of manufacture (clock format) on body. Pipe: Elysee, EN12201, size, PN and production date code (CDDMMY, where C = decade, and is replaced with 6 to indicate 2020).

Installation Requirements:

R001 R008

Expiry date:

31/10/2025

Model:

ELYSEE COMRESSION FITTINGS: Male Adaptor 330: 330002001: Ø 20 x ½". 330002002: Ø 20 x ¾". 330002003: Ø 20 x 1". 330002501: Ø 25 x ½". 330002502: Ø 25 x ¾". 330002503: Ø 25 x 1". 330003201: Ø 32 x ½". 330003202: Ø 32 x ¾". 330003203: Ø 32 x 1". 330003204: Ø 32 x 1¼". 330003205: Ø 32 x 1½". Female Adaptor 330A: 330A02001: Ø 20 x ½". 330A02002: Ø 20 x ¾". 330A02010: Ø 20 x ⅜". 330A02501: Ø 25 x ½". 330A02502: Ø 25 x ¾". 330A02503: Ø 25 x 1". 330A03201: Ø 32 x ½". 330A03202: Ø 32 x ¾". 330A03203: Ø 32 x 1". 330A03204: Ø 32 x 1¼". 330A03205: Ø 32 x 1½". End Plug 330B: 330B00020: Ø 20. 330B00025: Ø 25. 330B00032: Ø 32. Coupling 331: 331020020: Ø 20 x 20. 331025025: Ø 25 x 25. 331032032: Ø 32 x 32. Reducing Coupling 331A: 331A02520: Ø 25 x 20. 331A03220: Ø 32 x 20. 331A03225: Ø 32 x 25. Elbow 332: 332020020: Ø 20 x 20. 332025025: Ø 25 x 25. 332032032: Ø 32 x 32. Male Elbow 332A: 332A02001: Ø 20 x ½". 332A02002: Ø 20 x ¾". 332A02501: Ø 25 x ½". 332A02502: Ø 25 x ¾". 332A02503: Ø 25 x 1". 332A03202: Ø 32 x ¾". 332A03203: Ø 32 x 1". Female Elbow 332B: 332B02001: Ø 20 x ½". 332B02002: Ø 20 x ¾". 332B02501: Ø 25 x ½". 332B02502: Ø 25 x ¾". 332B02503: Ø 25 x 1". 332B03202: Ø 32 x ¾". 332B03203: Ø 32 x 1". Female Tee 333: 333002001: Ø 20 x ½" x 20. 333002002: Ø 20 x ¾" x 20. 333002501: Ø 25 x ½" x 25. 333002502: Ø 25 x ¾" x 25. 333002503: Ø 25 x 1" x 25. 333003202: Ø 32 x ¾" x 32. 333003203: Ø 32 x 1" x 32. Male Tee 333A: 333A02001: Ø 20 x ½" x 20. 333A02002: Ø 20 x ¾" x 20. 333A02003: Ø 20 x 1" x 20. 333A02501: Ø 25 x ½" x 25. 333A02502: Ø 25 x ¾" x 25. 333A02503: Ø 25 x 1" x 25. 333A03201: Ø 32 x ½" x 32. 333A03202: Ø 32 x ¾" x 32. 333A03203: Ø 32 x 1" x 32. Tee 334: 334020020: Ø 20 x 20 x 20. 334025025: Ø 25 x 25 x 25. 334032032: Ø 32 x 32 x 32. Reducing Tee 334A: 334A02520: Ø 25 x 20 x 25. 334A03225: Ø 32 x 25 x 32. Wall Female Elbow 332D: 332D02001: Ø 20 x ½". 332D02502: Ø 25 x ¾". Elbow Female For POP-UP 332C: 332C02501: Ø 25 x ½" x 25. 332C03201: Ø 32 x ½" x 32. 332C03202: Ø 32 x ¾" x 32. Universal Adaptor 321C: 321C02522: Ø 25 x 22. 321C03222: Ø 32 x 22. Repair Coupling 331B: 331B00025: Ø 25 x 25. 331B00032: Ø 32 x 32. ELYSEE PE80 BLUE PIPES: 21125020***: 20mmX2.3mm, SDR9, SF1.25, PN12.5. 21125025***: 25mmX2.3mm, SDR11, SF1.25, PN12.5. 21125032***: 32mmX3.0mm, SDR11, SF1.25, PN12.5. Where *** = length of the pipe coil, (025 = 25m, 050 = 50m, 100 = 100m).

