Directory Search Results

Print List

#2104314

Range of free standing direct gas fired unvented cyliners with a enamel coating internal lining and magnesium sacrificial anode. Fitted with a combined temperature and pressure relief valve set at 7 bar. Maximum working pressure 6.5 bar. Maximum operating temperature 80°C.

Section:
1890 Unvented Heating Apparatus
Size:
1” BSP(M) x 1”BSP(M)
Marking:
Therm’inova, serial no, gas type, capacity and other techcnial information on body.
Installation Requirements:
R001 R140
Expiry date:
30/04/2026
Model:
COE / NHREC 18 kW (G20/G25/G31) COE / NHREC 36 kW (G20/G25/G31) COE / NHREC 60 kW (G20/G25/G31) AEALN / NHREX 18 kW (G20/G25/G31) AEALN / NHREX 26 kW (G20/G25/G31) AEALN / NHREX 36 kW (G20/G25/G31) AEALN / NHREX 60 kW (G20/G25/G31) The AEALN / NHREX family of product has straight exhaust that goes from the burner through the tank up to the top of the water heater The COE family of product has a corkscrew exhaust that goes through the tank and exit at the base of the water heater Each water heater through specific setting can be used with 3 different type of gas: - G 20 = Methane - G 25 = Town Gas - G31 = Propane (LPG)
Product Images

Approval Holder:
Therm'inova
Company Name
Therm'inova
Address
1 Rue Des Bornes 27140 Gisors
Country
France
Phone
+33 (0)2 32 27 85 08
General Email
be@therm-inova.com

View All Listings by this Company
Manufacturer:
Therm'inova
Company Name
Therm'inova
Address
1 Rue Des Bornes 27140 Gisors
Country
France
Phone
+33 (0)2 32 27 85 08
General Email
be@therm-inova.com

View All Listings by this Company

Print This Approval


#2104319

Automatic air venting valve with brass bodies, stainless steel float and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 120°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2104319
Note:
For closed circuit use only.
Size:
¾” BSP (F)
Marking:
Caleffi, Art 501, pressure and temperature on body
Installation Requirements:
R001 R200
Expiry date:
30/04/2026
Model:
Series 501 Automatic Air Vent
Product Images

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#2104018

Range of air venting valves incorporating an epoxy coated, iron body and a drain point. Maximum working pressure 16.0 bar. Maximum operating temperature 60˚C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2104018
Note:
Fittings in this section are suitable for above ground installations only.
Size:
See model.
Marking:
TT Flow Valves (division of TT Pumps Ltd.), DN, PN, model and year of manufacture (YYYY) on data plate. Size and year of manufacture (YYYY) on body.
Installation Requirements:
R001
Expiry date:
30/04/2026
Model:
Aquabrake(R) range of air valves: Double orifice Aquabrake(R) 3F 1” & 2” BSP female inlet. Aquabrake(R) 3F DN50 - DN200. Double orifice with anti-surge Aquabrake(R) 3F AS 1” & 2” BSP female inlet Aquabrake(R) 3F AS DN50 - DN200. Double orifice with rapid fill protection Aquabrake(R) 3F RFP 1 & 2” BSP female inlet Aquabrake(R) 3F RFP DN50 - DN200.

Approval Holder:
T-T Pumps Limited
Company Name
T-T Pumps Limited
Address
Newcastle Road, Woore, Cheshire.
Postcode
CW3 9RU.
Phone
(01630) 647 200

View All Listings by this Company
Manufacturer:
T-T Pumps Limited
Company Name
T-T Pumps Limited
Address
Newcastle Road, Woore, Cheshire.
Postcode
CW3 9RU.
Phone
(01630) 647 200

View All Listings by this Company

Print This Approval


#2104031

Range of air venting valves with a blue epoxy coated ductile iron body and carbon steel cover, NBR ‘O’-rings and EPDM seals. Maximum working pressure 10.0 bar or 16.0 bar (see model). Maximum operating temperature 65°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2104031
Note:
Fittings in this section are suitable for above ground installations only.
Size:
DN50 to DN300 flanged inlet/outlet
Marking:
OZ-KAN, PN, DN and EN on body. OZ-KAN, DN, PN and date of manufacture (YYYY) on data plate on body.
Installation Requirements:
R001
Expiry date:
30/04/2026
Model:
10.0 bar models: DDV01501A1101SST (DN 150). DDV02001A1101SST (DN 200). DDV02501A1101SST (DN 250). DDV03001A1101SST (DN 300). 16.0 bar models: DDV00502A1201SST (DN 0050). DDV00652A1201SST (DN 0065). DDV00802A1201SST (DN 0080). DDV01002A1201SST (DN 0100). DDV01252A1201SST (DN 0125). DDV01502A1201SST (DN 0150). DDV02002A1201SST (DN 0200). DDV02502A1201SST (DN 0250). DDV03002A1201SST (DN 0300).

