Range of in-line single jet water meters with brass bodies. Products incorporate plastic strainers. Maximum working pressure: 16.0 Bar. Maximum operating temperature: 85.0°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN15 Models: 1/2” BSP (M) DN20 Model: 3/4” BSP (M).

Marking:

Flow arrow on body. BMETERS, serial number and other technical info on meter face.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

HYDRODIGIT-S1 DN15 Length: 80mm, 110mm, 145mm, 165mm. DN20 Length: 130mm, 190mm.

Manufacturer:

B Meters S.r.l

Company Name

B Meters S.r.l

Address

Via Friuli 3 33050 Gonars (UD) Italy

View All Listings by this Company

Range of water meter manifolds with plastic bodies for use with PE80 pipe (manufactured to BS EN 12201) and copper pipe. The products incorporate a drain off valve, plastic strainer and a single check valve cartridge however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm & 22mm Compression. 25mm Pushfit. Models added November 2025: ¾” x ¾”. ¾” x 15mm. ¾” x 22mm.

Marking:

Talbot, PN 16 & flow arrow on body

Installation Requirements:

R001 R008 R511

Expiry date:

28/02/2030

Model:

MA3261522AM Internal Meter Manifold Drain off MA3262215AM Internal Meter Manifold Drain off MA3262222AM Internal Meter Manifold Drain off MA3262515AM Internal Meter Manifold Drain off MA3262522AM Internal Meter Manifold Drain off MA3261515BM Internal Meter Manifold Blank plug MA3261522BM Internal Meter Manifold Blank plug MA3262215BM Internal Meter Manifold Blank plug MA3262222BM Internal Meter Manifold Blank plug MA3262515BM Internal Meter Manifold Blank plug MA3262522BM Internal Meter Manifold Blank plug Models added November 2025: 198003403410166 Internal Meter Manifold. 198003401510161 Internal Meter Manifold. 198003402210161 Internal Meter Manifold.

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Range of test port assemblies with DZR brass bodies. Maximum working pressure 25.0 Bar. Maximum operating temperature 100°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” ULF (15mm ULF), ½” LF (15mm LF), ½” (15mm), ¾” (20mm), 1” (25mm), 1”1/4” (32mm), 1”1/2” (40mm), 2” (50mm).

Marking:

RUBINETTERIE logo, flow arrow, thread size, DN, PN, DR and batch number on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

B-Heat - 200402.

Approval Holder:

Rubinetterie Bresciane Bonomi S.p.A

Company Name

Rubinetterie Bresciane Bonomi S.p.A

Address

Via Massimo Bonomi, 1 Gussago (BS)

Postcode

25064

Country

Italy

Phone

+39 030 82 50 212

View All Listings by this Company

Manufacturer:

Rubinetterie Bresciane Bonomi S.p.A

Company Name

Rubinetterie Bresciane Bonomi S.p.A

Address

Via Massimo Bonomi, 1 Gussago (BS)

Postcode

25064

Country

Italy

Phone

+39 030 82 50 212

View All Listings by this Company

Range of electronic pump controllers with plastic bodies. Maximum working pressure 12.0 Bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

COELBO CONTROL SYSTEM, S.L and technical information on adhesive label on body. Speedmatic on control panel.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

S101083 Speedmatic 101110 MASTER CB (1.1/4” BSP (M)) S101541 Speedmatic 101110 (1.1/4” BSP (M)) S101104 Speedmatic easy CB (1.1/4” BSP (M)) S101542 Speedmatic easy (1.1/4” BSP (M)) S101543 Ecodrive (1” BSP (M)) U471037 Onematic (1.1/4” BSP (M))

Manufacturer:

COELBO CONTROL SYSTEM, S.L.

Company Name

COELBO CONTROL SYSTEM, S.L.

Address

Ctra. De Rubí, 288 Terrassa

Postcode

08228

Country

Spain

View All Listings by this Company

Range of spherical valves with a DZR brass body and lever. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

Altecnic logo casted on body; CR, date of manufacture (YYMM); CR etched on body and on 0560/05MC

Installation Requirements:

R001 R511

Expiry date:

31/03/2030

Model:

O560/05FL-HI ¾”BSP(M) O560/05DH ¾”BSP(M) O560/05RT ¾”BSP(M) - with drain valve O560/05HO ¾”BSP(M)

Product Images

Approval Holder:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company