Approval Holder:

Elysee Irrigation Ltd.

Company Name

Elysee Irrigation Ltd.

Address

5, Pentadaktylou St. 2643 Ergates Industrial Area, Nicosia

Country

Cyprus

Phone

+357 22 455 000

View All Listings by this Company

Manufacturer:

Elysee Irrigation Ltd.

Company Name

Elysee Irrigation Ltd.

Address

5, Pentadaktylou St. 2643 Ergates Industrial Area, Nicosia

Country

Cyprus

Phone

+357 22 455 000

View All Listings by this Company

Range of compression fittings with polypropylene bodies, nuts, acetal grip rings, EPDM ‘O’-rings and plastic pipe liners for use with MDPE pipe manufactured to BS EN 12201. For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2009337

Note:

The supplied pipe liners must be installed to maintain the validity of this approval.

Size:

20-63mm compression. ½”-2” BSP (M) or (F)

Marking:

Manufacturers name, size and date of manufacture (clock format) on body.

Installation Requirements:

R001

Expiry date:

30/09/2025

Model:

Couplers: 20.41.2005.020: 20mm 20.41.2005.025: 25mm 20.41.2005.032: 32mm 20.41.2005.040: 40mm 20.41.2005.050: 50mm 20.41.2005.063: 63mm Reducing Couplers: 20 41 2007 005: 25mm x 20mm 20 41 2007 009: 32mm x 20mm 20 41 2007 010: 32mm x 25mm 20 41 2007 015: 40mm x 32mm 20 41 2007 019: 50mm x 32mm 20 41 2007 020: 50mm x 40mm 20 41 2007 023: 63mm x 32mm 20 41 2007 024: 63mm x 40mm 20 41 2007 025: 63mm x 50mm Male Adaptors - Male BSP Thread: 20 41 2037 005: 20mm x ½” 20 41 2037 010: 20mm x ¾” 20 41 2037 011: 20mm x 1” 20 41 2037 015: 25mm x ½” 20 41 2037 020: 25mm x ¾” 20 41 2037 025: 25mm x 1” 20 41 2037 030: 32mm x ¾” 20 41 2037 035: 32mm x 1” 20 41 2037 040: 32mm x 1¼ 20 41 2037 042: 40mm x 1” 20 41 2037 045: 40mm x 1¼” 20 41 2037 046: 40mm x 1½” 20 41 2037 049: 50mm x 1¼” 20 41 2037 050: 50mm x 1½” 20 41 2037 052: 50mm x 2” 20 41 2037 053: 63mm x 1½” 20 41 2037 055: 63mm x 2” Female Adaptors - Female BSP Thread: 20 41 2065 005: 20mm x ½” 20 41 2065 010: 20mm x ¾” 20 41 2065 019: 25mm x ½” 20 41 2065 020: 25mm x ¾” 20 41 2065 022: 25mm x 1” 20 41 2065 033: 32mm x ½” 20 41 2065 034: 32mm x ¾” 20 41 2065 035: 32mm x 1” 20 41 2065 036: 32mm x 1¼” 20 41 2065 044: 40mm x 1” 20 41 2065 045: 40mm x 1¼” 20 41 2065 046: 40mm x 1½” 20 41 2065 049: 50mm x 1¼” 20 41 2065 050: 50mm x 1½” 20 41 2065 051: 50mm x 2” 20 41 2065 054: 63mm x 1½” 20 41 2065 055: 63mm x 2” Elbow 90°: 20 41 2001 020: 20mm 20 41 2001 025: 25mm 20 41 2001 032: 32mm 20 41 2001 040: 40mm 20 41 2001 050: 50mm 20 41 2001 063: 63mm Elbow 90° Female BSP Thread: 20 41 2002 005: 20mm x ½’ 20 41 2002 006: 20mm x ¾” 20 41 2002 009: 25mm x ½” 20 41 2002 010: 25mm x ¾” 20 41 2002 011: 25mm x 1” 20 41 2002 013: 32mm x ¾” 20 41 2002 015: 32mm x 1” 20 41 2002 019: 40mm x 1” 20 41 2002 020: 40mm x 1¼” 20 41 2002 025: 50mm x 1½” 