Range of wall hung, gas fired, combination boilers providing domestic hot water via a plate heat exchanger. The primary circuit incorporates an integral expansion vessel and a pressure relief valve set at 3.0 bar. The product is supplied with a rigid pipe filling loop, followed by a separate isolation valve. The filling loop pipe attaches to the cold water inlet valve which incorporates a double check valve assembly (verified by test, suitable for backflow protection against Fluid Category 3) on the branch to the filling loop. The primary circuit includes an isolation valve on the flow and return and is also supplied with two loose 22mm compression isolation valves and a filter. Maximum working pressure of the primary circuit is 2.5 bar and the maximum supply pressure to the secondary circuit is 10.0 bar. Max operating temperature 65°C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2207350

Size:

Secondary: 15mm compression. Primary: 22mm compression.

Marking:

Ideal heating printed on front casing. Model and size printed on drop down door.

Installation Requirements:

R001 R140 R360

Expiry date:

31/07/2027

Proviso:

Supplied with a temporary filling loop. The filling loop must be installed with the appropriate backflow prevention device in accordance with clause G24.2, Guidance to the Water Supply (Water Fittings) Regulations 1999.

Model:

Logic Max Combi² C24 – UIN 228334, Logic Max Combi² C30 – UIN 228335, Logic Max Combi² C35 – UIN 228336, Logic + Combi² C24 – UIN 228329, Logic + Combi² C30 – UIN 228330, Logic + Combi² C35 – UIN 228331, Logic Combi² C24 – UIN 228307, Logic Combi² C30 – UIN 228308, Logic Combi² C35 – UIN 228309.

Approval Holder:

Ideal Boilers Ltd

Company Name

Ideal Boilers Ltd

Address

PO Box 103 National Avenue Hull East Yorkshire

Postcode

HU5 4JN

Country

United Kingdom

Phone

07775659359

General Email

ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company

Manufacturer:

Ideal Boilers Ltd

Company Name

Ideal Boilers Ltd

Address

PO Box 103 National Avenue Hull East Yorkshire

Postcode

HU5 4JN

Country

United Kingdom

Phone

07775659359

General Email

ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company

Range of pressure limiter with stainless steel spring, plastic or chrome plated brass bodies. A5.0022.0 and A5.0027.0 incorporate with a stainless-steel mesh filter. Maximum working pressure 10.0 Bar. Maximum operating temperature 65˚C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2207328

Note:

Pressure limiting claims made by the manufacturer have not been verified by test.

Size:

see model

Marking:

A5.0006.0, A5.0014.0, A5.0022.0, A5.00229.0, A5.0027.0: Neoperl moulded on body of insert, Neoperl & direction flow arrow etched on body A5.0004.0, A5.0010.0, A5.0020.0, A5.0025.0: Neoperl moulded on body of insert

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

A5.0004.0 Pressure Limiter D 1bar insert - 18.57mm OD A5.0006.0 Pressure Limiter G1/2 1 bar - ½”BSP(F) x ½”BSP(M) A5.0010.0 Pressure Limiter 2 bar insert - 18.57mm OD A5.0014.0 Pressure Limiter D G1/2 2 bar - ½”BSP(F) x ½”BSP(M) A5.0020.0 Pressure Limiter DS 1 bar insert - 18.57mm OD A5.0022.0 Pressure Limiter DS G1/2 1 bar - ½”BSP(F) x ½”BSP(M) A5.0025.0 Pressure Limiter DS 2 bar insert - 18.57mm OD A5.0027.0 Pressure Limiter DS G1/2 2 bar - ½”BSP(F) x ½”BSP(M) A5.0029.0 Pressure Limiter DS G1/2 2 bar - OF - ½”BSP(F) x ½”BSP(M)

Product Images

Approval Holder:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim

Postcode

D-79379

Country

Germany

Phone

+49 7631 188 374

General Email

DE.Approvals@neoperl.com

View All Listings by this Company

Manufacturer:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim

Postcode

D-79379

Country

Germany

Phone

+49 7631 188 374

General Email

DE.Approvals@neoperl.com

View All Listings by this Company

Range of vertical multistage booster pumps, with stainless steel bodies and impellors. Maximum working pressure: See models Maximum working temperature 85°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2205095

