Wall mounted shower head and arm (chromium plated brass) incorporating a NBR seal and TPE gasket. The inlet to the shower head from the shower arm incorporates a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2201056

Note:

Open outlet use only.

Size:

½” BSP (M).

Marking:

Dornbracht on shower arm surround

Installation Requirements:

R001 R040

Expiry date:

31/01/2027

Model:

28505979

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Manufacturer:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

‘Concept’ & ‘Advance’ ranges of atmospheric steaming ovens. The products incorporate a retractable triple layered hose on a reel and a push-button operated shower handset. The inlet of the shower handset incorporates a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection The water supply is controlled via a solenoid valve. The retractable hose has its own dedicated supply also controlled via a solenoid valve. The products are supplied with dual layer supply hoses (grey PVC outer layer/black PVC inner layer) with ¾” captive nut end connections, and chrome plated DZR brass ½” BSP (F) x ¾” BSP (M) double check valve assemblies (suitable for backflow protection against Fluid Category 3) for installation on each inlet. Maximum working pressure 4.0 bar. Cold supply only.

Section:

1690 Steaming Oven(s)

WRAS Approval Number:

2110369

Note:

Cleaning chemicals and detergents used in the automatic spray washing function must not represent a Fluid Category risk higher than Fluid Category 3. The Fluid Category of risk associated with the retractable hose and self-closing trigger supplied with this appliance can only be determine by the Water Regulations/Byelaws (Scotland) department of the local Water Supplier in the area of installation, which will require a site specific risk assessment. Under Regulation/Byelaw 3 and schedule 2 paragraph 15, the installer must ensure sufficient backflow protection is provided in line with the findings of the risk assessment. R008 applies to the solenoid inlet.

Size:

¾” BSP (M) (to solenoid)

Marking:

Fagor, Serial No., Model No., Ref No., manufacturing date (MM/YY) and other technical information on top panel. Fagor on front casing. Range name on front panel.

Installation Requirements:

R001 R008 R009 R160

Expiry date:

31/10/2026

Proviso:

Discharge to drain must be via a Type AA, AB or AD air gap or in accordance with EN 1717.

Model:

‘Concept’ & ‘Advance’ range: C-061-E-D, C-061-E-I, CW-061-E-D, CW-061-E-I, A-061-E-D, A-061-E-I, AW-061-E-D, AW-061-E-I, C-101-E-D, C-101-E-I, CW-101-E-I, CW-101-E-D, A-101-E-D, A-101-E-I, AW-101-E-D, AW-101-E-I, C-102-E-D, C-102-E-I, CW-102-E-D, CW-102-E-I, A-102-E-D, A-102-E-I, AW-102-E-D, AW-102-E-I, C-201-E, C-201-E-C, CW-201-E, CW-201-E-C, A-201-E, A-201-E-C, AW-201-E, AW-201-E-C, C-202-E, C-202-E-C, CW-202-E, CW-202-E-C, A-202-E, A-202-E-C, AW-202-E, AW-202-E-C, C-0623-E-D, CW-0623-E-D, A-0623-E-D, AW-0623-E-D, C-061-G-D, C-061-G-I, CW-061-G-D, CW-061-G-I, A-061-G-D, A-061-G-I, AW-061-G-D, AW-061-G-I, C-101-G-D, C-101-G-I, CW-101-G-D, CW-101-G-I, A-101-G-D, A-101-G-I, AW-101-G-D, AW-101-G-I, C-102-G-D, C-102-G-I, CW-102-G-D, CW-102-G-I, A-102-G-D, A-102-G-I, AW-102-G-D, AW-102-G-I, C-201-G, C-201-G-C, CW-201-G, CW-201-G-C, A-201-G, A-201-G-C, AW-201-G, AW-201-G-C, C-202-G, C-202-G-C, CW-202-G, CW-202-G-C, A-202-G, A-202-G-C, AW-202-G, AW-202-G-C, Where: C prefix = Concept models. A prefix = Advance models. E = Electric oven. G = Gas oven. W = Oven with automatic washing system. Numbers denote the capacity of the oven: 0623: 6 trays GN-2/3. 061: 6 trays GN-1/1 - 12 trays GN-1/2. 101: 10 trays GN-1/1 - 20 trays GN-1/2. 102: 10 trays GN-2/1 - 20 trays GN-1/1. 201: 20 trays GN-1/1 - 40 trays GN-1/2. 202: 20 trays GN-2/1 - 40 trays GN-1/1. I = Left door opening. R = Right door opening. C = Model with trolley.

