‘Hansen easy fit’ range of polypropylene compression fittings with EPDM ‘O’-rings for use with metric PE80 (20mm-63mm) and PE100 (32mm-110mm) pipe to AS/NZS:4130 and plastic pipe inserts. For above and below ground use. Maximum working pressure: See models. Maximum operating temperature: Cold water use only.

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240504011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Hansen, size, date of manufacture on body of fitting.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

HMDE20 20mm Elbow 16 bar. HMDE25 25mm Elbow 16 bar. HMDE32 32mm Elbow 16 bar. HMDE40 40mm Elbow 16 bar. HMDE50 50mm Elbow 16 bar. HMDE63 63mm Elbow 16 bar. HMDE75 75mm Elbow 12.5 bar. HMDE90 90mm Elbow 12.5 bar. HMDE110 110mm Elbow 12.5 bar. HMDEC20 20mm End Cap 16 bar. HMDEC25 25mm End Cap 16 bar. HMDEC32 32mm End Cap 16 bar. HMDEC40 40mm End Cap 16 bar. HMDEC50 50mm End Cap 16 bar. HMDEC63 63mm End Cap 16 bar. HMDEC75 75mm End Cap 12.5 bar. HMDEC90 90mm End Cap 12.5 bar. HMDEC110 110mm End Cap 12.5 bar. HMDFC2015 20mm x 1/2" Female Threaded Coupling 16 bar. HMDFC2020 20mm x 3/4" Female Threaded Coupling 16 bar. HMDFC2515 25mm x 1/2" Female Threaded Coupling 16 bar. HMDFC2520 25mm x 3/4" Female Threaded Coupling 16 bar. HMDFC2525 25mm x 1" Female Threaded Coupling 16 bar. HMDFC3220 32mm x 3/4" Female Threaded Coupling 16 bar. HMDFC3225 32mm x 1" Female Threaded Coupling 16 bar. HMDFC3232 32mm x 1-1/4" Female Threaded Coupling 16 bar. HMDFC4025 40mm x 1" Female Threaded Coupling 16 bar. HMDFC4032 40mm x 1-1/4" Female Threaded Coupling 16 bar. HMDFC4040 40mm x 1-1/2" Female Threaded Coupling 16 bar. HMDFC5032 50mm x 1-1/4" Female Threaded Coupling 16 bar. HMDFC5040 50mm x 1-1/2" Female Threaded Coupling 16 bar. HMDFC5050 50mm x 2" Female Threaded Coupling 16 bar. HMDFC6340 63mm x 1-1/2" Female Threaded Coupling 16 bar. HMDFC6350 63mm x 2" Female Threaded Coupling 16 bar. HMDFC6363 63mm x 2-1/2" Female Threaded Coupling 16 bar. HMDFC7550 75mm x 2" Female Threaded Coupling 12.5 bar. HMDFC7563 75mm x 2-1/2" Female Threaded Coupling 12.5 bar. HMDFC9050 90mm x 2" Female Threaded Coupling 12.5 bar. HMDFC9063 90mm x 2-1/2" Female Threaded Coupling 12.5 bar. HMDFC11050 110mm x 2" Female Threaded Coupling 12.5 bar. HMDFE2015 20mm x 1/2" Female Threaded Elbow 16 bar. HMDFE2020 20mm x 3/4" Female Threaded Elbow 16 bar. HMDFE2515 25mm x 1/2" Female Threaded Elbow 16 bar. HMDFE2520 25mm x 3/4" Female Threaded Elbow 16 bar. HMDFE2525 25mm x 1" Female Threaded Elbow 16 bar. HMDFE3220 32mm x 3/4" Female Threaded Elbow 16 bar. HMDFE3225 32mm x 1" Female Threaded Elbow 16 bar. HMDFE3232 32mm x 1-1/4" Female Threaded Elbow 16 bar. HMDFE4032 40mm x 1-1/4" Female Threaded Elbow 16 bar. HMDFE4040 40mm x 1-1/2" Female Threaded Elbow 16 bar. HMDFE5040 50mm x 1-1/2" Female Threaded Elbow 16 bar. HMDFE5050 50mm x 2" Female Threaded Elbow 16 bar. HMDFE6340 63mm x 1-1/ 2" Female Threaded Elbow 16 bar. HMDFE6350 63mm x 2" Female Threaded Elbow 16 bar. HMDFE7563 75mm x 2-1/2" Female Threaded Elbow 12.5 bar. HMDFT2015 20mm x 1/2" Female Threaded Tee 16 bar. HMDFT2020 20mm x 3/4" Female Threaded Tee 16 bar. HMDFT2515 25mm x 1/2" Female Threaded Tee 16 bar. HMDFT2520 25mm x 3/4" Female Threaded Tee 16 bar. HMDFT2525 25mm x 1" Female Threaded Tee 16 bar. HMDFT3215 32mm x 1/2" Female Threaded Tee 16 bar. HMDFT3220 32mm x 3/4" Female Threaded Tee 16 bar. HMDFT3225 32mm x 1" Female Threaded Tee 16 bar. HMDFT3232 32mm x 1-1/4" Female Threaded Tee 16 bar. HMDFT4025 40mm x 1" Female Threaded Tee 16 bar. HMDFT4032 40mm x 1-1/4" Female Threaded Tee 16 bar. HMDFT4040 40mm x 1-1/2" Female Threaded Tee 16 bar. HMDFT5032 50mm x 1-1/4" Female Threaded Tee 16 bar. HMDFT5040 50mm x 1-1/2" Female Threaded Tee 16 bar. HMDFT5050 50mm x 2" BSPT Female Threaded Tee 16 bar. HMDFT6340 63mm x 1-1/2" BSPT Female Threaded Tee 16 bar. HMDFT6350 63mm x 2" BSPT Female Threaded Tee 16 bar. HMDFT6363 63mm x 2-1/2" Female Threaded Tee 16 bar. HMDFT7550 75mm x 2" Female Threaded Tee 12.5 bar. HMDFT7563 75mm x 2-1/2" Female Threaded Tee 12.5 bar. HMDFT9063 90mm x 2-1/2" Female Threaded Tee 12.5 bar. HMDMC1620 16mm x 3/4" Male Threaded Coupling 16 bar. HMDMC2015 20mm x 1/2" Male Threaded Coupling 16 bar. HMDMC2020 20mm x 3/4" Male Threaded Coupling 16 bar. HMDMC2520 25mm x 3/4" Male Threaded Coupling 16 bar. HMDMC2525 25mm x 1" Male Threaded Coupling 16 bar. HMDMC3215 32mm x 1/2"Male Threaded Coupling 16 bar. HMDMC3220 32mm x 3/4" Male Threaded Coupling 16 bar. HMDMC3225 32mm x 1" Male Threaded Coupling 16 bar. HMDMC3232 32mm x 1-1/4" Male Threaded Coupling 16 bar. HMDMC3240 32mm x 1-1/2"Male Threaded Coupling 16 bar. HMDMC4025 40mm x 1" Male Threaded Coupling 16 bar. HMDMC4032 40mm x 1-1/4" Male Threaded Coupling 16 bar. HMDMC4040 40mm x 1-1/2" Male Threaded Coupling 16 bar. HMDMC4050 40mm x 2" Male Threaded Coupling 16 bar. HMDMC5032 50mm x 1-1/4" Male Threaded Coupling 16 bar. HMDMC5040 50mm x 1-1/2" Male Threaded Coupling 16 bar. HMDMC5050 50mm x 2" Male Threaded Coupling 16 bar. HMDMC6332 63mm x 1-1/4" Male Threaded Coupling 16 bar. HMDMC6340 63mm x 1-1/2" Male Threaded Coupling 16 bar. HMDMC6350 63mm x 2" Male Threaded Coupling 16 bar. HMDMC6363 63mm x 2-1/2" Male Threaded Coupling 16 bar. HMDMC7550 75mm x 2" Male Threaded Coupling 12.5 bar. HMDMC7563 75mm x 2-1/2" Male Threaded Coupling 12.5 bar. HMDMC9050 90mm x 2" Male Threaded Coupling 12.5 bar. HMDMC9063 90mm x 2-1/2" Male Threaded Coupling 12.5 bar. HMDMC11050 110mm x 2" Male Threaded Coupling 12.5 bar. HMDME2015 20mm x 1/2" Male Threaded Elbow 16 bar. HMDME2020 20mm x 3/4" Male Threaded Elbow 16 bar. HMDME2520 25mm x 3/4" Male Threaded Elbow 16 bar. HMDME2525 25mm x 1" Male Threaded Elbow 16 bar. HMDME3220 32mm x 3/4" Male Threaded Elbow 16 bar. HMDME3225 32mm x 1" Male Threaded Elbow 16 bar. HMDME3232 32mm x 1-1/4" Male Threaded Elbow 16 bar. HMDME4025 40mm x 1" Male Threaded Elbow 16 bar. HMDME4032 40mm x 1-1/4" Male Threaded Elbow 16 bar. HMDME4040 40mm x 1-1/2" Male Threaded Elbow 16 bar. HMDME5040 50mm x 1-1/2" Male Threaded Elbow 16 bar. HMDME5050 50mm x 2" Male Threaded Elbow 16 bar. HMDME6340 63mm x 1-1/2" Male Threaded Elbow 16 bar. HMDME6350 63mm x 2" Male Threaded Elbow 16 bar. HMDME6363 63mm x 2-1/2" Male Threaded Elbow 16 bar. HMDME7563 75mm x 2-1/2" Male Threaded Elbow 12.5 bar. HMDMT2015 20mm x 1/2" Male Threaded Tee 16 bar. HMDMT2020 20mm x 3/4" Male Threaded Tee 16 bar. HMDMT2515 25mm x 1/2" Male Threaded Tee 16 bar. HMDMT2520 25mm x 3/4" Male Threaded Tee 16 bar. HMDMT2525 25mm x 1" Male Threaded Tee 16 bar. HMDMT3220 32mm x 3/4" Male Threaded Tee 16 bar. HMDMT3225 32mm x 1" Male Threaded Tee 16 bar. HMDMT3232 32mm x 1-1/4" Male Threaded Tee 16 bar. HMDMT4025 40mm x 1" Male Threaded Tee 16 bar. HMDMT4032 40mm x 1-1/4" Male Threaded Tee 16 bar. HMDMT4040 40mm x 1-1/2" Male Threaded Tee 16 bar. HMDMT5040 50mm x 1-1/2" Male Threaded Tee 16 bar. HMDMT5050 50mm x 2" Male Threaded Tee 16 bar. HMDMT6340 63mm X 1-1/12" Male Threaded Tee 16 bar. HMDMT6350 63mm x 2" Male Threaded Tee 16 bar. HMDMT7563 75mm x 2-1/2" Male Threaded Tee 12.5 bar. HMDRBE2015 20mm x 1/2" Red. Bracket Elbow 16 bar. HMDRBE2515 25mm x 1/2" Red. Bracket Elbow 16 bar. HMDRBE2520 25mm x 3/4" Red. Bracket Elbow 16 bar. HMDRC2520 25mm x 20mm Reducing Straight Coupling 16 bar. HMDRC3220 32mm x 20mm Reducing Straight Coupling 16 bar. HMDRC3225 32mm x 25mm Reducing Straight Coupling 16 bar. HMDRC4025 40mm x 25mm Reducing Straight Coupling 16 bar. HMDRC4032 40mm x 32mm Reducing Straight Coupling 16 bar. HMDRC5032 50mm x 32mm Reducing Straight Coupling 16 bar. HMDRC5040 50mm x 40mm Reducing Straight Coupling 16 bar. HMDRC6332 63mm x 32mm Reducing Straight Coupling 16 bar. HMDRC6340 63mm x 40mm Reducing Straight Coupling 16 bar. HMDRC6350 63mm x 50mm Reducing Straight Coupling 16 bar. HMDRC7563 75mm x 63mm Reducing Straight Coupling 12.5 bar. HMDRC9063 90mm x 63mm Reducing Straight Coupling 12.5 bar. HMDRC9075 90mm x 75mm Reducing Straight Coupling 12.5 bar. HMDRC11075 110mm x 75mm Reducing Straight Coupling 12.5 bar. HMDRC11090 110mm x 90mm Reducing Straight Coupling 12.5 bar. HMDRSC20 20mm Repair Slip Coupling 16 bar. HMDRSC25 25mm Repair Slip Coupling 16 bar. HMDRSC32 32mm Repair Slip Coupling 16 bar. HMDRSC40 40mm Repair Slip Coupling 16 bar. HMDRSC50 50mm Repair Slip Coupling 16 bar. HMDRSC63 63mm Repair Slip Coupling 16 bar. HMDRSC75 75mm Repair Slip Coupling 12.5 bar. HMDRSC90 90mm Repair Slip Coupling 12.5 bar. HMDRSC110 110mm Repair Slip Coupling 12.5 bar. HMDRT2520 25mm x 25mm x 20mm Reducing Tee 16 bar. HMDRT3220 32mm x 32mm x 20mm Reducing Tee 16 bar. HMDRT3225 32mm x 32mm x 25mm Reducing Tee 16 bar. HMDRT4032 40mm x 40mm x 32mm Reducing Tee 16 bar. HMDRT5032 50mm x 50mm x 32mm Reducing Tee 16 bar. HMDRT5040 50mm x 50mm x 40mm Reducing Tee 16 bar. HMDRT6350 63mm x 63mm x 50mm Reducing Tee 16 bar. HMDRT7563 75mm x 75mm x 63mm Reducing Tee 12.5 bar. HMDRT9075 90mm x 90mm x 75mm Reducing Tee 12.5 bar. HMDRT11063 110mm x 110mm x 63mm Reducing Tee 12.5 bar. HMDRT11090 110mm x 110mm x 90mm Reducing Tee 12.5 bar. HMDC20 20mm Straight Coupling 16 bar. HMDC25 25mm Straight Coupling 16 bar. HMDC32 32mm Straight Coupling 16 bar. HMDC40 40mm Straight Coupling 16 bar. HMDC50 50mm Straight Coupling 16 bar. HMDC63 63mm Straight Coupling 16 bar. HMDC75 75mm Straight Coupling 12.5 bar. HMDC90 90mm Straight Coupling 12.5 bar. HMDC110 110mm Straight Coupling 12.5 bar. HMDT20 20mm Tee 16 bar. HMDT25 25mm Tee 16 bar. HMDT32 32mm Tee 16 bar. HMDT40 40mm Tee 16 bar. HMDT50 50mm Tee 16 bar. HMDT63 63mm Tee 16 bar. HMDT75 75mm Tee 12.5 bar. HMDT90 90mm Tee 12.5 bar. HMDT110 110mm Tee 12.5 bar.