Size:

See Models

Marking:

Stuart Turner, CE, Max Temperature and other Technical info on Data Plates

Installation Requirements:

R001 R415

Expiry date:

31/05/2027

Model:

VM(.) 1 >> Size from 2 to 39 stages VM(.) 3 >> Size from 2 to 33 stages VM(.) 5 >> Size from 2 to 27 stages VM(.) 10 >> Size from 2 to 23 stages VM(.) 15 >> Size from 1 to 17 stages VM(.) 20 >> Size from 1 to 16 stages VM(.) 32 >> Size from 1 to 14 stages VM(.) 45 >> Size from 1 to 13 stages VM(.) 64 >> Size from 1 to 8 stages VM(.) 90 >> Size from 1 to 6 stages ( ) = VM >> AISI304 Components (L) = VM >> AISI316L Components (K*) = VM>> AISI304 + PRESSURE SENSOR (LK*) = VM >> AISI316L + PRESSURE SENSOR *K1 = DANFOSS MBS1900 *K2 = DANFOSS DST P 140 *K3 =SCHNEIDER XMLP0xxBD21F VM(.) 1-3 >> Available with Oval flange G1, Round Flange DN25, Loose round flange DN25, Victaulic DN32 and Clamp Ø59 VM(.) 5 >> Available with Oval flange G1¼, Round Flange DN32, Loose round flange DN32, Victaulic DN32 and Clamp Ø59. VM(.) 10 >> Available with Oval flange G1½, Round Flange DN40, Loose round flange DN40, Victaulic DN50 and Clamp Ø87. VM(.) 15-20 >> Available with Oval flange G2, Round Flange DN50, Loose round flange DN50, Victaulic DN50 and Clamp Ø87. VM(.) 32 >> Available with Loose round flange DN65. VM(.) 45 >> Available with Loose round flange DN80. VM(.) 64-90 >> Available with Loose round flange DN100. Model Bar VM( )1 2 16 VM( )1 3 16 VM( )1 4 16 VM( )1 5 16 VM( )1 6 16 VM( )1 7 16 VM( )1 8 16 VM( )1 9 16 VM( )1 10 16 VM( )1 11 16 VM( )1 12 16 VM()1 13 16 VM(L)1 14 16 VM( )1 16 16 VM( )1 18 16 VM( )1 20 16 VM( )1 22 16 VM( )1 24 16 VM( )1 26 16 VM( )1 27 25 VM( )1 29 25 VM( )1 32 25 VM( )1 34 25 VM( )1( 37 25 VM( )1 39 25 VM( )3 2 16 VM( )3 3 16 VM( )3 4 16 VM( )3 5 16 VM( )3 6 16 VM( )3 7 16 VM( )3 8 16 VM( )3 9 16 VM( )3 10 16 VM( )3 11 16 VM( )3 12 16 VM( )3 13 16 VM( )3 14 16 VM( )3 15 16 VM( )3 16 16 VM( )3 17 16 VM( )3 19 16 VM( )3 21 16 VM( )3 23 25 VM( )3 25 25 VM( )3 27 25 VM( )3 29 25 VM( )3 31 25 VM( )3 33 25 VM( )5 2 16 VM( )5 3 16 VM( )5 4 16 VM( )5 5 16 VM( )5 6 16 VM( )5 7 16 VM( )5 8 16 VM( )5 9 16 VM( )5 10 16 VM( )5 11 16 VM( )5 12 16 VM( )5 13 16 VM( )5 14 16 VM( )5 15 16 VM( )5 17 16 VM( )5 19 25 VM( )5 20 25 VM( )5 23 25 VM( )5 25 25 VM( )5 27 25 VM( )10 2 16 VM( )10 3 16 VM( )10 4 16 VM( )10 5 16 VM( )10 6 16 VM( )10 7 16 VM( )10 8 16 VM( )10 9 16 VM( )10 10 16 VM( )10 11 16 VM( )10 12 16 VM( )10 14 16 VM( )10 15 16 VM( )10 16 25 VM( )10 18 25 VM( )10 19 25 VM( )10 21 25 VM(L)10 22 25 VM( )10 23 25 VM( )15 1 16 VM( )15 2 16 VM( )15 3 16 VM( )15 4 16 VM( )15 5 16 VM( )15 6 16 VM( )15 7 16 VM( )15 8 16 VM( )15 9 16 VM( )15 10 16 VM( )15 11 16 VM( )15 12 25 VM( )15 13 25 VM( )15 15 25 VM( )15 17 25 VM()20 1 16 VM( L)20 