Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250902720

Range of multistage centrifugal pumps with stainless-steel housings, stainless-steel impellers and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250902720
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN25 - DN200 flanged.
Marking:: Dooch, model, serial number and technical info on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 30/09/2030
Proviso:: The discharge from the drain core must be made via a type AA, AB or AD air gap, or in accordance with EN 1717.
Model:: XRLNa-b-c-d Where: XRL = model. With N = Wetted metallic material in SUS316L, Without N = Wetted metallic material in SUS304. a = Rated flow in m³/h (1 – 255). DN25 = 1-3. DN32 = 4-5. DN40 = 10. DN50 = 15-20. DN65 = 32. DN80 = 45. DN100 = 64 or 95. DN150 = 125-155. DN200 = 185-255. b = Number of impellers (stages 1 – 36). DN25 & DN32 models with 1 – 36 stages. DN40 models with 1 – 22 stages. DN50 models with 1 – 17 stages. DN65 models with 1 – 14 stages. DN80 models with 1 – 13 stages. DN100 models with 1 – 8 stages. DN150 models with 1 – 10 stages. DN200 models with 1 – 8 stages. c = Number of cutting impellers (0 – 3). (Note: c can be omitted when c = 0.) d = DN size (DN25 – DN200). (Note: d can be omitted.) E.g., XRL32-7-2-DN65 denotes: Pump is made of SUS304, rated flow 32 m³/h, 7 impellers, 2 cutting impellers and size DN65.

Approval Holder:: SHANGHAI SINO-KOREA DOOCH PUMP MFG. CO., LTD

Company Name
SHANGHAI SINO-KOREA DOOCH PUMP MFG. CO., LTD
Address
No 239 Zhangliantang Rd Liantang Ind Park Qingpu District Shanghai City China

View All Listings by this Company
Manufacturer:: ZHONGHAN DOOCH PUMP(HUZHOU)CO., LTD.

Company Name
ZHONGHAN DOOCH PUMP(HUZHOU)CO., LTD.
Address
NO 669 DAYANG ROAD KANGSHAN STREET HUZHOU ZHEJAING CHINA

View All Listings by this Company

WRAS Approval Number: #251007701

CM(E) range of electronically operated pumps available in stainless steel, (‘EN 1.4301/AISI304’ or ‘EN 1.4401 /AISI316’) and cast iron. The pumps are supplied with Sic-Sic mechanical shaft seals and FKM or EPDM seals. Maximum operating parameters: Cast iron models: Maximum working pressure 6.0 bar @ 90°C. Maximum working pressure 10.0 bar @ 40°C. Stainless steel models (not self-priming variants): Maximum working pressure 10.0 bar @ 99°C. Maximum working pressure 16.0 bar @ 90°C. Stainless steel self-priming models (CM(E) 1, 3 & 5 (AISI 304) only): Maximum working pressure 10.0 or 16.0 bar @ 60°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 251007701
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1” - 2” BSP (F) or NPT (F) inlet and outlet.
Marking:: Grundfos and Grundfos logo, type, model, manufacturing country and technical information on adhesive labels either on the terminal box or fan cover. Grundfos and Grundfos logo on the terminal box or fan cover.
Installation Requirements:: R001 R415
Expiry date:: 31/10/2030
Model:: CM(E)1, CM(E)3 and CM(E)5: CM(E)1, cast iron / AISI304 2 – 8 stages. CM(E)3, cast iron / AISI304 2 – 8 stages. CM(E)5, cast iron / AISI304 2 – 8 stages. CM(E)1, AISI316 2 - 14 stages. CM(E)3, AISI316 2 - 14 stages. CM(E)5, AISI316 2 - 13 stages. CM(E)10 CM(E)15 and CM(E)25: CM(E)10, cast iron / AISI304 1 – 5 stages. CM(E)15, cast iron / AISI304 1 – 4 stages. CM(E)25, cast iron / AISI304 1 – 4 stages. CM(E)10, AISI316 1 – 8 stages. CM(E)15, AISI316 1 – 4 stages. CM(E)25, AISI316 1 – 4 stages. Self-priming models: CM(E)1, AISI304 3 – 6 stages (S or O) CM(E)3, AISI304 3 – 6 stages (S or O) CM(E)5, AISI304 3 – 7 stages (S or O) Model key: CM/CME X1-X2 X3 X4-X5-X6-X7-X8 X9 X10 X11 X11-X12-X13-X14 Where: CM = Centrifugal Modular. CME = Centrifugal Modular with integrated frequency converter. X1 = Rated flow rate at 50 Hz (m³/h): 1-25. X2 = Number of impellers: 1-14. X3 = Pump Versions: A - Basic Version. E: Pumps with certificates/approvals. O: Self-priming version (maximum suction lift 8 metres) (Only available on CM(E) 1, 3 & 5 stainless steel (AISI304) models). S: Self-priming version (maximum suction lift 4 metres) (Only available on CM(E) 1, 3 & 5 stainless steel (AISI304) models). X4 = Pipe connection: R: Rp (ISO 7/1). S: Internal NPT thread. X5 = Material in contact with pump media: A: inlets and outlets parts EN-GJL-200, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. G: Sleeve, Pump shaft + Impellers and chambers EN 1.4401/AISI 316. I: Sleeve, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. X6 = Rubber parts in pump (excluding neck ring and shaft seal): E: EPDM. V: FKM. X7 = Shaft seal: A: O-ring seal with fixed driver. X8 = Material of rotating seal face: Q: Silicon Carbide (SIC). X9 = Material of stationary seal face: Q: Silicon Carbide (SIC). X10 =Material of secondary seal: E: EPDM. V: FKM. X11 = Supply voltage (electrical characteristics - not relevant for the WRAS approval): A/B/B1/B2/C1/E/E1/F/G/H/J/O/S/T/U/V/X. X12 = Motor information(electrical characteristics - not relevant for the WRAS approval): A/B/C/D/EF/G/H/I/J. X13 = Mains plug (electrical characteristics - not relevant for the WRAS approval): A/B/C/D. X14 = Sensor (electrical characteristics - not relevant for the WRAS approval): N: No sensor. Example: CM 10-3 A-R-I-E-A Q Q E C1-A-A-N