Product Images

Approval Holder:

Hansen Products (NZ) Limited

Company Name

Hansen Products (NZ) Limited

Address

16 Union East Street Whangarei 0110 New Zealand

View All Listings by this Company

Manufacturer:

Hansen Products (NZ) Limited

Company Name

Hansen Products (NZ) Limited

Address

16 Union East Street Whangarei 0110 New Zealand

View All Listings by this Company

Range of M profile brass press fittings with EPDM ‘O’-rings or gaskets to be used with copper pipe manufactured to EN1057 for above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240604008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

Hailiang & size on body

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

EKYA00103 MALE CONNECTOR CXM - 15mmxR 1/2 EKYA00157 MALE CONNECTOR CXM - 15mmxR 3/4 EKYA00115 MALE CONNECTOR CXM - 22mmxR 1/2 EKYA00104 MALE CONNECTOR CXM - 22mmxR 3/4 EKYA00116 MALE CONNECTOR CXM - 22mmxR 1 EKYA00117 MALE CONNECTOR CXM - 28mmxR 3/4 EKYA00105 MALE CONNECTOR CXM - 28mmxR 1 EKYA00118 MALE CONNECTOR CXM - 35mmxR 1 EKYA00106 MALE CONNECTOR CXM - 35mmxR 1 1/4 EKYA00107 MALE CONNECTOR CXM - 42mmxR 1 1/2 EKYA00108 MALE CONNECTOR CXM - 54mmxR 2 EKYA00109 MALE CONNECTOR CXM - 66.7mmxR 2 1/2 EKYA00110 MALE CONNECTOR CXM - 76.1mmxR 2 1/2 EKYA00111 MALE CONNECTOR CXM - 76.1mmxR 3 EKYA00303 FEMALE CONNECTOR CXF - 15mmxRp 1/2 EKYA00357 FEMALE CONNECTOR CXF - 15mmxRp 3/4 EKYA00315 FEMALE CONNECTOR CXF - 22mmxRp 1/2 EKYA00304 FEMALE CONNECTOR CXF - 22mmxRp 3/4 EKYA00316 FEMALE CONNECTOR CXF - 22mmxRp 1 EKYA00317 FEMALE CONNECTOR CXF - 28mmxRp 3/4 EKYA00305 FEMALE CONNECTOR CXF - 28mmxRp 1 EKYA00318 FEMALE CONNECTOR CXF - 35mmxRp 1 EKYA00306 FEMALE CONNECTOR CXF - 35mmxRp 1 1/4 EKYA00307 FEMALE CONNECTOR CXF - 42mmxRp 1 1/2 EKYA00308 FEMALE CONNECTOR CXF - 54mmxRp 2 EKYA00309 FEMALE CONNECTOR CXF - 66.7mmxRp 2 1/2 EKYA00310 FEMALE CONNECTOR CXF - 76.1mmxRp 2 1/2 EKYA00311 FEMALE CONNECTOR CXF - 76.1mmxRp 3 EKYA10103 MALE ELBOW CXM - 15mmxR 1/2 EKYA10104 MALE ELBOW CXM - 22mmxR 3/4 EKYA10105 MALE ELBOW CXM - 28mmxR 1 EKYA10106 MALE ELBOW CXM - 35mmxR 1 1/4 EKYA10107 MALE ELBOW CXM - 42mmxR 1 1/2 EKYA10108 MALE ELBOW CXM - 54mmxR 2 EKYA10303 FEMALE ELBOW CXF - 15mmxRp 1/2 EKYA10304 FEMALE ELBOW CXF - 22mmxRp 3/4 EKYA10305 FEMALE ELBOW CXF - 28mmxRp 1 EKYA10306 FEMALE ELBOW CXF - 35mmxRp 1 1/4 EKYA10307 FEMALE ELBOW CXF - 42mmxRp 1 1/2 EKYA10308 FEMALE ELBOW CXF - 54mmxRp 2 EKYA10803 WALLPLATE ELBOW - 15mmxRp 1/2 EKYA10804 WALLPLATE ELBOW - 22mmxRp ¾ EKYA01003 UNION COUPLING CXC - 15mm EKYA01004 UNION COUPLING CXC - 22mm EKYA01005 UNION COUPLING CXC - 28mm EKYA01006 UNION COUPLING CXC - 35mm EKYA01007 UNION COUPLING CXC - 42mm EKYA01008 UNION COUPLING CXC - 54mm EKYA20303 FEMALE TEE CXCXF - 15mmx15mmxRp 1/2 EKYA20315 FEMALE TEE CXCXF - 22mmx22mmxRp 1/2 EKYA20304 FEMALE TEE CXCXF - 22mmx22mmxRp 3/4 EKYA20316 FEMALE TEE CXCXF - 28mmx28mmxRp 1/2 EKYA20317 FEMALE TEE CXCXF - 28mmx28mmxRp 3/4 EKYA20305 FEMALE TEE CXCXF - 28mmx28mmxRp 1 EKYA20318 FEMALE TEE CXCXF - 35mmx35mmxRp 1/2 EKYA20319 FEMALE TEE CXCXF - 35mmx35mmxRp 3/4 EKYA20320 FEMALE TEE CXCXF - 35mmx35mmxRp 1 EKYA20306 FEMALE TEE CXCXF - 35mmx35mmxRp 1 1/4 EKYA20321 FEMALE TEE CXCXF - 42mmx42mmxRp 1/2 EKYA20322 FEMALE TEE CXCXF - 42mmx42mmxRp 3/4 EKYA20323 FEMALE TEE CXCXF - 42mmx42mmxRp 1 EKYA20307 FEMALE TEE CXCXF - 42mmx42mmxRp 1 1/2 EKYA20324 FEMALE TEE CXCXF - 54mmx54mmxRp 1/2 EKYA20325 FEMALE TEE CXCXF - 54mmx54mmxRp 1 EKYA20308 FEMALE TEE CXCXF - 54mmx54mmxRp 2 EKYA01303 STRAIGHT SWIVEL CONNECTOR CXF - 15mmxG 1/2 EKYA01357 STRAIGHT SWIVEL CONNECTOR CXF - 15mmxG 3/4 EKYA01304 STRAIGHT SWIVEL CONNECTOR CXF - 22mmxG 3/4 EKYA01315 STRAIGHT SWIVEL CONNECTOR CXF - 22mmxG 1 EKYA01316 STRAIGHT SWIVEL CONNECTOR CXF - 28mmxG 1 1/4 EKYA01317 STRAIGHT SWIVEL CONNECTOR CXF - 35mmxG 1 1/2 EKYA01318 STRAIGHT SWIVEL CONNECTOR CXF - 42mmxG 2 EKYA01203 STRAIGHT MALE UNION CXM - 15mmxR 1/2 EKYA01257 STRAIGHT MALE UNION CXM - 15mmxR 3/4 EKYA01215 STRAIGHT MALE UNION CXM - 22mmxR 1/2 EKYA01204 STRAIGHT MALE UNION CXM - 22mmxR 3/4 EKYA01216 STRAIGHT MALE UNION CXM - 22mmxR 1 EKYA01217 STRAIGHT MALE UNION CXM - 28mmxR 3/4 EKYA01205 STRAIGHT MALE UNION CXM - 28mmxR 1 EKYA01206 STRAIGHT MALE UNION CXM - 35mmxR 1 1/4 EKYA01207 STRAIGHT MALE UNION CXM - 42mmxR 1 1/2 EKYA01208 STRAIGHT MALE UNION CXM - 54mmxR 2 EKYA01103 STRAIGHT FEMALE UNION CXF - 15mmxRp 1/2 EKYA01157 STRAIGHT FEMALE UNION CXF - 15mmxRp 3/4 EKYA01115 STRAIGHT FEMALE UNION CXF - 22mmxRp 1/2 EKYA01104 STRAIGHT FEMALE UNION CXF - 22mmxRp 3/4 EKYA01116 STRAIGHT FEMALE UNION CXF - 22mmxRp 1 EKYA01117 STRAIGHT FEMALE UNION CXF - 28mmxRp 3/4 EKYA01105 STRAIGHT FEMALE UNION CXF - 28mmxRp 1 EKYA01106 STRAIGHT FEMALE UNION CXF - 35mmxRp 1 1/4 EKYA01107 STRAIGHT FEMALE UNION CXF - 42mmxRp 1 1/2 EKYA01108 STRAIGHT FEMALE UNION CXF - 54mmxRp 2

