Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2112025

ERA-01 range of SDR11 and SDR17 polyethylene butt welded fittings for use with ERA-02 range of SDR11 and SDR17 PE 100 pipe. SDR11 rated pipe and fittings have a maximum working pressure of 16.0 bar. SDR17 rated pipe and fittings have a maximum working pressure of 10.0 bar. For above and below ground use. Cold water use only.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2112025
Size:: SDR11 pipe and fittings = DN75 – DN315. SDR17 pipe and fittings = DN160 – DN315.
Marking:: ‘ERA®’ and technical information on pipe and fitting.
Installation Requirements:: R001
Expiry date:: 31/12/2026
Model:: ERA-01 range of fittings (90° elbow, 45° elbow, flange, cross, straight tee, reducing cross, reducing tee, end cap and reducing socket) for use with ERA-02 pipe.

Product Images

Approval Holder:: ERA Piping (Zhejiang) Co.,Ltd.

Company Name
ERA Piping (Zhejiang) Co.,Ltd.
Address
No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang
Country
China

View All Listings by this Company
Manufacturer:: ERA Piping (Zhejiang) Co.,Ltd.

Company Name
ERA Piping (Zhejiang) Co.,Ltd.
Address
No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2112303

Range of copper press fittings with EPDM seals for use with EN1057 copper tube. The joints are achieved by means of a press tool. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2112303
Size:: see models
Marking:: Company logo (HS) and size on body
Installation Requirements:: R001
Expiry date:: 31/12/2026
Model:: 6002(Press 90° Bend C×C) 12,15,22,28,35,42,54mm 6001(Press 90° Bend FTG×C) 12,15,22,28,35,42,54mm 6041(Press 45° Bend C×C) 12,15,22,28,35,42,54mm 6040(Press 45° Bend FTG×C) 12,15,22,28,35,42,54mm 6130(Press Tee C×C×C) 12,15,22,28,35,42,54mm 6301(Press Cap) 12,15,22,28,35,42,54mm 6270(Press CouplingC×C) 12,15,22,28,35,42,54mm 6130R(Press ReducingTee C×C×C) 15×15×12, 22×22×15, 22×22×12, 22×15×15, 22×15×22, 28×28×22, 28×28×15, 28×15×22, 28×22×22, 28×15×28, 28×22×28, 35×35×28, 35×35×22,35×35×15, 42×42×35, 42×42×28, 42×42×22, 42×42×15, 54×54×42, 54×54×35, 54×54×28, 54×54×22 6240 (Press Reducing Coupling C×C) 15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28, 42×22, 54×42, 54×35; 6243 (Press Fitting Reducer Ftg×C) 15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28, 42×22, 54×42, 54×35, 54×28, 54×22

Approval Holder:: Ningbo Hengsheng Pipe Fitting Co Ltd

Company Name
Ningbo Hengsheng Pipe Fitting Co Ltd
Address
No. 28 West Jinshui Road, Ninghai, Zhejiang
Country
China
Phone
0086-574-65338995
General Email
sales@hengshen.com

View All Listings by this Company

WRAS Approval Number: #2112039

Range of press-fit end connectors (gunmetal bodies) for use with copper pipe manufactured to BS EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2112039
Size:: 15mm – 54mm compression.
Marking:: Pegler Yorkshire, size and xpress on body.
Installation Requirements:: R001
Expiry date:: 31/12/2026
Model:: ‘X press’ range comprising of models: 04305131. 04305132. 04305133. 04305141. 04305146. 04305151. 04305161.

Product Images

Approval Holder:: Pegler Yorkshire Ltd

Company Name
Pegler Yorkshire Ltd
Address
St Catherines Avenue, Balby Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+44 (0) 844 243 4400

View All Listings by this Company

WRAS Approval Number: #2112337

Range of brass tee fittings for use with copper pipe to EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2112337
Size:: See model
Marking:: Aquamatic Products Limited logo (APL) on body.
Installation Requirements:: R001
Expiry date:: 31/12/2026
Model:: B840-1 - 15mm compression x 15mm spigot x 15mm spigot. B841-1 - 22mm compression x 22mm spigot x 22mm spigot.

Product Images

Approval Holder:: Aquamatic Products Limited

Company Name
Aquamatic Products Limited
Address
Hydestile Stud Hambeldon Road Godalming Surrey
Postcode
GU8 4DE
Country
United Kingdom
Phone
01483 861559
General Email
steve@aquamatic.co.uk

