Range of dual flush WC syphons incorporating polypropylene bodies and stainless-steel C-links. Cold water use only

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

250702707

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1 ½” BSP (M).

Marking:

Armitage Shanks and FreeFlo on top of flush valve

Installation Requirements:

R001 R556

Expiry date:

31/07/2030

Model:

EEM10073M67 (7.5”), EEM10073L67 (8”), EEM10073O67 (9.5”), EEM10073U67 (11.5”).

Approval Holder:

Ideal Standard (UK) Ltd

Company Name

Ideal Standard (UK) Ltd

Address

Old Road (Lodge 1) Armitage, Rugeley, Staffordshire

Postcode

WS15 4BT

Country

United Kingdom

General Email

tyeomans@idealstandard.co.uk

View All Listings by this Company

Range of WC dual flush drop valves with ABS bodies and silicon seals. The valves are operated via a push button assembly for either full or reduced flush and incorporate an internal, adjustable height overflow.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

250702719

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet and cold water use only.

Size:

1 1/2" BSP (M) (MFV1C and MFV2C) 2" BSP (M) (MFV3C and MFV4C)

Marking:

Multikwik website and NSG3338 on body or Multikwik Website on base of flush valve

Installation Requirements:

R001 R556 R571

Expiry date:

31/07/2030

Model:

0702120 MFV1C 0702121 MFV2C 0702122 MFV3C 0702123 MFV4C

Range of WC dual flush drop valves with ABS bodies and silicone seals. The valves are operated via a two push button assembly for either full or reduced flush and incorporate an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2311108

Size:

2” BSP (M)

Marking:

UK Bathrooms Ltd and product info on body.

Installation Requirements:

R001 R571 R580 R581

Expiry date:

30/11/2028

Model:

B218M B228 B2650

Product Images

Approval Holder:

UK Bathrooms Ltd

Company Name

UK Bathrooms Ltd

Address

Aston House Redburn Road Newcastle Upon Tyne

Postcode

NE5 1NB

View All Listings by this Company

Near boiling hot water dispensers with stainless steel tanks and flow is controlled via float switch. Maximum working pressure 3 Bar. Maximum operating temperature 98°C.

Section:

1380 Heaters

Section Subtitle:

Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

241202719

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/8” BSP M inlet/outlet

Marking:

Alfred Victoria "crown" logo on front of body. Model and product info on label on rear of body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

F104M

Approval Holder:

ALFRED VICTORIA LIMITED

Company Name

ALFRED VICTORIA LIMITED

Postcode

B45 9AL

View All Listings by this Company

Range of ultrasonic water meters with brass bodies and EPDM O-rings. The inlets incorporate a double check valve assembly, verified by test - suitable for backflow protection against Fluid Category 3. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Huizhong logo, Model No, DN, CR and product info on face. CR and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

SCL-61H-100 DN25: ¾” BSP (M) DN40: ¾” BSP (M)

Approval Holder:

Huizhong Instrumentation Co., Ltd.

Company Name

Huizhong Instrumentation Co., Ltd.

Address

No. 126 West Gaoxin Road, High‐Tech Industrial Development Zone, Tangshan City, Hebei Province

Country

China

View All Listings by this Company