A range of four-hole single outlet fixed combination tap assemblies with brass bodies in a variety of finishes (See models). Incorporating ¼ ceramic disc headworks with single lever operating members and a self-cancelling diverter to a shower outlet. The spout outlet incorporates a plastic aerator. The shower outlet elbow incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. This product is supplied with a shower hose, shower handset and metal screw clamp type back nuts. The side valves and the spout are connected with a copper tube. Maximum working pressure 10 bar. Maximum working temperature 60 °C.

Section:

0680 Combination Tap Assemblies

Section Subtitle:

Multi hole tap(s) with a single outlet and a swivel spout , incorporating a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3).

WRAS Approval Number:

2112042

Size:

For use with basic set 13244180 which has ½” BSP (M) inlets

Marking:

HANSGROHE on Spout

Installation Requirements:

R001 R006 R030

Expiry date:

31/12/2026

Model:

HG Vernis Blend 4 hole bath mixer chrome models: 71 456 xxx 71 459 xxx Has to be installed with basic set 13 244 180 (HG 4 hole bath mixer basic set) Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of wall elbows incorporating brass bodies (various finishes) and various back plates. Maximum operating temperature 95ºC.

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

2112004

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

SHS on body.

Installation Requirements:

R001 R040

Expiry date:

31/12/2026

Model:

V264-W-XX Fairfield Elbow V664-W-XX Style Moderne Elbow V764-W-XX Landmark Elbow T164-W-XX 100 Collection Elbow “XX” denotes choice of finish available and can be replaced with any of the following: CP = Chrome Plate PN = Polished Nickel SSF = Stainless Steel Finish NL = Non-Lacquered BG = Brushed Gold BGG = Brushed Gold Gloss lacquered BGM = Brushed Gold Matt Lacquered CTB = City Bronze CNB = Country Bronze AG = Antique Gold MOP = Matt Finish MBC = Matt Black Chrome SSB = Stainless steel finish URB = Urban Brass URM = Urban Brass Matt

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Carbon block filter cartridge with plastic body. The cartridge may be installed with a manifold (filter head) for use with PE tubing manufactured to BS 1972. Maximum working pressure 8.6 bar. Cold water use only

Section:

1055 Filter Cartridges

Size:

Filter: 11mm spigot. Manifold: ¼” pushfit.

Marking:

Good home (Tradename of Kingfisher), model and technical info on label on body (Filter) Kingfisher on body (Manifold) model and technical information on label on body

Installation Requirements:

R001 R120 R150 R170 R290

Expiry date:

30/11/2026

Model:

FC01 FILTER CARTRIDGES & SINGLE STAGE MANIFOLD

Product Images

Approval Holder:

Kingfisher PLC

Company Name

Kingfisher PLC

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

‘Comisa’ range of brass bodied press-fit and threaded fittings for use with `Comisa’ (PE-RT/AL/PE-LMD) multi-layer pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2111309

Size:

See model

Marking:

Fittings: Comisa logo, DVGW, size, made in Italy on body. Pipe: Comisa, size, pressure, date of manufacture (DD.MM.YY) (HH.MM) and other technical information on body. Date Code: 111=first four months 11=second four months 1=last four months J=2020 K=2021

