Directory Search Results

Print List

#251215903

Section:
0683 Combination Tap Assemblies
Description:
A Range of Multiple Function tap(s). In addition to normal tap function includes at least one of following functions chilled, filtered, carbonated, instantaneous hot water.
Deck Mounted Additional Boiling, Chilled and Sparkling Water features Cold water function can also be activated via an Infra-red sensor. Stainless steel braided PEX lined inlet hoses Stainless steel braided PEX lined connection hoses Undefinable Air Gap - See IRN's
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R007 R009 R010 R090 R160
Expiry date:
31/12/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
24016**Various1/2" BSP (F)8 bar85 °CNLBOn bodyNoCeramic cartridgeC-plateAeratorInterconnecting Hoses,

Notes & Further Information

** represent different finishes No suffix: Chrome plated H: Black, N: Nickel brushed, GJS: Zirconium gold brushed, G: Zirconium gold, QTSL: Brushed bronze bright, QTS: Brushed bronze matte, TJ: Titanium gold, TJLS: Titanium gold brushed, MGJ: Rose gold, MGJL: Rose gold brushed, HGT: Red bronze, HTL: Yellow bronze brushed, HTS: Red bronze brushed, PVDQH: Gun grey, HQ: Gun grey brushed, Q: Bronze, DYB: Matte white, STS: Acid copper brushed, BZ: Spray pearl white, DMGJ: Light rose gold brushed.


Approval Holder:
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Company Name
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Address
JIAOXI INDUSTRIAL ZONE QINGGANG, YUHUAN TAIZHOU ZHEJIANG
Country
China

View All Listings by this Company
Manufacturers:
TAIZHOU NEW LANBIAO INTELLIGENT TECHNOLOGY CO.,LTD

Print This Approval


#251202017

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated stainless brass body). Flow is controlled by a solenoid valve and is activated via an infrared sensor. The spout outlets incorporate plastic aerators. Maximum working pressure 8.0 Bar Maximum operating temperature 60.0°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
251202017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The products are not supplied with anything to connect between the solenoid valves (15mm compression) and the copper tail (10mm), or the stainless-steel tail (10mm), or the flexible inlet hose (15mm spigot) this must be sourced by the installer. R007 applies only to models that are supplied with PEX lined connecting hose assemblies.
Size:
15mm compression inlets
Marking:
DVS logo on body
Installation Requirements:
R001 R006 R007
Expiry date:
31/12/2030
Model:
AT01-001 Classic tap spout in chrome with pex tails AT01-002 Classic tap spout in chrome with copper tails AT01-003 Classic tap spout only in chrome stainless tails AT01-011 Classic Swan tap spout in chrome with pex tails AT01-012 Classic Swan tap spout in chrome with copper tails AT01-013 Classic Swan tap spout only in chrome stainless tails

Approval Holder:
KWC DVS Ltd.
Company Name
KWC DVS Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Country
United Kingdom
Phone
01246 458 900
General Email
richard.lamb@kwc.com

View All Listings by this Company

Print This Approval


#251202710

Bottom entry or side entry BS1212-4 (2016) compact type float operated inlet valve for WC flushing cisterns with a plastic body and a plastic flow regulator at the inlet. Maximum working pressure 10.0 Bar Cold water use

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
251202710
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
IRN R560 applies to the bottom entry model only
Size:
½” BSP (M)
Marking:
NAT logo and BS1212-4 on float , datum level on valve body.
Installation Requirements:
R001 R550 R560
Expiry date:
31/12/2030
Model:
NA206 AG Bottom Fill Valve NA306 AG Side Fill Valve

Approval Holder:
Xiamen Nat Plumbing Inc.
Company Name
Xiamen Nat Plumbing Inc.
Address
UNIT 2, 5TH FLR. NO.18‐8 XIAFEI ROAD, HAICANG DISTRICT, 361028 XIAMEN, P. R. CHINA
Country
China
Phone
86-592-6538317

View All Listings by this Company

Print This Approval


#260101701

BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a dual flush Syphon of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
260101701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP Male
Marking:
Cap of Syphon marked ‘Cascade +’ or ‘Dudley Turbo’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. T. Dudley BS1212 part 3 on front face of back plate
Installation Requirements:
R001 R280
Expiry date:
31/01/2031
Model:
Slimline WC Cistern.

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#260101702

BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a dual flush Syphon of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a lever. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
260101702
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP M
Marking:
Cap of Syphon marked ‘Cascade +’ or ‘Dudley Turbo’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’. T. Dudley BS1212 part 3 on front face of back plate
Installation Requirements:
R001 R280
Expiry date:
31/01/2031
Model:
Mirage WC Cistern.

