Range of unvented heat pump storage cylinders which consist of an air-source heat pump sitting on top of the tank with either no internal coil (model numbers ending without S) or a factory fitted single internal coil (model numbers ending with S). The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar @ 90˚C and an stainless steel immersion heater and titanium alloy anode. The product is not supplied with an inlet control group (safety kit). Maximum operating temperature 70°C. Maximum working pressure (primary & secondary circuit) 5.5 bar.

Section:

1890 Unvented Heating Apparatus

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (F).

Marking:

Clivet on front panel. Clivet and product info on data label.

Installation Requirements:

R001 R140 R360

Expiry date:

30/11/2030

Model:

DSDH-P AQ 1 S 190 (185L), DSDH-P AQ 1 S 300 (275L), DSDH-P AQ 1 S 190S (180L), DSDH-P AQ 1 S 300S (270L).

Approval Holder:

Clivet S.p.A

Company Name

Clivet S.p.A

Address

Via Camp Lonc 25 32032 Z.I. Villapaiera Feltre (BL)

Country

Italy

Phone

+39 0439 3131

General Email

info@clivet.it

View All Listings by this Company

Range of wall mounted, manually operated, concealed shower valves (stainless steel bodies – various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. Maximum working pressure: 5.0 bar. Maximum operating temperature: 60°C.

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

251108005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” NPT (F).

Marking:

BAGNODESIGN on faceplate ring.

Installation Requirements:

R001 R010 R040

Expiry date:

30/11/2030

Model:

BDM-STU-410-XX Studio 316 wall mounted concealed shower mixer. XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C).

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

Country

United Kingdom

General Email

dan@sanipexgroup.com

View All Listings by this Company

Range of manually operated, concealed blending valves with brass body (various finishes) and ceramic cartridge headwork and single lever operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

251108007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

Coalbrook logo on the shroud.

Installation Requirements:

R001 R010 R040

Expiry date:

30/11/2030

Model:

XX 3005 YY. First two letters (e.g. XX) – These are replaced with letters representing the name of the trim (handles). The number of letters will depend on the name of the trim. Examples are, but not limited to: ZU - which represents the name Zurich. DO - which represents the name Domo. DC - which represents the name Decca. Middle four numbers (e.g. 3005) – This is the numeric code allocated to the model and remains constant. Last letters (e.g. YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the name of the finish. Examples are but not limited to: BN - Brushed Nickel, CP - Chrome, GM - Gunmetal, BB - Brushed Brass.

Approval Holder:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

Country

United Kingdom

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Wall mounted, concealed, thermostatic blending valve incorporating a thermostatic cartridge with a dome operating member and supplied with a trim set. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

251104012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

Keuco on body.

Installation Requirements:

R001 R010 R040

Expiry date:

30/11/2030

Model:

59554 xx00zz Trim set 59554 000170 – Rough part xx = 01 chrome plated; 02 polished bronze; 03 brushed bronze; 04 polished nickel; 05 brushed nickel; 07 stainless steel finish; 12 polished black chrome; 13 brushed black chrome; 17 aluminium finish; 37 black matt zz = 01 rosette round; 02 rosette squared; 21 as set with rosette round; 22 as set with rosette squared.

Approval Holder:

KEUCO GmbH & Co. KG

Company Name

KEUCO GmbH & Co. KG

Address

Oesestr. 36 Hemer

Postcode

58675

Country

Germany

Phone

+49 2372 / 904-265

General Email

info@keuco.de

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control

Wall Mounted. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Stainless Steel inter-locked shower hose with PVC lining.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

30/11/2030

Product Images

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company