Directory Search Results

Print List

#240504722

Range of direct gas fired condensing storage water heaters with an enamel lining and a titanium anode. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:
1400 Heaters
Section Subtitle:
Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:
240504722
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Please refer to model.
Marking:
Lochinvar on control board.
Installation Requirements:
R001 R140
Expiry date:
31/05/2029
Model:
ECH 32-220 CE ECH 33-370 CE ECH 52-370 CE ECH 63-370 CE ECH 87-480 CE ECH 106-480 CE ECH 129-480 CE HWH 32-220 CE HWH 33-370 CE HWH 52-370 CE HWH 63-370 CE HWH 87-480 CE HWH 106-480 CE HWH 129-480 CE WATER HEATERS

Approval Holder:
Lochinvar Ltd.
Company Name
Lochinvar Ltd.
Address
8 Lombard Way The MXL Centre Banbury
Postcode
OX16 4TJ
Country
Oxon
Phone
+44 (0) 1295 269981
General Email
general@lochinvar.ltd.uk

View All Listings by this Company

Print This Approval


#240504723

Range of solar assisted direct gas fired condensing storage water heaters with an enamel lining and a titanium anode incorporating a solar heat exchanger (max. working pressure 6,0 bar). Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:
1400 Heaters
Section Subtitle:
Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.
WRAS Approval Number:
240504723
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1½” BSP(M) inlet.
Marking:
Lochinvar on control board.
Installation Requirements:
R001 R140
Expiry date:
31/05/2029
Model:
HWHC 44-370 CE HWHC 63-370 CE

Approval Holder:
Lochinvar Ltd.
Company Name
Lochinvar Ltd.
Address
8 Lombard Way The MXL Centre Banbury
Postcode
OX16 4TJ
Country
Oxon
Phone
+44 (0) 1295 269981
General Email
general@lochinvar.ltd.uk

View All Listings by this Company

Print This Approval


#240502715

Range of wall mounted combination boilers providing domestic hot water via a plate heat exchanger and pressurised central heating system. The primary circuit incorporates a pressure relief valve set at 3.0 bar and an expansion vessel. The products are supplied with isolation valve on both the DHW and CH circuits. The secondary circuit (DHW) incorporates a plastic flow restrictor and stainless-steel strainer. Some models (see model section) are supplied with a filling loop assembly consisting of an in-line isolation valve, an in-line double check valve assembly which incorporates an isolation valve. Maximum working pressures: DHW: 10.0 Bar CH: 2.5 Bar Maximum operating temperature: DHW: 65.0°C CH: 85.0°C

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
240502715
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DHW: 15mm compression. CH: 22mm compression
Marking:
Range name on front cover, Model, Max pressure, Max temperature and product information on data plate on body
Installation Requirements:
R001 R140 R360
Expiry date:
31/05/2029
Model:
Models without a filing loop supplied: 0010016113 - Glow-worm ESSENTIAL 24c -A (H-GB) 0010016115 - Glow-worm ESSENTIAL 28c -A (H-GB) 0010016127 - Heatline CAPRIZ 2 24c -A (H-GB) 0010016128 - Heatline MONZA 2 24c -A (H-GB) 0010016129 - Heatline CAPRIZ 2 28c -A (H-GB) 0010016130 - Heatline MONZA 2 28c -A (H-GB) 0010021401 - Glow-worm EASICOM 3 24c -A (H-GB) 0010021402 - Glow-worm EASICOM 3 28c -A (H-GB) 0010020392 - Vaillant VUW 256/6-3 (H-GB) ecoFIT sustain 825 0010020393 - Vaillant VUW 306/6-3 (H-GB) ecoFIT sustain 830 0010020394 - Vaillant VUW 356/6-3 (H-GB) ecoFITsustain 835 Models with a filling loop supplied: 0010020389 - Vaillant VUW 256/6-3 (H-GB) ecoFIT pure 825 0010020390 - Vaillant VUW 306/6-3 (H-GB) ecoFIT pure 830 0010020391 - Vaillant VUW 356/6-3 (H-GB) ecoFIT pure 835 0010019813 - Vaillant VUW 306/6-3 (P-GB) ecoFIT pure 830 P 0010021204 - Glow-worm BETACOM 4 24c -A (H-GB) 0010021205 - Glow-worm BETACOM 4 30c -A (H-GB) 0010021404 - Glow-worm ULTIMATE 3 30c -A (H-GB) 0010021405 - Glow-worm ULTIMATE 3 35c -A (H-GB) 0010027591 - Glow-worm ENERGY 2 30c -A (P-GB) 0010035896 - Glow-worm ENERGY 7 25c (H-GB) 0010035897 - Glow-worm ENERGY 7 30c (H-GB) 0010035898 - Glow-worm ENERGY 7 35c (H-GB)