Approval Holder:

Fagor Industrial S Coop.

Company Name

Fagor Industrial S Coop.

Address

Barrio Sancholopetegui 22 20560 - Oñati

Country

Spain

Phone

+34 943 71 80 30

General Email

info@fagorindustrial.com

View All Listings by this Company

Manufacturer:

Fagor Industrial S Coop.

Company Name

Fagor Industrial S Coop.

Address

Barrio Sancholopetegui 22 20560 - Oñati

Country

Spain

Phone

+34 943 71 80 30

General Email

info@fagorindustrial.com

View All Listings by this Company

Range of flow switches incorporating brass or stainless steel bodies. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.

Section:

1718 Switches

Section Subtitle:

Flow control.

WRAS Approval Number:

2112314

Size:

VH308M/VHS08M prefix models:¼” BSP (F), VH310M/VHS10M prefix models:⅜” BSP (F), VH305M/VHS05M/VHS06M prefix models: ½” BSP (M), VH315M/VHS15M prefix models: ½” BSP (F), ½” BSP (M), ¾” BSP (M), VH320M/VHS20M prefix models: ¾” BSP (F), VH325M/VHS25M prefix models: 1” BSP (F), VH332M/VHS32M prefix models: 1¼” BSP (F), VH340M/VHS40M prefix models: 1½” BSP (F), VH350M/VHS50M prefix models: 2” BSP (F).

Marking:

SIKA logo (Sika), model no., date of manufacture (WWYY) and other technical data on adhesive label on switch head (VHS models) or attached to cable (VH3 models). Flow arrow on switch head.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

Type series VH3 and VHS Model keycode #1: VH3abMcdefghij and VHSabMcdefghij ab: for design and nominal pipe size: 05 (brass or s/steel models), 06 (brass models only) = direct insertion installation in the pipe with threaded adapter. M: magnet version. c: for magnet version: 0…9 = various magnet positions. d: for material of paddle system: 1 = brass, 3 = stainless steel, 5 = brass/stainless steel. e: for electrical output signal various - can be 0…9, examples 1 = reedswitch NO closes at increasing flow, 9 = reedswitch NC opens at decreasing flow) f: for cable and plug version: Various – can be 0…9 or A…Z, examples 0 = PVC-2x0,75 mm², Z = PVC-2x0,5 mm². g: for body material 1 = brass, 3 = stainless steel. hi: for process connection (3A & 4A not available on stainless steel models). 1I = G1/4 female, 2I = G3/8 female, 3I = G1/2 female, 3A = G1/2 male, 4A = G3/4 male, 4I = G3/4 female, 5I = G1 female, 6I = G1 1/4 female, 7I = G1 1/2 female, 8I = G2 female, 2R = Threaded adapter G1/2 male. j: for material of pipe section and threaded adapter: 0 = without, 1 = brass, 3 = stainless steel. Model keycode #2: VH3abMcyyyyyzz and VHSabMcyyyyyzz ab: for design and nominal pipe size: 08…50 = nominal pipe size of the pipe section. 05 (brass or s/steel models), 06 (brass models only) = direct insertion installation in the pipe with threaded adapter. M: magnet version. c: for magnet version: 0…9 = various magnet positions. yyyyy: for name of customer (5 digits, e.g. SCHMI, MUELL, …). zz: for consecutive number (2 digits, 01…99). VH3abMcyyyyyzz / VHSabMcyyyyyzz are customized versions, but technically identical with VH3abMcdefghij / VHSabMcdefghij regarding all parts/components in contact with wholesome water.