2 16 VM( )20 3 16 VM( )20 4 16 VM( )20 5 16 VM( )20 6 16 VM( )20 7 16 VM( )20 8 16 VM( )20 9 16 VM( )20 10 25 VM( )20 11 25 VM( )20 12 25 VM( )20 13 25 VM( )20 14 25 VM( )20 15 25 VM( )20 16 25 VM( )32 1-1 16EVMS( )32 1-0 16 VM( )32 2-2 16 VM( )32 2-0 16 VM( )32 3-2 16 VM( )32 3-0 16 VM( )32 4-2 16 VM( )32 4-0 16 VM( )32 5-2 16 VM( )32 5-0 16 VM( )32 6-2 16 VM( )32 6-0 16 VM( )32 7-2 16 VM( )32 7-0 16 VM( )32 8-2 25 VM( )32 8-0 25 VM( )32 9-2 25 VM( )32 9-1 25 VM( )32 10-2 25 VM( )32 10-0 25 VM( )32 11-2 25 VM( )32 11-1 25 VM(L)32 12-2 30 VM(L)32 12-0 30 VM( )32 13-2 30 VM( )32 13-0 30 VM( )32 14-2 30 VM( )32 14-0 30 VM( )45 1-1 16 VM( )45 1-0 16 VM( )45 2-2 16 VM( )45 2-0 16 VM( )45 3-2 16 VM( )45 3-0 16 VM( )45 4-2 16 VM( )45 4-0 16 VM( )45 5-2 16 VM( )45 5-0 16 VM( )45 6-2 25 VM( )45 6-0 25 VM( )45 7-2 25 VM( )45 7-0 25 VM( )45 8-2 25 VM( )45 8-0 25 VM( )45 9-2 25 VM( )45 9-0 25 VM( )45 10-2 35 VM( )45 10-0 35 VM( )45 11-2 35 VM( )45 11-0 35 VM( )45 12-2 35 VM( )45 12-0 35 VM( )45 13-2 35 VM( )64 1-1 16 VM( )64 1-0 16 VM( )64 2-2 16 VM( )64 2-1 16 VM( )64 2-0 16 VM( )64 3-2 16 VM( )64 3-1 16 VM( )64 3-0 16 VM( )64 4-2 16 VM( )64 4-1 16 VM( )64 4-0 16 VM( )64 5-2 16 VM( )64 5-1 16 VM( )64 5-0 16 VM( )64 6-2 25 VM( )64 6-1 25 VM( )64 6-0 25 VM( )64 7-2 25 VM( )64 7-1 25 VM( )64 7-0 25 VM( )64 8-2 25 VM( )64 8-1 25 VM( )90 1-1 16 VM( )90 1-0 16 VM( )90 2-2 16 VM(L)90 2-0 16 VM(L)90 3-2 16 VM(L)90 3-0 16 VM(L)90 4-2 16 VM( )90 4-0 16 VM( )90 5-2 25 VM( )90 5-0 25 VM( )90 6-2 25 VM( )90 6-0 25

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of hand shower sets comprising of a wall mounted elbow, shower hose, shower handset and shower holder. The shower handset has a chrome plated plastic body and the inlet incorporates a stainless steel strainer and approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The elbow incorporates a quarter turn ceramic disc headwork with dome type operating member and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2207026

Size:

½” BSP (M)

Marking:

Dornbracht on shower handset

Installation Requirements:

R001 R040

Expiry date:

31/07/2027

Model:

27809980 & 27809985

Product Images

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Range of disposable shower kits, consisting of shower handset and shower hose with EPDM ‘O’-rings. Maximum operating temperature 65.0°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2207910

Note:

Open outlet use only.

Size:

½” BSP (F) conical nuts

Marking:

DELABIE on shower handset

Installation Requirements:

R001 R040

Expiry date:

31/07/2027

Model:

808B 808Y 809B 809Y

Approval Holder:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Manufacturer:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company