Range of copper end feed fittings for use with copper tube. For above and below ground use. Maximum working pressure 25.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101811

Size:

SEE MODEL

Marking:

Conex >B< logo and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Straight Coupler Straight Coupler 8mm 5270 008000000 10mm 5270 010000000 12mm 5270 012000000 15mm 5270 015000000 22mm 5270 022000000 28mm 5270 028000000 35mm 5270 035000000 42mm 5270 042000000 ,54mm 5270 054000000 67mm 5270 067000000 76mm 5270 076000000 108mm 5270 108000000 Slip Coupler Slip Coupler 15mm 5270S015000000 22mm 5270S022000000 28mm 5270S028000000 35mm 5270S035000000 42mm 5270S042000000 54mm 5270S054000000 Reducing Coupler Reducing Coupler 10mmX8mm 5240 010008000 15mmX8mm 5240 015008000 15mmX10mm 5240 015010000 15mmX12mm 5240 015012000 22mmX15mm 5240 022015000 28mmX15mm 5240 028015000 28mmX22mm 5240 028022000 35mmX15mm 5240 035015000 35mmX22mm 5240 035022000 35mmX28mm 5240 035028000 42mmX22mm 5240 042022000 42mmX28mm 5240 042028000 42mmX35mm 5240 042035000 54mmX15mm 5240 054015000 54mmX22mm 5240 054022000 54mmX28mm 5240 054028000 54mmX35mm 5240 054035000 54mmX42mm 5240 054042000 Fitting Reducer Fitting Reducer 10mmX8mm 5243 010008000 12mmX8mm 5243 012008000 15mmX8mm 5243 015008000 15mmX10mm 5243 015010000 15mmX12mm 5243 015012000 22mmX15mm 5243 022015000 28mmX15mm 5243 028015000 28mmX22mm 5243 028022000 35mmX15mm 5243 035015000 35mmX22mm 5243 035022000 35mmX28mm 5243 035028000 42mmX15mm 5243 042015000 42mmX22mm 5243 042022000 42mmX28mm 5243 042028000 42mmX35mm 5243 042035000 54mmX15mm 5243 054015000 54mmX22mm 5243 054022000 54mmX28mm 5243 054028000 54mmX35mm 5243 054035000 54mmX42mm 5243 054042000 67mmX28mm 5243 067028000 67mmX35mm 5243 067035000 67mmX42mm 5243 067042000 67mmX54mm 5243 067054000 76mmX35mm 5243 076035000 76mmX42mm 5243 076042000 76mmX54mm 5243 076054000 76mmX67mm 5243 076067000 108mmX54mm 5243 108054000 108mmX67mm 5243 108067000 108mmX76mm 5243 108076000 End cap End Cap 10mm 5301 010000000 8mm 5301 008000000 15mm 5301 015000000 22mm 5301 022000000 28mm 5301 028000000 35,35mm 5301 035000000 42mm 5301 042000000 54mm 5301 054000000 Equal Tee Equal Tee 8mm 5130 008008008 10mm 5130 010010010 12mm 5130 012012012 15mm 5130 015015015 22mm 5130 022022022 28mm 5130 028028028 35mm 5130 035035035 42mm 5130 042042042 54mm 5130 054054054 67mm 5130 067067067 76mm 5130 076076076 108mm 5130 108108108 Partial Crossover Partial Crossover 15mm 5086 015000000 22mm 5086 022000000 Full crossover Full crossover 15mm 5085 015000000 22mm 5085 022000000 Imperial coupler Imperial coupler 15mmX1/2" 5241 015004000 22mmX3/4" 5241 022006000 28mmX1" 5241 028008000 90° Elbow 90° Elbow 8mm 5090 008000000 10mm 5090 010000000 15mm 5090 015000000 22mm 5090 022000000 28mm 5090 028000000 35mm 5090 035000000 42mm 5090 042000000 54mm 5090 054000000 67mm 5090 067000000 76mm 5090 076000000 108mm 5090 108000000 90° Street Elbow 90° Street Elbow 10mm 5092 010000000 15mm 5092 015000000 22mm 5092 022000000 28mm 5092 028000000 35mm 5092 035000000 42mm 5092 042000000 44mm 5092 054000000 45° Elbow 45° Elbow 15mm 5041 015000000 22mm 5041 022000000 28mm 5041 028000000 35mm 5041 035000000 42mm 5041 042000000 54mm 5041 054000000 67mm 5041 067000000 76mm 5041 076000000 108mm 5041 108000000 45° Street Elbow 45° Street Elbow 15mm 5040 015000000 22mm 5040 022000000 28mm 5040 028000000 35mm 5040 035000000 42mm 5040 042000000 54mm 5040 054000000 Reducing Tee (LXRXM) Reducing Tee 15mmX15mmX10mm 5130 015010015 15mmX15mmX12mm 5130 015012015 22mmX22mmX15mm 5130 022015015 28mmX28mmX15mm 5130 028028015 28mmX28mmX22mm 5130 028028022 35mmX35mmX15mm 5130 035015035 35mmX35mmX22mm 5130 035022035 35mmX35mmX28mm 5130 035028035 42mmX42mmX15mm 5130 042015042 42mmX42mmX22mm 5130 042022042 42mmX42mmX28mm 5130 042028042 42mmX42mmX35mm 5130 042035042 54mmX54mmX15mm 5130 054015054 54mmX54mmX22mm 5130 054022054 54mmX54mmX28mm 5130 054028054 54mmX54mmX35mm 5130 054035054 54mmX54mmX42mm 5130 054042054 67mmX67mmX28mm 5130 067028067 67mmX67mmX35mm 5130 067035067 67mmX67mmX42mm 5130 067042067 67mmX67mmX54mm 5130 067054067 76mmX76mmX28mm 5130 076028076 76mmX76mmX35mm 5130 076035076 76mmX76mmX42mm 5130 076042076 76mmX76mmX54mm 5130 076054076 76mmX76mmX67mm 5130 076067076 108mmX108mmX54mm 5130 108054108 108mmX108mmX67mm 5130 108067108 108mmX108mmX76mm 5130 108076108 Reducing Tee Reducing Tee 22mmX15mmX22mm 5130 022022015 28mmX15mmX28mm 5130 028028015 28mmX22mmX28mm 5130 028028022 35mmX28mmX35mm 5130 035035028 Reducing Tee Reducing Tee 15mmX15mmX22mm 5130 015022015 22mmX22mmX28mm 5130 022028022 Straight Tap connector (With Gasket) Straight Tap Connector 15mmX1/2" 5240G015004000 15mmX3/4" 5240G015006000 22mmX3/4" 5240G022006000 Bent tap connector (with Gasket) Bent tap connector 15mmX1/2" 5002G015004000 15mmX3/4" 5002G015006000 22mmX3/4" 5002G022006000