Approval Holder:
Vaillant GmbH
Company Name
Vaillant GmbH
Address
Berghauser Strasse, 40 D-42859 Remscheid
Country
Germany
Phone
Tel: +49 2191 182126

View All Listings by this Company

Print This Approval


#240502720

Range of wall mounted combination boilers providing domestic hot water (DHW) via a plate heat exchanger and pressurised central heating (CH) system. Incorporating a pressure relief valve set at 3.0 bar and expansion vessel. Supplied with a filling loop assembly consisting of an in-line isolation valve, an in-line double check valve assembly which incorporates an isolation valve. Maximum working pressure Primary circuit (CH) 2.5Bar, Secondary circuit (DHW) 10.0 Bar Maximum operating temperature 90.0°C

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
240502720
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Primary circuit (CH) ¾” BSP (M), Secondary circuit (DHW) ½” BSP (M).
Marking:
NAVIEN on front of boiler. NAVIEN, Model Number, Max Pressure and other technical info on adhesive label on body
Installation Requirements:
R001 R140 R360
Expiry date:
31/05/2029
Model:
NCB300-28K NCB300-37K NCB300-41K Model added July 2024 NCB300-30K

Approval Holder:
KD Navien Co Ltd
Company Name
KD Navien Co Ltd
Address
4F Koami Bldg, 22 Gukhoe daero, 76-gil, Yeongdeungpo-gu, Seoul, 07238 Korea
Phone
+82 2 3489 2200
General Email
www.navien.com

View All Listings by this Company
Manufacturer:
KD Navien Co Ltd
Company Name
KD Navien Co Ltd
Address
4F Koami Bldg, 22 Gukhoe daero, 76-gil, Yeongdeungpo-gu, Seoul, 07238 Korea
Phone
+82 2 3489 2200
General Email
www.navien.com

View All Listings by this Company

Print This Approval


#240502051

Octave range of water meters with blue epoxy coated cast iron or plastic bodies (see models). Maximum working pressure 16.0 Bar. Maximum operating temperature 50.0°C

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
13905XXX & 13915XXX - Flow arrow on body. ARAD logo, DN, product information and model range on label under the plastic lid. 139XXXXX - Flow arrow and size on body. ARAD logo, product information and model range on label under the plastic lid.
Installation Requirements:
R001
Expiry date:
31/05/2029
Model:
OCTAVE range: 13905XXX (Composite Body, 2" BSP (M)) 13915XXX (Composite Body, 2.1/4" BSP (M)) 139XXXXX (Iron Body, 2” to 12”) 13905 & 13915: Where the XXX denotes customer specifications, e.g. flow rate, ration, packaging or logistic specifications. 139XXXXX: Where the 1st X denotes the size, and can be replaced with any of the following: 1 = 2” Flanged, 2 = 2.1/2” Flanged, 3 = 3” Flanged, 4 = 4” Flanged, 5 = 6” Flanged, 6 = 8” Flanged, 7 = 10” Flanged, 8 = 12” Flanged, Where the 2nd X denotes body type and customer specific and can be replaced with any of the following: 5 = Composite body, All other numbers = Customer specific Where the 3rd, 4th and 5th X’s denotes customer specifications, e.g. flow rate, ration, packaging or logistic specifications.

