Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2012087

Range of flow switches with brass bodies incorporating EPDM ‘O’-rings, acting as a leak detection system that actuates an integral spherical valve to shut off the water supply. The inlet incorporates a stainless steel strainer. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 30°C.

Section:: 1719 Flow Activated Switches
WRAS Approval Number:: 2012087
Note:: Cannot be used as the main stop valve into a premises. The fitting listed on this approval has been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed.
Size:: ¾”, 1” & 1¼” BSP (M) inlet/outlet.
Marking:: RELIANCE VALVES ON PLASTIC COVER
Installation Requirements:: R001
Expiry date:: 31/12/2025
Model:: LEKP100001 - ¾, LEKP100002 1” & LEKP100003 1¼ FLOW ACTIVATED SWITCHES

Product Images

Manufacturer:: Reliance Worldwide Corporation

Company Name
Reliance Worldwide Corporation
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060

View All Listings by this Company

WRAS Approval Number: #2012337

Range of pillar taps with brass bodies (various finishes) incorporating non-rising spindle headworks using either dome type or cross top operating members. Spout outlets incorporate plastic flow straighteners. The products are also supplied with metal back nuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:: 1800 Taps
Section Subtitle:: Pillar tap(s).
WRAS Approval Number:: 2012337
Size:: See model
Marking:: PPI on rear of body.
Installation Requirements:: R001 R005
Expiry date:: 31/12/2025
Model:: ½” BSP (M) 902001H 902001F 902001F PVD ¾” BSP (M) 902002H 902002F 902002F PVD

Product Images

Approval Holder:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

WRAS Approval Number: #2101027

Range of TPE and TPS lined flexible hose assemblies incorporating NBR ‘O’-rings and various end connections. Maximum operating temperature 60°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2101027
Note:: Open outlet use only.
Size:: see model
Marking:: IF logo, WRAS & date of manufacture (YY) on ferrule
Installation Requirements:: R001
Expiry date:: 31/01/2026
Model:: FPE2MX.SMWWYYYYZZZ FPF2MX.SLWWYYYYZZZ X denotes the fitting size, for example; A = ½” BSP (F) x ½” BSP (F) B = ½” BSP (F) x 15X1M F = ½ “ BSP (F) x 3/8” BSP (M) H = ½” BSP (F) x 3/8” BSP (F) I = 15X1M x 15X1M L = 15X1M x 3/8” BSP (M) M = 15X1M x 3/8” BSP (F) Q = 3/8” BSP (M) x 3/8” BSP (M) R = 3/8” BSP (M) x 3/8” BSP (F) S = 3/8” BSP (F) x 3/8” BSP (F) T = ½” BSP (F) x 12X1M U = ½” BSP (F) x 10x1M WW denotes the hose finish, for example; DK = Black (SL Model), PL = White (SL Model), CR = Chrome (SM Model), BN = Brushed Nickel (SM Model), RG = Red Gold (SM Model), GO = Gold (SM Model), BC = Black (SM Model). YYYY denotes the fitting finish, for example; ZZZ denotes then hose length, for example 050 = 500mm 200 = 2000mm

Approval Holder:: IL FLESSIBILE di Nicastri e C srl

Company Name
IL FLESSIBILE di Nicastri e C srl
Address
VIA FELICE VEDANI 16 INVORIO
Postcode
28045
Country
Italy
Phone
+39 335 5948283
General Email
g.buratti@ilflessibile.it

View All Listings by this Company
Manufacturer:: IL FLESSIBILE di Nicastri e C srl

Company Name
IL FLESSIBILE di Nicastri e C srl
Address
VIA FELICE VEDANI 16 INVORIO
Postcode
28045
Country
Italy
Phone
+39 335 5948283
General Email
g.buratti@ilflessibile.it

View All Listings by this Company

WRAS Approval Number: #2106046

Range of chromium plated brass interlocked shower hoses incorporating either a PVC or TPE inner hose and EPDM gaskets. Maximum operating temperature 60°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2106046
Note:: Open outlet use only.
Size:: ½” BSP Captive nut inlet x outlet.
Marking:: VADO on conical nut. Models: AX-SH-015-100-CP & AX-SH-015-150-DB-CP Axces by Vado on conical nut.
Installation Requirements:: R001
Expiry date:: 30/06/2026
Model:: H251200002S-03 SH-012-120-C/P (SH-012-120-DB-C/P) H251500002S-03 SH-012-150-CP (SH-012-150-DB-C/P) H252000002S-03 SH-012-200-C/P (SH-012-200-DB-C/P) H251000002S-05 SH-013-100-CP-LB H251500002S-05 SH-013-150-CP-LB (SH-013-150-DB-CP-LB) H252000002S-05 SH-013-200-CP-LB Model added AUGUST 22: AX-SH-015-100-CP AX-SH-015-150-DB-CP

