Directory Search Results

Print List

#2110328

Range of urinal flushing mechanisms with a solenoid valve controlling the flow. The valves are controlled via an infra-red sensor. The inlet incorporates a stainless steel strainer and flow regulator. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1307 Flushing Mechanisms
Section Subtitle:
Urinals.
WRAS Approval Number:
2110328
Size:
15mm compression
Marking:
Kinetic & Dudley on control unit. Kinetic, Dudley, model No, address, contact details & other tech info on adhesive lebel on control unit rear. Filter side & flow arrow on body.
Installation Requirements:
R001 R075 R120
Expiry date:
31/10/2026
Model:
PSPKIN327877 PSPKIN327878

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2111023

‘Aquila V4 C1’ range of water meters (brass or bronze bodies) with a plastic working chamber, flow regulator and impellor, and either NBR or EPDM ‘O’-rings. The products are supplied with loose NBR/fibre flange gaskets. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1505 Water Meters
Size:
DN50 - DN100 flanged
Marking:
DIEHL logo on cap. DIEHL METERING, CE, temperature, maximum pressure and other technical information on meter face. Flow arrow and size on body
Installation Requirements:
R001
Expiry date:
30/11/2026
Model:
Aquila V4 C1: Brass bodies: DN 50 and DN 65 length 300 mm Bronze bodies: DN 80 and DN 100 length 350 mm

Approval Holder:
Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.
Company Name
Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.
Country

View All Listings by this Company
Manufacturer:
Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.
Company Name
Diehl Metering S.A.S & Diehl Metering Sp. Z o.o.
Country

View All Listings by this Company

Print This Approval


#2111043

A range of water meters incorporating brass or plastic bodies (See models), EDPM ‘O’-rings, plastic strainer on the inlet and a plastic impellor. Maximum working pressure 16.0 bar. Maximum working temperature 85°C (brass bodies) or cold water use only (plastic bodies)

Section:
1505 Water Meters
Size:
DN 15 models – ¾” BSP (M) DN 20 models – 1” BSP (M)
Marking:
Zenner, Q3, year of manufacture (YYYY), max operating pressure and other technical info on face plate. Flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/11/2026
Model:
Minomess A Brass Minomess A Plastic

Approval Holder:
Zenner International Gmbh & Co. KG
Company Name
Zenner International Gmbh & Co. KG
Address
Heinrich‐Barth‐Str. 29, 66115 Saarbrücken, Germany
Country
Germany

View All Listings by this Company
Manufacturer:
Zenner Meters (Shanghai) Ltd.
Company Name
Zenner Meters (Shanghai) Ltd.
Address
No 15 Dongxing Road Songjiang Ind Zone Shanghai
Country
China

View All Listings by this Company

Print This Approval


#2110358

Range of water meter assemblies which incorporating DZR brass bodies, spherical valve and pressure reducing valve (1.5 to 6.0 bar range). The products incorporate two approved, in-line single check valve cartridges, (verified by test, suitable for backflow protection against Fluid Category 3). Fitting is also supplied with a pressure guage. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Size:
¾” with straight connector or meter connection. 1” with straight connector or meter connection.
Marking:
Essco Controls, CR, flow arrow and size on body.
Installation Requirements:
R001
Expiry date:
31/10/2026
Model:
ESS-90501035 PRV-CON. ESS-90501101 PRV-CON. ESS-90501035 CARRIER PRV-CON. ESS-90501101 CARRIER PRV-CON.

Approval Holder:
Essco Controls Ltd (T/A Essco Group)
Company Name
Essco Controls Ltd (T/A Essco Group)
Address
J1 Adanac North Adanac Drive Southampton
Postcode
SO16 0BT
Country
United Kingdom
General Email
mike.bennett@esscogroup.co.uk

View All Listings by this Company

Print This Approval


#2110339

Range of meter boxes incorporating a plastic manifold arrangement consisting of a stop valve with non-rising spindle , check valve (however the complete assembly has not been tested to demonstrate it provides adequate backflow) and concentric meter port. Some models incorporate a drain off or blacking plug. Connections can be compression or push fit (see model). For use with PE8-0 pipe to BS EN 12201 and copper to EN 1057. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1525 Meter Chambers - Wall Mounted
Size:
see model
Marking:
Talis logo, Talbot, flow arrow, pressure, inlet & outlet on body.
Installation Requirements:
R001 R430
Expiry date:
31/10/2026
Model:
Drain off model: WA3261515AM – 15mm x 15mm WA3261522AM – 15mm x 22mm WA3262215AM – 22mm x 15mm WA3262222AM – 22mm x 22mm WA3262515AM – 25mm p/f x 15mm WA3262522AM – 25mm p/f x 15mm Blanking plug model: WA3271515BM – 15mm x 15mm WA3271522BM – 15mm x 22mm WA3272215BM - 22mm x 15mm WA3272222BM – 22mm x 22mm WA3272515BM – 25mm p/f x 15mm WA3272522BM – 25mm p/f x 22mm

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 183 of 2360

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.