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of ultrasonic water meters models U-WR have brass bodies and models U-WR2 have plastic bodies. The inlets incorporate a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 50⁰C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Manufacturers logo and barcode, size and technical data laser etched under digital display cover of the plastic bodied U-WR2 models and on the top of the body and display cover of the brass bodied U-WR models. Flow arrow on the plastic case of both models

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

U-WR (brass bodied) - DN15 / ¾" (M), DN20 / 1" (M). U-WR2 (plastic bodied) - DN15 / ¾" (M), DN20 / 1" (M), DN25 / 1 1/4’’ (M). Models added December 2024: U-WR2 (plastic bodied with pressure sensor) - DN15 / ¾" (M), DN20 / 1" (M), DN25 / 1 1/4’’ (M).

Approval Holder:

Viewshine Metering Ltd.

Company Name

Viewshine Metering Ltd.

Address

Building 6, Moganshan Road 1418-41 Hangzhou Zhejiang Province

Country

China

Phone

15267464630

General Email

xiongdong@viewshine.cn

View All Listings by this Company

Range of water meters with cast iron bodies (blue epoxy coating) and EPDM ‘O’ rings. Maximum working pressure 16.0 Bar Maximum operating temperature 23.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 (200mm) & DN150 (500mm)

Marking:

SENSUS on cover. Cordonel, DN, Max pressure and other technical information on meter face. Size on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

GN Q3 40 – Cordonel DN50 (200mm) GN Q3 400 – Cordonel DN150 (500mm)

Approval Holder:

Sensus UK Systems Ltd

Company Name

Sensus UK Systems Ltd

Address

North Wing Central 40, Crockford Lane, Basingstoke, RG24 8GU

Country

Basingstoke

View All Listings by this Company

Manufacturer:

Sensus GmbH Hannover

Company Name

Sensus GmbH Hannover

Address

Meineckestrasse 10 Laatzen 30880 Germany

View All Listings by this Company

Range of water meters with brass bodies and plastic turbines. The inlet incorporates a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperatures Sizes DN15-25 models: 50°C, sizes DN32-40 models: 85°C.

Section:

1505 Water Meters

Size:

See model.

Marking:

GAER and product info on dial. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

GMS DN15 GAER: ¾” BSP (M), GMS DN20 GAER: 1” BSP (M), GMS DN25 GAER: 1¼” BSP (M). GMS DN32 GAER: 1½” BSP (M), GMS DN40 GAER: 2” BSP (M).

Approval Holder:

Hidroglobal Tecnologia del Agua S.A.

Company Name

Hidroglobal Tecnologia del Agua S.A.

Address

C/ GARBÍ 3 Pol.Ind. Can Volart PARETS DEL VALLÈS

Postcode

08150

Country

Spain

Phone

+34 93 573 74 00

General Email

acalderon@regaber.com

View All Listings by this Company

Range of water meter manifolds incorporating an isolation valve, housed in a meter box. For use with PE80 pipe to BS EN 12201. Maximum working pressure 16 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

25mm Push Fit 32mm Push Fit

Marking:

W and CF31 2AX moulded on lid. Talbot moulded on push fit fittings.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

MAW7525SQ - Inline (UK) 25mm PF Single Stop Valve Meterbox SQ (525-900) MAW7532SQ - Inline (UK) 32mm PF Single Stop Valve Meterbox SQ (525-900)

Product Images

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Manufacturer:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company