Product Images

Approval Holder:: VADO

Company Name
VADO
Address
Cheddar Business Park Wedmore Road Cheddar
Postcode
BS27 3EB
Country
United Kingdom
Phone
01934 745895
General Email
tom.ross@vado.com

View All Listings by this Company

WRAS Approval Number: #2101355

‘Platinox SLP’ range of stainless steel braided silicone lined flexible hose assemblies with a variety of end connections (see size). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2101355
Size:: Hose Sizes DN6: Female elbow (captive nut) 15x1. Female (captive nut) ⅜”, ½”, 10x1, 16x1. Tube TL ø6 - ø15mm. Male MOK M6, M8, M10, M12, M16. Male M ⅜”, ½” BSP (M). Comp. joint ø10. Hose Sizes DN8: Female elbow (captive nut) ⅜”, ½”. Female (captive nut) ⅜”, ½”. Tube TL ø6 - ø15mm. Male MOK M10, M15. Male M ⅜” BSP (M). Comp. joint ø10. Hose Sizes DN10: Female elbow (captive nut) ½”, ¾”. Female (captive nut) ⅜”, ½”, ¾”. Tube TL ø15mm. Male MOK M12. Male M ⅜”, ½” BSP (M). Hose Sizes DN13: Female elbow (captive nut) ½”, ¾”. Female (captive nut) ½”, ¾”.
Marking:: Platinox SLP, NPI, WRAS, DN, max. temp, max. pressure and date of manufacture (YYMM) on crimped connector.
Installation Requirements:: R001 R008
Expiry date:: 31/01/2026
Model:: 39.03CD.EFG.HI 39 = Hose Type: supply hose. 03 = Hose (inliner) material: PLATINOX SLP CD.EFG = Manufacturing sequential number HI = Packaging information The same product can also be sold under the following code structure: AAA.BBBBBB.CCC AAA = braiding specification (all are stainless steel) DN6: X80, X88, X8B, X8R, XP8. DN8: PT7, X69, X7B, X7R, X81, X84, X87, XV7. DN10: X82, X85, XB2, XR2, XV5. DN13: X83, X86. BBBBBB = Manufacturing alphanumeric string. CCC = Length of the hose in mm, e.g. 500 = 500mm, U20 = 1200mm, D50 = 2500mm, T50 = 3500mm, Q00 = 4000mm.

Product Images

Approval Holder:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

WRAS Approval Number: #2103319

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2103319
Size:: DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:: Justlink (tradename of manufacturer) or 'Jianglin', WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/03/2026
Model:: JL – A*B – XX – D – E – XXX A*B denotes connection size and type and is replaced with a two digit number (please refer to size). XX denotes bore diameter of hose and is replaced with a two digit number (please refer to size). D denotes the outer braided material and is replaced with: SS = stainless steel wire, SN = stainless steel wire plus black nylon wire N = Nylon wire. E denotes the liner material and is replaced with 0 for EPDM. XXX denotes the length of the hose (15cm to 200cm) and is replaced with a number.

Product Images

Approval Holder:: Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road Yuhuan Economic Development Zone Yuhuan Zhejiang
Postcode
317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company
Manufacturer:: Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road Yuhuan Economic Development Zone Yuhuan Zhejiang
Postcode
317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company

WRAS Approval Number: #2012007

Range of stainless steel braided, EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2012007
Marking:: Novoflex, WRAS, and technical info on adhesive label located on hose. VIOSPIRAL PAT UNI , year of manufacture (YY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/12/2025
Model:: Novaflex inox flexible connecting hose DN10, F-F 1/2'' 00-800 Novaflex inox hose F-F DN10 1/2X1/2 , 20cm 00-801 Novaflex inox hose F-F DN10 1/2X1/2 , 25cm 00-802 Novaflex inox hose F-F DN10 1/2X1/2 , 30cm 00-803 Novaflex inox hose F-F DN10 1/2X1/2 , 35cm 00-804 Novaflex inox hose F-F DN10 1/2X1/2 , 40cm 00-805 Novaflex inox hose F-F DN10 1/2X1/2 , 45cm 00-806 Novaflex inox hose F-F DN10 1/2X1/2 , 50cm 00-807 Novaflex inox hose F-F DN10 1/2X1/2 , 60cm 00-808 Novaflex inox hose F-F DN10 1/2X1/2 , 70cm 00-809 Novaflex inox hose F-F DN10 1/2X1/2 , 80cm 00-810 Novaflex inox hose F-F DN10 1/2X1/2 , 90cm 00-811 Novaflex inox hose F-F DN10 1/2X1/2 , 100cm 00-812 Novaflex inox hose F-F DN10 1/2X1/2 , 120cm 00-813 Novaflex inox hose F-F DN10 1/2X1/2 , 150cm 00-814 Novaflex inox hose F-F DN10 1/2X1/2 , 200cm Novaflex inox flexible connecting hose monoforo DN8, M10x1 - F 1/2'' 00-835 Novaflex inox hose DN8 F-M 1/2xM10x1 30CM 00-836 Novaflex inox hose DN8 F-M 1/2xM10x1 40CM 00-837 Novaflex inox hose DN8 F-M 1/2xM10x1 50CM 00-838 Novaflex inox hose DN8 F-M 1/2xM10x1 60CM 00-839 Novaflex inox hose DN8 F-M 1/2xM10x1 80CM

