Directory Search Results

Print List

#2104068

Range of gate valves incorporating ductile iron epoxy coted bodies and with EPDM ‘O’-ring seals and discs. The valves are operated via a non-rising spindle with a hand wheel operating member Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
2104068
Size:
DN 50-400 Flanged
Marking:
FGV, PN & DN on data plate. FGV, PN and DN on body.
Installation Requirements:
R001
Expiry date:
30/04/2026
Model:
FGV 440 RANGE OF GATE VALVES (DN50-400)
Product Images

Approval Holder:
FGV INTERNATIONAL FZE
Company Name
FGV INTERNATIONAL FZE
Address
PO BOX 20038, Dubai
Postcode
U.A.E

View All Listings by this Company

Print This Approval


#2106337

Range of gate valves with blue epoxy coated cast iron bodies, cast iron disc encapsulated in EPDM, stainless steel shaft and EPDM gaskets. The valves are operated via a non-rising spindle with a hand wheel operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
2106337
Size:
DN100 and DN250
Marking:
Bohai Valve Group Co., Ltd. logo (The letter ‘B’), DN, PN, batch number and other technical information on data plate on body, as well as on the body.
Installation Requirements:
R001
Expiry date:
30/06/2026
Model:
Z45X -16Q

Approval Holder:
Bohai Valve Group Co Ltd
Company Name
Bohai Valve Group Co Ltd
Address
No 88 Gaoying Road Beizhakou Town Jinnan District Tianjin
Country
China

View All Listings by this Company
Manufacturer:
Bohai Valve Group Co Ltd
Company Name
Bohai Valve Group Co Ltd
Address
No 88 Gaoying Road Beizhakou Town Jinnan District Tianjin
Country
China

View All Listings by this Company

Print This Approval


#2106036

Range of cold-water inlet control groups with DZR brass bodies consisting of an in-line, adjustable pressure reducing valve (PRV) (adjustable in the range of 0.8 bar - 6.0 bar, but factory pre-set at 3.0 or 3.5 bar - see model), strainer and a DZR brass bodied pressure relief valve (SRV) (set at 4.75 bar or 6.0 bar - see model). Products also incorporate an approved single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum supply pressure 16.0 bar. Maximum operating temperature 80°C.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2106036
Size:
22mm compression
Marking:
RBM on cap. CR, size and flow arrow on body.
Installation Requirements:
R001 R120
Expiry date:
30/06/2026
Model:
UVGS21822200.1 - 22mm INLET 3 BAR PRV, 4.75 BAR SRV, UNVENTED GROUP SET WITH 3/4" EXPANSION VESSEL CONNECTION. UVGS21822210.1 - 22mm INLET 3 BAR PRV, 6 BAR SRV, UNVENTED GROUP SET WITH 3/4" EXPANSION VESSEL CONNECTION. UGVS21822211 - 22mm INLET 3.5 BAR PRV, 6 BAR SRV, UNVENTED GROUP SET WITH 3/4" EXPANSION VESSEL CONNECTION. UVGS21822220.1 - 22mm INLET 3 BAR PRV, 6 BAR SRV, UNVENTED GROUP SET WITH 22mm EXPANSION VESSEL CONNECTION. UVGS21822260.1 - 22mm INLET 3 BAR PRV, 6 BAR SRV, UNVENTED GROUP SET NO VESSEL CONNECTION.

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company
Manufacturer:
RBM S.p.a.
Company Name
RBM S.p.a.
Address
Componenti Per Impianti Idrotermici Via S. Giuseppe, 1 25075 Nave (Brescia)
Country
Italy
General Email

View All Listings by this Company

Print This Approval


#2106021

Range of commercial washing machines with flow controlled by solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The products are supplied with three ¾” x ¾” BSP (F) double check valve assemblies (suitable for backflow protection against Fluid Category 3) for installation on each inlet prior to a HDPE inlet hose with ¾” x ¾” captive nut end connections. Maximum working pressure 5.7 Bar. Maximum operating temperature 60°C.

Section:
2370 Washing Machines
Section Subtitle:
Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2106021
Note:
This appliance incorporates a Fluid Category 5 backflow prevention device. The double check valve assemblies supplied with this product must be installed on all available inlets to maintain the validity of the WRAS approval. No detergents, softeners or other products are to be placed within the dispenser compartment that represent a risk greater than Fluid Category 3.
Size:
¾” BSP (F) (to double check valve assembly)
Marking:
Alliance Laundry logo, model, serial number, product info on label on back panel. Alliance laundry logo, model, serial number on label inside of door.
Installation Requirements:
R001 R160 R574
Expiry date:
30/06/2026
Model:
UCEXXX, SCEXXX, HCEXXX, ICEXXX & PCEXXX XXX denotes the drum capacity and can be replaced with the following digits representing lb’s: 020, 030, 040, 060, 080 & 100.

Approval Holder:
Alliance Laundry CE s.r.o
Company Name
Alliance Laundry CE s.r.o
Address
Místecká 1116, 742 58 Príbor
Country
Czech Republic
Phone
+420 556 768 885

View All Listings by this Company

Print This Approval


#2107011

Range of commercial dishwashers with flow controlled by a solenoid valve and discharged via a type AB air gap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 4.0 bar. Cold water use only.

Section:
2390 Washing Machines
Section Subtitle:
Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:
2107011
Size:
¾” BSP (F)
Marking:
Colged on front panel. Colged, Eurotec, model, serial number, date of manufacture (DD/MM/YYYY) and other product info on label on side panel.
Installation Requirements:
R001 R574
Expiry date:
31/07/2026
Model:
TopTech 34-23TD (rack 40x40), TopTech 35-23TD (rack 45x45), TopTech 36-23TD (rack 50x50), TopTech 36L-23TD (rack 50x60), TopTech 38-23TD (rack 50x50 hood type), TopTech 39-23TD (rack 50x60 hood type).
Product Images

Approval Holder:
Eurotec Srl div Colged
Company Name
Eurotec Srl div Colged
Address
Via Provinciale Romana 6-55010 Badia Pozzeveri Italy

View All Listings by this Company
Manufacturer:
Eurotec Srl div Colged
Company Name
Eurotec Srl div Colged
Address
Via Provinciale Romana 6-55010 Badia Pozzeveri Italy

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 168 of 1560

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.