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

Press fittings: Straight coupler: 87.10.160: MU0870000160 16 x 2, 87.10.200: MU0870000200 20 x 2, 87.10.260: MU0870000260 26 x 3. Reducing coupling double: 87.11.201: MU0870R20160 20 x 2 - 16 x 2, 87.11.260: MU0870R26160 26 x 3 - 16 x 2, 87.11.263: MU0870R26200 26 x 3 - 20 x 2. Male Coupling: 87.12.150: MU0871003160 16 x 2 - ⅜”, 87.12.160 : MU0871005160 16 x 2 - ½”, 87.12.164: MU0871007160 16 x 2 - ¾”, 87.12.200: MU0871005200 20 x 2 - ½”, 87.12.201: MU0871007200 20 x 2 - ¾”, 87.12.255: MU0871005260 26 x 3 - ½”, 87.12.260: MU0871007260 26 x 3 - ¾”, 87.12.261: MU0871010260 26 x 3 - 1”. Female Coupling: 87.13.160 : MU0880005160 16 x 2 - ½”, 87.13.164: MU0880007160 16 x 2 - ¾”, 87.13.200: MU0880005200 20 x 2 - ½”, 87.13.201: MU0880007200 20 x 2 - ¾”, 87.13.255: MU0880005260 26 x 3 - ½”, 87.13.260: MU0880007260 26 x 3 - ¾”, 87.13.261: MU0880010260 26 x 3 - 1”. Elbow 90°: 87.14.160: MU0860000160 16 x 2, 87.14.200: MU0860000200 20 x 2, 87.14.260: MU0860000260 26 x 3. Male Elbow 90°: 87.16.160: MU0861005160 16 x 2 - ½”, 87.16.164: MU0861007160 16 x 2 - ¾”, : MU0861003160 16 x ⅜”, 87.16.200: MU0861005200 20 x 2 - ½”, 87.16.201: MU0861007200 20 x 2 - ¾”, 87.16.260: MU0861007260 26 x 3 - ¾”, 87.16.265: MU0861010260 26 x 3 - 1”. Female Elbow 90°: 87.17.159: MU08620H5160 - 16 x 2 - ½” 87.17.160: MU0862005160 - 16 x 2 - ½” 87.17.164: MU0862007160 - 16 x 2 - ¾” 87.17.200: MU0862005200 - 20 x 2 - ½” 87.17.201: MU0862007200 - 20 x 2 - ¾” 87.17.260: MU0862007260 - 26 x 3 - ¾” 87.17.265: MU0862010260 - 26 x 3 - 1” Tee: 87.18.160: MU0850000160 - 16 x 2 87.18.200: MU0850000200 - 20 x 2 87.18.260: MU0850000260 - 26 x 3 Tee reduced middle section: 87.19.201: MU085300BAB0 - 20 x 2 - 16 x 2 - 20 x 2 87.19.261: MU085300DAD0 - 26 x 3 - 16 x 2 - 26 x 3 87.19.263: MU085300DBD0 - 26 x 3 - 20 x 2 - 26 x 3 Reducing Tee: 87.20.202: MU085300BAA0 - 20 x 2 - 16 x 2 - 16 x 2 87.20.206: MU085300BBA0 - 20 x 2 - 20 x 2 - 16 x 2 87.20.260: MU085300DAB0 - 26 x 3 - 16 x 2 - 20 x 2 87.20.264: MU085300DBA0 - 26 x 3 - 20 x 2 - 16 x 2 87.20.265: MU085300DBB0 - 26 x 3 - 20 x 2 - 20 x 2 87.20.269: MU085300DDA0 - 26 x 3 - 26 x 3 - 16 x 2 87.20.270: MU085300DDB0 - 26 x 3 - 26 x 3 - 20 x 2 Tee enlarged middle section: 87.21.161: MU085300ABA0 - 16 x 2 - 20 x 2 - 16 x 2 87.21.201: MU085300BDB0 - 20 x 2 - 26 x 3 - 20 x 2 87.21.260: MU085300DED0 - 26 x 3 - 32 x 3 - 26 x 3 Male Tee: 87.22.160: MU0851005160 - 16 x 2 - ½” - 16 x 2 87.22.200: MU0851005200 - 20 x 2 - ½” - 20 x 2 87.22.201: MU0851007200 - 20 x 2 - ¾” - 20 x 2 87.22.260: MU0851005260 - 26 x 3 - ½” - 26 x 3 87.22.261: MU0851007260 - 26 x 3 - ¾” - 26 x 3 87.22.262: MU0851010260 - 26 x 3 - 1” - 26 x 3 Female Tee: 87.23.160: MU0852005160 - 16 x 2 - ½” - 16 x 2 87.23.200: MU0852005200 - 20 x 2 - ½” - 20 x 2 87.23.201: MU0852007200 - 20 x 2 - ¾” - 20 x 2 87.23.260: MU0852005260 - 26 x 3 - ½” - 26 x 3 87.23.261: MU0852526200 - 26 x 3 - ½” - 20 x 2 87.23.263: MU0852007260 - 26 x 3 - ¾” - 26 x 3 Wallplate elbow-short 90°: 87.24.145: MU0863003160 - 16 x 2 - ⅜” h. 39mm 87.24.160: MU0863005160 - 16 x 2 - ½” h. 39mm 87.24.161: MU08630H5160 - 16 x 2 - ½” h. 52mm 87.24.200: MU0863005200 - 20 x 2 - ½” h. 52mm 87.24.201: MU0863007200 - 20 x 2 - ¾” h. 52 mm 87.24.260: MU0863007260 - 26 x 3 - ¾” h. 52mm Wallplate elbow-double short 90°: 87.25.160: