Range of spout outlets incorporating stainless steel bodies (various finishes) and a plastic aerator. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2110305

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

QTOO (brand of D Line) on rosette.

Installation Requirements:

R001 R040

Expiry date:

31/10/2026

Model:

QA3080xxx Spout 115mm, rose 80mm, 45 degree. QA3090xxx Spout 115mm, rose 90mm, 45 degree. QA3180xxx Spout 190mm, rose 80mm. QA3190xxx Spout 190mm, rose 90mm. QA3280xxx Spout 250mm, rose 80mm. QA3290xxx Spout 250mm, rose 90mm. QA3380xxx Spout 191mm, rose 80mm, 45 degree. QA3390xxx Spout 191mm, rose 90mm, 45 degree. Where xxx denotes the surface finish (which is a non-water contact part). It can be 1 to 3 digits, which can be any combination of numbers and/or letters, as examples: M = brushed stainless steel finish, PP1 = polished PVD gunmetal finish.

Product Images

Approval Holder:

D Line

Company Name

D Line

Address

Jylingevej 59, kld Copenhagen

Postcode

2720

Country

Denmark

Phone

+4572170138

General Email

rik@dline.com

View All Listings by this Company

Range of wall mounted spout outlets incorporating brass bodies (various finishes) & plastic aerators. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2110318

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Methven on back plate or spout.

Installation Requirements:

R001 R040

Expiry date:

31/10/2026

Model:

WSP01XX WSP02XX WSP03XX WSP04XX WSP05XX WSP06XX WSP07XX WSP08XX Where xx denotes finish and is replaced with: CP = Chrome plated. BK = Matt black plated. BB - Brushed brass plated. BN - Brished nickel plated. GM = Gun metal plated.

Product Images

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Chlorine dioxide dosing system consisting of PVC-U pipework and fittings. Maximum operating pressure 7.0 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

2110076

Size:

Please refer to model.

Marking:

Scotmas, WRAS, model and operating parameters on adhesive label on body.

Installation Requirements:

R001 R120 R575

Expiry date:

31/10/2026

Model:

Bravo WA 2/50 Reactor: ½” BSP (F) inlet x 2” BSP (F) outlets. Bravo WA 4/210 Reactor: ½” BSP (F) inlet and outlets.

Product Images

Approval Holder:

Scotmas Group

Company Name

Scotmas Group

Address

Scotmas Buildings, Solomon Way, Pinnaclehill Industrial Estate, Kelso, TD5 8AU

View All Listings by this Company

Manufacturer:

Scotmas Group

Company Name

Scotmas Group

Address

Scotmas Buildings, Solomon Way, Pinnaclehill Industrial Estate, Kelso, TD5 8AU

View All Listings by this Company

Expansion vessels incorporating a stainless steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 100˚C.

Section:

1000 Expansion Vessels

Size:

½” BSP (M)

Marking:

Aquasystem, model, serial No, date of manufacture (DD/MM/YYY) & other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

WSA050 = 0.50 litre WSA100 = 1 litre WSA200 = 2 litres

Product Images

Approval Holder:

Zilio Industries SPA

Company Name

Zilio Industries SPA

Address

Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)

Country

Italy

Phone

[+39] 049 59 57 552

General Email

info@zilioindustries.com

View All Listings by this Company

Range of filling loop assemblies consisting of an in-line isolation valve, in-line double check valve assembly which also incorporates an isolation valve (suitable for back flow protection against fluid category 3) and stainless steel braided EPDM lined hose. The isolation valves are operated via a single lever. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1015 Filling Loop

Size:

See model

Marking:

IDC logo (~E~ within a circle), WRAS and year of manufacture (YYYY) stamped on ferrule. IDC logo, CR, size and flow arrow on check valve assembly.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

1FLA002I: 14.7mm DCV x 14.7mm straight ISO, DN10 1FLA006I: 14.7mm DCV x 14.7mm straight ISO with pressure gauge, DN10 1FLA002: 15mm DCV x 15mm straight ISO, DN10 1FLA003: 15mm DCV x 15mm Tee ISO, DN10 1FLA004: 15mm DCV&ISO x 15mm straight ISO, DN10 1FLA005: 15mm DCV&ISO x 15mm Tee ISO, DN10 1FLA006: 15mm DCV x 15mm straight ISO with pressure gauge, DN10

Product Images

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC Fluid Control Co., Ltd.

Company Name

IDC Fluid Control Co., Ltd.

Address

No.6, Shengyuan Road, Mechanical & Electrical Industrial Zone, Yuhuan City, Zhejiang, Taizhou City, Zhejiang Province, P. R.China

Country

China

General Email

View All Listings by this Company

Range of inline water filter cartridges with polypropylene housing with a carbon block filter. Maximum working pressure 8.5 Bar Cold water use only.

Section:

1055 Filter Cartridges

Size:

15.6mm OD

Marking:

PARAGOR WATER SYSTEMS, max temperature, max pressure, model and other technical info on adhesive label on body.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

30/09/2026

Model:

ECB1PBALKDF2 ECB1PBALKDF4

Approval Holder:

Paragon Water Systems, Inc.