20 41 2002 026: 50mm x 2” 20 41 2002 030: 63mm x 2” Elbow 90° Male BSP Thread: 20 41 2085 005: 20mm x ½” 20 41 2085 006: 20mm x ¾” 20 41 2085 009: 25mm x ½” 20 41 2085 010: 25mm x ¾” 20 41 2085 011: 25mm x 1” 20 41 2085 014: 32mm x ¾” 20 41 2085 015: 32mm x 1” 20 41 2085 016: 32mm x 1¼” 20 41 2085 019: 40mm x 1” 20 41 2085 020: 40mm x 1¼” 20 41 2085 021: 40mm x 1½” 20 41 2085 022: 40mm x 2” 20 41 2085 022: 50mm x 1¼” 20 41 2085 025: 50mm x 1½” 20 41 2085 026: 50mm x 2” 20 41 2085 029: 63mm x 1½” 20 41 2085 030: 63mm x 2” Tee Male BSP Threaded: 20 41 2086 005: 20mm x ½” 20 41 2086 006: 20mm x ¾” 20 41 2086 009: 25mm x ½” 20 41 2086 010: 25mm x ¾” 20 41 2086 011: 25mm x 1” 20 41 2086 014: 32mm x ¾” 20 41 2086 015: 32mm x 1” 20 41 2086 019: 40mm x 1” 20 41 2086 020: 40mm x 1¼” 20 41 2086 021: 40mm x 1½” 20 41 2086 025: 50mm x 1½” 20 41 2086 026: 50mm x 2” 20 41 2086 030: 63mm x 2” Tee Female BSP Threaded: 20 41 2004 005: 20mm x ½” 20 41 2004 006: 20mm x ¾” 20 41 2004 009: 25mm x ½” 20 41 2004 010: 25mm x ¾” 20 41 2004 011: 25mm x 1” 20 41 2004 014: 32mm x ¾” 20 41 2004 015: 32mm x 1” 20 41 2004 019: 40mm x 1” 20 41 2004 020: 40mm x 1¼” 20 41 2004 021: 40mm x 1½” 20 41 2004 024: 50mm x 1¼” 20 41 2004 025: 50mm x 1½” 20 41 2004 026: 50mm x 2” 20 41 2004 030: 63mm x 2” Tee: 20 41 2003 020: 20mm 20 41 2003 025: 25mm 20 41 2003 032: 32mm 20 41 2003 040: 40mm 20 41 2003 050: 50mm 20 41 2003 063: 63mm Reducing Tee: 20 41 2004 104: 20 x 25 x 20mm 20 41 2004 105: 25 x 20 x 25mm 20 41 2004 110: 32 x 25 x 32mm 20 41 2004 115: 40 x 32 x 40mm 20 41 2004 118: 50 x 25 x 50mm 20 41 2004 119: 50 x 32 x 50mm 20 41 2004 120: 50 x 40 x 50mm 20 41 2004 122: 63 x 25 x 63mm 20 41 2004 123: 63 x 32 x 63mm 20 41 2004 124: 63 x 40 x 63mm 20 41 2004 125: 63 x 50 x 63mm End Cap: 20 41 2012 020: 20mm 20 41 2012 025: 25mm 20 41 2012 032: 32mm 20 41 2012 040: 40mm 20 41 2012 050: 50mm 20 41 2012 063: 63mm

Approval Holder:

Plimat (UK) Ltd

Company Name

Plimat (UK) Ltd

Address

Unit 7, Newmans Copse Road, Hounsdown Business Park, Totton, Southampton

Postcode

SO40 9LX

Phone

0845 055 9022

View All Listings by this Company

Fluidfit range of hose barb fittings/stem fittings with push fit connections. Also with EPDM ‘O’-rings. 12 & 15mm models are for use with LLDPE pipe, 22mm models are for use with PEX pipe. Cold water use only Maximum working pressure 10.0 Bar

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2009023

Size:

12mm push fit X barbed crimp connection 15mm push fit X barbed crimp connection 22mm push fit X barbed crimp connection

Marking:

CDC and size on collet

Installation Requirements:

R001

Expiry date:

30/09/2025

Model:

HCBB 1210 (12mm) HCBB 15-1/2 (15mm) HCBB 22-1/2 (15mm) HCBB 22-3/4 (15mm)

Approval Holder:

CDC Pneumatics Corp.