Product Images

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Range of ‘Isiflo Sprint’ push fit fittings for use with PE100 pipe (manufactured in accordance with EN 12201), for above and below ground use. Isiflo Sprint Family fittings can be installed with seal liners, support liners and without any liner. Maximum working pressure 16 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240604032

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

Isiflo, size, flow arrow and date of manufacture (clock wheel)

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

8210052 Repkit IS 20mm (repair kit) 8210053 Repkit IS 25mm (repair kit) 8210054 Repkit IS 32mm (repair kit) 8210055 Repkit IS 40mm (repair kit) 8210056 Repkit IS 50mm (repair kit) 8210057 Repkit IS 63mm (repair kit) 8211002 100 20x20 IS Straight coupl 8211003 100 25x25 IS Straight coupl 8211004 100 32x32 IS Straight coupl 8211005 100 40x40 IS Straight coupl 8211006 100 50x50 IS Straight coupl 8211007 100 63x63 IS Straight coupl 8211020 102 63x32 IS Straight coupl 8211021 102 25x20 IS Straight coupl 8211022 102 32x25 IS Straight coupl 8211023 102 40x32 IS Straight coupl 8211024 102 50x40 IS Straight coupl 8211025 102 63x50 IS Straight coupl 8211026 102 32x20 IS Straight coupl 8211028 102 50x32 IS Straight coupl 8211053 105 25x1" IS Male coupl 8211054 105 32x1 1/4" IS Male coupl 8211055 105 40x1 1/2" IS Male coupl 8211056 105 50x2" IS Male coupl 8211058 105 32x1 1/2" IS Male coupl 8211059 105 32x2" IS Male coupl 8211102 110 20x1/2" IS Male coupl 8211103 110 25x3/4" IS Male coupl 8211104 110 32x1" IS Male coupl 8211105 110 40x1 1/4" IS Male coupl 8211106 110 50x1 1/2" IS Male coupl 8211107 110 63x2" IS Male coupl 8211124 112 32x3/4" IS Male coupl 8211125 112 40x1" IS Male coupl 8211126 112 50x1 1/4" IS Male coupl 8211128 112 32x1/2" IS Male coupl 8211153 115 25x1"IS Female coupl 8211154 115 32x1 1/4"IS Female coupl 8211160 116 50x1"IS Female coupl 8211161 116 40x1"IS Female coupl 8211162 116 20x1/2"IS Female coupl 8211163 116 25x3/4"IS Female coupl 8211164 116 32x1"IS Female coupl 8211165 116 40x1 1/4"IS Female coupl 8211166 116 50x1 1/2"IS Female coupl 8211167 116 63x2"IS Female coupl 8211169 116 32x3/4"IS Female coupl 8211202 120 20x20 IS Elbow 90° 8211203 120 25x25 IS Elbow 90° 8211204 120 32x32 IS Elbow 90° 8211205 120 40x40 IS Elbow 90° 8211206 120 50x50 IS Elbow 90° 8211207 120 63x63 IS Elbow 90° 8211212 121 20x1/2"IS Elbow male cou 8211213 121 25x3/4"IS Elbow male cou 8211214 121 32x1" IS Elbow Male coup 8211215 121 40x1 1/4"IS Elbow male 8211216 121 50x1 1/2"IS Elbow male 8211217 121 63x2"IS Elbow male coup 8211218 121 40x1 1/2"IS Elbow male 8211219 121 32x2" IS Elbow Male coup 8211220 122 25x1"IS Elbow FM 90° 8211221 122 32x1"IS Elbow FM 90° 8211223 122 25x3/4"IS Elbow FM 90° 8211224 122 32x1"IS Elbow FM 90° 8211225 122 40x1 1/4"IS Elbow FM 90° 8211226 122 50x1 1/2"IS Elbow FM 90° 8211227 122 63x2"IS Elbow FM 90° 8211228 122 50x1 1/2"IS Elbow FM 90° 8211229 122 25x3/4"IS Elbow FM 90° 8211234 123 32x32 IS Elbow45° 8211235 123 40x40 IS Elbow45° 8211236 123 50x50 IS Elbow45° 8211237 123 63x63 IS Elbow45° 8211245 124 40x1"IS Elbow Male90° 8211246 124 50x1 1/4"IS Elbow M 90° 8211252 125 20x20x20 IS Tee 8211253 125 25x25x25 IS Tee 8211254 125 32x32x32 IS Tee 8211255 125 40x40x40 IS Tee 8211256 125 50x50x50 IS Tee 8211257 125 63x63x63 IS Tee 8211323 132 25x3/4"x25 IS Tee 8211324 132 32x1"x32 IS Tee 8211325 132 40x1 1/4"x40 IS Tee 8211326 132 50x1 1/2"x50 IS Tee 8211328 132 63x2"x63 IS Tee 8211652 165 20 IS EndCap 8211653 165 25IS EndCap 8211654 165 32IS EndCap 8211655 165 40IS EndCap 8211656 165 50IS EndCap 8211657 165 63IS EndCap 8211802 180 20x2,0Støttehylse SDR11 8211803 180/181 25x2,3 Støttehylse S11 8211804 180 32x3,0Støttehylse SDR11 8211805 180 40x3,7Støttehylse SDR11 8211806 180 50x4,6Støttehylse SDR11 8211807 180 63x5,8Støttehylse SDR11 8211823 182 Seal Liner 25x2,3 8211824 182 Seal Liner 32x3,0 8211825 182 Seal Liner 40x3,7 8211826 182 Seal Liner 50x4,6 8211827 182 Seal Liner 63x5,8 8212293 229 25x25PE DoubleSwivel elbow 8212294 229 32x32PE DoubleSwivel elbow 8212295 229 40x40PE DoubleSwivel elbow 8212296 229 50x50PE DoubleSwivel elbow 8212297 229 63x63PE DoubleSwivel elbow 8216105 110 40x1 1/4"IS m/støttehylse 8216106 110 50x1 1/2"IS m/støttehylse 8216107 110 63x2"IS m/støttehylse 8011729 Muffe 1"R x 3/4"R kompositt 8011739 Muffe 11/2"G x 1"G kompositt 8011749 Muffe 2"Gx 1 1/2"G kompositt 8011516 Muffe 3/4"G kompositt 8011519 Muffe 1"G kompositt 8011523 Muffe 1 1/4"G kompositt 8011526 Muffe 1 1/2"G kompositt 8011533 Muffe 2"G kompositt 8211305 130 40x32x40 Tee

