Range of commercial dish washing machines. Flow is controlled by a solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure: 4.0 Bar. Maximum operating temperature: 60°C.

Section:

2390 Dishwasher(s)

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

PVC bodied appliance hose with an EPDM inner liner incorporating a ¾” BSP (F) captive nut end connection.

Marking:

DC Products logo on control panel. DC Products logo, model name and other technical information on adhesive label on side of body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

ED50A, ED900A, SD40A, SXD40A, SD45A, SD50A, SXD45A, SXD50A, PG/PD40A, PG/PD45A, PG/PD50A, OG/OD40A, OG/OD50A, X600A, X700A, W700A, W1100, W1400A, W1400SA, SD900A, SD1000A, SD1300A, SD1350A, PD1000A, PD1300A, PD1350A, OD1400A, OD1425A, OD1450A, DC57-42A, DC57-62A, DC67A, DC109A. Key: SD = Standard series dish, SXD = Standard extra dish, ED = ECONOMY SERIES DISH, PG/PD = Premium series glass/Premium range dish, OG/OD = Optima series glass/dish W or X = washrite range. DC = Direct Catering Range (the numbers for the DC range also represent basket size). The number 40, 45 and 50 numbers relate to the basket size. The numbers 600, 700, 900, 1000, 1100, 1350, 1400 are arbitrary number or once related to the pump sizes. Any model that has the letter ‘A’ immediately after the model number signifies that the break tank has been fitted. Additional suffixes of varying character may be present after the letter ‘A’, e.g. ‘PD50A D’ List of available suffixes: BPI – boost pump CP – chemical pumps D – Drain pump DL – lock DP – detergent pump DR – Dryer HR – recovery IS – Softener LT – Light RDP – rinse and detergent pumps RP – rinse pump SW – Saniwash TD – thermos Disinfection UV – UV light. All the above models have the same pathway.

Approval Holder:

DC Products Ltd

Company Name

DC Products Ltd

Address

Unit 25 lodge hill Industrial Park Westbury Sub Mendip Somerset

Postcode

BA5 1EY

View All Listings by this Company

Range of water conditioners with stainless steel bodies. AFL012 MFB has a matt black finish and AFL012MFC has a chrome plate finish. Models with compression connections are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C.

Section:

2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Activflo, model and PN on adhesive label.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

30/06/2030

Model:

AFL010 - Activflo Lite Water Conditioner - 1” BSP Male, AFL012 - Activflo Lite Water Conditioner - ½” BSP Male, AFL012MFB - Activflo Solo Lite - 1/2" MBSP X 1/2 FBSP, AFL012MFC - Activflo Solo Lite - 1/2" MBSP X 1/2" FBSP, AFL034 - Activflo Lite Water Conditioner- 3/4” BSP Male, AFL0112 - ACTIVFLO LITE - 1 1/2" X 1 1/2" MBSP, AFL0114 - ACTIVFLO LITE - 1 1/4" X 1 1/4" MBSP, AFL015 - Activflo Lite Water conditioner - 15mm x 15mm compression, AFL022 - Activflo Lite Water conditioner - 22mm x 22mm compression, AFL028 - Activflo Lite Water conditioner - 28mm x 28mm compression.

Product Images

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Range of UV disinfection units with titanium bodies.

Section:

2411 Disinfection Equipment

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSPM, 2” BSFM, DN100, DN125, DN150.

Marking:

Brightwater logo, WRAS logo, operating parameters and model number on adhesive label.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

30/06/2030

Model:

Titanium AOP5, Titanium AOP10, Titanium AOP20, Titanium AOP50, Titanium AOP100.

Product Images

Approval Holder:

BrightWater Environmental Ltd

Company Name

BrightWater Environmental Ltd

Address

Redborough Barn, Stalisfield Green, Faversham

Postcode

ME13 0HX

Country

Kent.

General Email

sales@bwater.eu

View All Listings by this Company

'HP204AD'. Grey coloured carbon bearing, pressed, sintered, impregnated with phenolic resin and rebaked. For use with water up to 85°C.

Section:

5022 Carbon

Expiry date:

31/03/2030

Approval Holder:

Eurocarbo S.p.A

Company Name

Eurocarbo S.p.A

Address

Via S. Scolastica 35, Corropoli, 64013

Country

Italy

Phone

0861 839020

General Email

info@eurocarbo.it

View All Listings by this Company

'JDFF-OPC-01'. Factory applied, grey coloured Ordinary Portland Cement. Mix cement, sand & water in a 1:2:0.50 weight ratio and apply as per manufacturers Work Instruction 'WI-Pc-01-5', 'Issue #: 5 Revision #: 1', dated '10.01.2025'. Cure for 48 hours@23°C. For use with water up to 85°C. This material is only approved for the mixing & curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250655023

Expiry date:

30/06/2030

Approval Holder:

JDFF Ductile Fitting Factory

Company Name

JDFF Ductile Fitting Factory

Address

Dammam 34332 – 2708, 6736 – 2nd Industrial Area

Country

Saudi Arabia

View All Listings by this Company