Company Name

CDC Pneumatics Corp.

Address

30, 1-Gil, Secheon-no, Dasa-eup, Dalseong-gun, Daegu (Saecheon-ri) 42921

Country

South Korea

Phone

+82 533547501

General Email

sales@cdcpneumatics.com

View All Listings by this Company

Manufacturer:

CDC Pneumatics Corp.

Company Name

CDC Pneumatics Corp.

Address

30, 1-Gil, Secheon-no, Dasa-eup, Dalseong-gun, Daegu (Saecheon-ri) 42921

Country

South Korea

Phone

+82 533547501

General Email

sales@cdcpneumatics.com

View All Listings by this Company

Range of press fittings incorporating copper or copper alloy bodies and EPDM O’-rings for use with copper tube to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010316

Size:

See model.

Marking:

Conex logo >B< on body

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

Copper alloy: PIR4090G; - Threaded Elbow PIR4090G040400 – ½” x ½” BSP (M) PIR4090G060600 – ¾” x ¾” BSP (M) PIR4092G; - Press Elbow PIR4092G040400 – ½” x ½” BSP (M) PIR4092G060600 – ¾” x ¾” BSP (M) PIR4243G; - Male Adaptor PIR4243G040400 – ½” x ½” BSP (M) PIR4243G040600 – ½” x ¾” BSP (M) PIR4243G060400 – ¾” x ½” BSP (M) PIR4243G060600 – ¾” x ¾” BSP (M) PIR4243G080600 – 1” x ¾” BSP (M) PIR4243G080800 – 1” x 1” BSP (M) PIR4471G; - Female Wallplate Elbow PIR4471G040400 – ½” x ½” BSP (M) PIR4471G060600 – ¾” – ¾” BSP (M) PIR4473G; - Male Wall plate Elbow PIR4473G040400 – ½” BSP (M) PIR4270G; - Female Adaptor PIR4270G040400 – ½” x ½” BSP (M) PIR4270G060600 – ¾” x ¾” BSP (M) PIR4270G080800 – 1” x 1” BSP (M Copper: PIR5040; - 45° Street Elbow PIR5040 040000 – ½” BSP (M) PIR5040 060000 – ¾” BSP (M) PIR5040 080000 – 1” BSP (M) PIR5001; - 90° Street Bend PIR5001 040000 – ½” BSP (M) PIR5001 060000 – ¾” BSP (M) PIR5001 080000 – 1” BSP (M) PIR5240; - Reducing Coupler PIR5240 060400 – ¾” x ½” BSP (M) PIR5240 080400 – 1” x ½” BSP (M) PIR5240 080600 – 1” x ¾” BSP (M) PIR5130; - Tee Reduced PIR5130 060604 – ¾” x ¾” x ½” BSP (M) PIR5002; - 90° Bend PIR5002 040000 – ½” BSP (M) PIR5002 060000 – ¾” BSP (M) PIR5002 080000 – 1” V PIR5041; - 45° Elbow PIR5041 040000 – ½” BSP (M) PIR5041 060000 – ¾” BSP (M) PIR5041 080000 – 1” BSP (M) PIR5130; - Equal Tee PIR5130 040000 – ½” BSP (M) PIR5130 060000 – ¾” BSP (M) PIR5130 080000 – 1” BSP (M) PIR5270; - Coupler PIR5270 040000 – ½” BSP (M) PIR5270 060000 – ¾” BSP (M) PIR5270 080000 – 1” BSP (M) PIR5301; – Stop End PIR5301 040000 – ½” BSP (M) PIR5301 060000 – ¾” BSP (M) PIR5301 080000 – 1” BSP (M) PIR5130RB; - Tee Reduced Branch PIR5130 060406 – ¾” x ½” x ¾” BSP (M) PIR5130 080408 – 1” x ½” x 1” BSP (M) PIR5130 080608 – 1” x ¾” x 1” BSP (M) PIR5275; - Slip Coupler PIR5275 040000 – ½” BSP (M) PIR5275 060000 – ¾” BSP (M) PIR5275 080000 – 1” BSP (M) PIR5243; - Fitting Reducer PIR5243 060400 – ¾” x ½” BSP (M) PIR5243 080400 – 1” x ½” BSP (M) PIR5243 080600 – 1” x ¾” BSP (M) PIR5130REB - Tee Reduced End & Branch PIR5130 060404 – ¾” x ½” x ½” BSP (M) Models added February 2021: PIR5130 080806 – 1” X 1” X ¾” BSP (M) PIR5130 040604 – ½” X ¾” X ½” BSP (M) PIR5130 060806 – ¾“ X 1” X ¾” BSP (M) PIR5130 040804 – ½” X 1” X ½” BSP (M) PIR5130 080404 – 1” X ½” X ½” BSP (M) PIR5130 080604 – 1” X ¾” X ½” BSP (M) PIR5130 080406 – 1” X ½” X ¾” BSP (M)

