Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #260102725

Range of electronically controlled heat interface units (HIU) with a stainless-steel plate heat exchanger providing space heating and instantaneous hot water. The domestic hot water (secondary) circuit incorporates a pressure relief valve (set at 10.0 bar). The inlets and outlets of all circuits incorporate a T-handled spherical valve. Maximum working pressures: 10.0 bar (Primary circuit), 9.5 Bar (Secondary circuit). Maximum operating temperature 95°C. Cold supply only.

Section:: 1465 Heaters
Section Subtitle:: Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:: 260102725
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: IRN R511 applies to all spherical valves that can be used for draining the system down.
Size:: 1½” BSP (M).
Marking:: Oventrop Logo on body.
Installation Requirements:: R001 R140 R360 R511
Expiry date:: 31/01/2031
Proviso:: Not supplied with a temporary filling loop. A filling loop must be installed with the appropriate backflow prevention device in accordance with Schedule 2 paragraph 7 of the Water Supply (Water Fittings) Regulations 1999.
Model:: 1681580 - Requmaq X-80, 1681480 - Requmaq X-70.

Approval Holder:: Oventrop GmbH & Co KG

Company Name
Oventrop GmbH & Co KG
Address
Paul-Oventrop-Strasse 1, 59939 Olsberg
Country
Germany

View All Listings by this Company

WRAS Approval Number: #260102723

Range of pressure transmitters with stainless steel bodies. Maximum working pressure 100.0 Bar Maximum operating temperature 80.0°C (Type 540) or 100.0°C (Type 520 & Type 522)

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models
Marking:: Huba Control logo and technical info on body
Installation Requirements:: R001
Expiry date:: 31/01/2031
Model:: Type 520: Dimension, Sealing type, Male/Female Thread 7/16"-20 UNF, sealing cone 45°, Female 7/16"-20 UNF, sealed at front ISO 11926-1 Male G1/4", sealed at front, Female 1/2"-14 NPT, thread sealing, Male 1/2"-14 NPT, thread sealing, Female 7/16"-20 UNF, sealing cone 45°, Male G1/8", sealed at front, Male G1/4", sealed at back without sealing groove, Male G1/4", sealed at back ISO 1179-2, Male G1/4", sealed at back + Manometer, Male G1/4", sealed at front, Female G1/4", sealed at front + Manometer, Male G1/4", sealed at back DIN 3852-2, Male R1/4", thread sealing EN 10226, Male G1/2", sealed at front, Male M20x1.5, sealed at front + Manometer, Male 7/16"-20 UNF, sealing cone with schrader, Female Type 522: Dimension, Sealing type, Male/Female Thread 7/16"-20 UNF, sealing cone 45°, Female 1/2"-14 NPT, thread sealing, Female 7/16"-20 UNF, sealing cone 45°, Male G1/4", sealed at back ISO 1179-2, Male G1/4", sealed at back + Manometer, Male G1/2", sealed at front, Male G1/2", sealed at front + Manometer, Male M20x1.5, sealed at front + Manometer, Male Type 540: Dimension, Sealing type, Male/Female Thread G1/4", sealed at front, Female 7/16"-20 UNF, sealing cone 45°, Male G1/4", sealed at back ISO 1179-2, Male R1/4", thread sealing EN 10226, Male Additional Information The pressure orifice and the connectors are all made from stainless steel X2CrNiMo17-12-2/1.4404 / AISI316L. The Schrader is made from Stainless X8CrNi18-9/1.4305/303 All variants can use the following pressure cell options, based on application requirements: -1…9 Bar / 0…2.5 - 100 bar (Stainless Steel Cell X6Cr17-1.4016) The only difference between the models 520, 522 & 540 is the input and output signal, and the approvals (not relevant to WRAS) All the different type variants can be given a unique customer article number, to trace the full specification: Example: 520.99XXX 520 = Model Type 99 = Client / project specific number XXX = Unique file for client containing all the above options specified within model.

Manufacturer:: Huba Control AG

Company Name
Huba Control AG
Address
Industriestrasse 17, CH-5436 Wurenlos, Switzerland

View All Listings by this Company

WRAS Approval Number: #260115704

Range of flanged ball type non-return valves with blue epoxy coated ductile iron bodies, EPDM lined ductile iron balls, and EPDM gaskets. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 260115704
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: This device does not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. Therefore, not considered suitable for Backflow Protection.
Size:: DN80-DN500 flanged.
Marking:: KSB logo, KSB, model, DN, PN, material and production date (MM/YYYY) on data plate on body. DN, PN, KSB and flow arrow on body
Installation Requirements:: R001
Expiry date:: 31/01/2031
Model:: ECOLINE RPL.