Product Images

Approval Holder:

Isiflo AS

Company Name

Isiflo AS

Address

Enggata 40 Postboks 143 2830 Raufoss Norway

View All Listings by this Company

Manufacturer:

Isiflo AS

Company Name

Isiflo AS

Address

Enggata 40 Postboks 143 2830 Raufoss Norway

View All Listings by this Company

SANHA Press Series 6000 & 16000 and PURAPRESS Series 8000 of press-fit fittings with copper (6000), bronze (8000) and chrome plated copper (16000) bodies and EPDM `O`-rings. For use with copper pipe manufactured in accordance with BS EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240602058

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Sizes are in mm Pressfit

Marking:

Sanha logo, Size and CuSi on body

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

SANHA Press Series 6000: SANHA-Press Bend 90° M/F: 16001A12: 12. 16001A14: 14. 16001A15: 15. 16001A16: 16. 16001A18: 18. 16001A22: 22. 16001A28: 28. 16001A35: 35. 16001A76: 76,1. 16001A89: 88,9. 16001A108: 108,0. 16001L15: 15. SANHA-Press Bend 90° F/F: 16002A12: 12. 16002A14: 14. 16002A15: 15. 16002A16: 16. 16002A18: 18. 16002A22: 22. 16002A28: 28. 16002A76: 76,1. 16002A89: 88,9. 16002A108: 108,0. SANHA-Press Bend 45° M/F: 1604012: 12. 1604014: 14. 1604015: 15. 1604016: 16. 1604018: 18. 1604022: 22. 1604028: 28. 1604076: 76,1. 1604089: 88,9. 16040108: 108,0. SANHA-Press Bend 45° F/F: 1604112: 12. 1604114: 14. 1604115: 15. 1604116: 16. 1604118: 18. 1604122: 22. 1604128: 28. 1604176: 76,1. 1604189: 88,9. 16041108: 108,0. SANHA-Press Full Crossover: 1608512: 12. 1608514: 14. 1608515: 15. 1608516: 16. 1608518: 18. 1608522: 22. 1608528: 28. SANHA-Press Partial crossover: 1608612: 12. 1608614: 14. 1608615: 15. 1608616: 16. 1608618: 18. 1608622: 22. 1608628: 28. SANHA-Press Tee: 1613012: 12. 1613014: 14. 1613015: 15. 1613016: 16. 1613018: 18. 1613022: 22. 1613028: 28. 1613076: 76,1. 1613089: 88,9. 16130108: 108,0. SANHA-Press Tee: 16130121512: 12x15x12. 16130141214: 14x12x14. 16130151212: 15x12x12. 16130151215: 15x12x15. 16130151512: 15x15x12. 16130151815: 15x18x15. 16130152215: 15x22x15. 16130161216: 16x12x16. 16130161414: 16x14x14. 16130161416: 16x14x16. 16130181215: 18x12x15. 16130181218: 18x12x18. 16130181418: 18x14x18. 16130181515: 18x15x15. 16130181518: 18x15x18. 16130181618: 18x16x18. 16130181815: 18x18x15. 16130182218: 18x22x18. 16130221222: 22x12x22. 16130221422: 22x14x22. 16130221515: 22x15x15. 16130221518: 22x15x18. 16130221522: 22x15x22. 16130221622: 22x16x22. 16130221815: 22x18x15. 16130221818: 22x18x18. 16130221822: 22x18x22. 16130222215: 22x22x15. 16130222218: 22x22x18. 16130222822: 22x28x22. 16130281428: 28x14x28. 16130281522: 28x15x22. 16130281528: 28x15x28. 16130281628: 28x16x28. 16130281822: 28x18x22. 16130281828: 28x18x28. 16130282222: 28x22x22. 16130282228: 28x22x28. 16130282815: 28x28x15. 16130282818: 28x28x18. 16130282822: 28x28x22. 16130283528: 28x35x28. 16130762276: 76,1x22x76,1. 16130762876: 76,1x28x76,1. 16130897689: 88,9x76,1x88,9. 1613010876108: 108,0x76,1x108,0. 1613010889108: 108,0x88,9x108,0. 16130L15: 15. SANHA-Press Reducing coupling: 162401412: 14x12. 162401512: 15x12. 162401514: 15x14. 162401614: 16x14. 162401812: 18x12. 162401814: 18x14. 162401815: 18x15. 162401816: 18x16. 162402214: 22x14. 162402215: 22x15. 162402216: 22x16. 162402218: 22x18. 162402815: 28x15. 162402818: 28x18. 162402822: 28x22. SANHA-Press Reducer: 162431412: 14ax12. 162431512: 15ax12. 162431612: 16ax12. 162431614: 16ax14. 162431812: 18ax12. 162431814: 18ax14. 162431815: 18ax15. 162431816: 18ax16. 162432214: 22ax14. 162432215: 22ax15. 162432216: 22ax16. 162432218: 22ax18. 162432815: 28ax15. 162432816: 28ax16. 162432818: 28ax18. 162432822: 28ax22. 162438976: 88,9ax76,1. 1624310876: 108,0ax76,1. 1624310889: 108,0ax88,9. SANHA-Press Coupling: 1627012: 12. 1627014: 14. 1627015: 15. 1627016: 16. 1627018: 18. 1627022: 22. 1627028: 28. 1627076: 76,1. 1627089: 88,9. 16270108: 108,0. SANHA-Press End Cap: 1630112: 12. 1630114: 14. 1630115: 15. 1630116: 16. 1630118: 18. 1630122: 22. 1630128: 28. 1630176: 76,1. 1630189: 88,9. 16301108: 108,0. SANHA-Press Slip coupling: 16270S12: 12. 16270S15: 15. 16270S18: 18. 16270S22: 22. 16270S28: 28. 16270S76: 76,1. 16270S89: 88,9. 16270S108: 108,0. SANHA-Press Coupling: 1627012: 12. 1627014: 14. 1627015: 15. 1627016: 16. 1627018: 18. 1627022: 22. 1627028: 28. 1627076: 76,1. 1627089: 88,9. 16270108: 108,0 Models added September 2024 PuraPress series 6000: SANHA-Press Bend 90° M/F: 16001A35: 35. 16001A42: 42. 16001A54: 54. 16001A64: 64. 16001A67: 67. SANHA-Press Bend 90° F/F: 16002A35: 35. 16002A42: 42. 16002A54: 54. 16002A64: 64. 16002A67: 67. SANHA-Press Bend 45° M/F: 1604035: 35. 1604042: 42. 1604054: 54. 1604064: 64. 1604067: 67. SANHA-Press Bend 45° F/F: 1604135: 35. 1604142: 42. 1604154: 54. 1604164: 64. 1604167: 67. SANHA-Press Tee: 1613035: 35. 1613042: 42. 1613054: 54. 1613064: 64. 1613067: 67. SANHA-Press Tee: 16130351535: 35x15x35. 16130351835: 35x18x35. 16130352222: 35x22x22. 16130352228: 35x22x28. 16130352235: 35x22x35. 16130352828: 35x28x28. 16130352835: 35x28x35. 16130353522: 35x35x22. 16130353528: 35x35x28. 16130421542: 42x15x42. 16130422242: 42x22x42. 16130422842: 42x28x42. 16130423535: 42x35x35. 16130423542: 42x35x42. 16130542254: 54x22x54. 16130542854: 54x28x54. 16130543554: 54x35x54. 16130544254: 54x42x54. 16130644264: 64x42x64. 16130645464: 64x54x64. 16130672867: 67x28x67. 16130673567: 67x35x67. 16130674267: 67x42x67. 16130675467: 67x54x67. 16130763576: 76,1x35x76,1. 16130764276: 76,1x42x76,1. 16130765476: 76,1x54x76,1. 16130766476: 76,1x64x76,1. 16130766776: 76,1x67x76,1. 16130895489: 88,9x54x88,9. 16130896489: 88,9x64x88,9. 1613010854108: 108,0x54x108,0. 1613010864108: 108,0x64x108,0. 1613010867108: 108,0x67x108,0. SANHA-Press Reducing coupling: 162403522: 35x22. 162403528: 35x28. 162404222: 42x22. 162404228: 42x28. 162404235: 42x35. 162405428: 54x28. 162405435: 54x35. 162405442: 54x42. SANHA-Press Reducer: 162433522: 35ax22. 162433528: 35ax28. 162434222: 42ax22. 162434228: 42ax28. 162434235: 42ax35. 162435435: 54ax35. 162435442: 54ax42. 162436442: 64ax42. 162436454: 64ax54. 162436728: 67ax28. 162436735: 67ax35. 162436742: 67ax42. 162436754: 67ax54. 162437635: 76,1ax35. 162437642: 76,1ax42. 162437654: 76,1ax54. 162437667: 76,1ax67. 162438954: 88,9ax54. 162438964: 88,9ax64. 1624310842: 108,0ax42. 1624310854: 108,0ax54. 1624310864: 108,0ax64. 1624310867: 108,0ax67. SANHA-Press Coupling: 1627035: 35. 1627042: 42. 1627054: 54. 1627064: 64. 1627067: 67. SANHA-Press Slip coupling: 16270S35: 35. 16270S42: 42. 16270S54: 54. 16270S64: 64. 16270S67: 67. SANHA-Press End Cap: 1630135: 35. 1630142: 42. 1630154: 54. 1630164: 64. 1630167: 67. SANHA-Press Crimping flange PN 10/16: 1BMPF42: DN 40 / 42 mm. 1BMPF54: DN 50 / 54 mm. 1BMPF67: DN -- / 66,7 mm. 1BMPF76: DN 65 / 76,1 mm. 1BMPF76_DN80: DN 80 / 76,1 mm. 1BMPF89: DN 80 / 88,9 mm. PuraPress series 8000: PURAPRESS Female elbow 90°: 18090221: 22x1. 18090281: 28x1. 1809035114: 35x11/4. 1809042112: 42x11/2. 18090542: 54x2. PURAPRESS Male elbow 90°: 18092221: 22x1. 18092281: 28x1. 1809235114: 35x11/4. 1809242112: 42x11/2. 18092542: 54x2. PURAPRESS Union elbow, flat sealing: 18096221: 22x1. 18096281: 28x1 1809635114: 35x11/4. 1809642112: 42x11/2. 18096542: 54x2. PURAPRESS Tee, female: 181303512: 35x1/2x35. 18130351: 35x1x35. 181304212: 42x1/2x42. 181305412: 54x1/2x54. PURAPRESS Male adaptor: 18243221: 22x1. 18243281: 28x1. 1824328114: 28x11/4. 18243351: 35x1. - 1824335114: 35x11/4. - 1824335112: 35x11/2. - 1824342114: 42x11/4. - 1824342112: 42x11/2. - 1824354112: 54x11/2. - 18243542: 54x2. - 1824364212: 64x21/2. - 1824367212: 67x21/2. - 1824376212: 76,1x21/2. -> PURAPRESS Plug-in adaptor, female: 18246281: 28ax1. 1824635114: 35ax11/4. 1824642112: 42ax11/2. 18246542: 54ax2. PURAPRESS Flow Check Coupling with 2 holes: 18270FC26712: 67x1/2. PURAPRESS Female adaptor: 18270221: 22x1. 18270281: 28x1. 1827028114: 28x11/4. 18270351: 35x1. 1827035114: 35x11/4. 1827035112: 35x11/2. 1827042114: 42x11/4. 1827042112: 42x11/2. 1827054112: 54x11/2. 18270542: 54x2. 1827064212: 64x21/2. 1827067212: 67x21/2. 1827076212: 76,1x21/2. PURAPRESS Plug-in adaptor, male: 18280221: 22ax1. 18280281: 28ax1. 1828035114: 35ax11/4. 1828042112: 42ax11/2. 18280542: 54ax2. PURAPRESS Union, flat sealing: 1833035: 35. 1833042: 42. 1833054: 54. THREADED PURAPRESS Union, female, flat seal.: 18330221: 22x1. 18330281: 28x1. 1833035114: 35x11/4. 1833042112: 42x11/2. 18330542: 54x2. PURAPRESS Union, male, flat sealing: 18333221: 22x1. 18333281: 28x1. 1833335114: 35x11/4. 1833342112: 42x11/2. 18333542: 54x2. PURAPRESS Union adaptor, flat seal.: 18359151: 15x1. 18359181: 18x1. 18359221: 22x1. 1835922114: 22x11/4. 1835922112: 22x11/2. 18359281: 28x1. 1835928114: 28x11/4. 1835928112: 28x11/2. 1835935112: 35x11/2. 18359352: 35x2. 1835942134: 42x13/4. 18359422: 42x2. 1835954238: 54x23/8. 18359763: 76,1x3. 1835989312: 88,9x31/2. PURAPRESS Flange PN10/16: 1PURAPF35: DN 32 / 35 mm. 1PURAPF42: DN 40 / 42 mm. 1PURAPF54: DN 50 / 54 mm. 1PURAPF64: DN -- / 64 mm. 1PURAPF67: DN -- / 67 mm. PuraPress series 16000: SANHA-Press Chrome Male adaptor: 116243G1212: 12x1/2. 116243G1512: 15x1/2. 116243G1812: 18x1/2. 116243G1834: 18x3/4. 116243G2212: 22x1/2. 116243G2234: 22x3/4. 116243G221: 22x1. 116243G2834: 28x3/4. 116243G281: 28x1 116243G28114: 28x11/4. SANHA-Press Chrome Female adaptor: 116270G1212: 12x1/2. 116270G1512: 15x1/2. 116270G1812: 18x1/2. 116270G1834: 18x3/4. 116270G2212: 22x1/2. 116270G2234: 22x3/4 116270G221: 22x1. 116270G2834: 28x3/4. 116270G281: 28x1. 116270G28114: 28x11/4. SANHA-Press Chrome Plug-in adaptor, male: 116280G1212: 12ax1/2. 116280G1512: 15ax1/2. 116280G1812: 18ax1/2. 116280G1834: 18ax3/4. 116280G2212: 22ax1/2. 116280G2234: 22ax3/4. 116280G2834: 28ax3/4. 116280G281: 28ax1. SANHA-Press Chrome Union adaptor, flat seal.: 116359G1212: 12x1/2. 116359G1534: 15x3/4. 116359G181: 18x1.