MU0864005160 - 16 x 2 - ½” - 16 x 2 h. 52mm 87.25.200: MU0864005200 - 20 x 2 - ½” - 20 x 2 h. 52mm Wallplate elbow-long 90°: 87.26.160: MU0863L05160 - 16 x 2 ½” h. 78mm 87.26.200: MU0863L05200 - 20 x 2 ½” h. 78mm Wallplate elbow for series connections: 87.26.205: MU0865005160 - 16 x 2 - ½” F - 16 x 2 - h 52 mm 87.26.210: MU0865005200 - 20 x 2 - ½” F - 20 x 2 - h 52 mm Wallplate elbow U-shaped 180°: 87.27.216: MU0884005160 - 16 x 2 - ½” 87.27.220: MU0884005200 - 20 x 2 - ½” Wallplate elbow U-shaped: 87.27.160: MU0887005160 - 16 x 2 - ½” - 16 x 2 87.27.200: MU0887005200 - 20 x 2 - ½” - 20 x 2 Cistern connector ¾” M x ½” F: 87.33.105: MU0867005160 - 16 x 2 - h 78 mm 87.33.115: MU0867005200 - 20 x 2 - h 78 mm WC Cistern Elbow: 87.28.160: MU0856005160 - 16 x 2 - ½” 87.28.200: MU0856005200 - 20 x 2 - ½” WC Cistern T-Piece: 87.29.160: MU0857005160 - 16 x 2 - ½” - 16 x 2 87.29.200: MU0857005200 - 20 x 2 - ½” - 20 x 2 Elbow 45°: 87.30.260: MU0866000260 - 26 x 3 Elbow 45°, Stop end: 87.31.160: MU0881000160 - 16 x 2 87.31.200: MU0881000200 - 20 x 2 87.31.260: MU0881000260 - 26 x 3 Male angle screw connector 90°: 87.34.160: MU0868005160 - 16 x 2 87.34.200: MU0868005200 - 20 x 2 - ½” 87.34.201: MU0868007200 - 20 x 2 - ¾” Female angle screw connector 90°: 87.35.160: MU0869005160 - 16 x 2 - ½” 87.35.200: MU0869005200 - 20 x 2 - ½” 87.35.201: MU0869007200 - 20 x 2 - ¾” Female screw fitting, flat seal: 87.36.160: MU0883005160 - 16 x 2 - ½” 87.36.161: MU0883007160 - 16 x 2 - ¾” 87.36.200: MU0883005200 - 20 x 2 - ½” 87.36.201: MU0883007200 - 20 x 2 - ¾” 87.36.260: MU0883007260 - 26 x 3 - ¾” 87.36.261: MU0883010260 - 26 x 3 - 1” Male screw fitting, tapered: 87.37.160: MU0873005160 - 16 x 2 - ½” 87.37.161: MU0873007160 - 16 x 2 - ¾” 87.37.200: MU0873005200 - 20 x 2 - ½” 87.37.201: MU0873007200 - 20 x 2 - ¾” 87.37.260: MU0873007260 - 26 x 3 - ¾” 87.37.261: MU0873010260 - 26 x 3 - 1” Connecting screw fitting with Euro cone raw: 87.39.160: MU087500716L 16 x 2 - ¾” 87.39.200: MU087500720L 20 x 2 - ¾” 87.39.260: MU087501026L 26 x 3 - 1” Screw connector, flat seal: 87.42.140: MU087600316L 16 x 2 - ⅜” 87.42.150: MU087600516L 16 x 2 - ½” 87.42.160: MU087600716L 16 x 2 - ¾” 87.42.170: MU087600520L 20 x 2 - ½” 87.42.200: MU087600720L 20 x 2 - ¾” 87.42.260: MU087601026L 26 x 3 - 1” : MU087600726L 26 x ¾" Tee By-pass: 87.49.010: MU0888000160 - 16 x 16 x 16 87.49.015: MU088800BAA0 - 20 x 16 x 16 87.49.020: MU088800BAB0 - 20 x 16 x 20 87.49.025: MU0888000200 - 20 x 20 x 20 NP Nipples press + insert: 87.47.055: MU0886016120 - 16x2 - 12 mm Nipples press + insert: 87.47.060: MU0886016150 - 16 x 2 - 15 mm 87.47.070: MU0886020220 - 20 x 2 - 22 mm Elbow press x compression: 87.47.110: MU0858016100 - 16 x 2 -10 mm 87.47.115: MU0858016150 - 16 x 2 -15 mm Quick press connection (2 pieces): 87.50.100 VA0844000160 - 16 x 2 87.50.105 VA0844000200 - 20 x 2 Disaligned tee fittings, on mounting plate, for Multiple conn: 87.54.034: MU0830005160 - 16 x 2 - ½” F - 16 x 2 87.54.035: MU0830005200 - 20 x 2 - ½” F - 20 x 2 Disaligned end fittings, on mounting plate: 87.54.039: MU0831005160 - 16 x 2 - ½” F - 16 x 2 87.54.040: MU0831005200 - 20 x 2 - ½” F - 20 x 2 disaligned fittings: 87.54.032: MU0891005160 - 16 x 2 - ½” F 16 x 2 87.54.033: MU0891005200 - 20 x 2 - ½” F 20 x 2 Wallplate elbow assembled in set: 87.54.005: MU0832005160 - 16 x 2 - ½” 87.54.019: