Directory Search Results

Print List

#2106019

Range of electrolytic scale reducers, with a chromium plated copper body and zinc alloy anodes. Maximum working pressure 5.0 bar. Cold water use only.

Section:
2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Size:
22mm compression Model added March 2022: ½” BSP (F)
Marking:
TrappeX on label on body.
Installation Requirements:
R001 R120 R150 R170 R290
Expiry date:
30/06/2026
Model:
Trappex Centrascale Electrolytic scale reducer 22mm Model added March 2022: Scalematic ½ inch electrolytic scale inhibitor

Approval Holder:
Trappex Ltd.
Company Name
Trappex Ltd.
Address
59 Springwood Hall Gardens, Huddersfield
Postcode
HD1 4HA
Country
United Kingdom
General Email
info@trappex.co.uk

View All Listings by this Company

Print This Approval


#2107067

Silver and copper disinfection ion generator with a plastic body, incorporating a plastic flow switch. Maximum working pressure 9.0 bar. For cold water use only

Section:
2415 Water conditioners - Disinfectant ion generators
WRAS Approval Number:
2107067
Note:
This product actively uses copper for microorganism control purposes. These are subject to the EU Biocidal Products Regulation EU 528/2012. The EU Commissions’ decision of 13 February and 26 June 2014 granted the UK limited essential use derogations only for the control of legionella and limits the range of applications where this product can be used. Users should ensure these types of products are used in accordance with the authorisations issued by the HSE. Users should refer to the HSE website to keep themselves up to date on progress or for further information – www.hse.org.uk/ legionnaires/faqs.htm
Size:
22mm spigot inlet & 22mm push fit outlet.
Marking:
ProEconomy Limited and Ray on adhesive label on body
Installation Requirements:
R001 R150 R170 R290 R415
Expiry date:
31/07/2026
Model:
Ray unit

Approval Holder:
ProEconomy Ltd.
Company Name
ProEconomy Ltd.
Address
23 Beaufort Court, Roebuck Way, Knowlhill, Milton Keynes
Postcode
MK5 8HL

View All Listings by this Company
Manufacturer:
ProEconomy Ltd.
Company Name
ProEconomy Ltd.
Address
23 Beaufort Court, Roebuck Way, Knowlhill, Milton Keynes
Postcode
MK5 8HL

View All Listings by this Company

Print This Approval


#2104073

Range of ion exchange water softeners (salt regenerated) for domestic use. Maximum working pressure 6.0 bar. Cold water use only.

Section:
2450 Water softeners
Size:
¾” BSP (M) inlet/outlet or 1” BSP (M) inlet/outlet
Marking:
Monarch Company details, model and other product info on adhesive label on rear of body. Model on front
Installation Requirements:
R001 R150 R170 R290 R415
Expiry date:
30/04/2026
Proviso:
Discharge to drain must be via a type `AA`, `AB` or `AD` air gap in accordance with EN1717.
Model:
Mini Aqua HE CS100HE PROSOFT100HE EVER 9 Midi HE CS150HE PROSOFT150HE EVER 12 Master HE CS200HE PROSOFT200HE EVER 18 Matrix HE CS300HE PROSOFT300HE EVER 30 PS12 HE PS15 HE GS4000 HE GS6000 HE LPS HE PROSOF 120 XE PROSOFT 120 XE PROSOF 160 XE PROSOFT 160 XE PROSOF 350 XE PROSOFT 350 XE SOF3000HE SOF6000HE

Approval Holder:
Monarch Water Ltd
Company Name
Monarch Water Ltd
Address
Fair Green Diss Norfolk
Postcode
IP22 4DG
Country
United Kingdom
Phone
01986 784759
General Email
kdelaney@monarchwater.co.uk

View All Listings by this Company

Print This Approval


#2111529

`CY9198`. Grey coloured, pressed and kilned carbon/graphite thrust ring. For use with water up to 85°C.

Section:
5022 Carbon
Expiry date:
30/11/2026

Approval Holder:
Morgan Carbon Italia Srl (Morgan Advanced Material)
Company Name
Morgan Carbon Italia Srl (Morgan Advanced Material)
Address
64014 Martinsicuro (Teramo), Via Roma 338
Country
Italy
Phone
+39 0861 7981 Fax: +39 0861 761860

View All Listings by this Company

Print This Approval


#2111517

'GMF-01'. Factory applied, grey coloured cement mortar. Mix sand, water & cement in a 1.5:1.0:1.0 weight ratio. Cure for 24 hours@25°C. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2111517
Expiry date:
30/11/2026

Approval Holder:
Gulf Meters Factory
Company Name
Gulf Meters Factory
Address
Al Dabab Street P.O. Box: 295408, Riyadh 11351
Country
Saudi Arabia
Phone
+96612175253

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 238 of 640

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.