Approval Holder:: KSB Valves (Changzhou) Co., Ltd.

Company Name
KSB Valves (Changzhou) Co., Ltd.
Address
Environment Protection Industrial Park, Xinbei District, 68 Huanbao Four Road, 213022 Changzhou, Jiangsu Province
Country
China

View All Listings by this Company
Manufacturer:: KSB Valves (Changzhou) Co., Ltd.

Company Name
KSB Valves (Changzhou) Co., Ltd.
Address
No.68 Huanbao Four Road, Xinbei District, Changzhou, Jiangsu Province
Country
China

View All Listings by this Company

WRAS Approval Number: #260202701

Range of rotary vane pumps with either brass, stainless-steel or plastic bodies, stainless steel impellor and EPDM ‘O’ rings. Maximum working pressure 20 Bar. Cold water use.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 260202701
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: Fluid-o-tech, Fluid-o-tech logo, model on label on body, Fluid-o-tech logo, flow arrow on body.
Installation Requirements:: R001
Expiry date:: 28/02/2031
Model:: 20 SERIES - BRASS VERSION TW030, TW031, TW034, TW034Z, TW050, TW051, TW054, TW054Z, TW070, TW071, TW074, TW074Z, TW100, TW101, TW104, TW104Z, TW150, TW151, TW154, TW154Z, TW180, TW181, TW184, TW184Z, TW200, TW201, TW204, TW204Z 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 20 SERIES - PLASTIC VERSION TWEP031, TWEP034, TWEP051, TWEP054, TWEP071, TWEP074, TWEP101, TWEP104, TWEP151, TWEP154, TWEP181, TWEP184, TWEP201, TWEP204, TWEP231, TWEP234 QUICK CONNECTION Ø14.5 MM 20 SERIES – INOX VERSION TW0310, TW0311, TW0314, TW0314Z, TW0510, TW0511, TW0514, TW0514Z, TW0710, TW0711, TW0714, TW0714Z, TW110, TW111, TW114, TW114Z, TW1510, TW1511, TW1514, TW1514Z, TW1810, TW1811, TW1814, TW1814Z, TW210, TW211, TW214, TW214Z, TW2310, TW2311, TW2314, TW2314Z 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 22 SERIES - BRASS VERSION PW070, PW070X, PW070F, PW070FX, PW071, PW071X, PW071F, PW071FX, PW074, PW074X, PW074F, PW074FX, PW074Z, PW074XZ, PW074FZ, PW074FXZ, PW100, PW100F, PW100X, PW100FX, PW101, PW101X, PW101F, PW101FX, PW104, PW104Z, PW104X, PW104XZ, PW104F, PW104FZ, PW104FX, PW104FXZ, PW150, PW150X, PW150F, PW150FX, PW151, PW151X, PW151F, PW151FX, PW154, PW154Z, PW154X, PW154XZ, PW154F, PW154FZ, PW154FX, PW154FXZ, PW200, PW200X, PW200F, PW201, PW201X, PW201F, PW201FX, PW204, PW204Z, PW204X, PW204XZ, PW204F, PW204FZ, PW204FX, PW204FXZ, PW250, PW250F, PW250X, PW254X, PW254XZ, PW254F, PW254FZ, PW254FX, PW254FXZ, PW300, PW300X, PW300F, PW300FX, PW301, PW301X, PW301F, PW301FX, PW304, PW304Z, PW304X, PW304XZ, PW304F, PW304FZ, PW304FX, PW304FXZ, PW350, PW350F, PW350X, PW350FX, PW351, PW351X, PW351F, PW351FX, PW354, PW354Z, PW354X, PW354XZ, PW354F, PW354FZ, PW354FX, PW354FXZ, PW400, PW400F, PW400X, PW400FX, PW401, PW401X, PW401F, PW401FX, PW404, PW404Z, PW404X, PW404XZ, PW404F, PW404FZ, PW404FX, PW404FXZ, RW070, RW070X, RW070F, RW070FX, RW071, RW071X, RW071F, RW071FX, RW074, RW074X, RW074F, RW074FX, RW074Z, RW074XZ, RW074FZ, RW074FXZ, RW100, RW100F, RW100X, RW100FX, RW101, RW101X, RW101F, RW101FX, RW104, RW104Z, RW104X, RW104XZ, RW104F, RW104FZ, RW104FX, RW104FXZ, RW150, RW150X, RW150F, RW150FX, RW151, RW151X, RW151F, RW151FX, RW154, RW154Z, RW154X, RW154XZ, RW154F, RW154FZ, RW154FX, RW154FXZ, RW200, RW200X, RW200F, RW201, RW201X, RW201F, RW201FX, RW204, RW204Z, RW204X, RW204XZ, RW204F, RW204FZ, RW204FX, RW204FXZ, RW250, RW250F, RW250X, RW250FX, RW251, RW251X, RW251F