'Arctic Hayes Silicone Spray (code: PH040)'. Clear, Silicone Lubricant Spray. Apply as per manufacturer's packaging instructions. For use with water up to 85°C.
'Berulub Sihaf 2'. White coloured lubricant. Apply as per manufacturer's instructions. No cure required. For use with water up to 85°C.
'Grivory HT1VA-5 FWA black 9225'. Black coloured, injection moulded nylon material. For use with water up to 85°C.
'RADILON® S RV350RKC2 306 BK'. Black coloured, injection moulded, 35% glass fibre reinforced, PA6 material. For use with water up to 85°C.
'Keyplumb Fittings'. Injection moulded, polybutylene pushfit fittings available in white and grey colours. For use with water up to 85°C.
'METALPEX PEX-AL-PEX pipe'. Extruded, multi-layered pipe comprising of an off-white PEX inner layer, an aluminium middle layer and white coloured PEX outer layer. For use with water up to 85°C.
'Qual-PEX Barrier Pipe'. Triple layered, extruded pipe consisting of a white coloured PEX inner & outer layer and a grey coloured EVOH middle layer. For use with water up to 85°C.
'Elofit'. Black coloured, injection moulded, PE100 electrofusion & spigot fittings. For use with water up to 85°C.
'TP14371'. Blue coloured polyethylene material manufactured by roto-moulding. For use with water up to 85°C.
‘4TECH 9S20000 W-A ABK’. Black coloured, injection moulded, unfilled PPO/HIPS material. Between February 2024 and April 2025, it was for use with water up to 23°C. Between May 2025 and February 2029, it’s for use with water up to 85°C.
'Vialli – De PP-RCT Pipes (with Aluminium Layer)'. Multi-layered, extruded pipes comprising of a green coloured PP-RCT inner and outer layer and an aluminium middle layer. For use with water up to 85°C.
'Vialli – De PP-RCT Pipes (with Glass Fiber)'. Multi-layered, extruded pipes comprising of a green coloured, PP-RCT inner and outer layer layer and red coloured, glass fibre middle layer. For use with water up to 85°C.
'Wavin PP-R Monolayer Pipe'. White coloured (opaque), extruded PP-R pipe. For use with water up to 85°C.
'Wavin PP-R Fittings'. White coloured (opaque), injection moulded PP-R fittings. For use with water up to 85°C.
'BAILUN PPR Pipe (PPR0411)'. White coloured, extruded PPR pipe. For use with water up to 85°C.
'BAILUN PPR Fittings (PPR051315)'. White coloured, injection moulded PPR fittings. For use with water up to 85°C.
'VASEN PPR Pipe'. Green coloured (with red coloured external stripe), extruded PPR pipe. For use with water up to 85°C.
'VASEN PPR Fitting'. Green coloured, injection moulded PPR fitting. For use with water up to 85°C.
'T MECH PP-RCT pipe'. Green coloured (opaque), extruded PP-RCT pipe. For use with water up to 85°C.
'T MECH PP-RCT Multilayer Pipe'. Extruded, multi-layered pipe comprising of a green coloured (opaque) inner & outer layer and a black coloured (opaque) middle layer. For use with water up to 85°C.
'T MECH PP-RCT fittings'. Green coloured (opaque), injection moulded PP-RCT fittings. For use with water up to 85°C.
'Fluon CD127E'. White coloured, extruded PTFE material. For use with water up to 85°C.
'EP7007PF 'O' ring'. Black coloured, compression moulded EPDM 'O' rings. Shore hardness 70. Tested in-radius size 0.89mm. For use with water up to 85°C.
'51M7531 Diaphragm'. Black coloured, calendered, EPDM diaphragm. Shore hardness 75. Tested in-radius size 0.5mm. For use with water up to 85°C.
'EPDM E293'. Black coloured, compression moulded EPDM material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 85°C.
'N57140'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.
