Plastic turbine for insertion into specifically dimensioned flow meters. Maximum operating temperature 85°C. Open outlet use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

19.17mm

Marking:

T moulded on body

Installation Requirements:

R001 R008

Expiry date:

30/04/2030

Model:

Model "T"

Approval Holder:

Elbi International Spa

Company Name

Elbi International Spa

Address

Via Italia 54 10093 Collegno (TO) Italy

View All Listings by this Company

Range of ‘SureCal’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

RT – 1.1/4” BSP (M) to 2.1/4” BSP (M) RF – 48 mm OD

Marking:

'SureCal' logo, Model, Voltage, Size and other information on label.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

Model Code: XXYZS Where XX denotes the boss type and can be replaced with any of the following: RT = Thread Type RF = Flange Type Where Y denotes the heating tube material and can be replaced with any of the following: 1 = Copper 2 = AISI 304 / AISI 304L 3 = AISI 321 4 = AISI 316 / AISI 316L 5 = Alloy 800 / Alloy 825 / Alloy 840 6 = Titanium 7 = AISI 309S 8 = AISI 310 Where Z denotes the brazing system and can be replaced with any of the following: A = Tin Alloy B = Silver Alloy C = Itek Brazing Where S denotes the surface enamelling and can be replaced with either of the following: S = Enamelled Blank = Not Enamelled

Approval Holder:

Thermowatt S.p.A.

Company Name

Thermowatt S.p.A.

Address

Via San Giovanni Battista 21 Arcevia

Postcode

60011

Country

Italy

Phone

+39 0731988246

General Email

thermowatt@legalmail.it

View All Listings by this Company

Range of single and twin ended shower booster pumps with plastic bodies and plastic impellers. The inlets/outlets incorporate stainless steel braided EPDM lined flexible hose assemblies with isolation valves and stainless-steel strainers. The outlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. The Universal Twin models incorporate an expansion vessel. Maximum working pressure 1.5, 1.8, 2.0, 2.5, 2.6, 3.0 Bar (see model for more details). Maximum operating temperature: 60.0°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250802702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm, 21mm or 22mm Push fit connections for use with copper pipe EN1057

Marking:

Salamander Pumps logo on body. Salamander Pumps and technical information on adhesive label on body

Installation Requirements:

R001 R150 R415

Expiry date:

31/08/2030

Model:

CT RANGE: CT50+XTRA 15mm, CT50XTRA 15mm, CT54XTRA 15mm, CT55+XTRA 15mm, CT55XTRA 15mm, CT59XTRA 15mm, CT75+XTRA 15mm, CT75XTRA 15mm, CT79XTRA 15mm, CT85+XTRA 15mm, CT85XTRA 15mm, CT89XTRA 15mm, CT60B 15mm, CT60BU 15mm, CT64HUXTRA 15mm, CT64HXTRA 15mm, CT80B 22mm, CT80BU 22mm, CT84HUXTRA 21mm, CT84HXTRA 21mm, CTFORCE15IPT 21mm, CTFORCE15ITU 21mm, CTFORCE15PT 22mm, CTFORCE15TU 22mm, CTFORCE20IPS 21mm, CTFORCE20IPT 21mm, CTFORCE20ISU 21mm, CTFORCE20ITU 21mm, CTFORCE20PT 22mm, CTFORCE20PS 22mm, CTFORCE20SU 22mm, CTFORCE20TU 22mm, CTFORCE30IPS 21mm, CTFORCE30IPT 21mm, CTFORCE30ISU 21mm, CTFORCE30ITU 21mm, CTFORCE30PS 22mm, CTFORCE30PT 22mm, CTFORCE30SU 22mm, CTFORCE30TU 22mm, ACTFORCE30SU 22mm. KEY: XTRA = Plastic Ended, B = Plastic Ended with Plastic Bypass, H = Plastic Ended with Plastic Bypass (Ireland), FORCE = Brass Ended, A = Manufactured for a separate company. U = Includes expansion vessel, P = No expansion vessel, T= Twin ended pump, S = Single ended pump, I = sold in Ireland, + = supplied with couplers with isolating valves. The XTRA models without a + come with couplers without isolating valves. The rest of the product ranges include isolating valves as standard. 50/54/55/59/15 = 1.5 Bar, 60/64 = 1.8 Bar, 75/79/20 = 2.0 Bar, 85/89 = 2.5 Bar 80/84 = 2.6 Bar, 30 = 3.0 Bar.