Company Name

Paragon Water Systems, Inc.

Address

13805 Monroes Business Park, Tampa Fl. 33635 USA

General Email

cbird@paragonwater.com

View All Listings by this Company

Range of inline water filter cartridges with polypropylene housing with a carbon block filter. Maximum working pressure 8.5 Bar Cold water use only.

Section:

1055 Filter Cartridges

Size:

15.6mm OD

Marking:

Clearwater, max temperature, max pressure, model and other technical info on adhesive label on body.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

30/09/2026

Model:

PURE F6C1 & PURE F12C1 FILTER CARTRIDGE

Approval Holder:

Clearwater Products Ltd

Company Name

Clearwater Products Ltd

Address

Unit 5603 Shannon Place Tewkesbury Place

Postcode

GL20 8SL

View All Listings by this Company

Range of copper press fittings with EPDM ‘O’-rings for use with EN1057 copper tube. The joints are achieved by means of a press tool. For above and below ground use (sizes 12mm-54mm only. 66.7mm, 76.1mm, 88.9mm & 108mm for above ground use only) Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2107306

Size:

12mm - 108mm.

Marking:

JT, WRAS & size on body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

Press fitting-elbow 90°CXC MP5090: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Press fitting-elbow 90°FTGXC MP5092: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Press fitting-elbow 45° CXC MP5041: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Press fitting-elbow 45°FtgxC MP5040 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Press fitting-crossover CXC MP5085: 15mm, 22mm, 28mm Press fitting-crossover FTGXC MP5086: 15mm, 22mm, 28mm Press fittng-Straight Coupling MP5270: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Press fitting-equal tee MP5130: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Press fitting-reducing Tee MP5130R: 15x15x22mm 22x15x15mm 22x15x22mm 22x22x15mm 22x22x28mm 28x15x15mm 28x15x22mm 28x22x15mm 28x22x22mm 28x22x28mm 28x28x15mm 28x28x22mm 28x28x35mm 35x22x22mm 35x22x35mm 35x28x22mm 35x28x28mm 35x28x35mm 35x35x15mm 35x35x22mm 35x35x28mm 40x28x28mm 42x35x35mm 42x28x42mm 42x35x42mm 42x42x15mm 42x42x22mm 42X42X28mm 42X42X35mm 54X54X15mm 54X54X28mm 54X54X35mm 54X42X42mm 54X54X42mm Press fitting-fitting reducer FTGXC MP5243: 22x15mm 28x15mm 28x22mm 35x15mm 35x22mm 35x28mm 42x15mm 42x22mm 42x28mm 42x35mm 54x15mm 54x22mm 54x28mm 54x35mm 54x42mm Press fitting- reducer CXC MP5240 22x15mm 28x15mm 28x22mm 35x15mm 35x22mm 35x28mm 42x15mm 42x22mm 42x28mm 42x35mm 54x15mm 54x22mm 54x28mm 54x35mm 54x42mm Press fitting-end stop MP5301: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Models added November 24: Press fitting - Extended slip coupling MP5270E: 12mm, 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 66.7mm, 76.1mm, 88.9mm, 108mm. Press fitting - Crossover FTGxC MP5086: 12mm, 18mm. Press fitting-Straight Coupling MP5270: 12mm, 18mm, 66.7mm 76.1mm 88.9mm 108mm. Press fitting-equal tee MP5130: 12mm, 18mm, 66.7mm 76.1mm 88.9mm 108mm. Press fitting- reducer CXC MP5240: 15x12mm 18x15mm 22x18mm 28x18mm 22x15mm 28x15mm 28x22mm 35x15mm 35x22mm 35x28mm 42x15mm 42x22mm 42x28mm 42x35mm 54x15mm 54x22mm 54x28mm 54x35mm 54x42mm MP5243 Press fitting-fitting reducer FTGXC: 15x12mm 18x12mm 18x15mm 22x18mm 28x18mm 66.7x28mm 66.7x35mm 66.7x42mm 66.7x54mm 76.1x35mm 76.1x42mm 76.1x54mm 76.1x66.7mm 88.9x42mm 88.9x54mm 88.9x76.1mm 108x42mm 108x54mm 108x66.7mm 108x76.1mm 108x88.9mm. MP5041 Press fitting-elbow 45° CXC: 12mm 18mm 66.7mm 76.1mm 88.9mm, 108mm. MP5090 Press fitting-elbow 90° CXC: 12mm 18mm 66.7mm 76.1mm 88.9mm 108mm. MP5040 Press fitting-elbow 45° Ftg x C: 12mm 18mm 66.7mm 76.1mm 88.9mm 108mm. MP5092 Press fitting-elbow 90° FTGXC: 12mm 15mm 18mm 22mm 28mm 35mm 42mm 54mm 66.7mm 76.1mm 88.9mm 108mm. MP015 Press fitting-copper bend with plain ends 15°: 28mm 35mm 42mm 54mm. MP030 Press fitting-copper bend with plain ends 30°: 28mm 35mm 42mm 54mm. MP045 Press fitting-copper bend with plain ends 45°: 28mm 35mm 42mm 54mm. MP060 Press fitting-copper bend with plain ends 60°: 28mm 35mm 42mm 54mm. MP090 Press fitting-copper bend with plain ends 90°: 15mm 18mm 22mm 28mm 35mm 42mm 54mm. CR030 Press fitting-copper reduced cross 30°: 18mmx15mm 22mmx15mm 28mmx15mm. BR00 Press fitting-copper bridge with plain ends: 12mm 15mm 22mm 28mm. MP5085 Press fitting-crossover CxC: 12mm 18mm. MP5092R Press fitting-Reducing elbow CxC: 22mmx15mm 28mmx15mm 28mmx22mm. MP5130 Press fitting-equal tee: 12mm 18mm 66.7mm 76.1mm 88.9mm 108mm. MP5130R Press fitting-reducing Tee: 15x12x12mm 15x15x12mm 18x18x12mm 18x15x15mm 18x18x15mm 18x15x18mm 22x22x12mm 22x22x18mm 28x28x18mm 35x35x15mm 35x35x18mm 42x42x18mm 54x54x22mm 66.7x66.7x22mm 66.7x66.7x28mm 66.7x66.7x35mm 66.7x66.7x42mm 66.7x66.7x54mm 76.1x76.1x22mm 76.1x76.1x28mm 76.1x76.1x35mm 76.1x76.1x42mm 76.1x76.1x54mm 76.1x76.1x66.7mm 88.9x88.9x22mm 88.9x88.9x28mm 88.9x88.9x35mm 88.9x88.9x42mm 88.9x88.9x54mm 88.9x88.9x76.1mm 108x108x22mm 108x108x54mm 108x108x66.7mm 108x108x76.1mm 108x108x88.9mm. MP5301 Press fitting-end stop: 12mm 18mm 66.7mm 76.1mm 88.9mm 108mm.