‘51M5577, 51M6077, 51M6577, 51M7077, 51M7577, 51M8077, 51M8577’. Black coloured, injection moulded EPDM materials. Shore hardness between 55A & 85A. Tested in-radius size 1.0mm. For use with water up to 85°C.
'ASHUTOSH EPDM 50' & 'ASHUTOSH EPDM 80'. Black coloured, compression moulded EPDM materials with a shore hardness of 50 & 80. Tested in-radius size 1.2mm. For use with water up to 23°C.
'RBL-9200KW'. Colourless, transparent silicone rubber material. Shore hardness 50. Tested in-radius size 1.0mm. For use with water up to 85°C.
'Silopren LSR 2742'. Colourless (translucent), compression moulded silicone elastomeric material. Shore hardness 38. Tested in-radius size 1.0mm. For use with water up to 85°C.
'Weld-On 748 ECO Blue PVC Cement'. Blue coloured solvent cement. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
‘Grilamid TR 30 natural, TR 30 LS natural (appear colourless, translucent), TR 30 LS blue 4345, TR 30 LS blue 4387 & TR 30 LS blue 4396 (blue coloured)’. Injection moulded, PA 61/X materials. For use with water up to 85°C.
'BENVIC IR712ES/9738' & 'BENVIC IR745ES/9738'. Grey coloured, compression moulded PVC materials. For use with water up to 23°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 71 440 xx0 | Various | 1/2" BSP (M) | 10 bar | 60 °C | Hansgrohe | Operating Member | Yes | Ceramic cartridge | Not Applicable | Aerator | |
| 71 450 xx0 | Various | 1/2" BSP (M) | 10 bar | 60 °C | Hansgrohe | Operating Member | Yes | Ceramic cartridge | Not Applicable | Aerator |
Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Wall mounted, two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a non-rising spindle headwork with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge incorporating a single lever operating member. Each inlet incorporates a combined washer and stainless-steel strainer, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a self-cancelling diverter to shower outlet with Type HC device (verified by test - suitable for backflow protection against Fluid Category 3) and a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C
Range of hand showers and shower arm kits with (brass bodies - various finishes. The inlets of the hand showers and the inlet elbows incorporate approved check valve cartridges; however, the complete products have not been fully tested to demonstrate they provide backflow protection. Open outlet use only. Maximum operating temperature 65°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| GUTH72 | 1/2" | 6 bar | 65 °C | Waterworks | Body | No | Not applicable | Not Applicable | Not Applicable | ||
| GUTH73 | 1/2" | 6 bar | 65 °C | Waterworks | Body | No | Not applicable | Not Applicable | Not Applicable | ||
| GUTH62 * | 1/2" | 6 bar | 65 °C | Waterworks | Body and tile guard | No | Not applicable | Not Applicable | Not Applicable | ||
| GUTH63 * | 1/2" | 6 bar | 65 °C | Waterworks | Body and tile guard | No | Not applicable | Not Applicable | Not Applicable |
Product Identification(s) with an * as suffix = models added 11/08/2025
Range of double check valve assemblies, incorporating two spring loaded resilient trim in-line check valve cartridges housed in DZR brass. Compression connection to be used with copper pipe EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of one piece (black) plastic storage cisterns supplied with a screened vent. Cold water use only.
Range of deck mounted ceramic cartridge and single sequential headwork assemblies, (brass bodies – various styles and finishes), incorporating a range of operating members. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.
Range of quarter turn ceramic discs headworks. Maximum working pressure 10.0 Bar Maximum operating temperature 85 °C.