Product Images

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

IBP Atcosa SL

Company Name

IBP Atcosa SL

Address

General Email

View All Listings by this Company

Range of press fittings with a stainless steel body and EPDM ‘O’ rings for use with stainless steel 316L pipe manufactured to EN10312. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101334

Size:

see model

Marking:

Dunshan Press and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

DS2001‐15 Equal coupling 15mm DS2001‐18 Equal coupling 18mm DS2001‐22 Equal coupling 22mm DS2001‐28 Equal coupling 28mm DS2001‐35 Equal coupling 35mm DS2001‐42 Equal coupling 42mm DS2001‐54 Equal coupling 54mm DS2002‐15 Adjustable coupling 15mm DS2002‐18 Adjustable coupling 18mm DS2002‐22 Adjustable coupling 22mm DS2002‐28 Adjustable coupling 28mm DS2002‐35 Adjustable coupling 35mm DS2002‐42 Adjustable coupling 42mm DS2002‐54 Adjustable coupling 54mm DS2003‐15 90° equal elbow 15mm DS2003‐18 90° equal elbow 18mm DS2003‐22 90° equal elbow 22mm DS2003‐28 90° equal elbow 28mm DS2003‐35 90° equal elbow 35mm DS2003‐42 90° equal elbow 42mm DS2003‐54 90° equal elbow 54mm DS2004‐15 90° plain elbow‐B 15mm DS2004‐18 90° plain elbow‐B 18mm DS2004‐22 90° plain elbow‐B 22mm DS2004‐28 90° plain elbow‐B 28mm DS2004‐35 90° plain elbow‐B 35mm DS2004‐42 90° plain elbow‐B 42mm DS2004‐54 90° plain elbow‐B 54mm DS2005‐15 45° equal elbow 15mm DS2005‐18 45° equal elbow 18mm DS2005‐22 45° equal elbow 22mm DS2005‐28 45° equal elbow 28mm DS2005‐35 45° equal elbow 35mm DS2005‐42 45° equal elbow 42mm DS2005‐54 45° equal elbow 54mm DS2006‐15 45° plain elbow‐B 15mm DS2006‐18 45° plain elbow‐B 18mm DS2006‐22 45° plain elbow‐B 22mm DS2006‐28 45° plain elbow‐B 28mm DS2006‐35 45° plain elbow‐B 35mm DS2006‐42 45° plain elbow‐B 42mm DS2006‐54 45° plain elbow‐B 54mm DS2007‐15 Equal tee 15mm DS2007‐18 Equal tee 18mm DS2007‐22 Equal tee 22mm DS2007‐28 Equal tee 28mm DS2007‐35 Equal tee 35mm DS2007‐42 Equal tee 42mm DS2007‐54 Equal tee 54mm DS2008‐18*15 Reducing tee 18mm×15mm DS2008‐22*15 Reducing tee 22mm×15mm DS2008‐22*18 Reducing tee 22mm×18mm DS2008‐28*15 Reducing tee 28mm×15mm DS2008‐28*18 Reducing tee 28mm×18mm DS2008‐28*22 Reducing tee 28mm×22mm DS2008‐35*15 Reducing tee 35mm×15mm DS2008‐35*18 Reducing tee 35mm×18mm DS2008‐35*22 Reducing tee 35mm×22mm DS2008‐35*28 Reducing tee 35mm×28mm DS2008‐42*15 Reducing tee 42mm×15mm DS2008‐42*18 Reducing tee 42mm×18mm DS2008‐42*22 Reducing tee 42mm×22mm DS2008‐42*28 Reducing tee 42mm×28mm