MU0832005200 - 20 x 2 - ½” 87.54.020: MU0832007200 - 20 x 2 - ¾” Wallplate elbow 16 x 2 - ½” h. 52 mm with soundproof elements assembled in set: 87.54.030: MU0833005160 - 16 x 2 ½” Sanitary mounting plate assembled with 2 wallplate elbows, distance 76 mm: 87.54.060: MU0834005160 ½” - 16 x 2 87.54.061: MU0834005200 ½” - 20 x 2 Sanitary mounting plate assembled with 2 wallplate elbows, distance152 mm: 87.54.065: MU0835005160 ½” - 16 x 2 87.54.066: MU0835005200 ½” - 20 x 2 Press elbow swivel nut ½x16: MU0892005160 - 16x½" Press elbow swivel nut ¾x16: MU0892007160 - 16x¾" Press elbow swivel nut ¾x20: MU0892007200 - 20x¾" Press elbow swivel nut ¾x26: MU0892007260 - 26x¾" kit plaster fittings 90 ° - ½ "female 16x2,0 comisa press: MU08590KT010 ½" female 16x2 MU08590KT020 ½"female 20x2 Threaded fittings: Straight coupling: 88.03.415: RM057000016N - 16 x 2 88.03.420: RM057000X16N - 16 x 2 88.03.435: RM057000020N - 20 x 2 Straight reduction: 88.03.855: RM0570R2016N - 20 x 2 - 16 x 2 Male straight coupling ISO 7/2: 88.03.515: RM057100516N - 16 x 2 - ½” 88.03.520: RM05710X516N - 16 x 2 - ½” 88.03.535: RM057100520N - 20 x 2 - ½” 88.03.540: RM057100716N - 16 x 2 - ¾” 88.03.555: RM057100720N - 20 x 2 - ¾” Male straight coupling with O-Ring seal: 88.03.610: RM057200516N - 16 x 2 - ½” 88.03.620: RM05720X516N - 16 x 2 - ½” 88.03.635: RM057200520N - 20 x 2 - ½” Female straight coupling: 88.03.710: RM058000516N - 16 x 2 - ½” 88.03.715: RM05800X516N - 16 x 2 - ½” 88.03.730: RM058000520N - 20 x 2 - ½” 88.03.735: RM058000716N - 16 x 2 - ¾” 88.03.750: RM058000720N - 20 x 2 - ¾” Pressure test plugs: 87.31.605: RM058100016N - 16 x 2 87.31.615: RM058100020N - 20 x 2 Elbow 90°: 88.04.015: RM056000016N - 16 x 2 88.04.020: RM056000X16N - 16 x 2 88.04.035: RM056000020N - 20 x 2 Male elbow 90°: 88.04.115: RM056100516N - 16 x 2 - ½” 88.04.120: RM05610X516N - 16 x 2 - ½” 88.04.135: RM056100520N - 20 x 2 - ½” 88.04.140: RM056100716N - 16 x 2 - ¾” 88.04.155: RM056100720N - 20 x 2 - ¾” Female elbow 90°: 88.04.215: RM056200516N - 16 x 2 - ½” 88.04.220: RM05620X516N - 16 x 2 - ½” 88.04.235: RM056200520N - 20 x 2 - ½” 88.04.240: RM056200716N - 16 x 2 - ¾” 88.04.255: RM056200720N - 20 x 2 - ¾” Elbow with wallplate 90°: 88.04.315: RM056300516N - 16 x 2 - ½” 88.04.320: RM05630X516N - 16 x 2 - ½” 88.04.335: RM056300520N - 20 x 2 - ½” 88.04.350: RM056300716N - 16 x 2 - ¾” 88.04.365: RM056300720N - 20 x 2 - ¾” Tee: 88.04.515: RM055000016N - 16 x 16 x 16 88.04.520: RM055000X16N - 16 x 16 x 16 88.04.535: RM055000020N - 20 x 20 x 20 Reducing Tee: 88.04.558: RM055300BAAN - 20 x 2 - 16 x 2 - 16 x 2 88.04.560: RM055300BABN - 20 x 2 - 16 x 2 - 20 x 2 88.04.566: RM055300BBAN - 20 x 2 - 20 x 2 - 16 x 2 Male Tee: 88.04.715: RM055100516N - 16 x ½” x 16 88.04.720: RM055100716N - 16 x ¾” x 16 88.04.735: RM055100720N - 20 x ¾” x 20 Female Tee: 88.04.615: RM055200516N - 16 x ½” x 16 88.04.620: RM05520X516N - 16 x ½” x 16 88.04.635: RM055200520N - 20 x ½” x 20 88.04.640: RM055200716N - 16 x ¾” x 16 88.04.655: RM055200720N - 20 x ¾” x 20 Nipples press x compression: 87.47.020: MU0877016150 - 16 x 2 - 15 mm 87.47.030: MU0877020220 - 20 x 2 - 22 mm 87.47.035: MU0877026220 - 26 x 3 - 22 mm 87.47.040: MU0877026280 - 26 x 3 - 28 mm 87.47.080: MU0886I20220 - 20 x 2 - 22 mm Ireland 87.47.081: MU0886I26220 - 26 x 3 - 22 mm Ireland : MU0886026220 - 26 x 3 - 22 mm