Range of quarter turn ceramic disc headworks with brass bodies (various finishes), silicone seals, and NBR ‘O’-rings for insertion into specifically dimensioned tap assemblies. TKG1/2-1 (plain brass), TKG1/2-1 CP (chrome plated finish) and TKG1/2-1 SS (stainless steel finish). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| AB-2047-F | 34.0 mm Ø | 24 bar | 85 °C | Xingle | Body | No | |||||
| AB-2053-F | 33.6 mm Ø | 24 bar | 85 °C | Xingle | Body | No | |||||
| AB-2057-F | 26.8 mm Ø | 24 bar | 85 °C | Xingle | Body | No | |||||
| AB-2058-F | 27.5 mm Ø | 24 bar | 85 °C | Xingle | Body | No | |||||
| AB-2058-S | 27.2 mm Ø | 24 bar | 85 °C | Xingle | Body | No | |||||
| AB-2059-F | 34.0 mm Ø | 24 bar | 85 °C | Xingle | Body | No |
Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener or a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SL-T21002L | Various | M10*1 | 10 bar | 60 °C | Company logo | Rear of body | No | Ceramic cartridge | C-plate | Flow Straightener | |
| SL-T21002 | Various | M10*1 | 10 bar | 60 °C | Company logo | Rear of body | No | Ceramic cartridge | C-plate | Flow Straightener | |
| SL-T21002M | Various | M10*1 | 10 bar | 60 °C | Company logo | Rear of body | No | Ceramic cartridge | C-plate | Flow Straightener | |
| SL-T31502 | Various | M10*1 | 10 bar | 60 °C | Company logo | Rear of body | No | Ceramic cartridge | C-plate | Flow Straightener | |
| SL-T31502M | Various | M10*1 | 10 bar | 60 °C | Company logo | Rear of body | No | Ceramic cartridge | C-plate | Flow Straightener | |
| SL-T21202 | Various | M10*1 | 10 bar | 60 °C | Company logo | Rear of body | No | Ceramic cartridge | C-plate | Flow Straightener | |
| SL-T21202M | Various | M10*1 | 10 bar | 60 °C | Company logo | Rear of body | No | Ceramic cartridge | C-plate | Flow Straightener | |
| SL-T21202L | Various | M10*1 | 10 bar | 60 °C | Company logo | Rear of body | No | Ceramic cartridge | C-plate | Flow Straightener | |
| SL-T50802L | Various | M10*1 | 10 bar | 60 °C | Company logo | Rear of body | No | Ceramic cartridge | C-plate | Open Outlet | |
| SL-T50802M | Various | M10*1 | 10 bar | 60 °C | Company logo | Rear of body | No | Ceramic cartridge | C-plate | Open Outlet | |
| SL-T50802 | Various | M10*1 | 10 bar | 60 °C | Company logo | Rear of body | No | Ceramic cartridge | C-plate | Open Outlet | |
| SL-T10102 | Various | M10*1 | 10 bar | 60 °C | Company logo | Rear of body | No | Ceramic cartridge | C-plate | Filter | |
| SL-T20402 | Various | M10*1 | 10 bar | 60 °C | Company logo | Rear of body | No | Ceramic cartridge | C-plate | Flow Straightener | |
| SL-T40202 | Various | M10*1 | 10 bar | 60 °C | Company logo | Rear of body | No | 1/4 Turn ceramic disk | C-plate | Flow Straightener | |
| SL-T40102W | Various | M10*1 | 10 bar | 60 °C | Company logo | Rear of body | No | Non-rising spindle | C-plate | Flow Straightener |
Various finish: (1) Without suffix to current model number: Chrome plated (2) With suffix B: Black (3) With suffix BB: Brushed brass (4) Models SL-T40202 & SL-T40102W with suffix G: Champagne Gold
Combination Tap assemblies incorporating ceramic cartridge or ceramic disc headworks.
Combination Tap assemblies incorporating ceramic cartridge or ceramic disc headworks.
Range of single hole, single outlet (fixed) pillar tap with brass bodies (chrome plated), incorporating ceramic disc headwork and single lever operating member. Spout outlet incorporates a plastic aerator. Maximum working pressure 5- 10.0 bar (see models). Maximum operating temperature 60°C – 85°C (see models).
Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator or flow straightener. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator or a plastic flow straightener. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.operating temperature 60°C.
Page 145 of 158
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