PuraPress series 8000: PURAPRESS Female elbow 90°: 180901238: 12x3/8. 180901212: 12x1/2. 180901412: 14x1/2. 180901538: 15x3/8. 180901512: 15x1/2. 180901534: 15x3/4. 180901612: 16x1/2. 180901812: 18x1/2. 180901834: 18x3/4. 180902212: 22x1/2. 180902234: 22x3/4. 180902812: 28x1/2. 180902834: 28x3/4. PURAPRESS Male elbow 90°: 180921238: 12x3/8. 180921212: 12x1/2. 180921412: 14x1/2. 180921538: 15x3/8. 180921512: 15x1/2. 180921612: 16x1/2. 180921812: 18x1/2. 180921834: 18x3/4. 180922212: 22x1/2. 180922234: 22x3/4. PURAPRESS Union elbow, flat sealing: 180961212: 12x1/2. 180961512: 15x1/2. 180961812: 18x1/2. 180961834: 18x3/4. 180962234: 22x3/4. PURAPRESS Tee, female: 181301212: 12x1/2x12. 181301412: 14x1/2x14. 181301538: 15x3/8x15. 181301512: 15x1/2x15. 181301612: 16x1/2x16. 181301812: 18x1/2x18. 181302212: 22x1/2x22. 181302234: 22x3/4x22. 181302812: 28x1/2x28. 181302834: 28x3/4x28. PURAPRESS Male adaptor: 182431238: 12x3/8. 182431212: 12x1/2. 182431438: 14x3/8. 182431412: 14x1/2. 182431538: 15x3/8. 182431512: 15x1/2. 182431534: 15x3/4. 182431612: 16x1/2. 182431634: 16x3/4. 182431812: 18x1/2. 182431834: 18x3/4. 182432212: 22x1/2. 182432234: 22x3/4. 182432834: 28x3/4. 18243763: 76,1x3. 18243893: 88,9x3. 182431084: 108,0x4. PURAPRESS Plug-in adaptor, female: 182461212: 12ax1/2. 182461538: 15ax3/8. 182461512: 15ax1/2. 182461812: 18ax1/2. 182461834: 18ax3/4. 182462212: 22ax1/2. 182462234: 22ax3/4. 182462834: 28ax3/4. PURAPRESS Flow Check Coupling with 2 holes: 18270FC27612: 76,1x1/2. 18270FC38934: 88,9x3/4. 18270FC410834: 108,0x3/4. PURAPRESS Female adaptor: 182701238: 12x3/8. 182701212: 12x1/2. 182701438: 14x3/8. 182701412: 14x1/2. 182701538: 15x3/8. 182701512: 15x1/2. 182701534: 15x3/4. 182701612: 16x1/2. 182701634: 16x3/4. 182701812: 18x1/2. 182701834: 18x3/4. 182702212: 22x1/2. 182702234: 22x3/4. 182702834: 28x3/4. 18270893: 88,9x3. PURAPRESS Plug-in adaptor, male: 182801212: 12ax1/2. 182801538: 15ax3/8. 182801512: 15ax1/2. 182801812: 18ax1/2. 182801834: 18ax3/4. 182802212: 22ax1/2. 182802234: 22ax3/4. 182802834: 28ax3/4. PURAPRESS Union, flat sealing: 1833015: 15. 1833018: 18. 1833022: 22. 1833028: 28. PURAPRESS Union, female, flat seal.: 183301512: 15x1/2. 183301534: 15x3/4. 183301812: 18x1/2. 183301834: 18x3/4. 183302234: 22x3/4. 183302834: 28x3/4. PURAPRESS Union, male, flat sealing: 183331238: 12x3/8. 183331212: 12x1/2. 183331512: 15x1/2. 183331534: 15x3/4. 183331812: 18x1/2. 183331834: 18x3/4. 183332212: 22x1/2. 183332234: 22x3/4. 183332834: 28x3/4. PURAPRESS Union adaptor, flat seal.: 183591212: 12x1/2. 183591234: 12x3/4. 183591438: 14x3/8. 183591412: 14x1/2. 183591538: 15x3/8. 183591512: 15x1/2. 183591534: 15x3/4. 183591634: 16x3/4. 183591834: 18x3/4. 183592234: 22x3/4. PURAPRESS Wall Plate, female end and female thread: 184721212: 12x1/2. 184721412: 14x1/2. 184721512: 15x1/2. 184721612: 16x1/2. 184721812: 18x1/2. 184721834: 18x3/4. 184722212: 22x1/2. 184722234: 22x3/4. PURAPRESS Wall plate with universal flange, with female end and female thread: 184731512: 15x1/2. 184732234: 22x3/4. PURAPRESS Double wall plate, both sides female end and female thread: 18478GZ151215: 15x1/2x15. 18478GZ151216: 15x1/2x16. 18478GZ151218: 15x1/2x18. 18478GZ151222: 15x1/2x22. 18478GZ161216: 16x1/2x16. 18478GZ161218: 16x1/2x18. 18478GZ161222: 16x1/2x22. 18478GZ181215: 18x1/2x15. 18478GZ181218: 18x1/2x18. 18478GZ181222: 18x1/2x22. 18478GZ221215: 22x1/2x15. 18478GZ221218: 22x1/2x18. 18478GZ221222: 22x1/2x22. PURAPRESS Mounting unit, female solder ends and female threads: 189761512: 15x1/2. PURAPRESS Installation set for fastening wall plates: 18980G1512: 15x1/2. 18980G1812: 18x1/2. 18980G2212: 22x1/2. PURAPRESS Installation set for fastening double wall plates: 18981G151215: 15x1/2x15. 18981G151218: 15x1/2x18. 18981G151222: 15x1/2x22. 18981G181215: 18x1/2x15. 18981G181218: 18x1/2x18. 18981G181222: 18x1/2x22. 18981G221215: 22x1/2x15. 18981G221218: 22x1/2x18. 18981G221222: 22x1/2x22. PURAPRESS Flange PN10/16: 1PURAPF28: DN 25 / 28 mm. 1PURAPF76: DN 65 / 76,1 mm. 1PURAPF76_DN80: DN 80 / 76,1 mm. 1PURAPF89: DN 80 / 88,9 mm. 1PURAPF108: DN 100 / 108,0 mm. SANHA Press Series 16000: SANHA-Press Chrom Bend 90° M/F: 116001A12: 12. 116001A15: 15. 116001A18: 18. 116001A22: 22. 116001A28: 28. SANHA-Press Chrom Bend 90° F/F: 116002A12: 12. 116002A15: 15. 116002A18: 18. 116002A22: 22. 116002A28: 28. SANHA-Press Chrom Bend 45° M/F: 11604012: 12. 11604015: 15. 11604018: 18. 11604022: 22. 11604028: 28. SANHA-Press Chrom Bend 45° F/F: 11604112: 12. 11604115: 15. 11604118: 18. 11604122: 22. 11604128: 28. SANHA-Press Chrom Full Crossover: 11608512: 12. 11608515: 15. 11608518: 18. 11608522: 22. 11608528: 28. SANHA-Press Chrom Partial crossover: 11608612: 12. 11608615: 15. 11608618: 18. 11608622: 22. 11608628: 28. SANHA-Press Chrom Tee: 11613012: 12. 11613015: 15. 11613018: 18. 11613022: 22. 11613028: 28. 116130121512: 12x15x12. 116130151212: 15x12x12. 116130151215: 15x12x15. 116130151512: 15x15x12. 116130181218: 18x12x18. 116130181515: 18x15x15. 116130181518: 18x15x18. 116130181815: 18x18x15. 116130182218: 18x22x18. 116130221222: 22x12x22. 116130221515: 22x15x15. 116130221522: 22x15x22. 116130221818: 22x18x18. 116130221822: 22x18x22. 116130222215: 22x22x15. 116130222218: 22x22x18. 116130222822: 22x28x22. 116130281522: 28x15x22. 116130281528: 28x15x28. 116130282222: 28x22x22. 116130282228: 28x22x28. 116130282815: 28x28x15. 116130282822: 28x28x22. SANHA-Press Chrom Reducing coupling: 1162401512: 15x12. 1162401812: 18x12. 1162401815: 18x15. 1162402215: 22x15. 1162402218: 22x18. 1162402815: 28x15. 1162402822: 28x22. SANHA-Press Chrom Reducer: 1162431512: 15ax12. 1162431812: 18ax12. 1162431815: 18ax15. 1162432215: 22ax15. 1162432218: 22ax18. 1162432815: 28ax15. 1162432822: 28ax22. SANHA-Press Chrom Male adaptor: 116243G1238: 12x3/8. 116243G1538: 15x3/8. SANHA-Press Chrom Coupling: 11627012: 12. 11627015: 15. 11627018: 18. 11627022: 22. 11627028: 28. SANHA-Press Chrom Female adaptor: 116270G1238: 12x3/8. 116270G1538: 15x3/8. SANHA-Press Chrom Slip coupling: 116270S12: 12. 116270S15: 15. 116270S18: 18. 116270S22: 22. 116270S28: 28. SANHA-Press Chrom Plug-in adaptor, male: 116280G1538: 15ax3/8.