Product Images

Approval Holder:

Comisa S.p.A

Company Name

Comisa S.p.A

Address

Via Neziole,27 Pisogne (BS)

Postcode

25055

Country

Italy

Phone

+39 0364 896861

General Email

info@comisa.it

View All Listings by this Company

Manufacturer:

Comisa S.p.A

Company Name

Comisa S.p.A

Address

Via Neziole,27 Pisogne (BS)

Postcode

25055

Country

Italy

Phone

+39 0364 896861

General Email

info@comisa.it

View All Listings by this Company

ERA-01 range of SDR11 and SDR17 polyethylene butt welded fittings for use with ERA-02 range of SDR11 and SDR17 PE 100 pipe. SDR11 rated pipe and fittings have a maximum working pressure of 16.0 bar. SDR17 rated pipe and fittings have a maximum working pressure of 10.0 bar. For above and below ground use. Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112025

Size:

SDR11 pipe and fittings = DN75 – DN315. SDR17 pipe and fittings = DN160 – DN315.

Marking:

‘ERA®’ and technical information on pipe and fitting.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

ERA-01 range of fittings (90° elbow, 45° elbow, flange, cross, straight tee, reducing cross, reducing tee, end cap and reducing socket) for use with ERA-02 pipe.

Product Images

Approval Holder:

ERA Piping (Zhejiang) Co.,Ltd.

Company Name

ERA Piping (Zhejiang) Co.,Ltd.

Address

No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

ERA Piping (Zhejiang) Co.,Ltd.

Company Name

ERA Piping (Zhejiang) Co.,Ltd.

Address

No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang

Country

China

View All Listings by this Company

Range of copper press fittings with EPDM seals for use with EN1057 copper tube. The joints are achieved by means of a press tool. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112303

Size:

see models

Marking:

Company logo (HS) and size on body

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

6002(Press 90° Bend C×C) 12,15,22,28,35,42,54mm 6001(Press 90° Bend FTG×C) 12,15,22,28,35,42,54mm 6041(Press 45° Bend C×C) 12,15,22,28,35,42,54mm 6040(Press 45° Bend FTG×C) 12,15,22,28,35,42,54mm 6130(Press Tee C×C×C) 12,15,22,28,35,42,54mm 6301(Press Cap) 12,15,22,28,35,42,54mm 6270(Press CouplingC×C) 12,15,22,28,35,42,54mm 6130R(Press ReducingTee C×C×C) 15×15×12, 22×22×15, 22×22×12, 22×15×15, 22×15×22, 28×28×22, 28×28×15, 28×15×22, 28×22×22, 28×15×28, 28×22×28, 35×35×28, 35×35×22,35×35×15, 42×42×35, 42×42×28, 42×42×22, 42×42×15, 54×54×42, 54×54×35, 54×54×28, 54×54×22 6240 (Press Reducing Coupling C×C) 15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28, 42×22, 54×42, 54×35; 6243 (Press Fitting Reducer Ftg×C) 15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28, 42×22, 54×42, 54×35, 54×28, 54×22

Approval Holder:

Ningbo Hengsheng Pipe Fitting Co Ltd

Company Name

Ningbo Hengsheng Pipe Fitting Co Ltd

Address

No. 28 West Jinshui Road, Ninghai, Zhejiang

Country

China

Phone

0086-574-65338995

General Email

sales@hengshen.com

View All Listings by this Company

Boss Range of brass, chrome plated brass or DZR brass compression fittings for use with copper pipe only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

2110381

Size:

6mm -54mm

Marking:

BOSS, CR and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

62240002 .5 BSPP MXF TAP EXTENSION DZR 62240013 15MM COMPRESSION NUT DZR BOSS 62240024 22MM COMPRESSION NUT DZR BOSS 62240035 28MM COMPRESSION NUT DZR BOSS 62240046 35MM COMPRESSION NUT DZR BOSS 62240057 42MM COMPRESSION NUT DZR BOSS 62240068 54MM COMPRESSION NUT DZR BOSS 62240079 15MM BLANK COMPRESSION NUT DZR 62240090 22MM BLANK COMPRESSION NUT DZR 62240109 28MM BLANK COMPRESSION NUT DZR 62240120 15MM BRASS COMPRESSION RING 62240131 22MM BRASS COMPRESSION RING 62240142 28MM BRASS COMPRESSION RING 62240153 35MM BRASS COMPRESSION RING 62240164 42MM BRASS COMPRESSION RING 62240175 54MM BRASS COMPRESSION RING 62240186 .75 IMPERIAL BRASS RING BOSS 62240197 1.25 IMPERIAL BRASS RING BOSS 62240205 15X8MM 3 PIECE REDUCER DZR 62240216 15X10MM 3 PIECE REDUCER DZR 62240227 15X12MM 3 PIECE REDUCER DZR 62240238 22X15MM 3 PIECE REDUCER DZR 62240249 28X15MM 3 PIECE REDUCER DZR 62240260 28X22MM 3 PIECE REDUCER DZR 62240271 35X15MM 3 PIECE REDUCER DZR 62240282 35X22MM 3 PIECE REDUCER DZR 62240293 35X28MM 3 PIECE REDUCER DZR 62240301 42X15MM 3 PIECE REDUCER DZR 62240312 42X22MM 3 PIECE REDUCER DZR 62240323 42X28MM 3 PIECE REDUCER DZR 62240334 42X35MM 3 PIECE REDUCER DZR 62240345 54X15MM 3 PIECE REDUCER DZR 62240356 54X22MM 3 PIECE REDUCER DZR 62240367 54X28MM 3 PIECE REDUCER DZR 62240378 54X35MM 3 PIECE REDUCER DZR 62240389 54X42MM 3 PIECE REDUCER DZR 62240408 8MM STRAIGHT COUPLER DZR BOSS 62240419 10MM STRAIGHT COUPLER DZR BOSS 62240430 15MM STRAIGHT COUPLER DZR BOSS 62240441 22MM STRAIGHT COUPLER DZR BOSS 62240452 28MM STRAIGHT COUPLER DZR BOSS 62240463 35MM STRAIGHT COUPLER DZR BOSS 62240474 42MM STRAIGHT COUPLER DZR BOSS 62240485 54MM STRAIGHT COUPLER DZR BOSS 62240496 15X8MM STRAIGHT COUPLER DZR 62240504 15X10MM STRAIGHT COUPLER DZR 62240515 15X12MM STRAIGHT COUPLER DZR 62240526 22X15MM STRAIGHT COUPLER DZR 62240537 28X22MM STRAIGHT COUPLER DZR 62240548 22X22X100MM REPAIR CONNECTOR 62240570 8X.25 BSPP MALE IRON COUPLER 62240581 8X.5 BSPP MALE IRON COUPLER 62240592 10X.25 BSPPMALE IRON COUPLER 62240600 10X.375 BSPP MALE IRON COUPLER 62240611 10X.5 BSPP MALE IRON COUPLER 62240622 15X.25 BSPP MALE IRON COUPLER 62240633 15X.375 BSPP MALE IRON COUPLER 62240644 15X.5 BSPP MALE IRON COUPLER 62240655 15X.75 BSPP MALE IRON COUPLER 62240666 22X.5 BSPP MALE IRON COUPLER 62240677 22X.75 BSPP MALE IRON COUPLER 62240688 22X1 BSPP MALE IRON COUPLER 62240699 28X.75 BSPP MALE IRON COUPLER 62240707 28X1 BSPP MALE IRON COUPLER 62240718 28X1.25 BSPP MALE IRON COUPLER 62240729 35X1 BSPP MALE IRON COUPLER 62240740 35X1.25 BSPP MALE IRON COUPLER 62240751 42X1.5 BSPP MALE IRON COUPLER 62240773 54X2 BSPP MALE IRON COUPLER 62240784 15 EXT BSPP MALE C/W BACKNUT 62240795 22 EXT BSPP MALE C/W BACKNUT 62240803 28 EXT BSPP MALE C/W BACKNUT 62240814 35 EXT BSPP MALE C/W