Approval Holder:
Özkan Makina Elemanları San. Ve Tic. A.Ş.
Company Name
Özkan Makina Elemanları San. Ve Tic. A.Ş.
Address
10032 Sokak, No:27 Atatürk O.S.B. Çiğli İzmir
Postcode
35620
Country
Turkey
General Email
btuzun@oz-kan.com.tr

View All Listings by this Company
Manufacturer:
Özkan Makina Elemanları San. Ve Tic. A.Ş.
Company Name
Özkan Makina Elemanları San. Ve Tic. A.Ş.
Address
10032 Sokak, No:27 Atatürk O.S.B. Çiğli İzmir
Postcode
35620
Country
Turkey
General Email
btuzun@oz-kan.com.tr

View All Listings by this Company

Print This Approval


#2104061

Range of air venting valves incorporating an epoxy coated, iron body and a drain point. Maximum working pressure 16.0 bar. Maximum operating temperature 60˚C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2104061
Note:
Fittings in this section are suitable for above ground installations only.
Size:
See model.
Marking:
CSA FOX & SIZE ON BODY CSA & FOX ON DATA PLATE
Installation Requirements:
R001
Expiry date:
30/04/2026
Model:
Double orifice FOX & LYNX 1” & 2” BSP female inlet. DN50 - DN200. Double orifice with anti-surge FOX AS & LYNX AS 1” & 2” BSP female inlet DN50 - DN200. Double orifice with rapid fill protection FOX RPF & LYNX RFP 1 & 2” BSP female inlet DN50 - DN200.
Product Images

Approval Holder:
CSA S.r.l
Company Name
CSA S.r.l
Address
Strada San Giuseppe 15 Localita Ponteghiara - 43039 Salsomaggiore Terme (PR)
Country
Italy
Phone
+390524523978
General Email
peter@ttflow.com

View All Listings by this Company

Print This Approval


#2104324

Wall mounted, manually operated blending valve, (brass body with a chromium plated brass trim set), incorporating a ceramic cartridge headwork with a single lever operating member controlling temperature and flow, and a manual diverter controlling the flow to the shower hose and handset or a secondary shower outlet. The product is supplied with a shower hose and handset. The handshower outlet connection and the shower handset inlet both incorporate an approved check valve cartridge, however the complete assembly has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2104324
Note:
This approval does not include an overhead shower outlet.
Size:
½” BSP (F) x ½” BSP (F)
Marking:
Gessi logo on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2026
Model:
Art. 38439+44831 (38439: built in part – 44831: external part)
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#2107703

Wall mounted, manually operated, concealed blending valve with a brass body incorporating a ceramic cartridge headwork with a single lever operating member controlling both flow and temperature. Maximum working pressure 5.0 bar. Maximum operating temperature 90°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2107703
Note:
This approval does not include a shower hose, shower handset or spout outlet.
Size:
½” BSP (F)
Marking:
Vola on operating member. Vola on body.
Installation Requirements:
R001 R010 R040
Expiry date:
30/07/2026
Model:
VOLA 2200V

Approval Holder:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company
Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

Print This Approval


#2109701

Wall mounted manually operated, concealed blending valve (brass body) incorporating a ceramic cartridge headwork controlling both flow and temperature with single lever operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2109701
Note:
This approval does not include a shower hose and handset.
Size:
½” BSP (F)
Marking:
Vola on valve body
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2026
Model:
VOLA 100X. VOLA 200V.

Approval Holder:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company
Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

Print This Approval


#2105047

Concealed, wall mounted, manual shower blending valve incorporating a brass body, ceramic cartridge headwork and a self-cancelling diverter to a second shower outlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2105047
Note:
This approval does not include a shower hose and handset. Not supplied with any operating members.
Size:
½” BSP (F) inlet and outlet
Marking:
THG on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/05/2026
Model:
6550A/W
Product Images

Approval Holder:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80
General Email
cvallee@thg.fr

View All Listings by this Company
Manufacturer:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80
General Email
cvallee@thg.fr

View All Listings by this Company

Print This Approval


#2104316

Range of wall mounted thermostatic bar type mixing valves incorporating chrome plated brass bodies, ceramic disc headwork with dome type operating members controlling the flow. The temperature is independently controlled by a thermostatic cartridge with dome type operating member which incorporates a manual override button.The inlets incorporate stainless-steel strainers and an approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Product is supplied with a shower hose, shower handset and riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2104316
Size:
¾" BSP captive nut inlets x ½" BSP (M) offset union.
Marking:
DTC37 (brand of Methven) and DEVA on body. Deva logo on handset.
Installation Requirements:
R001
Expiry date:
30/04/2026
Model:
KESCTS NIACTS
Product Images

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 158 of 1122

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.