Product Images

Approval Holder:

SANHA GmbH & Co. KG

Company Name

SANHA GmbH & Co. KG

Address

Im Teelbruch 80 Essen

Postcode

45219

Country

Germany

Phone

+32499361070

General Email

nicolas.verspecht@sanha.com

View All Listings by this Company

Manufacturer:

SANHA GmbH & Co. KG

Company Name

SANHA GmbH & Co. KG

Address

Im Teelbruch 80 Essen

Postcode

45219

Country

Germany

Phone

+32499361070

General Email

nicolas.verspecht@sanha.com

View All Listings by this Company

Range of copper end feed solder fittings for use with copper tube (EN1057). For above and below ground use. Maximum working pressure for sizes 8mm to 54mm is 25.0 bar. Maximum working pressure for sizes above 54mm is 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2309080

Size:

See models

Marking:

Brymec logo & size on fitting body.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

15 30014 COUPLER 22 30015 COUPLER 28 30016 COUPLER 35 30017 COUPLER 42 30018 COUPLER 54 30019 COUPLER 67 30020 COUPLER 76 30021 COUPLER 108 30022 COUPLER 22 x 15 30122 REDUCING COUPLING 28 x 22 30123 REDUCING COUPLING 28 x 15 30116 REDUCING COUPLING 35 x 22 30118 REDUCING COUPLING 35 x 28 30124 REDUCING COUPLING 42 x 22 30125 REDUCING COUPLING 42 x 28 30126 REDUCING COUPLING 42 x 35 30127 REDUCING COUPLING 54 x 35 30128 REDUCING COUPLING 54 x 42 30132 REDUCING COUPLING 15 x 10 30095 FITTING REDUCER 22 x 15 30097 FITTING REDUCER 28 x 15 30098 FITTING REDUCER 28 x 22 30099 FITTING REDUCER 35 x 15 30100 FITTING REDUCER 35 x 22 30101 FITTING REDUCER 35 x 28 30102 FITTING REDUCER 42 x 15 30107 FITTING REDUCER 42 x 22 30108 FITTING REDUCER 42 x 28 30103 FITTING REDUCER 42 x 35 30104 FITTING REDUCER 54 x 15 30109 FITTING REDUCER 54 x 22 30110 FITTING REDUCER 54 x 28 30111 FITTING REDUCER 54 x 35 30105 FITTING REDUCER 54 x 42 30106 FITTING REDUCER 67 x 28 30023 FITTING REDUCER 67 x 35 30024 FITTING REDUCER 67 x 42 30025 FITTING REDUCER 67 x 54 30114 FITTING REDUCER 76 x 35 30026 FITTING REDUCER 76 x 42 30027 FITTING REDUCER 76 x 54 30088 FI TTING REDUCER 76 x 67 30089 FITTING REDUCER 108 x 54 30091 FITTING REDUCER 15 30030 90° ELBOW 22 30031 90° ELBOW 28 30032 90° ELBOW 35 30033 90° ELBOW 42 30034 90° ELBOW 54 30035 90° ELBOW 67 30036 90° ELBOW 76 30037 90° ELBOW 108 30038 90° ELBOW 15 30129 90° STREET ELBOW 22 30130 90° STREET ELBOW 28 30131 90° STREET ELBOW 35 30133 90° STREET ELBOW 42 30134 90° STREET ELBOW 54 30135 90° STREET ELBOW 15 30063 45° ELBOW 22 30064 45° ELBOW 28 30065 45° ELBOW 35 30066 45° ELBOW 42 30067 45° ELBOW 54 30068 45° ELBOW 67 30069 45° ELBOW 76 30070 45° ELBOW 108 30071 45° ELBOW 15 30144 45° STREET ELBOW 22 30145 45° STREET ELBOW 28 30146 45° STREET ELBOW 35 30147 45° STREET ELBOW 42 30148 45° STREET ELBOW 54 30149 45° STREET ELBOW 15 30275 SLIP COUPLING 22 30276 SLIP COUPLING 28 30277 SLIP COUPLING 35 30278 SLIP COUPLING 42 30279 SLIP COUPLING 54 30280 SLIP COUPLING 15 x ½” 30152 IMPERIAL TO METRIC COUPLER 22 x ¾” 30153 IMPERIAL TO METRIC COUPLER 28 x 1” 30154 IMPERIAL TO METRIC COUPLER 15 30047 EQUAL TEE 22 30048 EQUAL TEE 28 30049 EQUAL TEE 35 30050 EQUAL TEE 42 30051 EQUAL TEE 54 30052 EQUAL TEE 67 30053 EQUAL TEE 76 30054 EQUAL TEE 108 30055 EQUAL TEE 22 x 22 x 15 30207 REDUCING TEE 28 x 28 x 15 30211 REDUCING TEE 28 x 28 x 22 30212 REDUCING TEE 35 x 35 x 15 30223 REDUCING TEE 35 x 35 x 22 30213 REDUCING TEE 35 x 35 x 28 30229 REDUCING TEE 42 x 42 x 15 30242 REDUCING TEE 42 x 42 x 22 30214 REDUCING TEE 42 x 42 x 28 30243 REDUCING TEE 42 x 42 x 35 30215 REDUCING TEE 54 x 54 x 15 30253 REDUCING TEE 54 x 54 x 22 30254 REDUCING TEE 54 x 54 x 28 30246 REDUCING TEE 54 x 54 x 35 30216 REDUCING TEE 54 x 54 x 42 30217 REDUCING TEE 67 x 67 x 28 30248 REDUCING TEE 67 x 67 x 35 30255 REDUCING TEE 67 x 67 x 42 30256 REDUCING TEE 67 x 67 x 54 30218 REDUCING TEE 76 x 76 x 28 30257 REDUCING TEE 76 x 76 x 35 30262 REDUCING TEE 76 x 76 x 42 30263 REDUCING TEE 76 x 76 x 54 30264 REDUCING TEE 76 x 76 x 67 30265 REDUCING TEE 108 x 108 x 54 30271 REDUCING TEE 108 x 108 x 67 30272 REDUCING TEE 108 x 108 x 76 30273 REDUCING TEE 22 x 15 x 15 30205 REDUCING TEE 22 x 15 x 22 30206 REDUCING TEE 28 x 15 x 15 30198 REDUCING TEE 28 x 15 x 22 30219 REDUCING TEE 28 x 15 x 28 30209 REDUCING TEE 28 x 22 x 15 30220 REDUCING TEE 28 x 22 x 22 30208 REDUCING TEE 28 x 22 x 28 30210 REDUCING TEE 35 x 22 x 22 30225 REDUCING TEE 35 x 22 x 35 30228 REDUCING TEE 35 x 28 x 22 30226 REDUCING TEE 35 x 28 x 28 30227 REDUCING TEE 35 x 28 x 35 30232 REDUCING TEE 42 x 28 x 28 30235 REDUCING TEE 54 x 42 x 42 30247 REDUCING TEE 15 x 15 x 22 30204 REDUCING TEE 22 x 22 x 28 30197 REDUCING TEE 28 x 28 x 35 30221 REDUCING TEE 15 30079 STOP END 22 30080 STOP END 28 30081 STOP END 35 30082 STOP END 42 30083 STOP END 54 30084 STOP END 67 30085 STOP END 76 30086 STOP END 108 30087 STOP END 15 30230 FULL CROSS OVER 22 30231 FULL CROSS OVER 15 30237 PARTIAL CROSS OVER 22 30238 PARTIAL CROSS OVER