Manufacturer:

Salamander Pumps

Company Name

Salamander Pumps

Postcode

SR5 3XE

Country

United Kingdom

Phone

0191 535 4528

View All Listings by this Company

Range of multi-stage semiaxial submersible pumps with stainless steel bodies and impellers. Please note, this approval does not cover the motor, motor connection kit or power cable necessary for the pump to operate. Open outlet use only. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250504706

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

140 SX models: 3” GAS FLANGED outlet conenection, 180 SX models: 5” GAS FLANGED outlet conenection, 230 SX models: 6” GAS FLANGED outlet conenection, 270 SX models: DN200 FLANGED outlet conenection.

Marking:

Panelli logo, model type, serial no., made in Italy, production date (MM/YY) and other techical info on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2030

Proviso:

Open outlet use only.

Model:

140 SX 34/XX, 140 SX 44/XX, 140 SX 54/XX, 140 SX 64/XX, 180 SX 102/ XX, 180 SX 124/XX, 180 SX 140/XX, 180 SX 78/XX, 180 SX 90/XX, 230 SX 200/XX (DRXX), 230 SX 220/XX (DRXX), 230 SX 240/XX (DRXX), 230 SX 280/XX (DRXX), 270 SX 370/XX (DRXX), 270 SX 440/XX (DRXX) (A). Where: 140-180-230-270 = pump diameter. 140: 6”, 180: 8”, 230: 10”, 270: 12”. SX: Semi-axial pump family. 34-440: Flow. /XX = Number of stages (XX will be replaced by 1 or 2 digits as follows). 140 SX 34: 3 to 27, 140 SX 44: 3 to 22, 140 SX 54: 3 to 22, 140 SX 64: 1 to 18, 180 SX 102: 1 to 15, 180 SX 124: 1 to 13, 180 SX 140: 1 to 12, 180 SX 78: 1 to 19, 180 SX 90: 1 to 17, 230 SX 200: 1 to 9, 230 SX 220: 1 to 7, 230 SX 240: 1 to 7, 230 SX 280: 1 to 7, 270 SX 370: 1 to 5, 270 SX 440: 1 to 5. Optional: DRXX = Impeller diameter reduction in mm. XX can either be 10 or 20. A = Impeller with corner reduction.

Approval Holder:

Panelli S.r.l.

Company Name

Panelli S.r.l.

Address

Via Rana 63/65 Z.I D5 Spinetta Marengo

View All Listings by this Company

Manufacturer:

Panelli S.r.l.

Company Name

Panelli S.r.l.

Address

Via Rana 63/65 Z.I D5 Spinetta Marengo

View All Listings by this Company

STORMBOOST range of domestic water pressure booster pumps with brass impellors, brass bodies with accumulators, available from 60 – 300 litres (please refer to model). Models are supplied with reducing bushes, pressure gauges, pressure reducing valves and double check valve assemblies housed in DZR brass bodies with isolation valves and strainers. Maximum working pressure 4.5 bar. Maximum operating temperature 23°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250508702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless-steel braided TPS lined flexible hose assemblies with 15mm push fit connections, for use with copper, PB and PEX pipe.

Marking:

Stuart Turner, model number and technical information on adhesive label on pump.

Installation Requirements:

R001 R009 R415

Expiry date:

31/05/2030

Model:

47714 STORMBOOST 60 with 60 litre accumulator, 47715 STORMBOOST 80 with 80 litre accumulator, 47716 STORMBOOST 100 with 100 litre accumulator, 47717 STORMBOOST 200 with 200 litre accumulator, 47718 STORMBOOST 300 with 300 litre accumulator.

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company