DS2008‐42*35 Reducing tee 42mm×35mm DS2008‐54*15 Reducing tee 54mm×15mm DS2008‐54*18 Reducing tee 54mm×18mm DS2008‐54*22 Reducing tee 54mm×22mm DS2008‐54*28 Reducing tee 54mm×28mm DS2008‐54*35 Reducing tee 54mm×35mm DS2008‐54*42 Reducing tee 54mm×42mm DS2009‐15*Rp1/2 Female coupling 15mm×Rp1/2’’ DS2009‐22*Rp3/4 Female coupling 22mm×Rp3/4” DS2009‐28*Rp1 Female coupling 28mm×Rp1” DS2009‐35*Rp1 1/4 Female coupling 35mm×Rp1‐“1/4” DS2009‐42*Rp1 1/2 Female coupling 42mm×Rp1‐1/2” DS2009‐54*Rp2 Female coupling 54mm×Rp2” DS2010‐15*G1/2 Rotatable coupling 15mm×G1/2” DS2010‐18*G1/2 Rotatable coupling 18mm×G1/2” DS2010‐22*G3/4 Rotatable coupling 22mm×G3/4” DS2010‐28*G1 Rotatable coupling 28mm×G1” DS2010‐35*G1 1/4 Rotatable coupling 35mm×G1‐1/4” DS2010‐42*G1 1/2 Rotatable coupling 42mm×G1‐1/2” DS2010‐54*G2 Rotatable coupling 54mm×G2” DS2011‐15*R1/2 Male coupling 15mm×R1/2” DS2011‐18*R1/2 Male coupling 18mm×R1/2” DS2011‐22*R3/4 Male coupling 22mm×R3/4” DS2011‐28*R1 Male coupling 28mm×R1” DS2011‐35*R1 1/4 Male coupling 35mm×R1‐1/4” DS2011‐42*R1 1/2 Male coupling 42mm×R1‐1/2” DS2011‐54*R2 Male coupling 54mm×R2” DS2012‐15*Rp1/2 Female elbow 15mm×Rp1/2” DS2012‐18*Rp1/2 Female elbow 18mm×Rp1/2” DS2012‐22*Rp3/4 Female elbow 22mm×Rp3/4” DS2012‐28*Rp1 Female elbow 28mm×Rp1” DS2012‐35*Rp1 1/4 Female elbow 35mm×Rp1‐1/4” DS2012‐42*Rp1 1/2 Female elbow 42mm×Rp1‐1/2” DS2012‐54*Rp2 Female elbow 54mm×Rp2” DS2013‐15*R1/2 Male elbow 15mm×R1/2” DS2013‐18*R1/2 Male elbow 18mm×R1/2” DS2013‐22*R1/2 Male elbow 22mm×R1/2” DS2013‐22*R3/4 Male elbow 22mm×R3/4” DS2013‐28*R1 Male elbow 28mm×R1” DS2013‐35*R1 1/4 Male elbow 35mm×R1‐1/4” DS2013‐42*R1 1/2 Male elbow 42mm×R1‐1/2” DS2013‐54*R2 Male elbow 54mm×R2” DS2014‐15*Rp1/2 Female tee 15mm×Rp1/2” DS2014‐18*Rp1/2 Female tee 18mm×Rp1/2” DS2014‐22*Rp3/4 Female tee 22mm×Rp3/4” DS2014‐28*Rp1/2 Female tee 28mm×Rp1/2 DS2014‐28*Rp1 Female tee 28mm×Rp1” DS2014‐35*Rp1 1/4 Female tee 35mm×Rp1‐1/4” DS2014‐42*Rp1 1/2 Female tee 42mm×Rp1‐1/2” DS2014‐54*Rp2 Female tee 54mm×Rp2” DS2015‐15*R1/2 Male tee 15mm×R1/2” DS2015‐18*R1/2 Male tee 18mm×R1/2” DS2015‐22*R3/4 Male tee 22mm×R3/4” DS2015‐28*R1/2 Male tee 28 mm×R1/2’’ DS2015‐28*R1 Male tee 28mm×R1” DS2015‐35*R1 1/4 Male tee 35mm×R1‐1/4” DS2015‐42*R1 1/2 Male tee 42mm×R1‐1/2” DS2015‐54*R2 Male tee 54mm×R2” DS2016‐18*15 Reducer‐A 18mm×15mm DS2016‐22*15 Reducer‐A 22mm×15mm DS2016‐22*18 Reducer‐A 22mm×18mm DS2016‐28*15 Reducer‐A 28mm×15mm DS2016‐28*18 Reducer‐A 28mm×18mm DS2016‐28*22 Reducer‐A 28mm×22mm DS2016‐35*15 