BACKNUT 62240825 42 EXT BSPP MALE C/W BACKNUT 62240836 54 EXT BSPP MALE C/W BACKNUT 62240847 10X.375 BSPP STR FI COUPLING 62240858 15X.375 BSPP STR FI COUPLING 62240869 15X.5 BSPP STR FI COUPLING DZR 62240880 15X.75 BSPP STR FI COUPLING 62240891 22X.5 BSPP STR FI COUPLING DZR 62240910 22X.75 BSPP STR FI COUPLING 62240921 22X1 BSPP STRAIGHT FI COUPLING 62240932 28X.75 BSPP STR FI COUPLING 62240943 28X1 BSPP STRAIGHT FI COUPLING 62240954 28X1.25 BSPP STR FI COUPLING 62240965 35X1.25 BSPP STR FI COUPLING 62240976 42X1.5 BSPP STR FI COUPLING 62240987 54X2 BSPP STRAIGHT FI COUPLING 62240998 15X.5 STRAIGHT SWIVEL TAP 62241004 22X.75 STRAIGHT SWIVEL TAP 62241015 15X.5 SHORT FEMALE TAP ADAPTOR 62241026 15X.75 SHORT FEMALE TAP 62241037 22X.75 SHORT FEMALE TAP 62241048 15MM FLANGED TANK CONNECTOR 62241059 22MM FLANGED TANK CONNECTOR 62241070 28MM FLANGED TANK CONNECTOR 62241081 35MM FLANGED TANK CONNECTOR 62241092 42MM FLANGED TANK CONNECTOR 62241100 54MM FLANGED TANK CONNECTOR 62241111 15MM STOP END DZR BOSS 62241122 22MM STOP END DZR BOSS 62241133 28MM STOP END DZR BOSS 62241144 35MM STOP END DZR BOSS 62241155 42MM STOP END DZR BOSS 62241166 54MM STOP END DZR BOSS 62241177 10MM ELBOW DZR BOSS 62241188 15MM ELBOW DZR BOSS 62241199 22MM ELBOW DZR BOSS 62241207 28MM ELBOW DZR BOSS 62241218 35MM ELBOW DZR BOSS 62241229 42MM ELBOW DZR BOSS 62241240 54MM ELBOW DZR BOSS 62241251 8X.25 BSPP MALE IRON ELBOW DZR 62241262 15X.5 BSPP MALE IRON ELBOW DZR 62241273 22X.75 BSPP MALE IRON ELBOW 62241284 28X1 BSPP MALE IRON ELBOW DZR 62241295 35X1.25 BSPP MALE IRON ELBOW 62241303 42X1.5 BSPP MALE IRON ELBOW 62241314 54X2 BSPP MALE IRON ELBOW DZR 62241325 15X.5 BSPP FEMALE IRON ELBOW 62241336 22X.75 BSPP FEMALE IRON ELBOW 62241347 28X1 BSPP FEMALE IRON ELBOW 62241358 35X1.25 BSPP FEMALE IRON ELBOW 62241369 42X1.5 BSPP FEMALE IRON ELBOW 62241380 54X2 BSPP FEMALE IRON ELBOW 62241391 15X.5 BENT SWIVEL TAP 62241410 15X.5 BSPP FI 2H W/PLATE ELBOW 62241421 22X.75 BSPP FI W/PLATE ELBOW 62241432 15X.5 BSPP FI WALL PLATE ELBOW 62241443 15MM EQUAL TEE DZR BOSS 62241454 22MM EQUAL TEE DZR BOSS 62241465 28MM EQUAL TEE DZR BOSS 62241476 35MM EQUAL TEE DZR BOSS 62241487 42MM EQUAL TEE DZR BOSS 62241498 54MM EQUAL TEE DZR BOSS 62241506 22X22X15MM REDUCED BRANCH TEE 62241517 28X28X15MM REDUCED BRANCH TEE 62241528 28X28X22MM REDUCED BRANCH TEE 62241539 35X35X15MM REDUCED BRANCH TEE 62241550 35X35X22MM REDUCED BRANCH TEE 62241561 35X35X28MM REDUCED BRANCH TEE 62241572 42X42X15MM REDUCED BRANCH TEE 62241583 42X42X22MM REDUCED BRANCH TEE 62241594 42X42X28MM REDUCED BRANCH TEE 62241602 54X54X15MM REDUCED BRANCH TEE 62241613 54X54X28MM REDUCED BRANCH TEE 62241624 15X15X.5 BSPP FEMALE TEE DZR 62241635 22X22X.5 BSPP FEMALE TEE DZR 62241646 22X22X.75 BSPP FEMALE TEE DZR 62241657 28X28X.5 BSPP FEMALE TEE DZR 62241668 28X28X1 BSPP FEMALE BRANCH TEE