Approval Holder:
Arad GROUP Ltd.
Company Name
Arad GROUP Ltd.
Address
Kibbutz Dalia 1923900 Kibutzz Dalia
Country
Israel
Phone
+972-4-9897906
General Email
Dars@arad.co.il

View All Listings by this Company
Manufacturer:
Arad GROUP Ltd.
Company Name
Arad GROUP Ltd.
Address
Kibbutz Dalia 1923900 Kibutzz Dalia
Country
Israel
Phone
+972-4-9897906
General Email
Dars@arad.co.il

View All Listings by this Company

Print This Approval


#240502057

‘Helvatron H2O’ range of ultrasonic water meters with brass bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model.
Marking:
Helvatron on cap. Helvatron and product info on meter face. Size and flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/05/2029
Model:
Helvatron H2O range: H2O DN15 (port lengths 115 & 165mm): ¾” BSP (M) inlet/outlet, H2O DN20 (port lengths 130, 190 & 195mm): 1” BSP (M) inlet/outlet, H2O DN25 (port lengths 225 & 260mm): 1¼” BSP (M) inlet/outlet, H2O DN32 (port lengths 230 & 260mm): 1½” BSP (M) inlet/outlet, H2O DN40 (port lengths 245 & 300mm): 2” BSP (M) inlet/outlet.

Approval Holder:
Helvatron AG
Company Name
Helvatron AG
Address
JOCHLERWEG 2 CH-6340 BAAR SWITZERLAND

View All Listings by this Company

Print This Approval


#2312072

Arrangement of PVC-U pipe and fittings for use with the Orca System. Maximum working pressure 9.0 bar. Cold water use only.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2312072
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The Silver & Copper electrodes, flow sensor or control unit are not considered part of the approval.
Size:
1½” inlet x outlet.
Marking:
ProEconomy & Orca on adhesive label on body.
Installation Requirements:
R001
Expiry date:
31/12/2028
Model:
Orca manifold

Approval Holder:
ProEconomy Ltd.
Company Name
ProEconomy Ltd.
Address
23 Beaufort Court, Roebuck Way, Knowlhill, Milton Keynes
Postcode
MK5 8HL

View All Listings by this Company
Manufacturer:
ProEconomy Ltd.
Company Name
ProEconomy Ltd.
Address
23 Beaufort Court, Roebuck Way, Knowlhill, Milton Keynes
Postcode
MK5 8HL

View All Listings by this Company

Print This Approval


#240504017

Spray handset for personal hygiene (brass bodied - various finishes) incorporating a trigger mechanism controlling the flow. The handset also has a locking ring. The inlet incorporates an approved check valve cartridge with an integral plastic flow regulator; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower hose. Model (5840/MBG/W) is supplied with a single lever trim set. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
240504017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
THG laser etched on wall mounted bracket
Installation Requirements:
R001 R070 R415
Expiry date:
31/05/2029
Model:
5840/9/W & 5840/MBG/W

Approval Holder:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80
General Email
cvallee@thg.fr