, RW251FX, RW254, RW254Z, RW254X, RW254XZ, RW254F, RW254FZ, RW254FX, RW254FXZ, RW300, RW300X, RW300F, RW300FX, RW301, RW301X, RW301F, RW301FX, RW304, RW304Z, RW304X, RW304XZ, RW304F, RW304FZ, RW304FX, RW304FXZ, RW350, RW350F, RW350X, RW350FX, RW351, RW351X, RW351F, RW351FX, RW354, RW354Z, RW354X, RW354XZ, RW354F, RW354FZ, RW354FX, RW354FXZ, RW400, RW400F, RW400X, RW400FX, RW401, RW401X, RW401F, RW401FX, RW404, RW404Z, RW404X, RW404XZ, RW404F, RW404FZ, RW404FX, RW404FXZPW250FX, PW251, PW251X, PW251F, PW251FX, PW254, PW254Z 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 22 SERIES – INOX VERSION PW0710, PW0710X, PW0710F, PW0710FX, PW0711, PW0711X, PW0711F, PW711FX, PW0714, PW0714Z, PW0714X, PW0714XZ, PW0714F, PW0714FZ, PW0714FX, PW0714FXZ, PW110, PW110X, PW110F, PW110FX, PW111, PW111X, PW111F, PW111FX, PW114, PW114Z, PW114X, PW114XZ, PW114F, PW114FZ, PW114FX, PW114FXZ, PW1510, PW1510X, PW1510F, PW1510FX, PW1511, PW1511X, PW1511F, PW1511FX, PW1514, PW1514Z, PW1514X, PW1514XZ, PW1514F, PW1514FZ, PW1514FX, PW1514FXZ, PW210, PW210X, PW210F, PW210FX, PW211, PW211X, PW211F, PW211FX, PW214, PW214Z, PW214X, PW214XZ, PW214F, PW214FZ, PW214FX, PW214FXZ, PW2510, PW2510X, PW2510F, PW2510FX, PW2511, PW2511X, PW2511F, PW2511FX, PW2514, PW2514Z, PW2514X, PW2514XZ, PW2514F, PW2514FZ, PW2514FX, PW2514FXZ, PW310, PW310X, PW310F, PW310FX, PW311, PW311X, PW311F, PW311FX, PW314, PW314Z, PW314X, PW314XZ, PW314F, PW314FZ, PW314FX, PW314FXZ, PW3510, PW3510X, PW3510F, PW3510FX, PW3511, PW3511X, PW3511F, PW3511FX, PW3514, PW3514Z, PW3514X, PW3514XZ, PW3514F, PW3514FZ, PW3514FX, PW3514FXZ, PW410, PW410X, PW410F, PW410FX, PW411, PW411X, PW411F, PW411FX, PW414, PW414Z, PW414X, PW414XZ, PW414F, PW414FZ, PW414FX, PW414FXZ, RW0710, RW0710X, RW0710F, RW0710FX, RW0711, RW0711X, RW0711F, RW711FX, RW0714, RW0714Z, RW0714X, RW0714XZ, RW0714F, RW0714FZ, RW0714FX, RW0714FXZ, RW110, RW110X, RW110F, RW110FX, RW111, RW111X, RW111F, RW111FX, RW114, RW114Z, RW114X, RW114XZ, RW114F, RW114FZ, RW114FX, RW114FXZ, RW1510, RW1510X, RW1510F, RW1510FX, RW1511, RW1511X, RW1511F, RW1511FX, RW1514, RW1514Z, RW1514X, RW1514XZ, RW1514F, RW1514FZ, RW1514FX, RW1514FXZ, RW210, RW210X, RW210F, RW210FX, RW211, RW211X, RW211F, RW211FX, RW214, RW214Z, RW214X, RW214XZ, RW214F, RW214FZ, RW214FX, RW214FXZ, RW2510, RW2510X, RW2510F, RW2510FX, RW2511, RW2511X, RW2511F, RW2511FX, RW2514, RW2514Z, RW2514X, RW2514XZ, RW2514F, RW2514FZ, RW2514FX, RW2514FXZ, RW310, RW310X, RW310F, RW310FX, RW311, RW311X, RW311F, RW311FX, RW314, RW314Z, RW314X, RW314XZ, RW314F, RW314FZ, RW314FX, RW314FXZ, RW3510, RW3510X, RW3510F, RW3510FX, RW3511, RW3511X, RW3511F, RW3511FX, RW3514, RW3514Z, RW3514X, RW3514XZ, RW3514F, RW3514FZ, RW3514FX, RW3514FXZ, RW410, RW410X, RW410F, RW410FX, RW411, RW411X, RW411F, RW411FX, RW414, RW414Z, RW414X, RW414XZ, RW414F, RW414FZ, RW414FX, RW414FXZ QUICK CONNECTION Ø14.5 MM 24 SERIES - BRASS VERSION CW031, CW034, CW034Z, CW051, CW054, CW054Z, CW071, CW074, CW074Z, CW101, CW104, CW104Z, CW151, CW154, CW154Z, CW181, CW184, CW184Z, CW201, CW204, CW204Z, CW231, CW234, CW234Z 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 24 SERIES - INOX VERSION CW0311, CW0314, CW0314Z, CW0511, CW0514, CW0514Z, CW0711, CW0714, CW0714Z, CW111, CW114, CW114Z, CW1511, CW1514, CW1514Z, CW1811, CW1814, CW1814Z, CW211, CW214, CW214Z, CW2311, CW2314, CW2314Z 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 