Approval Holder:: Grundfos Holding A/S

Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company

WRAS Approval Number: #250808004

Range of brass shower arms and plastic shower heads (various finishes) incorporating EPDM seals and ‘O’-rings, silicone seals and spray insert. The 26 469 xxx model is ceiling mounted & 26 470 xxx model is wall mounted. Maximum operating temperature 60°C. Open outlet use only.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 250808004
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (F).
Marking:: Hansgrohe on the body.
Installation Requirements:: R001 R040
Expiry date:: 31/08/2030
Model:: 26 469 xx0 Hansgrohe Raindance select S – Overhead shower 240 2 jet EcoSmart with ceiling connector. 26 470 xx0 Hansgrohe Raindance select S – Overhead shower 240 2 jet EcoSmart with shower arm. 26 469 400 Hansgrohe Raindance select S – Overhead shower 240 2 jet EcoSmart with shower arm.

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

WRAS Approval Number: #2106064

Range of chromium plated stainless steel or brass interlocked shower hoses with an optional PVC outer layer. Incorporating either a PVC or TPE inner hose and EPDM gaskets. Maximum operating temperature 60°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2106064
Note:: Open outlet use only.
Size:: ½” BSP Captive nut inlet x outlet.
Marking:: Intatec logo on conical nut.
Installation Requirements:: R001
Expiry date:: 30/06/2026
Model:: IX100005CP - 1.5M BRAIDED IX100004CP - 1.5M SMOOTH 30003CPX - 1.5M BRAIDED IX100006CP - 2M BRAIDED 30006CPX - 2M BRAIDED

Approval Holder:: Intatec Limited

Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

WRAS Approval Number: #2106065

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2106065
Note:: Open outlet use only.
Size:: ½” BSP Captive nut inlet x outlet.
Marking:: WRAS, DTC15 and date of manufacture (YY) on captive nut.
Installation Requirements:: R001
Expiry date:: 30/06/2026
Model:: HOS2.0CPS03

Approval Holder:: Methven UK Limited

Company Name
Methven UK Limited
Address
Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

WRAS Approval Number: #250904002

Range of EVOX stainless steel or grey nylon braided polyethylene lined flexible hose assemblies incorporating EPDM ‘O’-rings with various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 250904002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: MALE 8X1 MALE 10X1 F ½ WITH GASKET F 3/8 WITH GASKET
Marking:: MRG DN 6 WRAS, year of manufacture YY
Installation Requirements:: R001 R008
Expiry date:: 30/09/2030
Model:: EVOX DN6 RANGE

Approval Holder:: M.R.G. S.r.l.

Company Name
M.R.G. S.r.l.
Address
Via per Baraggia, 1 Gozzano
Postcode
28024
Country
Italy
Phone
+39 0322 94131
General Email
info@mrgspa.com

View All Listings by this Company

WRAS Approval Number: #250915001

‘KM1001 series’ of stainless steel braided EPDM lined flexible hose assemblies. Compression end connections are for use with copper pipes (manufactured to EN 1057). Compression end connections are also available with brass bodied (nickel plated) isolation valves incorporating a chrome plated brass ball. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 250915001
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: COMEALE (registered trademark of Taizhou Kemei Plumbing Hose Co., Ltd), WRAS and year of manufacture (YYYY) on ferrules.
Installation Requirements:: R001
Expiry date:: 30/09/2030
Model:: KM1001 series: DN8 bore available with connections: G3/8” BSP (F), G1/2” BSP (F), G1/2” BSP (F) elbow, M8x1 and M10x1. DN10 bore available with connections: G3/8” BSP (F), G1/2” BSP (F), G3/4” BSP (F), G1/2” BSP (F) elbow, M8x1, M10x1, M12x1, 15mm compression and 15mm compression with isolation valve. DN12 bore available with connections: G1/2” BSP (F), G3/4” BSP (F), G1/2” BSP (F) elbow, G3/4” BSP (F) elbow, 22mm compression and 22mm compression with isolation valve.