Approval Holder:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

Country

United Kingdom

General Email

Jeremy.douglas@brymec.com

View All Listings by this Company

Dual flush, WC outlet valves. Model A2706 is operated via a push button assembly for either full or reduced flush. Maximum operating temperature. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2011116

Size:

2” BSP (M)

Marking:

Flomasta, WRAS logo on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

5059340756790 5059340756479

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Domestic hot water heat recovery unit incorporating a stainless steel plate heat exchanger. The product is supplied with 15mm x 15mm compression 90° elbows for installation on the inlet and outlet. Maximum operating pressure 10 bar. Maximum operating temperature 80°C

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm compression elbow

Marking:

Worcester (brand of the Bosch group), serial no., model name and technical information on adhesive label on outer casing.

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

Greenstar 8-718-644-603

Product Images

Approval Holder:

Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.

Company Name

Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.

Address

Organize Sanayi Bolgesi, 45030 Manisa, Turkey

View All Listings by this Company

Manufacturer:

Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.

Company Name

Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.

Address

Organize Sanayi Bolgesi, 45030 Manisa, Turkey

View All Listings by this Company

Range of solar assisted direct gas fired condensing storage water heaters with an enamel lining and a titanium anode incorporating a solar heat exchanger (max. working pressure 6,0 bar). Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504715

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP(M) inlet.

Marking:

Company logo (AO Smith), model and technical information on body.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

SGE 40 & SGE 60

Product Images

Approval Holder:

A.O.Smith Water Products Company B.V.

Company Name

A.O.Smith Water Products Company B.V.

Address

De Run 5305 Veldhoven

Postcode

5503 LW

Country

Netherlands

Phone

+31 (0) 40 294 2560

General Email

hmichiels@aosmith.com

View All Listings by this Company

Manufacturer:

A.O.Smith Water Products Company B.V.

Company Name

A.O.Smith Water Products Company B.V.

Address

De Run 5305 Veldhoven

Postcode

5503 LW

Country

Netherlands

Phone

+31 (0) 40 294 2560

General Email

hmichiels@aosmith.com

View All Listings by this Company

Range of direct gas fired condensing water heaters with a stainless steel body. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504717

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (F)

Marking:

Company logo (AO Smith), model and technical information on body.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

TWI 35-200 & TWI 45-200

Product Images

Approval Holder:

A.O.Smith Water Products Company B.V.

Company Name

A.O.Smith Water Products Company B.V.

Address

De Run 5305 Veldhoven

Postcode

5503 LW

Country

Netherlands

Phone

+31 (0) 40 294 2560

General Email

hmichiels@aosmith.com

View All Listings by this Company

Manufacturer:

A.O.Smith Water Products Company B.V.

Company Name

A.O.Smith Water Products Company B.V.

Address

De Run 5305 Veldhoven

Postcode

5503 LW

Country

Netherlands

Phone

+31 (0) 40 294 2560

General Email

hmichiels@aosmith.com

View All Listings by this Company

Range of stainless steel lined direct water heaters fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504718

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP (M)

Marking:

Company logo (AO Smith), model and technical information on body.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

IT 300, IT 400, IT 500, IT 600, IT 750, IT 1000, ITE 400, ITE 500, ITE 600, ITE 750, ITE 1000, ITS 300, ITS 400, ITS 500, ITS 600, ITS 750, ITS 1000, ST 300, ST 400, ST 500, ST 600, ST 750 & ST 1000

Product Images

Approval Holder:

A.O.Smith Water Products Company B.V.

Company Name

A.O.Smith Water Products Company B.V.

Address

De Run 5305 Veldhoven

Postcode

5503 LW

Country

Netherlands

Phone

+31 (0) 40 294 2560

General Email

hmichiels@aosmith.com

View All Listings by this Company

Manufacturer:

A.O.Smith Water Products Company B.V.

Company Name

A.O.Smith Water Products Company B.V.

Address

De Run 5305 Veldhoven

Postcode

5503 LW

Country

Netherlands

Phone

+31 (0) 40 294 2560

General Email

hmichiels@aosmith.com

View All Listings by this Company

Range of direct fired water heaters with an enamel lining and a titanium anode. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504721

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Lochinvar on body.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

LGC 160-210 CE LGC 200-210 CE LGC 160-350 CE LGC 200-350 CE LGC 245-420 CE LGC 285-420 CE LGC 245-560 CE LGC 285-560 CE LGC 380-560 CE WATER HEATERS

Approval Holder:

Lochinvar Ltd.

Company Name

Lochinvar Ltd.

Address

8 Lombard Way The MXL Centre Banbury

Postcode

OX16 4TJ

Country

Oxon

Phone

+44 (0) 1295 269981

General Email

general@lochinvar.ltd.uk

View All Listings by this Company

Range of indirect water heaters with an enamel lining, a magnesium sacrificial anode and single wall spiral heat exchanger (maximum working pressure 6.0 bar). Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 7.0 bar. Maximum operating temperature 80°C

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504724

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (F)

Marking:

Lochinvar on adhesive label on body.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

SIVS 330 G E SIVS 440 G E SIVS 550 G E SIVS 660 G E LST 330 G E LST 440 G E LST 550 G E LST 660 G E

Approval Holder:

Lochinvar Ltd.

Company Name

Lochinvar Ltd.

Address

8 Lombard Way The MXL Centre Banbury

Postcode

OX16 4TJ

Country

Oxon

Phone

+44 (0) 1295 269981

General Email

general@lochinvar.ltd.uk

View All Listings by this Company

Range of direct gas fired condensing storage water heaters with an enamel lining and a titanium anode. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504722

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Lochinvar on control board.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

ECH 32-220 CE ECH 33-370 CE ECH 52-370 CE ECH 63-370 CE ECH 87-480 CE ECH 106-480 CE ECH 129-480 CE HWH 32-220 CE HWH 33-370 CE HWH 52-370 CE HWH 63-370 CE HWH 87-480 CE HWH 106-480 CE HWH 129-480 CE WATER HEATERS

Approval Holder:

Lochinvar Ltd.

Company Name

Lochinvar Ltd.

Address

8 Lombard Way The MXL Centre Banbury

Postcode

OX16 4TJ

Country

Oxon

Phone

+44 (0) 1295 269981

General Email

general@lochinvar.ltd.uk

View All Listings by this Company

Range of solar assisted direct gas fired condensing storage water heaters with an enamel lining and a titanium anode incorporating a solar heat exchanger (max. working pressure 6,0 bar). Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504723

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP(M) inlet.

Marking:

Lochinvar on control board.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

HWHC 44-370 CE HWHC 63-370 CE

Approval Holder:

Lochinvar Ltd.

Company Name

Lochinvar Ltd.

Address

8 Lombard Way The MXL Centre Banbury

Postcode

OX16 4TJ

Country

Oxon

Phone

+44 (0) 1295 269981

General Email

general@lochinvar.ltd.uk

View All Listings by this Company

Range of in-line ultrasonic water meters with blue epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50-200 flanged.