Approval Holder:

SIKA Systemtechnik GmbH

Company Name

SIKA Systemtechnik GmbH

Address

Struthweg 7-9 Kaufungen

Postcode

34260

Country

Germany

Phone

+49 5605 803 652

General Email

grass@sika.net

View All Listings by this Company

Manufacturer:

SIKA Dr. Siebert & Kühn GmbH & Co. KG

Company Name

SIKA Dr. Siebert & Kühn GmbH & Co. KG

Address

Struthweg 7-9 Kaufungen

Postcode

34260

Country

Germany

Phone

+49 5605 803 652

General Email

grass@sika.net

View All Listings by this Company

Range of flow sensors with brass or plastic bodies. Flow sensor type series VTY10 (plastic body, G3/4): Maximum working pressure 10.0 bar. Maximum operating temperature 85°C. Flow sensor type series VTY10 (plastic body, Quickfasten OD 22.5mm): Maximum working pressure 10.0 bar. Maximum operating temperature 70°C. Flow sensor type series VTY10 (brass body, G1/2): Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.

Section:

1718 Switches

Section Subtitle:

Flow control.

WRAS Approval Number:

2111343

Size:

Brass body: ½” BSP (M). Plastic body: ¾” BSP (M), OD 22.5mm.

Marking:

SIKA, address, model, date of manufacture batch code (WWYY) and other technical info on adhesive label on cable. SIKA and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

Type series VTY10 Model keycode #1: VY1030abcdefgh ab: for body material: MA = brass body CW617N-DW, K5 = plastic body. cd: for sensor and signal output HN = Hall sensor-NPN, 00 = without sensor. ef: for electrical cable connection: Various - in combination can be 00…99 or AA…ZZ, examples 05 = 500mm, 12=1200mm, X1=80mm with Molex plug connector. gh: for process connection A3 = G1/2 male thread, A4 = G3/4 male thread, Q1 = quick fasten, YY = without, only possible with ab = K5. Model keycode #2: VY1030abyyyyyzz or VY1030ayyyyyzz ab: for body material: MA = brass body CW617N-DW, K5 = plastic body. Or a: for body material: M = brass body CW617N-DW. yyyyy: for name of customer (5 digits, e.g. SCHMI, MUELL, …). zz: for consecutive number (2 digits, 01…99). VY1030abyyyyyzz and VY1030ayyyyyzz are customized versions, but technically identical with VY1030abcdefgh regarding all parts/components in contact with wholesome water.

Approval Holder:

SIKA Systemtechnik GmbH

Company Name

SIKA Systemtechnik GmbH

Address

Struthweg 7-9 Kaufungen

Postcode

34260

Country

Germany

Phone

+49 5605 803 652

General Email

grass@sika.net

View All Listings by this Company

Manufacturer:

SIKA Systemtechnik GmbH

Company Name

SIKA Systemtechnik GmbH

Address

Struthweg 7-9 Kaufungen

Postcode

34260

Country

Germany

Phone

+49 5605 803 652

General Email

grass@sika.net

View All Listings by this Company

Turbine flow sensors with a plastic bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C

Section:

1719 Flow Activated Switches

Size:

OD 30mm

Marking:

MARQUARDT logo, customer number, model number and date of manufacture (XXYYMMDD) on adhesive label attached to wiring. Flow arrow on body

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

2061.3101. Model added August 2023: 2061.3102. Model added October 2024: 2061.3103.

Approval Holder:

Marquardt GmbH

Company Name

Marquardt GmbH

Address

Schloss-Strasse 16, 78604 Rietheim-Weilheim Germany

View All Listings by this Company