Range of balancing valves with bronze bodies and DZR brass bonnets. Maximum working pressure 20.0 bar. Maximum operating temperature 85⁰C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

250508003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Hattersley logo, PN, flow arrow, GM and size on body. Hattersley on handwheel.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

Fig 1432 - Double regulating valve ½”, ¾”, 1”, 1 ¼”, 1 ½” and 2” BSP 20.0 bar. Fig 1432L - Low flow double regulating valve ½” BSP 20.0 bar. Fig 1732 - Fixed orifice double regulating valve ½”, ¾”, 1”, 1 ¼”, 1 ½” and 2” BSP 20.0 bar. Fig 1732AT - Fixed orifice double regulating valve – American thread ½”, ¾”, 1”, 1 ¼”, 1 ½” and 2” 20.0 bar Fig 1732C - Fixed orifice double regulating valve – Compression 15mm and 22mm 16.0 bar. Fig 1732M - Medium flow fixed orifice double regulating valve ½” BSP 20.0 bar Fig 1732MC - Medium flow fixed orifice double regulating valve – Compression 15mm 16.0 bar Fig 1732L - Low flow fixed orifice double regulating valve ½” BSP 20.0 bar Fig 1732LC - Low flow fixed orifice double regulating valve – Compression 15mm 16.0 bar

Approval Holder:

Hattersley

Company Name

Hattersley

Address

11-15 Epsilon Terrace West Road Ipswich Suffolk

Postcode

IP3 9FJ

Country

United Kingdom

Phone

0766465023

General Email

tturner@cranebsu.com

View All Listings by this Company

Range of commercial dish washing machines. Flow is controlled by a solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure: 4.0 Bar. Maximum operating temperature: 60°C.

Section:

2390 Dishwasher(s)

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

PVC bodied appliance hose with an EPDM inner liner incorporating a ¾” BSP (F) captive nut end connection.

Marking:

DC Products logo on control panel. DC Products logo, model name and other technical information on adhesive label on side of body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

ED50A, ED900A, SD40A, SXD40A, SD45A, SD50A, SXD45A, SXD50A, PG/PD40A, PG/PD45A, PG/PD50A, OG/OD40A, OG/OD50A, X600A, X700A, W700A, W1100, W1400A, W1400SA, SD900A, SD1000A, SD1300A, SD1350A, PD1000A, PD1300A, PD1350A, OD1400A, OD1425A, OD1450A, DC57-42A, DC57-62A, DC67A, DC109A. Key: SD = Standard series dish, SXD = Standard extra dish, ED = ECONOMY SERIES DISH, PG/PD = Premium series glass/Premium range dish, OG/OD = Optima series glass/dish W or X = washrite range. DC = Direct Catering Range (the numbers for the DC range also represent basket size). The number 40, 45 and 50 numbers relate to the basket size. The numbers 600, 700, 900, 1000, 1100, 1350, 1400 are arbitrary number or once related to the pump sizes. Any model that has the letter ‘A’ immediately after the model number signifies that the break tank has been fitted. Additional suffixes of varying character may be present after the letter ‘A’, e.g. ‘PD50A D’ List of available suffixes: BPI – boost pump CP – chemical pumps D – Drain pump DL – lock DP – detergent pump DR – Dryer HR – recovery IS – Softener LT – Light RDP – rinse and detergent pumps RP – rinse pump SW – Saniwash TD – thermos Disinfection UV – UV light. All the above models have the same pathway.

Approval Holder:

DC Products Ltd

Company Name

DC Products Ltd

Address

Unit 25 lodge hill Industrial Park Westbury Sub Mendip Somerset

Postcode

BA5 1EY

View All Listings by this Company

Range of water conditioners with stainless steel bodies. AFL012 MFB has a matt black finish and AFL012MFC has a chrome plate finish. Models with compression connections are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C.

Section:

2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Activflo, model and PN on adhesive label.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

30/06/2030

Model:

AFL010 - Activflo Lite Water Conditioner - 1” BSP Male, AFL012 - Activflo Lite Water Conditioner - ½” BSP Male, AFL012MFB - Activflo Solo Lite - 1/2" MBSP X 1/2 FBSP, AFL012MFC - Activflo Solo Lite - 1/2" MBSP X 1/2" FBSP, AFL034 - Activflo Lite Water Conditioner- 3/4” BSP Male, AFL0112 - ACTIVFLO LITE - 1 1/2" X 1 1/2" MBSP, AFL0114 - ACTIVFLO LITE - 1 1/4" X 1 1/4" MBSP, AFL015 - Activflo Lite Water conditioner - 15mm x 15mm compression, AFL022 - Activflo Lite Water conditioner - 22mm x 22mm compression, AFL028 - Activflo Lite Water conditioner - 28mm x 28mm compression.

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

'Chromapoxy H.B.F.N.Paint Blue'. Factory applied, blue coloured, two-part epoxy coating. Mix base and accelerator in a 3:1 volume ratio and apply as per manufacturer's data sheet 'NCE/200', issue date '15.01.2014'. Cure for 7 days@32°C. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250655026

Expiry date:

30/06/2030

Approval Holder:

Nav Durga Chromatics Private Limited

Company Name

Nav Durga Chromatics Private Limited

Address

Jivan Nivas, 30A Block-R, New Alipore, 2nd Floor, Kolkata 700053

Country

India

Phone

+91 33 3254 6025/+91 98308 48300

General Email

navcoat@yahoo.co.in/navcoat@gmail.com

View All Listings by this Company

'TP14371'. Blue coloured polyethylene material manufactured by roto-moulding. For use with water up to 85°C.

Section:

5245 Polyethylene

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250555035

Expiry date:

31/05/2030

Approval Holder:

Prisma Colour Limited

Company Name

Prisma Colour Limited

Postcode

SK22 1AH

View All Listings by this Company