Range of water meters with brass bodies and plastic turbines. The inlet incorporates a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Size:

¾” BSP (M) inlet/outlet (DN15). 1” BSP (M) inlet/outlet (DN20). 1¼” BSP (M) inlet/outlet (DN25). 1½” BSP (M) inlet/outlet (DN32) 2” BSP (M) inlet/outlet (DN40)

Marking:

Genebre, year of manufacture (yy), ‘NWM’ & technical info on dial facer. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

6110C 6115C 6120C 6111C 6121C

Approval Holder:

Genebre, S.A

Company Name

Genebre, S.A

Address

Poligono Industrial Pedrosa, Avinguda Joan Carles I, 46 – 48, Edificio GENEBRE Hospitalet de Llobregat

Postcode

08908

Country

Spain

Phone

(+34) 93 298 80 00

General Email

cazorla@genebre.es

View All Listings by this Company

Range of flexible joints incorporating an EPDM (inner & outer) joint with a steel reinforcing ring and two carbon steel flanges. Maximum operating pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

1530 Miscellaneous Fittings

Size:

DN32 - DN150 flange

Marking:

DST Group on adhesive label on body DN, PN & YY/MM etched on body

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

PF16W032 PF16W040 PF16W050 PF16W065 PF16W080 PF16W100 PF16W125 PF16W150

Approval Holder:

DST Group Ltd

Company Name

DST Group Ltd

Address

Piksa House 2 Penrod Way Heysham

Postcode

LA3 2UZ

Country

United Kingdom

Phone

01524 389 494

General Email

sharronwood@dstgroup.co.uk

View All Listings by this Company

Range of accumulators. The brass vessel connector of the ACC-060-TNK, ACC-120-TNK and ACC-180-TNK models incorporates a plastic flow regulator. Maximum working pressure 8.6 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless-steel braided EPDM lined flexible hose assembly with ¾” captive nut end connection

Marking:

Salamander Pumps and model number on adhesive label on body.

Installation Requirements:

R001 R009

Expiry date:

30/04/2030

Model:

ACC-060-TNK, ACC-120-TNK, ACC-180-TNK, ACC-330-TNK & ACC-450-TNK.

Approval Holder:

Salamander Pumps

Company Name

Salamander Pumps

Postcode

SR5 3XE

Country

United Kingdom

Phone

0191 535 4528

General Email

lewisw@salamanderpumps.co.uk

View All Listings by this Company

Manufacturer:

Salamander Pumps

Company Name

Salamander Pumps

Postcode

SR5 3XE

Country

United Kingdom

Phone

0191 535 4528

General Email

lewisw@salamanderpumps.co.uk

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 4.0 bar. Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102721

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

ESPA, model & technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

ESPH XXS-XX\XX 1.XX:Rated flow(m³/h),range:2、3、4、8、10、12、16、20m³/h 2.XX:Impeller progession (1,2,3,4,5,6,7)*5 3.xx:Small Impeller (1) 4.End connection mode and size Rated flow(2、3m³ /h) :G1"XG1" Rated flow(4m³ /h) :G1¼"XG1" Rated flow(8、10、12m³ /h) :G1½"XG1½" Rated flow(16、20m³ /h) :G2"XG2"

Approval Holder:

ESPA

Company Name

ESPA

Address

PO Box 8156 Warehouse Q4 - 123 Sharjah Airport Free Zone, Sharjah

Country

United Arab Emirates

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102722

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

ESPA, model & technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

MULTI VSXXX-XX-(1/2/C/D/2C/2D/C-D) -(F/N) -E 1. XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2. XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2，On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4. F/N: the materials of wetted parts --N，material is SUS 316. --F，material is SUS 304. 5. E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150

Approval Holder:

ESPA

Company Name

ESPA

Address

PO Box 8156 Warehouse Q4 - 123 Sharjah Airport Free Zone, Sharjah

Country

United Arab Emirates

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102723

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

TPF on cover. TPF, model & technical information on data label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

TPVSXXX-XX-(1/2/C/D/2C/2D/C-D) -(B) -E 1.XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2.XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2 ， On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4.B: the materials of wetted parts --B，material is SUS 316. --None，material is SUS 304. 5.E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150 THM(-3)XX-XX\XX-SE 1. -3: different phase. -- -3: three phase，none: single phase. 2.XX: Rated flow（m³/h），range: 2、3、4、8、10、12、 16、20m³/h. 3.XX: impeller progession (1,2,3,4,5,6,7) 4.XX: Small Impeller（1,2,3,4,5, ） 5.SE: SE Intelligent Type End connection mode and size Rated flow (2、3m³ /h) :G1"XG1" Rated flow (4m³ /h) :G1¼"XG1" Rated flow (8、10、12m³ /h) :G1½"XG1½" Rated flow (16、20m³ /h) :G2"XG2"

Approval Holder:

TADMUR PUMP FACTORY WLL

Company Name

TADMUR PUMP FACTORY WLL

Address

P.O. BOX 212023 DOHA

Country

Qatar

View All Listings by this Company

Range of combined storage and booster sets, incorporating a cold-water storage cistern, submersible pump, solenoid valve or alternative actuated ball valve, non-return valve (not suitable for backflow protection), isolation valves and expansion vessel. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250304718

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (F)

Marking:

Dutypoint, model & product info on label.