Product Images

Approval Holder:

Ningbo Jintian Copper Tube Co Ltd

Company Name

Ningbo Jintian Copper Tube Co Ltd

Address

No.1 ChengXi West Road, CiCheng, NingBo

Country

China

Phone

0086 574 8757 4425

General Email

audrey@jtcorp.com.cn

View All Listings by this Company

Unidelta range of compression fittings with polypropylene bodies with EPDM ‘O’ rings for use with PE100 polyethylene pipe (manufactured to EN12201). Maximum working pressure 16.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2111701

Note:

For above and below ground use

Size:

20mm, 25mm, 32mm, 40mm, 50mm, 63mm

Marking:

Unidelta, pressure rating & size on the compression nut

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

Straight coupler (1001) Reducing coupler (1002) Male adapter (1003) Female adapter (1004) 90° Tee (1005) 90° Elbow (1006) 90° Tee with female threaded take off (1007) 90° Elbow with threaded male take off (1008) 90° Elbow with threaded female take off (1009) 90° Tee with threaded male take off (1010) End plug (1012) 90° reducing tee (1013) Repair slip coupler (1014) Female tee with peg fitting (1012) 90° Elbow with lateral thread take off (1023) 90° Tee with increased take off (1029) Wall plate elbow (1034)

Approval Holder:

Unidelta SpA

Company Name

Unidelta SpA

Address

Via Capparola Sotto 4, 25078 Vestone (Brescia)

Country

Italy

View All Listings by this Company

Manufacturer:

Unidelta SpA

Company Name

Unidelta SpA

Address

Via Capparola Sotto 4, 25078 Vestone (Brescia)

Country

Italy

View All Listings by this Company

Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2106009

Size:

12mm - 108mm.

Marking:

Taizhou Double Winner logo (dbw in a box) and size on body.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

6270 & 6270CP Copper Press Coupling: 12 - 108mm. 6271 & 6271CP Copper Press Coupling: 12 - 54mm. 6240 & 6240CP Reducer press x press: 15mmx12mm - 54mmx42mm. 6243 & 6243CP Reducer x press: 15mmx12mm - 108mm x 88.9mm. 6001& 6001CP Bend 90° x press: 12-108mm. 6002 & 6002CP Bend 90° press x press: 12 - 108mm. 6130 & 6130CP Equal Tee 3 x press: 12 - 108mm. 6040 & 6040CP Bend 45° x press: 12 - 108mm. 6041& 6041CP Bend 45° press x press: 12 - 108mm. 6301 & 6301CP Endcap press: 12 - 108mm. 6131 & 6131CP Reducing Tee 3 x press: 15mmx15mmx12mm - 108mm x 76.1mm x 108mm. 6085 & 6085CP Full Crossover: 15mm x 15mm - 22mm x 22mm. 6086 & 6086CP Partial Crossover: 15mm x 15mm - 22mm x 22mm. 6510 & 6510CP Flange PN16: 76.1mm. Chrome plated models added 02/06/2023

Approval Holder:

Taizhou Double Winners Copper Co., Ltd

Company Name

Taizhou Double Winners Copper Co., Ltd

Address

#2‐902, Z Center, No. 185 Wenxue Road, Jiaojiang, Taizhou, 31800, Zhejiang, China

View All Listings by this Company