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#260101703

BS EN 14055: 2018 concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve and a dual or single flush pneumatic or dual flush cable operated drop valve capable of full flush volumes of up to 6 litres with a reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
260101703
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP Male or 15mm Push-fit Inlet connection.
Marking:
Splash cover marked Dudley. Top of Pneumatic drop valve is marked ‘Dudley’ Top of Cable Operated Drop Valve marked ‘Dudley’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
Installation Requirements:
R001 R280
Expiry date:
31/01/2031
Model:
OBC Concealed Cistern (Category 3)

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#260101705

BS EN 14055: 2018 concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve and a dual or single flush pneumatic or dual flush cable operated drop valve capable of full flush volumes of up to 6 litres with a reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
260101705
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP Male or 15mm Push-fit Inlet connection.
Marking:
Splash cover marked Dudley. Top of Pneumatic drop valve is marked ‘Dudley’ Top of Cable Operated Drop Valve marked ‘Dudley’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
Installation Requirements:
R001 R280
Expiry date:
31/01/2031
Model:
Element Cistern

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#260101704

BS EN 14055: 2018 concealed WC cistern incorporating a side entry compact type float operated inlet valve providing a Type AB air gap with a Pneumatic or Cable operated drop valve capable of full flush volumes of up to 6 litres and reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2034 Cistern - Flushing
Section Subtitle:
Incorporating Type AB air gap, providing fluid category 5 backflow protection. Suitable for use in a WC suite.
WRAS Approval Number:
260101704
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP Male or 15mm Push-fit Inlet connection.
Marking:
Splash cover marked Dudley. Top of Pneumatic drop valve is marked ‘Dudley’ Top of Cable Operated Drop Valve marked ‘Dudley’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
Installation Requirements:
R001 R280
Expiry date:
31/01/2031
Model:
OBC Concealed Cistern (Category 5).

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#251212304

Section:
1670 Shower Outlets
Description:
A Range of Shower kit(s)
Wall mounted.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001
Expiry date:
31/12/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
WJ 15212 CHChrome1/2BSP(M)Open outlet bar60 °CZHONGRUIYISHENGon the plateNo
WJ 23212BBRBrushed Brass1/2BSP(M)Open outlet bar60 °CZHONGRUIYISHENGon the plateNo
WJ 27212 BBLBrushed Black1/2BSP(M)Open outlet bar60 °CZHONGRUIYISHENGon the plateNo
WJ 28212 MBMatt Black1/2BSP(M)Open outlet bar60 °CZHONGRUIYISHENGon the plateNo
WJ 21212 BRZBrushed Bronze1/2BSP(M)Open outlet bar60 °CZHONGRUIYISHENGon the plateNo
WJ 32412 CHChrome1/2BSP(M)Open outlet bar60 °CZHONGRUIYISHENGon the plateNo
WJ 33412 BBRBrushed Brass1/2BSP(M)Open outlet bar60 °CZHONGRUIYISHENGon the plateNo
WJ 37412 BBLBrushed Black1/2BSP(M)Open outlet bar60 °CZHONGRUIYISHENGon the plateNo
WJ 38412 MBMatt Black1/2BSP(M)Open outlet bar60 °CZHONGRUIYISHENGon the plateNo
WJ 31412 BRZBrushed Bronze1/2BSP(M)Open outlet bar60 °CZHONGRUIYISHENGon the plateNo

Approval Holder:
ZHEJIANG ZHONG RUI YI SHENG TRADING CO., LTD
Company Name
ZHEJIANG ZHONG RUI YI SHENG TRADING CO., LTD
Address
Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave Jiaojiang District, Taizhou City Zhejiang Province
Postcode
318000
Country
CHINA
Phone
+86-576-88675561
General Email
weijoy@weijoy.cn

View All Listings by this Company
Manufacturers:
ZHEJIANG ZHONG RUI YI SHENG TRADING CO. LTD

Print This Approval


#251215312

Section:
2001 Shower Valves
Description:
A Range of Shower valve(s) with manual temperature control , incorporating a manual diverter between outlets.
Wall Mounted Concealed. Undefinable Air Gap – See IRN’s.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
WSH**VariousBSP 1/2(F)12 bar65 °CKindBodyNoCeramic cartridgeNot Applicable

Notes & Further Information

C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed


Approval Holder:
Guangzhou KIND Architecture Material Technology Co., Ltd.
Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 234 of 247

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.