26 SERIES - BRASS VERSION MW030, MW031, MW034, MW034Z, MW050, MW051, MW054, MW054Z, MW070, MW071, MW074, MW074Z, MW100, MW101, MW104, MW104Z, MW150, MW151, MW154, MW154Z, MW180, MW181, MW184, MW184Z, MW200, MW201, MW204, MW204Z, MW230, MW231, MW234, MW234Z 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 26 SERIES – INOX VERSION MW0310, MW0311, MW0314, MW0314Z, MW0510, MW0511, MW0514, MW0514Z, MW0710, MW0711, MW0714, MW0714Z, MW110, MW111, MW114, MW114Z, MW1510, MW1511, MW1514, MW1514Z, MW1810, MW1811, MW1814, MW1814Z, MW210, MW211, MW214, MW214Z, MW2310, MW2311, MW2314, MW2314Z 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 28 SERIES - BRASS VERSION PW500, PW500F, PW501, PW501F,, PW504, PW504F, PW600, PW600F, PW601, PW601F,, PW604, PW604F, PW700, PW700F, PW701, PW701F, PW704, PW704F, PW800, PW800F, PW801, PW801F,PW804, PW804F, PW900, PW900F, PW901, PW901F, PW904, PW904F, PW1000, PW1000F, PW1001, PW1001F, PW1004, PW1004F 1/2” BSP F inlet/outlet or 1/2” NPT F inlet/outlet 28 SERIES – INOX VERSION PW510, PW510F, PW511, PW511F, PW514, PW514F, PW610, PW610F, PW611, PW611F, PW614, PW614F, PW710, PW710F, PW711, PW711F, PW714, PW714F, PW810, PW810F, PW811, PW811F, PW814, PW814F, PW910, PW910F, PW911, PW911F, PW914, PW914F, PW1010, PW1010F, PW1011, PW1011F, PW1014, PW1014F 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 31 SERIES - BRASS VERSION TSFROT070AW, TSFROT071AW, TSFROT074AW, TSFROT100AW, TSFROT101AW, TSFROT104AW, TSFROT150AW, TSFROT151AW, TSFROT154AW, TSFROT200AW, TSFROT201AW, TSFROT204AW, TSFROT250AW, TSFROT251AW, TSFROT254AW, TSFROT300AW, TSFROT301AW, TSFROT304AW, TSFROT350AW, TSFROT351AW, TSFROT354AW, TSFROT400AW, TSFROT401AW, TSFROT404AW 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 31 SERIES – INOX VERSION TSFRSS070AW, TSFRSS071AW, TSFRSS074AW, TSFRSS100AW, TSFRSS101AW, TSFRSS104AW, TSFRSS150AW, TSFRSS151AW, TSFRSS154AW, TSFRSS200AW, TSFRSS201AW, TSFRSS204AW, TSFRSS250AW, TSFRSS251AW, TSFRSS254AW, TSFRSS300AW, TSFRSS301AW, TSFRSS304AW, TSFRSS350AW, TSFRSS351AW, TSFRSS354AW, TSFRSS400AW, TSFRSS401AW, TSFRSS404AW 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 32 SERIES - BRASS VERSION TMFROT030AW, TMFROT031AW, TMFROT034AW, TMFROT050AW, TMFROT051AW, TMFROT054AW, TMFROT070AW, TMFROT071AW, TMFROT074AW, TMFROT100AW, TMFROT101AW, TMFROT104AW, TMFROT150AW, TMFROT151AW, TMFROT154AW, TMFROT180AW, TMFROT181AW, TMFROT184AW, TMFROT200AW, TMFROT201AW, TMFROT204AW 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 32 SERIES – INOX VERSION TMFRSS030AW, TMFRSS031AW, TMFRSS034AW, TMFRSS050AW, TMFRSS051AW, TMFRSS054AW, TMFRSS070AW, TMFRSS071AW, TMFRSS074AW, TMFRSS100AW, TMFRSS101AW, TMFRSS104AW, TMFRSS150AW, TMFRSS151AW, TMFRSS154AW, TMFRSS180AW, TMFRSS181AW, TMFRSS184AW, TMFRSS200AW, TMFRSS201AW, TMFRSS204AW 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 33 SERIES - BRASS VERSION TW500, TW501, TW504, TW600, TW601, TW604, TW700, TW701, TW704, TW800, TW801, TW804, TW900, TW901, TW904, TW1000, TW1001, TW1004 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet 33 SERIES – INOX VERSION TW510, TW511, TW514, TW610, TW611, TW614, TW710, TW711, TW714, TW810, TW811, TW814, TW910, TW911, TW914, TW1010, TW1011, TW1014 1/2” BSP F inlet/outlet or 1/2” NPT F inlet/outlet 34 SERIES – INOX VERSION TW310, TW311, TW314, TW410, TW0411, TW0414 3/8” BSP F inlet/outlet or 3/8” NPT F inlet/outlet