Marking:

Baylan on dial cover. Baylan, flow arrow and size on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

UW-6: DN50 (port length 200mm), UW-0: DN65 (port length 200mm), UW-1: DN80 (port length 225mm), UW-2: DN100 (port length 250mm), UW-3: DN125 (port length 250mm), UW-4: DN150 (port length 300mm), UW-5: DN200 (port length 350mm).

Product Images

Approval Holder:

BAYLAN OLCU ALETLERI SAN. TICARET

Company Name

BAYLAN OLCU ALETLERI SAN. TICARET

Address

ANONIM SIRKETI AOSB 10032 SOKAK NO 16 CIGLI IZMIR TURKEY

View All Listings by this Company

Manufacturer:

BAYLAN OLCU ALETLERI SAN. TICARET

Company Name

BAYLAN OLCU ALETLERI SAN. TICARET

Address

ANONIM SIRKETI AOSB 10032 SOKAK NO 16 CIGLI IZMIR TURKEY

View All Listings by this Company

‘Monsoon Standard’ range of single and twin ended shower booster pumps with brass bodies, brass impellers, EPDM seals and NBR ‘O’-rings. The inlet(s) of the pump body incorporate(s) a plastic strainer. Models with push fit connections include an integral isolation valve. Pushfit connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240504702

Note:

R007 & R009 applies to the 21mm & 22mm pushfit inlet/outlet hoses.

Size:

44428 - Monsoon S1.5 bar Twin EXIP model: ¾” BSP (M) (inlet/outlet). ROI suffix models: Stainless steel braided EPDM lined flexible hose assemblies incorporating 21mm push-fit end connections (inlet/outlet). EXP suffix models: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ¾” captive nut end connections (inlet/outlet). All other models: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating 22mm push-fit end connections (inlet/outlet).

Marking:

Stuart Turner, model no., serial no, part no., pressure rating, Monsoon, manufacturer’s address and other technical information on adhesive label on body.

Installation Requirements:

R001 R007 R009 R415

Expiry date:

31/05/2029

Model:

46420: Monsoon S4.5 bar Single, 46419: Monsoon S3.0 bar Single, 46418: Monsoon S4.5 bar Twin, 46417: Monsoon S4.0 bar Twin, 46416: Monsoon S3.0 bar Twin, 46415: Monsoon S2.0 bar Twin, 46506: Monsoon S1.5 bar Twin, 44754: Monsoon S1.5 bar Twin, 46497: Monsoon S2.0 bar Single, 44424: Monsoon S1.5 bar Twin, 44423: Monsoon S2.0 bar Twin, 44422: Monsoon S2.0 bar Single, 44428: Monsoon S1.5 bar Twin EXIP, 46420ROI: Monsoon S4.5 bar Single, 46419ROI: Monsoon S3.0 bar Single, 46418ROI: Monsoon S4.5 bar Twin, 46417ROI: Monsoon S4.0 bar Twin, 46416ROI: Monsoon S3.0 bar Twin, 46415ROI: Monsoon S2.0 bar Twin, 46506ROI: Monsoon S1.5 bar Twin, 46497ROI: Monsoon S2.0 bar Single, 46420EXP: Monsoon S4.5 bar Single, 46419EXP: Monsoon S3.0 bar Single, 46418EXP: Monsoon S4.5 bar Twin, 46417EXP: Monsoon S4.0 bar Twin, 46416EXP: Monsoon S3.0 bar Twin, 46415EXP: Monsoon S2.0 bar Twin, 46506EXP: Monsoon S1.5 bar Twin, 46497EXP: Monsoon S2.0 bar Single.

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Manufacturer:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of horizontal or vertical multi-stage pumps with a stainless-steel body (HM models) or cast iron body with blue coloured cationic resin coating (VM models), incorporating either plastic or stainless-steel impellers (see model), stainless steel sleeve, EPDM gaskets and seals. Maximum working pressure 10.0 bar / 16.0 bar (see models). Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240206701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

HM models: 1” - 2” BSP (F) VM models: 1¼” - 1½” BSP (F).

Marking:

Lowara or Goulds Water Technology (both brands of Xylem), manufacturer and address, model number, serial number, maximum working pressure and technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

28/02/2029

Model:

1HM, 3HM, 5HM, 10HM, 15HM & 22HM. 1VM, 3VM, 5VM & 10VM. Model nomenclature: W XXX YY Z EM Where: W - flow rate (m3/h), either 1, 3, 5, 10, 15, or 22. XXX - Model type: Horizontal (HM) or Vertical (VM) mode, where last (optional) digit can denote the variable speed drive as follows: Null = standard asynchronous motor, H = equipped with Hydrovar, X = other drives, E = e-SM. YY - Number of impellers/stages HM models: 2-25 stages only (02-25), VM models: 2-8 stages only (02-08). Z - Material, where: (P) is plastic impeller and SS AISI 304 body (HM & VM models), (S) is SS AISI 304 impeller and body (HM models only), (N) is SS AISI 316 impeller and body (HM models only). E = 5 - 6 digits for electrical specification. M = 3 digits, where: 1st digit: Mech. rotary seal - V = Aluminium oxide (Ceramic), or Mech. rotary seal - Q = Silicon carbide (Ceramic). 2nd digit: Mech. stationary seal - B = Carbon resin impregnated. 3rd digit: Mech. seal elastomers - E = EPDM. Example code: 1HM03P05M5HVBE. Max Working Pressure for VM models → 10 bar. Max Working Pressure for HM models with stainless steel impellers and QBE Mechanical Seal → 16 bar (Depending on number of stages - see below), Max Working Pressure for HM models with plastic impellers and/or VBE Mechanical Seal → 10 bar (Depending on number of stages - see below). 1HM (P)/(S)/(N) 1-16 stages - 10.0 bar, 1HM (S)/(N) 18-25 stages - 16.0 bar. 3HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 3HM (S)/(N) 14-21 stages - 16.0 bar. 5HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 5HM (S)/(N) 14-21 stages - 16.0 bar. 10HM (P)/(S)/(N) 1-8 stages - 10.0 bar, 10HM (S)/(N) 9-13 stages - 16.0 bar. 15HM (S)/(N) 2-7 stages - 10.0 bar, 22HM (S)/(N) 2-5 stages - 10.0 bar.

Approval Holder:

Xylem Service Italia S.r.l

Company Name

Xylem Service Italia S.r.l

Address

Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza

Country

Italy

Phone

0039 0444 707111

View All Listings by this Company

Manufacturer:

Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.

Company Name

Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.

Address

View All Listings by this Company

Range of submersible pumps with stainless steel bodies and impellers and NBR gaskets and ‘O’-rings. Cold water use only. .

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2303082

Note:

The level control assembly (cable and level control) are not covered under the scope of this approval. These pumps are also open outlet use only.

Size:

1 ¼” Female BSP outlet.

Marking:

Stuart Turner, model no., serial no., pressure and date of manufacture (DD/MM/YYY) on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/03/2028

Model:

47064 47065 47066 47070 47071 47072

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of plastic, stainless steel or brass (see models) shower outlets comprising of a shower handset, shower rails and hose (Models: 58004-46XX and 58004-47XX), a shower handset only (Models: 53401-00XX, 56031-00XX, 53283-04XX, 56565-02XX, 56205-00XX, 56321-20XX and 56183-10XX) or an overhead shower head only (models: 51051-12XX, 54012-31XX, 54112-31XX and 54108-00XX). Models 56565-02XX and 54108-00XX incorporate stainless steel strainers. Maximum operating temperature 60.0°C, open outlet use.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240602035

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) or (F) (see models)

Marking:

Lota on handset & shower Rail (58004-46XX & 58004-47XX only) Lota on body (all other models)

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

58004-46XX (Plastic, ½” BSP (F)) 58004-47XX (Plastic, ½” BSP (F)) 53401-00XX (Brass, ½” BSP (M)) 56031-00XX (Plastic, ½” BSP (M)) 53283-04XX (Plastic, ½” BSP (M)) 56565-02XX (Plastic, ½” BSP (M)) 56205-00XX (Plastic, ½” BSP (M)) 56321-20XX (Plastic, ½” BSP (M)) 56183-10XX (Plastic, ½” BSP (M)) 51051-12XX (Plastic, ½” BSP (F)) 54012-31XX (Stainless Steel, ½” BSP (F)) 54112-31XX (Stainless Steel, ½” BSP (F)) 54108-00XX (Stainless Steel, ½” BSP (F)) Where XX denotes the finish and can be replaced with any of the following: 01 = Chrome (All models) 23 = Polished nickel (model 53401-00XX only) 6803 = Matt black (models 56183-10XX & 56321-20XX only)

Product Images

Approval Holder:

Xiamen lota international co. ltd

Company Name

Xiamen lota international co. ltd

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Manufacturer:

Xiamen lota international co. ltd

Company Name

Xiamen lota international co. ltd

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

A range of plastic overhead shower heads and shower handsets with various finishes. Maximum operating temperature 65.0°C Open outlet use only

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240602040

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) Shower handsets ½” BSP (F) Shower heads

Marking:

ZhongYuan on body

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

Shower heads: RS1022 RS1036 RS1040 RS1041 RS1222 S08 S09 S15 S22 S37 Shower handsets: S026 S028 S033 S101 S111 S120 S518 S532 S533 S590 S600 S609 S704 S706 All models have three surfaces of chrome, black, gun grey.

Product Images

Approval Holder:

YUHUAN ZHONGYUAN SANITARY WARE CO., LTD

Company Name

YUHUAN ZHONGYUAN SANITARY WARE CO., LTD

Address

NO.50 FUGANG ROAD, BINGANG INDUSTRY PARK, YUHUAN CITY, ZHEJIANG CHINA

View All Listings by this Company