Directory Search Results

Print List

#250704027

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
250704027
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided EPDM lined flexible hose assembly with 15mm compression end connections.
Marking:
CAL logo on rear of operating member
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2030
Model:
ACT2080

Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Country
United Kingdom
Phone
01226 283434
General Email
info@abode.eu

View All Listings by this Company

Print This Approval


#250612002

Range of single hole, single outlet (swivel) combination tap assemblies (brass body, various finishes - see model), incorporating quarter turn ceramic disc or ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. The inlets of the TKUBEDLXX, TKUBESLXX and TQUADDLCM/ models are supplied with a loose ½”x½” BSP (M) chrome plated brass housing. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
250612002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
TAQCLASSDLXX/XX models: 15mm copper tails. TKUBEDLXX and TQUADDLCM/ models: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
TKUBESLCM/ and TKUBESLMB models: Rangemaster on operating member. All other models: Rangemaster on body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2030
Model:
¼ turn ceramic disc models: AQUACLASSIC DUAL LEVER TAP: TAQCLASSDLAB/WH (ANTIQUE BRASS), TAQCLASSDLCM/WH (CHROME/WHITE), TAQCLASSDLBF/BF (BRUSHED CHROME), TAQCLASSDLCM/CM (CHROME). KUBE DUAL LEVER TAP: TKUBEDLCM/ (CHROME), TKUBEDLMB/ (MATT BLACK). QUAD DUAL LEVER TAP: TQUADDLCM/ (CHROME). Ceramic cartridge models: KUBE SINGLE LEVER TAP: TKUBESLCM/ (CHROME), TKUBESLMB/ (MATT BLACK).
Product Images

Approval Holder:
AGA Rangemaster Ltd
Company Name
AGA Rangemaster Ltd
Address
Meadow Lane, Long Eaton, Nottingham
Postcode
NG10 2GD
Phone
+44 (0) 115 946 4000
General Email
info@agarangemaster.co.uk

View All Listings by this Company

Print This Approval


#2309385

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2309385
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections
Marking:
"Leisure" brand of AGA Rangemaster etched on front & SMR etched on rear of body
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2028
Model:
AQUACLEAR
Product Images

Approval Holder:
AGA Rangemaster Leisure Limited
Company Name
AGA Rangemaster Leisure Limited
Address
Meadow Lane, Long Eaton, Nottingham
Postcode
NG10 2GD

View All Listings by this Company
Manufacturer:
San Marco Rubinetteria Srl
Company Name
San Marco Rubinetteria Srl
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Country
Italy
Phone
+39 15765 5244

View All Listings by this Company

Print This Approval


#241113019

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
241113019
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX line flexible hose assemblies with ½” captive nut end connections.
Marking:
Rangemaster on base of tap body
Installation Requirements:
R001 R009 R010 R006
Expiry date:
31/10/2029
Model:
Monorise Dual Lever & Aquaquad 2 Dual Lever.
Product Images

Approval Holder:
AGA Rangemaster Ltd
Company Name
AGA Rangemaster Ltd
Address
Meadow Lane, Long Eaton, Nottingham
Postcode
NG10 2GD
Phone
+44 (0) 115 946 4000
General Email
info@agarangemaster.co.uk

View All Listings by this Company

Print This Approval


#240604039

Range of single hole, single outlet (swivel) combination tap assemblies with (stainless steel bodies - various finishes), incorporating a ceramic cartridge headwork controlling the hot and cold with a single lever operating member. The boiling and purified water is controllied via a ceramic disc headwork incorporating a manual override button and a dome type headwork. Maximum working pressure 8.0 bar. Maximum operating temperature for boiling water pathway: 98 °C; for other water pathway: 85 °C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
240604039
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Hot – Stainless steel braided PEX lined flexible hose assemblies incorporating a ½” BSP (F) captive nut end connection. Cold - Stainless steel braided PEX lined flexible hose assemblies incorporating a 3/8” BSP (F) captive nut end connection ½” (F) x 3/8” (M) x 3/8” (M) tee connector.
Marking:
Alfred Victoria "crown" brand marking on body
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2029
Model:
BOT01CR, BOT01K & BOT01BB BOT02CR, BOT02K & BOT02BB BOT03CR, BOT03K & BOT03BB BOT04CR, BOT04K & BOT04BB BOT05CR, BOT05K & BOT05BB BOT06CR, BOT06K & BOT06BB Suffix CR = Chrome, K = Black & BB = Zirconium gold brushed

Approval Holder:
ALFRED VICTORIA LIMITED
Company Name
ALFRED VICTORIA LIMITED
Postcode
B45 9AL

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1657 of 1714

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.