Product Images

Approval Holder:: Viospiral SA

Company Name
Viospiral SA
Address
10 Kehagia Str AG I Rentis 18233
Country
Piraeus

View All Listings by this Company

WRAS Approval Number: #2012325

Range of EPDM braided hoses (various options) and optional end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2012325
Size:: See model
Marking:: PPI, WRAS & date of manufacture (YYYY) on crimp connector.
Installation Requirements:: R001
Expiry date:: 31/12/2025
Model:: DN8 bore diameter hose. BZG-A-B-C-XXXX Where A-B-C-XXXX can be replaced by the following options: BZG – Connection A - Connection B – Outer braided material – Length A-B Connection A and Connection B (from 01 to 13): 01=F1/2 02=F1/2 Conical Connection 03=F3/8 04=F3/4 05=15mm compression fitting (17-100) 06=F15 07= F10 08= M8*1 (L=12-100) 09= M10*1 (L=12-100) 10= M12*1 (L=12-100) 11= M12*1 (two O ring) 12= M14*1 13=T connection (L=2-110） C= Outer braided material: SS = stainless steel wire. NY= grey or black nylon wire. SR= stainless steel wire plus red nylon wire. SB= stainless steel wire plus blue nylon wire. NR= grey or black nylon wire plus red nylon wire. NB= grey or black nylon wire plus blue nylon wire. XXXX Length (15cm to 200cm): 0150=15cm 2000=200cm For example: BZG-01-09-SS-0450 would be for F1/2 x M10, stainless steel braided, 45cm long.

Product Images

Approval Holder:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

WRAS Approval Number: #2105038

Chrome plated interlocked stainless steel shower hose with an EPDM inner liner and EPDM gaskets. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2105038
Note:: Open outlet use only.
Size:: ½” BSP captive nut x ½” BSP captive nut.
Marking:: Kaiping Fushun Sanitary Ware Co., Ltd, WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/05/2026
Model:: FS001-shower hose (500mm-2000mm).

Product Images

Approval Holder:: Kaiping Fushun Sanitary Ware Co., Ltd

Company Name
Kaiping Fushun Sanitary Ware Co., Ltd
Address
The third card of the first building A6-3, The fourth industrial park, Shuikou Town, Kaiping City
Country
China
Phone
0750-2707296
General Email
382775085@qq.com

View All Listings by this Company
Manufacturer:: Kaiping Fushun Sanitary Ware Co., Ltd

Company Name
Kaiping Fushun Sanitary Ware Co., Ltd
Address
The third card of the first building A6-3, The fourth industrial park, Shuikou Town, Kaiping City
Country
China
Phone
0750-2707296
General Email
382775085@qq.com

View All Listings by this Company

WRAS Approval Number: #2108803

UWILL range of PVC and PEX lined shower hoses (model UW-MS1003 is PEX lined), (models UW-MS1003 and UW-MS1005) incorporate corrugated interlocking metal hoses with various finishes. All hoses incorporate EPDM washers. Maximum operating temperature 65°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2108803
Note:: Open outlet use only.
Size:: ½” captive nut end connections
Marking:: UWILL, WRAS, Year of manufacture (YYYY)
Installation Requirements:: R001
Expiry date:: 30/06/2026
Model:: UW-MS1003XX UW-MS1005XX UW-SC2003 End connector size for all models is G1/2 XX means the different outer finish ,XX=01,02,03,04,05,06： 01=CP chrom plating 02=EA electropolishing 03=Brushed nickel plating 04=ORB 05=matte black 06= Natural Brass

Approval Holder:: Xiamen Uwill Sanitary Ware Co. Ltd.

Company Name
Xiamen Uwill Sanitary Ware Co. Ltd.
Address
3rd Floor, No. 82th Building, Guankouzhonglu, Jimei District
Country
Xiamen,

View All Listings by this Company
Manufacturer:: Xiamen Uwill Sanitary Ware Co. Ltd.

Company Name
Xiamen Uwill Sanitary Ware Co. Ltd.
Address
3rd Floor, No. 82th Building, Guankouzhonglu, Jimei District
Country
Xiamen,

View All Listings by this Company