Approval Holder:: Taizhou Kemei Plumbing Hose Co., Ltd

Company Name
Taizhou Kemei Plumbing Hose Co., Ltd
Address
120 meters north of the intersection of Xinxuan Line and Wupu Road, Chumen Town, Yuhuan City, Zhejiang Province
Country
China
General Email
export@tzkemei.com

View All Listings by this Company
Manufacturer:: Taizhou Kemei Plumbing Hose Co., Ltd

Company Name
Taizhou Kemei Plumbing Hose Co., Ltd
Address
120 meters north of the intersection of Xinxuan Line and Wupu Road, Chumen Town, Yuhuan City, Zhejiang Province
Country
China
General Email
export@tzkemei.com

View All Listings by this Company

WRAS Approval Number: #250912045

Range of stainless-steel braided, EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature: 60°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 250912045
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: SODAO, WRAS and year of manufacture (YYYY).
Installation Requirements:: R001 R008
Expiry date:: 30/09/2030
Model:: SD-x-xx-xx-xxx Where: “x” = bore diameter: DN8, DN12 or DN20. “xx” = connection sizes: 01 = 1/4” OD (plain pipe for pushfit), 02 = 3/8” OD (plain pipe for pushfit), 03 = F1/2” OD (plain pipe for pushfit), 04 = F3/8”, 05 = M3/8”, 06 = F1/2”, 07 = M1/2”, 08 = F3/4”, 09 = M3/4”, 10 = F1”, 11 = M1”, 12 = Elbow 1/2”, 13 = Elbow 3/4”, 14 = Elbow 1". “xxx” = hose length: 15cm-200cm. Connection: 01, 02, 03, 04, 05, 06, 07, 12 applicable for DN8 only. Connection: 06, 07, 08, 09, 12, 13 applicable for DN12 only. Connection: 08, 09, 10, 11, 13, 14 applicable for DN20 only.

Approval Holder:: SHANGHAI SODAO SANITARYWARE EQUIPMENT CO., LTD

Company Name
SHANGHAI SODAO SANITARYWARE EQUIPMENT CO., LTD
Address
1-2, Building 9, Donglin Science Park, No. 408 Nanwenzao Road, Baoshan District, Shanghai

View All Listings by this Company
Manufacturer:: SODAO PLUMBING TECHNOLOGY (TAIZHOU) CO., LTD

Company Name
SODAO PLUMBING TECHNOLOGY (TAIZHOU) CO., LTD
Address
No.5, Youth West Road, Zhongshan Industrial Zone, Chumen Town, Yuhuan City, Zhejiang

View All Listings by this Company

WRAS Approval Number: #260114001

Range of EPDM braided hoses (various options) and optional end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 260114001
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Model
Marking:: Marking: PPI, WRAS & date of manufacture (YYYY) on crimp connector.
Installation Requirements:: R001
Expiry date:: 31/01/2031
Model:: BZG-A-B-C-XXXX (BZG – Connection A - Connection B – Outer braided material – Length) BZG – The name of our braided tube A-B – Connection A and Connection B (from 01 to 15) 01 = F1/2, 02 = F1/2 Rotating joint, 03 = F3/8, 05 = 15mm compression fitting(17-100), 06 = F15, 07 = F10, 08 = M8*1(L=12-100), 09 = M10*1(L=12-100), 10 = M12*1(L=12-100), 11 = M12*1(two O ring), 12 = M15*1, 13 = T connection（L=2-110), 14 = ￠10 Quick installation connector & 15 = M22*1 C – Outer braided material: SS = stainless steel wire, NY= gray or black nylon wire , SR= stainless steel wire plus red nylon wire, SB= stainless steel wire plus blue nylon wire, NR= gray or black nylon wire plus red nylon wire & NB= gray or black nylon wire plus blue nylon wire. XXXX – Length (15cm to 200cm): 0150=15cm 2000=200cm For example: BZG-01-09-SS-0450 would be for F1/2 x M10, stainless steel braided, 45cm long.

Approval Holder:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

WRAS Approval Number: #251002010

Range of Stainless-Steel braided EPDM lined flexible hose assemblies with various end connections. For use with copper pipe manufactured to EN1057 Maximum working pressure; 16 Bar Maximum operating temperature; 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 251002010
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models
Marking:: Fanski, WRAS and year of manufacture (YYYY) on the hose ferrule.
Installation Requirements:: R001
Expiry date:: 31/10/2030
Model:: DG10E-WRAS-461-L (3/4" BSP (F) x 21mm compression) DG10E-WRAS-462-L (1” BSP (F) x 1” BSP (F)) DG10E-WRAS-463-L (1” BSP (F) x 1” BSP (M)) DG10E-124-001-L (1/2” BSP (F) x 15mm Spigot) Model naming rules: DG10E-WRAS-461-L as example, DG10E=series name, 461= model code, L=length and can be between 50mm and 4000mm.

Approval Holder:: Fanski Group Inc.

Company Name
Fanski Group Inc.
Address
NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang
Postcode
317600
Country
China

View All Listings by this Company
Manufacturer:: Fanski Group Inc.

Company Name
Fanski Group Inc.
Address
NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang
Postcode
317600
Country
China

View All Listings by this Company