View All Listings by this Company

Print This Approval


#240504018

Spray handset for personal hygiene (brass bodied - various finishes) incorporating a trigger mechanism controlling the flow. The handset also has a locking ring. The inlet incorporates an approved check valve cartridge with an integral plastic flow regulator; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
240504018
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M).
Marking:
THG etched on Body
Installation Requirements:
R001 R070 R415
Expiry date:
31/05/2029
Model:
G00-XXX-4270B/W. Where XXX denotes finishes and can be replaced by: A02-Polished Chrome, A13-Smoked Brass, B01-Polished Nickel, C01-Matte Nickel, C02-Matte Chrome, C27-Unlacquered Brass, C47-Smoked Nickel, D01-Light Bronze Lacquered, D05-Lacquered Matte Bronze, D10-USA Oil-Rubbed Bronze, D12-Polished Brass Lacquered, D15-Polished Black Lacquered, D16-White Lacquered, D18-Matte Black lacquered, D21-Old Oil-Rubbed Bronze, D24-Aranja, H17-Matt Aranja, F01-Polished Gold, F07-Matte Gold, F18-Rhodium Silver, F19-Matt Rhodium Silver, F27-Rose Gold, F30-Soft Gold, F31-Matte Soft Gold, F33-Brown Bronze PVD, F34-Matte Brown Bronze PVD, G01-Polished Nickel/Polished Gold, G02-Polished Chrome/Polished Gold, H03-Lacquered Antique Silver, H07-Varnished Matte Antique Red Copper, H08-Lacquered Matte Antique Silver, H24-Lacquered Antique Copper, H28-Antique Nickel, H49-Brass PVD, H50-Matte Brass PVD, H52-Gold PVD, H53-Matte Gold PVD, H55-Nickel PVD, H56-Matte Nickel PVD, H60-Matte Blush PVD, H62-Blush PVD, H64-Graphite PVD, H65-Matte Graphite PVD, H66-Umber PVD, H67-Matte Umber PVD

Approval Holder:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80
General Email
cvallee@thg.fr

View All Listings by this Company

Print This Approval


#240504702

‘Monsoon Standard’ range of single and twin ended shower booster pumps with brass bodies, brass impellers, EPDM seals and NBR ‘O’-rings. The inlet(s) of the pump body incorporate(s) a plastic strainer. Models with push fit connections include an integral isolation valve. Pushfit connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240504702
Note:
R007 & R009 applies to the 21mm & 22mm pushfit inlet/outlet hoses.
Size:
44428 - Monsoon S1.5 bar Twin EXIP model: ¾” BSP (M) (inlet/outlet). ROI suffix models: Stainless steel braided EPDM lined flexible hose assemblies incorporating 21mm push-fit end connections (inlet/outlet). EXP suffix models: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ¾” captive nut end connections (inlet/outlet). All other models: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating 22mm push-fit end connections (inlet/outlet).
Marking:
Stuart Turner, model no., serial no, part no., pressure rating, Monsoon, manufacturer’s address and other technical information on adhesive label on body.
Installation Requirements:
R001 R007 R009 R415
Expiry date:
31/05/2029
Model:
46420: Monsoon S4.5 bar Single, 46419: Monsoon S3.0 bar Single, 46418: Monsoon S4.5 bar Twin, 46417: Monsoon S4.0 bar Twin, 46416: Monsoon S3.0 bar Twin, 46415: Monsoon S2.0 bar Twin, 46506: Monsoon S1.5 bar Twin, 44754: Monsoon S1.5 bar Twin, 46497: Monsoon S2.0 bar Single, 44424: Monsoon S1.5 bar Twin, 44423: Monsoon S2.0 bar Twin, 44422: Monsoon S2.0 bar Single, 44428: Monsoon S1.5 bar Twin EXIP, 46420ROI: Monsoon S4.5 bar Single, 46419ROI: Monsoon S3.0 bar Single, 46418ROI: Monsoon S4.5 bar Twin, 46417ROI: Monsoon S4.0 bar Twin, 46416ROI: Monsoon S3.0 bar Twin, 46415ROI: Monsoon S2.0 bar Twin, 46506ROI: Monsoon S1.5 bar Twin, 46497ROI: Monsoon S2.0 bar Single, 46420EXP: Monsoon S4.5 bar Single, 46419EXP: Monsoon S3.0 bar Single, 46418EXP: Monsoon S4.5 bar Twin, 46417EXP: Monsoon S4.0 bar Twin, 46416EXP: Monsoon S3.0 bar Twin, 46415EXP: Monsoon S2.0 bar Twin, 46506EXP: Monsoon S1.5 bar Twin, 46497EXP: Monsoon S2.0 bar Single.

Approval Holder:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company
Manufacturer:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 243 of 445

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.