’TP Series 300’ and ‘TPE Series 300’ ranges of single stage in-line pumps with black coloured cataphoretic electro deposition coated cast iron or ductile iron bodies and bronze, stainless-steel or black coloured cataphoretic electro deposition coated cast iron impellers. Pumps are available with BQQE or BBQE shaft seals. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250607701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN32 - DN350 Flanged connections.

Marking:

Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, type, model, PN-SN no., technical info and manufacturing country on data plate on motor stool.

Installation Requirements:

R001 R415

Expiry date:

30/06/2030

Model:

TP series 300: TP(E) XX-XXX/X [Blank] or S or NC - X or BX - F - A or B or S or O or Y or Q - XXXX * Where: TP = pump type with normal Asynchronous motor. TPE = pump type with E-motor (motor with integrated frequency driver). XX = nominal diameter of inlet and outlet ports, DN (32-350). XXX = maximum head [dm] (60-1050). /X = pole number (2, 4, 6). [Blank] or S or NC = Sensor options: [Blank] = without sensor, S = TPE with factory-fitted differential-pressure sensor, NC = TPE with Siemens/Nidec motor with integrated CUE (Grundfos brand of VSD). X or BX = B: Oversize motor, X: Special version. F = DIN flange. A or B or S or O or Y or Q = A: Basic version - Cast iron pump housing and impeller, B: Cast iron pump housing with bronze impeller, S: Cast iron pump housing with stainless steel impeller, O: Ductile cast iron pump housing with cast iron impeller, Y: Ductile cast iron pump housing with bronze impeller, Q = Ductile cast iron pump housing with stainless steel impeller. XXXX = shaft seal: BQQE or BBQE. * = Motor information, does not have any bearing on water contact parts.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Section:

1650 Shower Outlets

Description:

A Shower head(s) and/or shower handset(s).

Wall Mounted Shower head

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

30/04/2030

Notes & Further Information

New model added February 2026: RP3 VR1000

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

1650 Shower Outlets

Description:

A Shower head(s) and/or shower handset(s).

Overhead shower

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

30/07/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of wall or ceiling mounted shower outlets with chromium plated bodies (or black body for 22123KF0) consisting of showers arms and shower head for installation with specific rough-in sets. Shower head bodies incorporate approved single check valve cartridges, however, the complete assemblies have not been tested to demonstrate it provides backflow protection. The 26.484 model rough-in set incorporates a plastic flow regulator on the inlet. Maximum working pressure: Open Outlet. Maximum operating temperature: 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250602028

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Any flow rates claimed by the manufacturer have not been verified

Size:

½” BSP (F).

Marking:

Showerheads: Grohe on face. Concealed bodies: Grohe, Date of manufacture (YYMMDD), Made in Germany on adhesive label inside plastic shell, Grohe, DR and Flow arrows on brass body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

Grohe ‘RSH’ Cosmopolitan 310’ headshower sets 400mm: 26.475.xxx & 26.479.xxx. Grohe ‘RSH’ Smart Active 310’ headshower sets 400mm: 22123KF0 Concealed bodies (rough-in sets): 26.483 & 26.484 Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite A00 – hard graphit BE0 – polished nickel DL0 – brushed warm sunset EN0 – brushed nickel GN0 – brushed cool sunrise GL0 – cool sunrise LS0 – moon white A00 – hard graphite

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

View All Listings by this Company

Range of in-line Y patterned strainers with bronze bodies and a stainless-steel mesh strainer. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Size: ½” to 2” BSPT (F), NPT (F) or BSPP (F)

Marking:

IVAL logo, size, PN, DN and flow arrow body

Installation Requirements:

R001 R120

Expiry date:

30/04/2030

Model:

S40

Approval Holder:

IVAL Hydronics UK Ltd

Company Name

IVAL Hydronics UK Ltd

Address

71-75 Shelton Street, Covent Garden, London.

Postcode

WC2H 9JQ

Country

United Kingdom

General Email

info@ival-hydronics.co.uk

View All Listings by this Company