View All Listings by this Company

WRAS Approval Number: #2112302

Range of end feed copper solder fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:: 1210 Fittings for use with Tube and Pipe
Section Subtitle:: End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2112302
Size:: see models
Marking:: Hengshen logo (HS) and size on body.
Installation Requirements:: R001
Expiry date:: 31/12/2026
Model:: End feed fittings: 5090 (90°Elbow Close Ruff CxC) 6,8,10,12,15,22,28,35,42,54mm 5092 (90°Street Elbow Close Ruff) 6,8,10,12,15,22,28,35,42,54mm 5090R (Reducing 90° Elbow C×C) 12×10, 12×8, 15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28,42x22,54×42, 54×35, 54×28; 5041 (45°Elbow C×C) 6,8,10,12,15,22,28,35,42,54mm 5040 (45°Elbow FTG×C) 6,8,10,12,15,22,28,35,42,54mm 5002A (90°Elbow Long TurnC×C) 6,8,10,12,15,22,28,35,42,54mm 5001A (90°Street Elbow Long Turn Ftg×C) 6,8,10,12,15,22,28,35,42,54mm 5130 (Equal Tee C×C×C) 6,8,10,12,15,22,28,35,42,54mm 5130R (Reducing TEE C×C×C) 6x6x8, 8×8×6, 10×10×15, 12×12×10, 12×12×8, 12×10×10, 12×8×8, 15×15×22, 15×15×12, 15×15×10, 15x15x8, 15×12×15, 15×12×12, 15×12×10, 15×12×8, 15x10x15, 15x10x10, 22×22×28, 22×22×15, 22×22×12, 22×15×22, 22×15×15, 22×15×12, 28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28x15x28, 28x15x22, 28×15×15, 35×35×28, 35×35×22, 35×35×15, 35×28×35, 35×28×28, 35×28×22, 35×22×35, 35×22×28, 35×22×22, 35×15×35, 42×42×35, 42×42×28, 42×42×22, 42x42x15, 42×35×42, 42×28×42, 42×22×42, 54×54×42, 54×54×35, 54×54×28, 54×54×22, 54×54×15,54×42×54, 54×35×54 5270 (Equal Coupling C×C) 6,8,10,12,15,22,28,35,42,54mm 5240 (Reducing Coupling C×C) 8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15 5243 (Fitting Reducer Ftg×C) 8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15 5301 (Tube Cap) 6,8,10,12,15,22,28,35,42,54mm 5060 (Return Bend C×C) 6,8,10,12,15,22,28,35,42,54mm 5085 (Cross Over Coupling C×C) 15, 22mm 5086 (Partial Cross Over Ftg×C) 15, 22mm 5062 (Straight Tap Connector C×FI) 15×1/2”, 15×3/4”, 22×3/4”, 22×1",28×1" 5063 (Bent Tap Connector C×FI) 15×1/2”, 15×3/4”, 22×3/4”, 22×1",28×1" Solder ring fittings: SR5090 (90°Elbow Close Ruff C×C) 8,10,12,15,22,28,35,42,54mm SR5092 (90°Street Elbow Close Ruff Ftg×C) 15,22,28mm SR5090R (Reducing 90° Elbow C×C) 22×15, 28×22, 28×15 SR5041 (45°Elbow C×C) 8,10,12,15,22,28,35,42,54mm SR5040 (45°Elbow FTG×C) 15,22,28mm SR5130 (Equal Tee C×C×C) 8,10,12,15,22,28,35,42,54mm SR5130R (Reducing TEE C×C×C) 15×15×10, 15×15×12, 15×15×22, 22×22×28, 22×22×15, 22×22×12, 22×15×22, 22×15×15, 28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28×15×28, 28×15×22,28×15×15, 35×35×28, 35×35×22, 35×35×15, 42×42×35, 42×42×28, 42×42×22, 42×42×15, 54×54×42,54×54×35, 54×54×28, 54×54×22, 54×54×15 SR5270 (Equal Coupling C×C) 8,10,12,15,22,28,35,42,54mm SR5240 (Reducing Coupling C×C) 10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15 SR5243 (Fitting Reducer Ftg×C) 10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15 SR5301 (Tube Cap) 8,10,12,15,22,28,35,42,54mm SR5085 (Cross Over Coupling C×C) 15,22mm SR5086 (Partial Cross Over Ftg×C) 15,22mm SR5062 (Straight Tap Connector C×FI) 15×1/2”, 15×3/4”, 22×3/4” SR5063 (Bent Tap Connector C×FI) 15×1/2”, 15×3/4”, 22×3/4

Approval Holder:: Ningbo Hengsheng Pipe Fitting Co Ltd

Company Name
Ningbo Hengsheng Pipe Fitting Co Ltd
Address
No. 28 West Jinshui Road, Ninghai, Zhejiang
Country
China
Phone
0086-574-65338995
General Email
sales@hengshen.com

View All Listings by this Company

WRAS Approval Number: #2111349

Range of floor standing gas fired combination boilers providing domestic hot water via a stainless-steel plate heat exchanger. Unit is supplied with a safety relief valve (8.0 bar). Maximum working pressure 7.5 bar. Maximum operating temperature 85°C.