Installation Requirements:

R001 R415

Expiry date:

31/03/2030

Model:

Dutypoint Systems ScubaTANK range comprising of models: ‘ WX A BBBB CCC’ – where: ‘A’ denotes number of pumps and is replaced with 1 or 2. ‘BBBB’ denotes pump size and is replaced with 3040, 3060, 3080, 3100, 5040, 5060, 5080, 5100, 9040, 9060 or 9090. ‘CCC’ denotes size of storage cistern in litres and is replaced with 175, 300, 375, 440, 490, 490, 575, 650, 750, 800, 1050, 1250, 1650 or 2250.

Approval Holder:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Manufacturer:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

“TPE 2 & TPE3 series” single stage centrifugal pumps, incorporating cast iron (with black coloured electrocoating) or stainless-steel bodies and plastic impellers. Maximum working pressure: Cast iron models: 16.0 bar, Stainless steel models: 10.0 bar. Maximum operating temperature: Cast iron models: 60°C, Stainless steel models: 85°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250307702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Cast iron models: DN32 - DN100 Flanged inlet/outlet. Stainless steel models: DN32 - DN65 Flanged inlet/outlet.

Marking:

Grundfos and Grundfos logo, type, model, product no., technical info and manufacturing country on data plate. Grundfos and Grundfos logo on control unit.

Installation Requirements:

R001 R415

Expiry date:

31/03/2030

Model:

TPE2/3 series: TPE 2 or 3 (E) XX-XXX S or N - A or AI or X - F - A or I - XXXX - YYY Where: TPE2 = pump type with normal Asynchronous motor. TPE3 = pump type with E-motor (motor with integrated frequency driver). XX = nominal DN size of inlet/outlet ports (cast iron 32 - 100, S/Steel 32 - 65). XXX = maximum head (dm). S or N = S: Built-in differential-pressure and temperature sensor (TPE3 models), N: Without built-in sensor (TPE2 models). A or AI or X = A: Basic version, AI: PN6 flange, X: Special Version. F = DIN Flanged. A or I = A: Basic Version. Cast iron pump housing and motor stool, I: S/Steel pump housing and motor stool. XXXX = shaft seal type - BQQE or BQBE. YYY = coding for motor. E.g. TPE3 100-120 S-X-F-A-BQQE-GAB

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

BOSS Range of Y-pattern strainers with DZR brass bodies and stainless steel strainers. The compression connection is for use with copper pipe to BS EN1057. Maximum working pressure 20 bar (BSP threaded models ½”-2”), 16.0 bar (compression models). Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

BOSS, date of manufacture: MM-YY, CR & flow arrow on body

Installation Requirements:

R001 R120

Expiry date:

31/08/2030

Model:

10460003 - 15MM BOSS 46W Y STRAINER DZR 1/2" BSP (F) 10460014 - 20MM BOSS 46W Y STRAINER DZR 3/4" BSP (F) 10460025 - 25MM BOSS 46W Y STRAINER DZR 1" BSP (F) 10460036 - 32MM BOSS 46W Y STRAINER DZR 1-1/4" BSP (F) 10460047 - 40MM BOSS 46W Y STRAINER DZR 1-1/2" BSP (F) 10460058 - 50MM BOSS 46W Y STRAINER DZR 2" BSP (F) 10460110 - 15MM BOSS 46CW Y STRAINER DZR 15MM Compression 10460121 - 22MM BOSS 46CW Y STRAINER DZR 22MM Compression

Approval Holder:

BSS Industrial

Company Name

BSS Industrial

Address

Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of pillar taps (chromium plated brass) with quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener, and the product is supplied with a metal back nut. Maximum working pressure 16.0 Bar Maximum operating temperature 85.0°C

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

250302043

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2” BSP (M) (4E1280 & 4E1024) 3/4” BSP (M) (4E1281)

Marking:

Instinct logo on operating member

Installation Requirements:

R001 R006

Expiry date:

31/03/2030

Model:

4E1281 4E1280 4E1024

Approval Holder:

Standard Hidráulica, S.A.U

Company Name

Standard Hidráulica, S.A.U

Address

Avenida de la Ferreria 73 Montcada i Reixac

Postcode

08110

Country

Spain

General Email

Jorge.casado@sth.email

View All Listings by this Company