Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #240955070

'70NB502S'. Black coloured, compression moulded NBR material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:: 5395 Rubbers
Section Subtitle:: Nitrile (Acrylonitrile Butadiene) material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 240955070
Expiry date:: 30/09/2029

Approval Holder:: Baodetec Rubber Tech (Fujian) Co., Ltd.

Company Name
Baodetec Rubber Tech (Fujian) Co., Ltd.
Address
No.47 Kunlun ountain Road, Zhang zhou Development Zone, Fujian
Country
China

View All Listings by this Company

WRAS Approval Number: #250355083

'ZL-001 (blue coloured) & ZL-002 (red coloured) O-ring'. Compression moulded silicone rubber 'O' rings. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:: 5410 Rubbers
Section Subtitle:: Silicone - components.
WRAS Approval Number:: 250355083
Expiry date:: 31/03/2030

Approval Holder:: Kaiping City Shuikou Town Zhongli Rubber Factory

Company Name
Kaiping City Shuikou Town Zhongli Rubber Factory
Address
A5-1 PanXing Road, Fourth Industrial Park, Shuikou Town, Kaiping City
Country
China

View All Listings by this Company

WRAS Approval Number: #250455040

'ergo 4207 (yellow coloured), 4205 (white coloured) & 4453 (green coloured)'. Anaerobic adhesives to be applied cured in strict accordance with the manufacturer's instructions. For use with water up to 85°C.

Section:: 5520 Sealants - Screwed Joints
Section Subtitle:: Anaerobic adhesives. These products are to be applied and cured in strict accordance with the manufacturer's instructions
WRAS Approval Number:: 250455040
Expiry date:: 30/04/2030

Approval Holder:: Kisling AG

Company Name
Kisling AG

View All Listings by this Company

WRAS Approval Number: #250455024

'Vyncolit BXE650W'. Black coloured, injection moulded phenolic material. For use with water up to 85°C.

Section:: 5580 Thermoset Phenolic Resins
Expiry date:: 30/04/2030

Approval Holder:: Sumitomo Bakelite Europe (Ghent) NV

Company Name
Sumitomo Bakelite Europe (Ghent) NV
Address
Wiedauwkaai 6, B-9000 Gent
Country
Belgium
Phone
32-92950100

View All Listings by this Company

WRAS Approval Number: #250402051

Range of electronic, touch free, wall-mounted taps (chromium plated brass. The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 Bar Maximum operating temperature 65.0°C

Section:: 0684 Combination Tap Assemblies
Section Subtitle:: Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:: 250402051
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 3/4" BSP (M) x 1/2" BSP (M) offset unions
Marking:: STERN logo on body
Installation Requirements:: R001 R040
Expiry date:: 30/04/2030
Model:: 314500 – Apollo Medical B 314510 – Apollo Medical E 314520 – Apollo Medical FB 314540 – Apollo Medical FE 314505 – Apollo Medical B LF 314515 – Apollo Medical E LF 314535 – Apollo Medical FB LF 314545 – Apollo Medical FE LF 314600 – Medical 1000TE 314605 – Medical 1000TE LF 314610 – Medical 1000 TMV E

Approval Holder:: Y. Stern Engineering (1989) Ltd

Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company