Reducer‐A 35mm×15mm DS2016‐35*18 Reducer‐A 35mm×18mm DS2016‐35*22 Reducer‐A 35mm×22mm DS2016‐35*28 Reducer‐A 35mm×28mm DS2016‐42*15 Reducer‐A 42mm×15mm DS2016‐42*18 Reducer‐A 42mm×18mm DS2016‐42*22 Reducer‐A 42mm×22mm DS2016‐42*28 Reducer‐A 42mm×28mm DS2016‐42*35 Reducer‐A 42mm×35mm DS2016‐54*42 Reducer‐A 54mm×42mm DS20107‐18*15 Reducer Coupling‐B 18mm×15mm DS20107‐22*15 Reducer Coupling‐B 22mm×15mm DS20107‐22*18 Reducer Coupling‐B 22mm×18mm DS20107‐28*15 Reducer Coupling‐B 28mm×15mm DS20107‐28*18 Reducer Coupling‐B 28mm×18mm DS20107‐28*22 Reducer Coupling‐B 28mm×22mm DS20107‐35*15 Reducer Coupling‐B 35mm×15mm DS20107‐35*18 Reducer Coupling‐B 35mm×18mm DS20107‐35*22 Reducer Coupling‐B 35mm×22mm DS20107‐35*28 Reducer Coupling‐B 35mm×28mm DS20107‐42*15 Reducer Coupling‐B 42mm×15mm DS20107‐42*18 Reducer Coupling‐B 42mm×18mm DS20107‐42*22 Reducer Coupling‐B 42mm×22mm DS20107‐42*28 Reducer Coupling‐B 42mm×28mm DS20107‐42*35 Reducer Coupling‐B 42mm×35mm DS20107‐54*15 Reducer Coupling‐B 54mm×15mm DS20107‐54*18 Reducer Coupling‐B 54mm×18mm DS20107‐54*22 Reducer Coupling‐B 54mm×22mm DS20107‐54*28 Reducer Coupling‐B 54mm×28mm DS20107‐54*35 Reducer Coupling‐B 54mm×35mm DS20107‐54*42 Reducer Coupling‐B 54mm×42mm

Product Images

Approval Holder:

Wenzhou Dunshan EPT Co.,Ltd.

Company Name

Wenzhou Dunshan EPT Co.,Ltd.

Address

Building B, No. 500, Lingde Road, Kunpeng Street, Oujiangkou Industrial Cluster, Wenzhou City, Zhejiang Province

Country

China

View All Listings by this Company

Manufacturer:

Wenzhou Dunshan EPT Co.,Ltd.

Company Name

Wenzhou Dunshan EPT Co.,Ltd.

Address

Building B, No. 500, Lingde Road, Kunpeng Street, Oujiangkou Industrial Cluster, Wenzhou City, Zhejiang Province

Country

China

View All Listings by this Company

Range of water meters with plastic bodies and EPDM ‘O’-rings. The inlets incorporate a plastic strainer. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1505 Water Meters

Size:

See model.

Marking:

ARAD on cap. Flow arrow on body. ARAD, model number and other technical info on meter face

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

Water meter Multi-Jet type M Polymer family: M15 ¾” BSP (M) M20 1” BSP (M) M25 1¼'' BSP (M)

Product Images

Approval Holder:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

General Email

Dars@arad.co.il

View All Listings by this Company

Manufacturer:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

General Email

Dars@arad.co.il

View All Listings by this Company