Approval Holder:: Fluid-o-Tech

Company Name
Fluid-o-Tech
Address
Via Leonardo Da Vinci, 40 20094 - Corsico (Milano) Italy

View All Listings by this Company
Manufacturer:: Fluid-o-Tech

Company Name
Fluid-o-Tech
Address
Via Leonardo Da Vinci, 40 20094 - Corsico (Milano) Italy

View All Listings by this Company

WRAS Approval Number: #260103306

Section:: 1800 Taps
Description:: A Range of Pillar tap(s).
Deck mounted Capable of achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
VAL2 HNK FL5 C CD	Chrome (Cr6)	1/2" BSP (M)	5 bar	60 °C	Bristan	Operating member	No	1/4 Turn ceramic disc	Metal Backnuts	Flow Straightener	Flow Regulator Fitted,
VAL2 HNK C CD	Chrome (Cr6)	1/2" BSP (M)	5 bar	60 °C	Bristan	Operating member	No	1/4 Turn ceramic disc	Metal Backnuts	Flow Straightener
VAL2 HNK C 6 CD	Chrome (Cr6)	1/2" BSP (M)	5 bar	60 °C	Bristan	Operating member	No	1/4 Turn ceramic disc	Metal Backnuts	Flow Straightener
VAX HNK C	Chrome (Cr6)	1/2" BSP (M)	5 bar	60 °C	Bristan	Operating member	No	1/4 Turn ceramic disc	Metal Backnuts	Flow Straightener
VAC HNK C MT	Chrome (Cr6)	1/2" BSP (M)	5 bar	60 °C	Bristan	Operating member	No	1/4 Turn ceramic disc	Metal Backnuts	Flow Straightener
RP3 VAL2 HNK C 6 CD	Chrome (Cr3)	1/2" BSP (M)	5 bar	60 °C	Bristan	Operating member	No	1/4 Turn ceramic disc	Metal Backnuts	Flow Straightener
RP3 VAL2 HNK C CD	Chrome (Cr3)	1/2" BSP (M)	5 bar	60 °C	Bristan	Operating member	No	1/4 Turn ceramic disc	Metal Backnuts	Flow Straightener
RP3 VAX HNK C	Chrome (Cr3)	1/2" BSP (M)	5 bar	60 °C	Bristan	Operating member	No	1/4 Turn ceramic disc	Metal Backnuts	Flow Straightener
RP3 VAC HNK C MT	Chrome (Cr3)	1/2" BSP (M)	5 bar	60 °C	Bristan	Operating member	No	1/4 Turn ceramic disc	Metal Backnuts	Flow Straightener

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company