Approval Holder:

BSS Industrial

Company Name

BSS Industrial

Address

Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of press-fit end connectors (gunmetal bodies) for use with copper pipe manufactured to BS EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112039

Size:

15mm – 54mm compression.

Marking:

Pegler Yorkshire, size and xpress on body.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

‘X press’ range comprising of models: 04305131. 04305132. 04305133. 04305141. 04305146. 04305151. 04305161.

Product Images

Approval Holder:

Pegler Yorkshire Ltd

Company Name

Pegler Yorkshire Ltd

Address

St Catherines Avenue, Balby Doncaster South Yorkshire

Postcode

DN4 8DF

Phone

+44 (0) 844 243 4400

View All Listings by this Company

Range of end feed copper solder fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112302

Size:

see models

Marking:

Hengshen logo (HS) and size on body.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

End feed fittings: 5090 (90°Elbow Close Ruff CxC) 6,8,10,12,15,22,28,35,42,54mm 5092 (90°Street Elbow Close Ruff) 6,8,10,12,15,22,28,35,42,54mm 5090R (Reducing 90° Elbow C×C) 12×10, 12×8, 15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28,42x22,54×42, 54×35, 54×28; 5041 (45°Elbow C×C) 6,8,10,12,15,22,28,35,42,54mm 5040 (45°Elbow FTG×C) 6,8,10,12,15,22,28,35,42,54mm 5002A (90°Elbow Long TurnC×C) 6,8,10,12,15,22,28,35,42,54mm 5001A (90°Street Elbow Long Turn Ftg×C) 6,8,10,12,15,22,28,35,42,54mm 5130 (Equal Tee C×C×C) 6,8,10,12,15,22,28,35,42,54mm 5130R (Reducing TEE C×C×C) 6x6x8, 8×8×6, 10×10×15, 12×12×10, 12×12×8, 12×10×10, 12×8×8, 15×15×22, 15×15×12, 15×15×10, 15x15x8, 15×12×15, 15×12×12, 15×12×10, 15×12×8, 15x10x15, 15x10x10, 22×22×28, 22×22×15, 22×22×12, 22×15×22, 22×15×15, 22×15×12, 28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28x15x28, 28x15x22, 28×15×15, 35×35×28, 35×35×22, 35×35×15, 35×28×35, 35×28×28, 35×28×22, 35×22×35, 35×22×28, 35×22×22, 35×15×35, 42×42×35, 42×42×28, 42×42×22, 42x42x15, 42×35×42, 42×28×42, 42×22×42, 54×54×42, 54×54×35, 54×54×28, 54×54×22, 54×54×15,54×42×54, 54×35×54 5270 (Equal Coupling C×C) 6,8,10,12,15,22,28,35,42,54mm 5240 (Reducing Coupling C×C) 8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15 5243 (Fitting Reducer Ftg×C) 8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15 5301 (Tube Cap) 6,8,10,12,15,22,28,35,42,54mm 5060 (Return Bend C×C) 6,8,10,12,15,22,28,35,42,54mm 5085 (Cross Over Coupling C×C) 15, 22mm 5086 (Partial Cross Over Ftg×C) 15, 22mm 5062 (Straight Tap Connector C×FI) 15×1/2”, 15×3/4”, 22×3/4”, 22×1",28×1" 5063 (Bent Tap Connector C×FI) 15×1/2”, 15×3/4”, 22×3/4”, 22×1",28×1" Solder ring fittings: SR5090 (90°Elbow Close Ruff C×C) 8,10,12,15,22,28,35,42,54mm SR5092 (90°Street Elbow Close Ruff Ftg×C) 15,22,28mm SR5090R (Reducing 90° Elbow C×C) 22×15, 28×22, 28×15 SR5041 (45°Elbow C×C) 8,10,12,15,22,28,35,42,54mm SR5040 (45°Elbow FTG×C) 15,22,28mm SR5130 (Equal Tee C×C×C) 8,10,12,15,22,28,35,42,54mm SR5130R (Reducing TEE C×C×C) 15×15×10, 15×15×12, 15×15×22, 22×22×28, 22×22×15, 22×22×12, 22×15×22, 22×15×15, 28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28×15×28, 28×15×22,28×15×15, 35×35×28, 35×35×22, 35×35×15, 42×42×35, 42×42×28, 42×42×22, 42×42×15, 54×54×42,54×54×35, 54×54×28, 54×54×22, 54×54×15 SR5270 (Equal Coupling C×C) 8,10,12,15,22,28,35,42,54mm SR5240 (Reducing Coupling C×C) 10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15 SR5243 (Fitting Reducer Ftg×C) 10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15 SR5301 (Tube Cap) 8,10,12,15,22,28,35,42,54mm SR5085 (Cross Over Coupling C×C) 15,22mm SR5086 (Partial Cross Over Ftg×C) 15,22mm SR5062 (Straight Tap Connector C×FI) 15×1/2”, 15×3/4”, 22×3/4” SR5063 (Bent Tap Connector C×FI) 15×1/2”, 15×3/4”, 22×3/4

Approval Holder:

Ningbo Hengsheng Pipe Fitting Co Ltd

Company Name

Ningbo Hengsheng Pipe Fitting Co Ltd

Address

No. 28 West Jinshui Road, Ninghai, Zhejiang

Country

China

Phone

0086-574-65338995

General Email

sales@hengshen.com

View All Listings by this Company

Range of under-sink, electrically heated vented water heaters (cased and insulated). Maximum operating temperature 98˚C

Section:

1390 Heaters

Section Subtitle:

Electric, thermal storage, mains fed, open outlet.

WRAS Approval Number:

2111346

Size:

3/8” BSP

Marking:

LISHUI, model and other tech info on adhesive label on body

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

2.4L,1500KW： LS5001351-11, LS5001351-12, LS5001351-21, LS5001351-22, LS5001352-11, LS5001352-12, LS5001352-21, LS5001352-22, LS5001353-11, LS5001353-12, LS5001353-21, LS5001353-22, LS5001354-12, LS5001354-32, LS5001354-22, LS5001354-42, LS5001355-11, LS5001355-12, LS5001355-21, LS5001355-22, LS5001357-11, LS5001357-12, LS5001357-21, LS5001357-22, LS5001358, LS5001361, LS5001362, LS5001363, LS5001364, LS5001365, LS5001366, LS5001367, LS5001368. 4L,2300KW： LS5001371, LS5001374, LS5001372-01, LS5001372-02, LS5001372-03, LS5001372-04, LS5001376-01, LS5001376-02, LS5001376-03, LS5001377-01, LS5001377-02, LS5001377-03, LS5001377-04, LS5001373, LS5001375.

Product Images

Approval Holder:

Xiamen Lishui Technology Co., Ltd.

Company Name

Xiamen Lishui Technology Co., Ltd.

Address

No. 1616, Guankou Road Jimei District Xiamen Fujian

Country

China

Phone

86 159 059 34 310

General Email

wolf@sinowiess.com

View All Listings by this Company

Manufacturer:

Xiamen Lilin Technology Co., Ltd.

Company Name

Xiamen Lilin Technology Co., Ltd.

Address

Unit 201 Building 5Haiyi Industrial Park No. 7, Kengping Road Xiamen Fujian

Country

China

General Email

View All Listings by this Company