Section:: 1465 Heaters
Section Subtitle:: Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:: 2111349
Size:: 2 ½” BSP (M)
Marking:: Eco Heating Systems Senator+ on front casing.
Installation Requirements:: R001 R140 R360
Expiry date:: 30/11/2026
Model:: Senator 400 WW Senator 500 WW

Product Images

Approval Holder:: Eco Heating Systems Groningen BV

Company Name
Eco Heating Systems Groningen BV
Address
Rigaweg 10, Groningen
Postcode
9723 TH
Country
Netherlands
Phone
+31 6 86823847
General Email
h.jans@ecohs.nl

View All Listings by this Company
Manufacturer:: Eco Heating Systems Groningen BV

Company Name
Eco Heating Systems Groningen BV
Address
Rigaweg 10, Groningen
Postcode
9723 TH
Country
Netherlands
Phone
+31 6 86823847
General Email
h.jans@ecohs.nl

View All Listings by this Company

WRAS Approval Number: #2110320

Range of wall hung, gas-fired condensing combination boilers providing domestic hot water via a plate heat exchanger and pressure relief valve set at 3.0 bar. The supplies to both primary hot water and secondary are controlled via spherical valves. The boilers incorporate a filling loop assembly which incorporates a double check valve assembly (suitable for backflow protection against Fluid Category 3). Primary circuit: Maximum working pressure 2.5 bar. Maximum operating temperature 82°C. Secondary circuit: Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:: 1465 Heaters
Section Subtitle:: Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:: 2110320
Size:: 22mm compression
Marking:: Worcester (brand of Bosch) on front of boiler. Worcester, address, model, serial No. & other tech info on adhesive label on inside of panel.
Installation Requirements:: R001
Expiry date:: 31/10/2026
Model:: Greenstar Highflow range comprising of model numbers: 7 731 600 098 (model code: 440CDi ErP). 7 731 600 099 (440CDi ErP). 7 731 600 100 (550CDi ErP). 7 731 600 101 (550CDi ERP).

Product Images

Approval Holder:: Worcester Bosch

Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company
Manufacturer:: Worcester Bosch

Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company

WRAS Approval Number: #2111371

Section:: 1465 Heaters
Section Subtitle:: Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:: 2111371
Size:: 2 ½” BSP (M)
Marking:: Lochinvar on front casing. Lochinvar , model & serial number on adhesive label on body
Installation Requirements:: R001 R140 R360
Expiry date:: 30/11/2026
Model:: TTW410 & TTW580 FLOOR STANDING GAS FIRED COMBINATION BOILERS

Approval Holder:: Lochinvar Ltd.

Company Name
Lochinvar Ltd.
Address
8 Lombard Way The MXL Centre Banbury
Postcode
OX16 4TJ
Country
Oxon
Phone
+44 (0) 1295 269981
General Email
general@lochinvar.ltd.uk

View All Listings by this Company

WRAS Approval Number: #2112015

Aquila V5 range of water meters with black epoxy coated cast iron bodies, plastic turbines, fibre/NBR flange gaskets and either NBR or EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 1505 Water Meters
Size:: See models
Marking:: DIEHL Metering and technical information under cap. Flow arrow and size on body. Size and PN on flange plate.
Installation Requirements:: R001
Expiry date:: 31/12/2026
Model:: Aquila V5 Range: Model C1 - DN50 length 300mm, Model C1 - DN65, length 300mm, Model C1 - DN80 length 350mm, Model C1 - DN100 length 350mm.

Product Images

Approval Holder:: Diehl Metering S.A.S

Company Name
Diehl Metering S.A.S
Address
67, Rue du Rhone, BP 10160, 68304 Saint Louis
Country
Cedex,

View All Listings by this Company

WRAS Approval Number: #2112024

Range of ultrasonic water meters with brass bodies incorporating EPDM ‘O’-rings. The inlets incorporate a plastic strainer. The DN15 X 165mm and DN20 X 190mm models incorporate a non-return valve on the outlet. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:: 1505 Water Meters
Size:: DN15 models: ¾” BSP (M). DN20 model: 1” BSP (M).
Marking:: Badger Meter, size, flow arrow, model name, date of manufacture (MM/YY) and technical information on meter face. Flow arrow and size on body.
Installation Requirements:: R001
Expiry date:: 31/12/2026
Model:: E-Series G2® Ultrasonic Meter Range: DN15 X 110 ultrasonic meter, meter body: Eco Brass C69300, DN15 X 114 ultrasonic meter, meter body: Eco Brass C69300, DN15 X 165 ultrasonic meter, meter body: Eco Brass C69300, DN20 X 190 ultrasonic meter, meter body: Eco Brass C69300.

Product Images

Approval Holder:: Badger Meter Inc.

Company Name
Badger Meter Inc.
Address
4545 W Brown Deer Road, Milwaukee WI
Postcode
53223
Country
United States
Phone
+1 414 371 5941
General Email
rschultz@badgermeter.com

View All Listings by this Company
Manufacturer:: Badger Meter Inc.

Company Name
Badger Meter Inc.
Address
4545 W Brown Deer Road, Milwaukee WI
Postcode
53223
Country
United States
Phone
+1 414 371 5941
General Email
rschultz@badgermeter.com

View All Listings by this Company