Directory Search Results

Print List

#2205063

A range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The temperature is controlled independently via a single lever operating member. The spout outlet incorporates a plastic aerator. These products are supplied with an inline servicing valve integrated with a strainer and single check valve assemblies that has been verified by test for back flow prevention level 2. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2205063
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection.
Marking:
Armitage Shanks on body
Installation Requirements:
R001 R009 R010 R040
Expiry date:
31/05/2027
Model:
A7554AA Sensorflow Basin mixer panel mounted Mix Battery. A7555AA Sensorflow Basin mixer panel mounted Mix Mains.

Approval Holder:
Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Country
Staffordshire,
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Print This Approval


#2205064

A range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The temperature is controlled independently via a single lever operating member. The spout outlet incorporates a plastic aerator. These products are supplied with an inline servicing valve integrated with a strainer and single check valve assemblies that has been verified by test for back flow prevention level 2. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2205064
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut with a check valve integrated strainer, servicing valve assembly with a 15mm compression inlet
Marking:
Armitage Shanks on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2027
Model:
A7549AA Sensorflow BASIN EL SPT Rim-Mounted MIX MAINS. A7550AA Sensorflow BASIN EL SPT Rim-Mounted MIX BATTERY.

Approval Holder:
Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Country
Staffordshire,
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Print This Approval


#2112063

Single-hole, single outlet, swivel electronically controlled tap assembly with a brass body in various finishes (see model). Flow is controlled by a solenoid valve activated via an infra-red sensor and a ceramic cartridge with a single lever operating member controlling both the flow and temperature. The spout outlet incorporates a pull-out spray with a plastic aerator. The inlets incorporate approved check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 2), and a stainless-steel strainer Maximum working pressure 5 bar. Maximum working temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2112063
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection attached to check valve bodies with 1/2" BSP female inlets
Marking:
Clearwater on tap body
Installation Requirements:
R001 R009 R090
Expiry date:
31/12/2026
Model:
AML10CP, AML10BN, AML10MB & AML10BB COMBINATION TAP ASSEMBLIES

Approval Holder:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Country
United Kingdom
Phone
0168429955
General Email
2894475300@qq.com

View All Listings by this Company

Print This Approval


#2205328

Range of deck mounted sensor taps. The flow is controlled via a solenoid valve and activated by an infra-red sensor on the front of the spout. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C (models 1070021 and 1070025). Maximum operating temperature 60°C (model 1070024).

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2205328
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Frascio on body
Installation Requirements:
R001 R006 R009
Expiry date:
31/05/2027
Model:
1070021 1070024 1070025

Approval Holder:
Frascio (Guangdong) Co., Ltd
Company Name
Frascio (Guangdong) Co., Ltd
Address
288 JIN'OU ROAD #07-03 HUOJU MANSION JIANGHAI DIST JIANGMEN GUANGDONG 929040
Country
China

View All Listings by this Company
Manufacturer:
Frascio (Guangdong) Co., Ltd
Company Name
Frascio (Guangdong) Co., Ltd
Address
288 JIN'OU ROAD #07-03 HUOJU MANSION JIANGHAI DIST JIANGMEN GUANGDONG 929040
Country
China

View All Listings by this Company

Print This Approval


#2205329

Wall mounted infra-red single hole, single outlet electronically controlled combination tap assemblies with brass body (chrome plated), incorporating a solenoid valve controlling the flow. The spout outlets incorporate a plastic aerator.Stainless steel strainer on inlet Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2205329
Size:
½” BSP (M)
Marking:
Frascio on body
Installation Requirements:
R001 R040
Expiry date:
31/05/2027
Model:
1070029

Approval Holder:
Frascio (Guangdong) Co., Ltd
Company Name
Frascio (Guangdong) Co., Ltd
Address
288 JIN'OU ROAD #07-03 HUOJU MANSION JIANGHAI DIST JIANGMEN GUANGDONG 929040
Country
China

View All Listings by this Company
Manufacturer:
Frascio (Guangdong) Co., Ltd
Company Name
Frascio (Guangdong) Co., Ltd
Address
288 JIN'OU ROAD #07-03 HUOJU MANSION JIANGHAI DIST JIANGMEN GUANGDONG 929040
Country
China

View All Listings by this Company

Print This Approval


#2111381

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111381
Size:
½” BSP (M)
Marking:
Adhesive below insert within cistern: Dolphin, product date DD/MM/YY. 6L waterline within cistern
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
DB551x.M & DB551x.P x’ is replaced by a number from 0 to 9 to indicate the type of mounting or frame supplied attached to the cistern. For example, ‘0’ indicates mounting plastic mounting brackets, ‘1’ indicates a powder coated steel floor mounted frame. This has no effect on any of the parts in contact with water.

Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2106053

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2106053
Size:
1/2” BSP (M).
Marking:
Vitra, flush volume and model number inside cistern. Vitra on front of cistern
Installation Requirements:
R001 R556
Expiry date:
30/06/2026
Model:
WC CISTERNS 760-1720-01 3-6 LTR & 760-5805-01 3-6LTR

Approval Holder:
ECZACIBAŞI YAPI GEREÇLERİ SANAYİ VE TİCARET A.Ş
Company Name
ECZACIBAŞI YAPI GEREÇLERİ SANAYİ VE TİCARET A.Ş
Address
4 Eylül Mahallesi Necmi Soylu Caddesi No:5 Bilecik
Postcode
11300
Country
Turkey
General Email
meltem.topcu@vitra.com.tr

View All Listings by this Company

Print This Approval


#2206320

Range of in-line non-verifiable single check valve assemblies consisting of a spring loaded resilient trim single check valve cartridge housed within a DZR brass brass body. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
2206320
Size:
see model
Marking:
V Therm, flow arrow, size, PN16 and CR etched on body
Installation Requirements:
R001
Expiry date:
30/06/2027
Model:
vTherm STVSN0454 – ¾” BSP (M) vTherm STVSN0455 – 1” BSP (M)

Approval Holder:
Vital Energi Utilities Limited
Company Name
Vital Energi Utilities Limited
Address
Century House Roman Road Blackburn
Postcode
BB1 2LD
Country
Lancashire
Phone
01254 296000
General Email
sales@vitalenergi.co.uk

View All Listings by this Company

Print This Approval


#2206020

Range of one-piece and two-piece pre-insulated GRP cold water storage cisterns. Cisterns are supplied with a float operated inlet valve, screened overflow and screened vent. Cold water use only.

Section:
0120 Cisterns Storing Water for Domestic Purposes
Section Subtitle:
Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
2206020
Size:
45 litres – 12000 litres
Marking:
Decca Plastics Ltd, capacity and technical information on adhesive label on lid.
Installation Requirements:
R001 R270 R280
Expiry date:
30/06/2027
Model:
One piece imperial DP-45 DP-95 DP-137 DP-180 DP-225 DP-267 DP-315 DP-365 DP-453 DP-458 DP-568 DP-680 DP-909 DP-1135 DP-1364 DP-1590 DP-1818 DP-2272 DP-2726 DP-3185 DP-3636 One piece metric DP-125 DP-187 DP-250 DP-251 DP-305 DP-360 R DP-375 DP-500 DP-501 DP-540 R DP-601 DP-720 R DP-750 DP-751 DP-1000 DP-1220 DP-1400 DP-1500 DP-1501 DP-2000 DP-2250 DP-2501 DP-3000 DP-3001 DP-3750 DP-4000 DP-4500 DP-5000 DP-5625 DP-6000 DP-6001 DP-7500 DP-8000 DP-9000 DP-12000 Two piece imperial TP/DP-45 TP/DP-95 TP/DP-137 TP/DP-180 TP/DP-225 TP/DP-267 TP/DP-315 TP/DP-365 TP/DP-453 TP/DP-458 TP/DP-568 TP/DP-680 TP/DP-909 TP/DP-1135 TP/DP-1364 TP/DP-1590 TP/DP-1818 TP/DP-2272 TP/DP-2726 TP/DP-3185 TP/DP-3636 Two piece Metric TP/DP-125 TP/DP-187 TP/DP-250 TP/DP-251 TP/DP-305 TP/DP-375 TP/DP-500 TP/DP-501 TP/DP-601 TP/DP-750 TP/DP-751 TP/DP-1000 TP/DP-1220 TP/DP-1400 TP/DP-1500 TP/DP-1501 TP/DP-2000 TP/DP-2250 TP/DP-2501 TP/DP-3000 TP/DP-3001 TP/DP-3750 TP/DP-4000 TP/DP-4500 TP/DP-5000 TP/DP-5625 TP/DP-6000 TP/DP-6001 TP/DP-7500 TP/DP-8000 TP/DP-9000 TP/DP-12000

Approval Holder:
Decca Plastics UK Ltd.
Company Name
Decca Plastics UK Ltd.
Address
Victoria Mill, Lincoln Street, Preston
Postcode
PR1 6RE
Country
Lancashire
Phone
+44 (0) 1772 725 757

View All Listings by this Company

Print This Approval


#2205353

Range of sectional stainless steel storage cistern with lid. Maximum operating temperature 60°C.

Section:
0140 Cisterns
Section Subtitle:
Cold water storage and lids, metal.
WRAS Approval Number:
2205353
Size:
1000L – 100,0000L
Marking:
Liangyu (Liaoning) company logo, capacity and website on adhesive label on body
Installation Requirements:
R001
Expiry date:
31/05/2027
Model:
LYSSWT-01

Approval Holder:
Liangyu (Liaoning) International Trade Co., Ltd
Company Name
Liangyu (Liaoning) International Trade Co., Ltd
Address
Gate 2, No. 400-34, Zhihui Second Street, Hunnan District, Shenyang City, Liaoning Province

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 158 of 885

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.